Micro-geological causes and macro-geological controlling factors of low-resistivity oil layers in the Puao Oilfield

Low-resistivity oil layers are often missed in logging interpretation because of their resistivity close to or below the resistivity of nearby water layers. Typical low-resistivity oil layers have been found in the past few years in the Putaohua reservoir of the Puao Oilfield in the south of the Daqing placanticline by detailed exploration. Based on a study of micro-geological causes of low-resistivity oil layers, the macro-geological controlling factors were analyzed through comprehensive research of regional depositional background, geological structure, and oil-water relations combined with core, water testing, well logging, and scanning electron microscopy data. The results showed that the formation and distribution of Putaohua low-resistivity oil layers in the Puao Oilfield were controlled by depositional environment, sedimentary facies, diagenesis, motive power of hydrocarbon accumulation, and acidity and alkalinity of reservoir liquid. The low-resistivity oil layers caused by high bound-water saturation were controlled by deposition and diagenesis, those caused by high free-water saturation were controlled by structural amplitude and motive power of hydrocarbon accumulation. Those caused by formation water with high salinity were controlled by the ancient saline water depositional environment and faulted structure and those caused by additional conductivity of shale were controlled by paleoclimate and acidity and alkalinity of reservoir liquid. Consideration of both micro-geological causes and macro-geological controlling factors is important in identifying low-resistivity oil layers.

Logging-based assessment of low-resistivity oil zones:A case study from Sudan

The reservoirs in the N oilfield in Sudan feature a complex sedimentary environment,which has led to a widespread development of low-resistivity oil zones,accounting for as high as 37%of the total oil zones.In this case,a large number of oil zones will be misinterpreted using conventional methods.Based on the analysis of the core data and logging curves of the study area,this study concludes that the lowresistivity oil zones are formed mainly due to the high irreducible water saturation caused by the high content of illite and smectite and complex pore structure,the additional electrical conductivity induced by clay minerals,and the difference in formation water salinity between the oil zones and water zones.Furthermore,four methods are proposed to qualitatively identify these oil zones and water zones,namely the relationship analysis of five reservoir properties,cross-plotting of sensitive parameters,analysis of pressure testing data,and multi-well correlation.Furthermore,the study quantitatively calculates the initial oil saturation using the capillary pressure data,thus avoiding the conventional empirical saturation formulas depending on electrical resistivity and solving the difficulty in calculating oil saturation of low-resistivity oil zones.Finally,precise logging processing and interpretation of 95 wells in the study area are conducted using the above-mentioned comprehensive assessment system for low-resistivity oil zones.As a result,59 oil zones are newly discovered in 43 wells.Moreover,it is recommended that 17 oil zones in 12 wells should be tested,of which 11 oil zones have been tested as recommended,all proven to be high production oil zones after perforation.The coincidence rate of logging interpretation increases from 75%to 94.3%,and the original oil in place(OOIP)increases by 57.42 million barrels.All these indicate that the assessment system proposed is suitable for low-resistivity zones.

The superhydrophobic sponge decorated with Ni-Co double layered oxides with thiol modification for continuous oil/water separation

In this paper, the superhydrophobic polyurethane sponge(SS-PU) was facilely fabricated by etching with Jones reagent to bind the nanoparticles of Ni-Co double layered oxides(LDOs) on the surface, and following modification with n-dodecyl mercaptan(DDT). This method provides a new strategy to fabricate superhydrophobic PU sponge with a water contact angle of 157° for absorbing oil with low cost and in large scale. It exhibits the strong absorption capacity and highly selective characteristic for various kinds of oils which can be recycled by simple squeezing. Besides, the as-prepared sponge can deal with the floating and underwater oils, indicating its application value in handling oil spills and domestic oily wastewater. The good self-cleaning ability shows the potential to clear the pollutants due to the ultralow adhesion to water. Especially, the most important point is that the superhydrophobic sponge can continuously and effectively separate the oil/water mixture against the condition of turbulent disturbance by using our designed device system, which exhibit its good superhydrophobicity, strong stability.Furthermore, the SS-PU still maintained stable absorption performance after 150 cycle tests without losing capacity obviously, showing excellent durability in long-term operation and significant potential as an efficient absorbent in large-scale dispose of oily water.

Layered injection technology for chemical flooding of Class-Ⅲ oil reservoirs in the Daqing Oil Fields complex,Songliao Basin,Northeast China

The Class-Ⅲ oil reservoirs of Lasaxing oilfield in the Daqing Oil Fields complex have geological oil reserves of 1.86 billion tonnes,an oil recovery of 39%,with remaining reserves accounting for more than 45%of the total geological reserves of the oilfield.Therefore,they have considerable potential for future oil production.The current layered injection technologies fail to achieve effective control over the low single-layer injection rates since they can only produce low throttle differential pressure under low injection rates(5-20 m^(3)/d).In this study,a symmetrically-structured double-offset-hole injection allocator and a novel throttling component were developed.Their spatial layout was constructed and mechanical parameters were optimized using finite element analysis,which allows for expanding the flow rate range at low injection rates.According to experimental results,the throttle differential pressure increased from 0.2 MPa to 0.8 MPa at an injection rate of 5 m^(3)/d,and the range of the single-layer flow rates expanded from 20-70 m^(3)/d to 5-70 m3/d.The field test results show that the effective production of oil layers with medium and low permeability was achieved and that the ratio of producing oil layer thickness to the total reservoir thickness increased by 9.7%on average.Therefore,this study provides valuable technical support for the effective chemical-flooding-based development of Class-Ⅲ oil reservoirs.

Quantitative prediction model for the depth limit of oil accumulation in the deep carbonate rocks:A case study of Lower Ordovician in Tazhong area of Tarim Basin

With continuous hydrocarbon exploration extending to deeper basins,the deepest industrial oil accumulation was discovered below 8,200 m,revealing a new exploration field.Hence,the extent to which oil exploration can be extended,and the prediction of the depth limit of oil accumulation(DLOA),are issues that have attracted significant attention in petroleum geology.Since it is difficult to characterize the evolution of the physical properties of the marine carbonate reservoir with burial depth,and the deepest drilling still cannot reach the DLOA.Hence,the DLOA cannot be predicted by directly establishing the relationship between the ratio of drilling to the dry layer and the depth.In this study,by establishing the relationships between the porosity and the depth and dry layer ratio of the carbonate reservoir,the relationships between the depth and dry layer ratio were obtained collectively.The depth corresponding to a dry layer ratio of 100%is the DLOA.Based on this,a quantitative prediction model for the DLOA was finally built.The results indicate that the porosity of the carbonate reservoir,Lower Ordovician in Tazhong area of Tarim Basin,tends to decrease with burial depth,and manifests as an overall low porosity reservoir in deep layer.The critical porosity of the DLOA was 1.8%,which is the critical geological condition corresponding to a 100%dry layer ratio encountered in the reservoir.The depth of the DLOA was 9,000 m.This study provides a new method for DLOA prediction that is beneficial for a deeper understanding of oil accumulation,and is of great importance for scientific guidance on deep oil drilling.

Characteristics of the active-layer under the China-Russia Crude Oil pipeline

Active layer is a key component for permafrost environment studies as many subsurface biological,biogeochemical,ecological,and pedogenic activities prevail in this layer.This study focuses on active layer temperature monitoring in an area with sporadic permafrost at two adjacent sites along China-Russia Crude Oil Pipeline(CRCOP),NorthEast China.Site T1 is located in disturbed ground on the right-of-way(on-ROW)2 m away from the center of the oil pipeline.T2 is located in a natural and undisturbed site,around 16.6 m off-ROW.Our objective was to study seasonal variability of the active layer depth and thermal regime from October 2017 to September 2018.The monitoring sites consist of soil temperature probes arranged in a vertical array at different depths at both sites.The following parameters were computed:number of isothermal days(ID),freezing days(FD),thawing days(TD),freezing degree days(FDD),thawing degree days(TDD),number of freeze-thaw days(FTD).The mean air temperature in the monitoring period reached-3.2℃.The temperature profile indicates that the maximum active layer thickness observed during the study period was 10 m at T1 and 2 m at T2.The majority of the soil temperatures were above or close to 0℃,resulting in great values of TDD,especially in the first 4 m depth.TDD for T1 were predominant and ranged between 600-1160℃·days(0-4 m depth)reflecting the influence of oil temperature from the pipeline.In T2 borehole FDD were predominant for all the soil layer depths resulting in less permafrost degradation.This comparison emphasizes the significant influence of vegetation removal and the dispersed heat from the pipeline on the active layer thickness.

Zwitterionic monolayer grafted ceramic membrane with an antifouling performance for the efficient oil-water separation

Enormous demands on the separation of oil/water(O/W)emulsions in various industries,such as petrochemical,food and pharmaceutical industries,are looking for high performance and energy-efficient separation methods.Ceramic membranes have been used to deal with O/W emulsions,for its outstanding characteristics of easy-operation,high-flux,and long-term stability.However,membrane fouling is still a challenge in the industrial application of ceramic membranes.Herein,antifouling ceramic membranes were fabricated by grafting zwitterions on the membrane surface via an environment-friendly two-step grafting method,which improves the antifouling property and permeability.Successful grafting of such zwitterion on the ceramic surface was assessed by the combination of FTIR and XPS characterization.More importantly,the hydration can be formed by electrostatic interactions layer on the modified membrane,which was confirmed by TGA characterization.The antifouling performance of prepared zwitterionic ceramic membranes in the separation of O/W emulsions was systematically tested.The results suggested that zwitterion can significantly improve the flux of ceramic ultrafiltration membrane,and can also improve antifouling property dramatically by reducing the irreversible fouling in the separation of O/W emulsions.Therefore,zwitterionic ceramic membranes hold promising potentials as an antifouling,highly efficient and green method in the practical purification of the O/W emulsions.

Palm Oil Microencapsulation by Coacervation, Thin Layer Drying, and Silica Dioxide Absorption Technique

Indonesia is the largest palm oil producer in the world. The content of β-carotene in palm oil, which can act as pro-vitamin A, is relatively high, so it has great potential for overcoming cases of vitamin A deficiency. By microencapsulation process of palm oil, β-carotene content in palm oil will be more stable and have a longer shelf life. There are three methods of microencapsulation used in this study, namely coacervation, thin-layer drying, and SiO2 absorption technique, which theoretically are suitable for encapsulating β-carotene in palm oil. The aim of this research is to compare and find the most suitable method of microencapsulation process of palm oil to obtain the highest β-carotene content and retention. Results show that those three methods are significantly different in affecting water absorption, solubility in water, yield, microencapsulation efficiency, β-carotene content, and retention of microencapsulated palm oil. The microencapsulated palm oil made from thin layer drying method has the highest β-carotene content at 200.16 μg/g and β-carotene retention of 68.89%. It also has low water absorption and high water solubility, so it can be applied as a powder premix in food as vitamin A supplement.

Application of Thin Layer Chromatography in Preparation of Drug Containing Serum of Eucalyptus Oil

[Objectives] To explore whether the thin layer chromatography( TLC) can be used to guide the preparation of drug containing serum of eucalyptus oil. [Methods]Eucalyptus oil samples with different dilution ratio were detected by TLC. Eucalyptus oil was intragastrically administered to mice,serum samples of different eucalyptus oil doses,different intragastric administration methods and different blood sampling times were collected. The above samples were detected by TLC,and the above results were verified by gas chromatography. [Results] TLC can detect concentration difference of eucalyptus oil samples with different dilution ratio. TLC can provide qualitative and semi-quantitative detection of eucalyptus oil in serum. High,medium and low dose of eucalyptus oil in serum had different effects on the growth of MCF-7 cells in the SD rats( P < 0. 05). [Conclusions] TLC can be used to guide the preparation of drug containing serum of eucalyptus oil.

Pore structure differences of the extra-low permeability sandstone reservoirs and the causes of low resistivity oil layers: A case study of Block Yanwumao in the middle of Ordos Basin, NW China

The influence of pore structure difference on rock electrical characteristics of reservoir and oil reservoir was analyzed taking Triassic Chang 6 reservoir in Block Yanwumao in the middle of Ordos Basin as an example. The relationship between the pore structure difference and the low resistivity oil layer was revealed and demonstrated through core observation, lab experiments, geological research, well log interpretation and trial production etc. The results show that there were two kinds of oil layers in Chang 6 oil layer set, normal oil layer and low resistivity oil layer in the region, corresponding to two types of pore structures, pore type mono-medium and micro-fracture-pore type double-medium; the development of micro-fracture changed greatly the micro-pore structure of the reservoir, and the pore structure difference had an important influence on the rock electrical characteristics of the extra-low permeability sandstone reservoir and oil reservoir; the normal oil layers had obvious characteristics of pore-type mono-medium, and were concentrated in Chang 61, Chang 6232 and Chang 62; the low resistivity oil layers had obvious characteristics of micro-fracture-pore type double-medium, which were mainly distributed in Chang 612 and Chang 63. The mud filtrate penetrated deep into the oil layers along the micro-cracks, leading to sharp reduction of resistivity, and thus low resistivity of the oil layer; the low resistivity oil layers had better storage capacity and higher productivity than the normal oil layers.

Development of Layered Treatment Technique for Multiple Heavy Oil Reservoirs

ＤｅｖｅｌｏｐｍｅｎｔｏｆＬａｙｅｒｅｄＴｒｅａｔｍｅｎｔＴｅｃｈｎｉｑｕｅｆｏｒＭｕｌｔｉｐｌｅＨｅａｖｙＯｉｌＲｅｓｅｒｖｏｉｒｓＨｕＺｈｉｍｉａｎａｎｄＷｕＤｅｈｕａ（ＤｒｉｌｌｉｎｇａｎｄＯｉｌＰｒｏｄｕｃｔｉｏｎＴｅｃｈｎｉｑｕｅＲｅｓｅａ...

Shale oil enrichment evaluation and production law in Gulong Sag,Songliao Basin,NE China

Based on the results of drilling,tests and simulation experiments,the shales of the Cretaceous Qingshankou Formation in the Gulong Sag of the Songliao Basin are discussed with respect to hydrocarbon generation evolution,shale oil occurrence,and pore/fracture evolution mechanism.In conjunction with a substantial amount of oil testing and production data,the Gulong shale oil enrichment layers are evaluated and the production behaviors and decline law are analyzed.The results are drawn in four aspects.First,the Gulong shales are in the stage of extensive hydrocarbon expulsion when R_(0) is 1.0%-1.2%,with the peak hydrocarbon expulsion efficiency of 49.5%approximately.In the low-medium maturity stage,shale oil migrates from kerogen to rocks and organic pores/fractures.In the medium-high maturity stage,shale oil transforms from adsorbed state to free state.Second,the clay mineral intergranular pores/fractures,dissolution pores,and organic pores make up the majority of the pore structure.During the transformation,clay minerals undergo significant intergranular pore/fracture development between the minerals such as illite and illite/smectite mixed layer.A network of pores/fractures is formed by organic matter cracking.Third,free hydrocarbon content,effective porosity,total porosity,and brittle mineral content are the core indicators for the evaluation of shale oil enrichment layers.Class-I layers are defined as free hydrocarbon content equal or greater than 6.0 mg/g,effective porosity equal or greater than 3.5%,total porosity equal or greater than 8.0%,and brittle mineral content equal or greater than 50%.It is believed that the favourable oil layers are Q2-Q3 and Q8-Q9.Fourth,the horizontal wells in the core area of the light oil zone exhibit a high cumulative production in the first year,and present a hyperbolic production decline pattern,with the decline index of 0.85-0.95,the first-year decline rate of 14.5%-26.5%,and the single-well estimated ultimate recovery(EUR)greater than 2.0×10^(4)t.In practical exploration and production,more efforts will be devoted to the clarification of hydrocarbon generation and expulsion mechanisms,accurate testing of porosity and hydrocarbon content/phase of shale under formation conditions,precise delineation of the boundary of enrichment area,relationship between mechanical properties and stimulated reservoir volume,and enhanced oil recovery,in order to improve the EUR and achieve a large-scale,efficient development of shale oil.

Deepwater and Deep Layers： the Strategic Choices for China＇s Oil and Gas Resources Development

On December 2,2017,the 2^(nd) Seminaron the Development Strategy of China‘s Oil and Gas Resources was held in Beijing.This seminar was hosted by the Strategic Research Center for Oil and Gas Resources,Ministry of Land(MLR)and Resources and sponsored by both the CNOOC Exploration Department and the School of Ocean and Earth Sciences of Tongji University.With the theme of"deepwater and deep-layer oil and gas resources and development strategy",the

Seismic identification of channel sandbodies in the Fuyang oil layer in North Songliao Basin, China

在北方 Songliao 盆的 Fuyang 油层被描绘由薄内部 bedded 沙和页岩，强壮的侧面的变化，强壮的水库 heterogeniety 等等。单个沙层的厚度通常是 3 5 m。用地震技术识别 Fuyang 油层的隧道沙身体由于低地震决定是很困难的。作为一个例子拿 GTZ 区域，我们讨论隧道沙身体的基因特征并且在使用地震技术预言隧道沙身体指出真实困难。为隧道的鉴定的二个方法被介绍：频率光谱成像并且预先叠方位角的 anisotropy。用二个地震方法在 Fuyu 油层识别隧道沙身体与井数据相比导致成功率直到 80% 。

Calculating single layer production contribution of heavy oil commingled wells by analysis of aromatic parameters in whole-oil GC-MS

Traditional fluid production profile logging is not usually suitable for heavy-viscous crude oil wells.Biodegradation of heavy oil can lead to the loss of n-alkanes,and the use of chromatogram fingerprint techniques in studying the production contributions of single layers in heavy oil commingled wells has limitations.However,aromatic compounds are relatively well preserved.We took the heavy oil commingled wells of small layers NG55 and NG61 in the ninth area of the Gudong oil field as examples.Based on the principle of chromatography,the whole-oil GC-MS was used,and the aromatic parameters which have a strongly linear relationship with the ratio of mixed two end member oils were verified and selected in laboratory.Studies showed that the ratio of （1,4,6-＋ 2,3,6-trimethylnaphthalene） to 1,2,5-trimethylnaphthalene has a strongly linear relationship with the ratio of the mixed two end member oils （R2=0.992）.The oil contributions from single layers NG55 and NG61 in six commingled heavy oil wells were calculated using established charts and this relationship.The calculated results are consistent with the results of long period dynamic monitoring and logging interpretation in the study area and can provide a scientific basis for monitoring production performance and hierarchical management of reservoirs.The study provides a new geochemical method for calculation of the contributions of single layers in heavy oil commingled wells when conventional fluid production profile logging is not suitable.

大庆油田裸眼井测井技术进展与展望

为了提高大庆油田裸眼井测井技术支撑能力和研究成果领先水平,全面回顾了大庆油田测井采集系列及解释技术的创新发展历程,系统总结了特高含水期剩余油解释、火山岩等复杂岩性测井评价、碎屑岩储量参数解释、非常规油气“甜点”分类、缝洞型碳酸盐岩储层测井评价等油田勘探开发测井评价技术。在客观分析大庆油田勘探开发测井解释评价需求和面临瓶颈问题的基础上,结合当前油田测井评价对象规模小、物性差、埋藏深、地层结构复杂、非均质性强的特点。指明了测井解释评价核心技术主攻方向。围绕新阶段测井采集及解释评价技术体系完善与建立,对高分辨率和成像测井采集、后油藏时期和非常规测井解释评价、新一代智能解释技术体系等未来发展进行了展望。

稠油井内衬保温油管热损失分析及开采参数优化

针对塔河油田稠油开采过程中原油热量损失大、资源浪费的问题,开展内衬保温油管开采技术研究。基于井筒稳态热传递与地层非稳态热传递理论,建立了稠油井井筒热传递数学模型,评价了不同内衬材料油管的保温性能,揭示了含水率、日产液量及内衬保温油管下深对井筒温度的影响规律。研究表明:内衬聚酮防腐层与气凝胶保温层的保温油管保温性能最佳,日产液量和保温油管下深对井口温度影响较大,含水率对井口温度的影响较小;日产液量大于72 t/d且保温油管下深大于3 500 m时,可满足稠油开采的温度要求。该研究明确了内衬保温油管保温的可行性,可为油田保温油管内衬的选材、稠油开采工艺参数的制订提供技术依据。

奥连特盆地隐蔽油藏高效滚动勘探开发方法技术及应用——以厄瓜多尔14和17区块为例

厄瓜多尔14和17区块位于奥连特盆地前渊带,主要含油层系为Napo组的M1,U和T段。现已开发油田进入高含水阶段,资源接替面临挑战。通过基于趋势面驱动的叠后地震数据连片一致性处理、时-频衰减高精度合成记录标定和解释及各向异性变速成图,精细刻画了低幅度构造,发现了一批低幅度构造油藏。采用分频迭代去噪拾取薄层弱反射系数,以其重构的叠后宽频有效信号为约束,采用相控波形非线性反演,定量预测了埋深3 000 m的2~5 m厚潮汐水道砂岩,发现了多个M1超薄层岩性油藏。依据区域水动力条件、低幅度构造油藏油-水界面趋势及油藏能量特征,发现了LU水动力油藏并滚动扩边。通过观察大量岩心薄片,发现海绿石在石英砂岩储层中呈胶结物和颗粒两种赋存状态,建立了海绿石双组构测井解释体积模型,评价并识别了UT低电阻率油藏。基于热带雨林地表和隐蔽油藏特点,按照“整体部署、分批实施、跟踪评价、及时调整”的策略,实现滚动勘探、评价和快速建产,探井和评价井成功率大于90%。

多分支废弃油井层温衰减规律及注入参数对注采性能的影响

利用废弃油井开发地热资源是降低地热开发成本、促进商业推广的有效措施,其中层温衰减规律对地热系统取热效果具有重要影响。为此,以废弃油井储层为研究对象,结合泰森多边形理论对储层裂缝进行了划分,建立了三维油水两相热流耦合数值模型,分析了不同储层条件与布井结构下的层温衰减规律,探究了注入参数等因素对地热注采性能的影响。研究结果表明:(1)低渗透储层抽采30年生产温度最大差值可达22.08 K,高渗透储层(1.0×10^(-13) m^(2))温度过度衰减,长年限采热效率低;(2)储层含油率与生产温度和发电功率呈正相关关系,生产30年后差值最大可达11.57 K与0.12 MW;(3)分支井沿垂直方向会形成低温波谷,层温衰减高于储层其余部分,数量增加对注采影响小;(4)注入速率与发电功率、生产温度分别呈正、负相关关系,但注入速率超过89 kg/s时不利于长年限开采。结论认为:(1)储层取热性能对初始渗透率最为敏感,注入速率与储层含油率次之,优先开发低渗透储层有利于长年限采热;(2)应利用油田地热降低稠油黏度,形成地热辅助采油模式,以实现经济效应最大化;(3)选取6支分支井与89 kg/s的注入速率可得到可观取热效果和较好的经济效益。