Two Axes Solar Tracker Based on Solar Maps, Controlled by a Low-Power Microcontroller

There are actually several solutions for two axis solar tracking systems using electromechanical devices, in which a controller detects the Sun apparent position, and controls the position of the structure supporting the panels toward the sun by enabling the engines movement. This work studies the solution of two axis solar tracking system based on solar maps, which can predict the exact apparent position of the Sun, by the latitude＇s location, thereby avoiding the need to use sensors or guidance systems. To accomplish this, it is used a low-power microcontroller, suitably programmed, to control two electric motors to ensure that the panels supporting structure is always oriented towards the sun.

On-Chip Micro Temperature Controllers Based on Freestanding Thermoelectric Nano Films for Low-Power Electronics

Multidimensional integration and multifunctional com-ponent assembly have been greatly explored in recent years to extend Moore’s Law of modern microelectronics.However,this inevitably exac-erbates the inhomogeneity of temperature distribution in microsystems,making precise temperature control for electronic components extremely challenging.Herein,we report an on-chip micro temperature controller including a pair of thermoelectric legs with a total area of 50×50μm^(2),which are fabricated from dense and flat freestanding Bi2Te3-based ther-moelectric nano films deposited on a newly developed nano graphene oxide membrane substrate.Its tunable equivalent thermal resistance is controlled by electrical currents to achieve energy-efficient temperature control for low-power electronics.A large cooling temperature difference of 44.5 K at 380 K is achieved with a power consumption of only 445μW,resulting in an ultrahigh temperature control capability over 100 K mW^(-1).Moreover,an ultra-fast cooling rate exceeding 2000 K s^(-1) and excellent reliability of up to 1 million cycles are observed.Our proposed on-chip temperature controller is expected to enable further miniaturization and multifunctional integration on a single chip for microelectronics.

Low-power system model for quantum entangled photon-pair source

The quantum entangled photon-pair source,as an essential component of optical quantum systems,holds great potential for applications such as quantum teleportation,quan-tum computing,and quantum imaging.The current workhorse technique for preparing photon pairs involves performing spon-taneous parametric down conversion(SPDC)in bulk nonlinear crystals.However,the current power consumption and cost of preparing entangled photon-pair sources are relatively high,pos-ing challenges to their integration and scalability.In this paper,we propose a low-power system model for the quantum entan-gled photon-pair source based on SPDC theory and phase matching technology.This model allows us to analyze the per-formance of each module and the influence of component cha-racteristics on the overall system.In our experimental setup,we utilize a 5 mW laser diode and a typical type-II barium metabo-rate(BBO)crystal to prepare an entangled photon-pair source.The experimental results are in excellent agreement with the model,indicating a significant step towards achieving the goal of low-power and low-cost entangled photon-pair sources.This achievement not only contributes to the practical application of quantum entanglement lighting,but also paves the way for the widespread adoption of optical quantum systems in the future.

Cost-Effective Monitoring of the Fuel Air Equivalence-Ratio with a Lambda Sensor and a Microcontroller in a Downdraft Biomass Gasifier

The operation of biomass treatment devices such as gasifiers is based on the control of key parameters that play an important role in product formation. These include: temperature, excess oxygen, relative humidity and biomass composition. This work focuses on excess oxygen and temperature. Unfortunately, flue gas oxygen analyzers are expensive and not accessible to small industries. However, the equivalence ratio is linked to excess oxygen and has the advantage of not depending on biomass composition. This study therefore focuses on the design and development of a device for controlling this equivalence ratio by measuring oxygen concentration using a self-propelled Lambda probe, and a system for monitoring this equivalence ratio using an Arduino Uno 3 microcontroller. The temperature is recorded with an accuracy of ±1.5°C. For a heating time of 10 minutes, the response time to temperature change is around 3 seconds, which is sufficient for the device to function properly. This simple device is an efficient and cost-effective means of checking the equivalence ratio.

Design of Intelligent Window Automatic Monitoring System Based on Microcontroller Control

To ensure the safety of residents’lives and property by using automatic opening and closing of ordinary windows,this article designs an intelligent window automatic monitoring system.The article proposes a software and hardware design scheme for the system,which comprises a microcontroller control module,temperature and humidity detection module,harmful gas detection module,rainfall detection module,human thermal radiation induction module,Organic Light-Emitting Diode(OLED)display module,stepper motor drive module,Wi-Fi communication module,etc.Users use this system to monitor environmental data such as temperature,humidity,rainfall,harmful gas concentrations,and human health.Users can control the opening and closing of windows through manual,microcontroller,and mobile application(app)remote methods,providing users with a more convenient,comfortable,and safe living environment.

基于ArchC进行嵌入式Microcontroller设计研究

介绍了一种实用的以SystemC为基础的体系结构描述语言(ADL)—ArchC,首先简单对ArchC软件工具包进行了说明,接着重点介绍了以ArchC为工具进行Microcontroller设计的原理和简单流程,并说明了其关键技术,最后作了一个简单的总结.

A kind of low-power 10 Gbit/s CMOS 1∶4 demultiplexer

A 10 Gbit/s 1：4 demultiplexer（DEMUX） fabricated in 0. 18 μm CMOS （complementary metal-oxidesemiconductor transistor） technology for optical-fiber-link is presented. The system is constructed in tree-type structure and it includes a high-speed 1 ： 2 DEMUX, two low-speed 1 ： 2 DEMUXs, a divider, and input and output buffers for data and dock. To improve the circuit performance and reduce the power consumption, a latch structure with a common-gate topology and a single clock phase is employed in the high-speed 1 ： 2 DEMUX and the 5 GHz 1 ： 2 on-chip frequency divider, while dynamic CMOS logic is adopted in the low-speed l ： 2 DEMUXs. Measured results at 10 Gbit/s by 23^31 -1 pseudo random bit sequences （PRBS） via on-wafer testing indicate that it can work well with a power dissipation of less than 100 mW at 1.8 V supply voltage. The die area of the DEMUX is 0. 65 mm × 0. 75 mm.

Low-power laser irradiation promotes the proliferation and osteogenic differentiation of human periodontal ligament cells via cyclic adenosine monophosphate

Retaining or improving periodontal ligament （PDL） function is crucial for restoring periodontal defects. The aim of this study was to evaluate the physiological effects of low-power laser irradiation （LPLI） on the proliferation and osteogenic differentiation of human PDL （hPDL） cells. Cultured hPDL cel Is were irradiated （660 nm） daily with doses of O, 1, 2 or 4 J .cm-2. Cell proliferation was evaluated by the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide （MTT） assay, and the effect of LPLI on osteogenic differentiation was assessed by Alizarin Red S staining and alkaline phosphatase （ALP） activity. Additionally, osteogenic marker gene expression was confirmed by real-time reverse transcription-polymerase chain reaction （RT-PCR）. Our data showed that LPLI at a dose of 2 J.cm-2 significantly promoted hPDL cell proliferation at days 3 and 5. In addition, LPLI at energy doses of 2 and 4 J.cm-2 showed potential osteogenic capacity, as it stimulated ALP activity, calcium deposition, and osteogenic gene expression. We also showed that cyclic adenosine monophosphate （cAMP） is a critical regulator of the LPLI-mediated effects on hPDL cells. This study shows that LPLI can promote the proliferation and osteogenic differentiation of hPDL cells. These results suggest the potential use of LPLI in clinical applications for periodontal tissue regeneration.

Modelling Study to Compare the Flow and Heat Transfer Characteristics of Low-Power Hydrogen,Nitrogen and Argon Arc-Heated Thrusters

A modelling study is performed to compare the plasma flow and heat transfer characteristics of low-power arc-heated thrusters （arcjets） for three different propellants： hydrogen, nitrogen and argon. The all-speed SIMPLE algorithm is employed to solve the governing equations, which take into account the effects of compressibility, Lorentz force and Joule heating, as well as the temperature- and pressure-dependence of the gas properties. The temperature, velocity and Mach number distributions calculated within the thruster nozzle obtained with different propellant gases are compared for the same thruster structure, dimensions, inlet-gas stagnant pressure and arc currents. The temperature distributions in the solid region of the anode-nozzle wall are also given. It is found that the flow and energy conversion processes in the thruster nozzle show many similar features for all three propellants. For example, the propellant is heated mainly in the near-cathode and constrictor region, with the highest plasma temperature appearing near the cathode tip; the flow transition from the subsonic to supersonic regime occurs within the constrictor region; the highest axial velocity appears inside the nozzle; and most of the input propellant flows towards the thruster exit through the cooler gas region near the anode-nozzle wall. However, since the properties of hydrogen, nitrogen and argon, especially their molecular weights, specific enthMpies and thermal conductivities, are different, there are appreciable differences in arcjet performance. For example, compared to the other two propellants, the hydrogen arcjet thruster shows a higher plasma temperature in the arc region, and higher axial velocity but lower temperature at the thruster exit. Correspondingly, the hydrogen arcjet thruster has the highest specific impulse and arc voltage for the same inlet stagnant pressure and arc current. The predictions of the modelling are compared favourably with available experimental results.

EXPERIMENTAL STUDY ON MACRO AND MICRO-STRUCTURE OF METALLIC PARTS BUILT BY LOW-POWER LASER CLADDING

A low-power CO_2 laser is used to deposit Fe powder and mixture of Fe andcarbon powder on substrates respectively, and the macro and micro-structure of the formed samplesare investigated. It is demonstrated that most grains of these samples are equi-axed. This isderived from the high nucleation velocity in the shallow melt pool besides rapid solidification ofthe liquid-state alloy or metal. Bainitic structure, combination of pearlite and ferrite structureand ferrite structure are seen respectively in the samples involving various amounts of carbon owingto no martensitic transformation in these small samples.

Improved direct power injection model of 16-bit microcontroller for electromagnetic immunity prediction

To promote the modeling standardization process of the integrated circuits, an improved electrical simulation model for a direct power injection （DPI） setup which was used to measure the conducted immunity of a 16-bit microcontroller to radio frequency aggression was investigated. Based on the existing model of the same microcontroller, the PDN module was modified by adding the core, PLL and MD network models, which could reflect the actual electric distribution situation within the microcontroller more accurately. By comparing the simulation results with the measurement results, the effectiveness of the modified model can be improved to 500 MHz, and its uncertainty is within ＋1.8 dB （＋2 dB is acceptable）. Then, to improve the simulation accuracy of the complete model in the high frequency range, the I/O model which contained the dynamic and nonlinear characteristics reflecting the variation of the internal impedance of the microcontroller with increasing the frequency of the external noise was introduced. By comparing the simulation results with the measurement results, the effectiveness of the second modified model can be improved up to 1.4 GHz with the uncertainty of ~1.8 dB. Thus, a conclusion can be reached that the proposed model can be applied to a much wider frequency range with a smaller uncertainty than the latest model of the similar type. Furthermore, associated with the electromagnetic emission testing platform model, the PDN module can also be used to predict the electromagnetic conducted and radiated emission characteristics. This modeling method can also be applied to other integrated circuits, which is very helpful to the standardization of the IC electromagnetic compatibility （EMC） modeling process.

Transplantation of low-power laser-irradiated olfactory ensheathing cells to promote repair of spinal cord injury in rats

BACKGROUND： Previous studies have demonstrated that low-power laser （LPL） irradiation can promote the regeneration of peripheral nerves and central nerves, as well as influence cellular proliferation. Therefore, it is thought to be a potential treatment for spinal cord injury. OBJECTIVE： Utilizing histological observations and behavioral evaluations, the aim of this study was to investigate the influence of transplanted olfactory ensheathing cells （OECs）, irradiated by LPL, on functional repair of rats following transversal spinal cord injury. DESIGN, TIME AND SETTING： A randomized, controlled, animal experiment was performed at the animal experimental center in the First Affiliated Hospital of Xinjiang Medical University between January 2007 and February 2008. MATERIALS： A total of 52 Sprague Dawley rats were included in this experiment. Twelve rats were used to harvest OECs, some of which were irradiated by LPL on days 3, 5, and 7 in culture. The remaining 40 rats were used to establish T12 complete spinal cord transection injury. DMEM/F12 medium was purchased from Sigma, USA, Fluorogold was provided by Chemicon, USA, and the LY/JG650-D500-16 low-power laser was produced by Xi＇an Lingyue Electromechanical Science And Technology Co., Ltd., China. METHODS： The successful rat models were randomly divided into three groups： OEC transplantation, LPL-irradiated OEC transplantation, and control. These animals were microinjected with OEC suspension, LPL-irradiated OEC suspension, and DMEM/F12 medium （10μL） respectively 4 weeks after spinal cord was completely transected at the T12 level. MAIN OUTCOME MEASURES： Spinal cord injury was observed using hematoxylin-eosin staining Expression of nerve growth factor receptor p75 and glial fibrillary acidic protein were determined using immunohistochemical staining. Regeneration of spinal nerve fibers in rats was assayed by Fluorogold retrograde labeling method. Basso, Beattie and Bresnahan （BBB） scores were used to evaluate motor functions of rat lower limbs. RESULTS： Structural disturbances were observed following spinal cord injury in each group, and a large amount of scar tissue covered the broken ends, accompanied by porosis and inflammatory cell infiltration. Following OEC transplantation, the distal end connected to the proximal end. nerve growth factor receptor p75 and glial fibrillary acidic protein immunohistochemistry revealed positive OECs in the cephalad and caudal area of rats that received LPL-irradiated OEC transplantation. In the OECs group, only glial fibrillary acidic protein staining was observed. No staining was found in the control group. Neural fibers labeled with Fluorogold extended across the lesion area and into the cephalad and caudal area in the OECs and LPL-irradiated OECs groups, but were not present in the control group. BBB scores revealed statistically significant differences among the three groups （P 〈 0.05）： OECs irradiated by LPL group 〉 OECs group 〉 control group. CONCLUSION： Transplantation of OECs and LPL-irradiated OECs promoted functional repair in the injured spinal cord of rats, although LPL-irradiated OECs resulted in greater beneficial effects.

The Features of Microcontroller EM78P447 and Technique of Port Connection with I^2C Series Bus

By describing the technique of port connection and flow chart ofR/W operation between 24LC01, serial E2PROM, and EM78P447A, features of EM78P447 and its connection with I2C serial bus are introduced. In the end, the programe of writing operation is given.

Reducing Power and Energy Consumption of Nonvolatile Microcontrollers with Transparent On-Chip Instruction Cache

Demands for low-energy microcontrollers have been increasing in recent years. Since most microcontrollers achieve user programmability by integrating nonvolatile (NV) memories such as flash memories for storing their programs, the large power consumption required in accessing an NV memory has become a major problem. This problem becomes critical when the power supply voltage of NV microcontrollers is decreased. We can solve this problem by introducing an instruction cache, thus reducing the access frequency of the NV memory. Unlike general-purpose microprocessors, microcontrollers used for real-time applications in embedded systems must accurately calculate program execution time prior to its execution. Therefore, we introduce a “transparent” instruction cache, which does not change the existing NV microcontroller’s cycle-level execution time, for reducing power and energy consumption, but not for improving the processing speed. We have conducted detailed microar chitecture design based on the architecture of a major industrial microcontroller, and we evaluated power and energy consumption for several benchmark programs. Our evaluation shows that the proposed instruction cache can successfully reduce energy consumption in a fairly wide range of practical NV microcontroller configurations.

A low-power high-throughput link splitting router for NoCs

In this paper, we propose a technique for lowering the latency of the communication in a NoC （network on chip）. The technique, which can support two qualities of service （QoS）, i.e., the guaranteed throughput （GT） and best effort （BE）, is based on splitting a wider link into narrower links to increase throughput and decrease latency in the NoC. In addition, to ease the synchronization and reduce the crosstalk, we use the l-of-4 encoding for the smaller buses. The use of the encoding in the proposed NoC architecture considerably lowers the latency for both BE and GT packets. In addition, the bandwidth is increased while the power consumption of the links is reduced.

Low-power laser irradiation inhibits arecoline-induced fibrosis:an in vitro study

Oral submucous fibrosis （OSF） is a potentially malignant disorder that is characterized by a progressive fibrosis in the oral submucosa. Arecoline, an alkaloid compound of the areca nut, is reported to be a major aetiological factor in the development of OSF. Low-power laser irradiation （LPLI） has been reported to be beneficial in fibrosis prevention in different damaged organs. The aim of this study was to investigate the potential therapeutic effects of LPLI on arecoline-induced fibrosis. Arecoline- stimulated human gingival fibroblasts （HGFs） were treated with or without LPLI. The expression levels of the fibrotic marker genes alpha-smooth muscle actin （a-SMA） and connective tissue growth factor （CTGF/CCN2） were analysed by quantitative real- time reverse transcription polymerase chain reaction （RT-PCR） and western blots. In addition, the transcriptional activity of CCN2 was further determined by a reporter assay. The results indicated that arecoline increased the messenger RNA and protein expression of CCN2 and a-SMA in HGF. Interestingly, both LPLI and forskolin, an adenylyl cyclase activator, reduced the expression of arecoline-mediated fibrotic marker genes and inhibited the transcriptional activity of CCN2. Moreover, pretreatment with SQ22536, an adenylyl cyclase inhibitor, blocked LPLI＇s inhibition of the expression of arecoline-mediated fibrotic marker genes. Our data suggest that LPLI may inhibit the expression of arecoline-mediated fibrotic marker genes via the cAMP signalling pathway.

Design of Low-Power Data Logger of Deep Sea for Long-Term Field Observation

This paper describes the implementation of a data logger for the real-time in-situ monitoring of hydrothermal systems. A compact mechanical structure ensures the security and reliability of data logger when used under deep sea. The data logger is a battery powered instrument, which can connect chemical sensors （pH electrode, H2S electrode, H2 electrode） and temperature sensors. In order to achieve major energy savings, dynamic power management is implemented in hardware design and software design. The working current of the data logger in idle mode and active mode is 15 μA and 1.44 mA respectively, which greatly extends the working time of battery. The data logger has been successftdly tested in the first Sino-American Cooperative Deep Submergence Project from August 13 to September 3, 2005.

An artificial synapse by superlattice-like phase-change material for low-power brain-inspired computing

Phase-change material(PCM)is generating widespread interest as a new candidate for artificial synapses in bioinspired computer systems.However,the amorphization process of PCM devices tends to be abrupt,unlike continuous synaptic depression.The relatively large power consumption and poor analog behavior of PCM devices greatly limit their applications.Here,we fabricate a GeTe/Sb2Te3 superlattice-like PCM device which allows a progressive RESET process.Our devices feature low-power consumption operation and potential high-density integration,which can effectively simulate biological synaptic characteristics.The programming energy can be further reduced by properly selecting the resistance range and operating method.The fabricated devices are implemented in both artificial neural networks(ANN)and convolutional neural network(CNN)simulations,demonstrating high accuracy in brain-like pattern recognition.

Mechanisms for non-ideal flow in low-power arc-heated supersonic nozzles

The flow in a low-powered arc gas heater com- bined with a supersonic nozzle of throat diameter less than 1 mm is quite complicated and difficult to describe in quan- titative detail. Experiments on arc-heated supersonic jet thrusters of monatomic gases argon and helium have been carried out and their performance measured. The flow charac- teristics are analyzed with the help of numerical simulation. Results show that the viscous effect is the most important factor causing the large difference between ideal and real performance. A large outer section of the exit flow is slow- moving. This is especially pronounced in helium, where 70 % of the exit area of the nozzle might be in subsonic flow. Fric- tion forces can be much larger than the net thrust, reaching several times higher in helium, resulting in very low efficien- cies. Other factors causing the differences between ideal and real flow include： complex flow in the throat region, electric arc extending to the nozzle expansion section, heat transfer to the inlet gas and from the hot plasma, and environmen- tal pressure in the vacuum chamber. It is recognized that the ordinary concepts of supersonic nozzle flow must be greatly modified when dealing with such complicated situations. The general concepts presented in this paper could be helpful in guiding the design and operation of this equipment.

Design and Implementation of Electronic Control Trainer with PIC Microcontroller

This paper describes the implementation of a PIC microcontroller in a conventional laboratory-type electronic trainer. The work comprises software for the PIC and hardware for the software. The PIC controller uses an EasyPIC6 board and includes a PC-interfaced programmer for the PIC chip. It has many external modules: 128 × 64 graphic LCD display, 2 × 16 LCD display, 4 × 4 keypad, and port expander, all in the same bench. The trainer is capable of 36 experiments in logic/analogue electronic and control systems. A 5-sided approximate sensor, two photoelectric sensors (BR56-DDT-P and BEN9M-TFR), four CMOS, four BCD-7-segment driven by CD4511B, two relays (2-pole and 3-pole), six voltages, ammeter measurement, DC motor, and 24VDC power supply, connect through connectors and pinions. Results of all the experiments show the trainer satisfying requirements of undergraduate and postgraduate projects involving conventional electronic and classical control systems.