Impact of Initial Soil Conditions on Soil Hydrothermal and Surface Energy Fluxes in the Permafrost Region of the Tibetan Plateau

Accurate initial soil conditions play a crucial role in simulating soil hydrothermal and surface energy fluxes in land surface process modeling.This study emphasized the influence of the initial soil temperature(ST)and soil moisture(SM)conditions on a land surface energy and water simulation in the permafrost region in the Tibetan Plateau(TP)using the Community Land Model version 5.0(CLM5.0).The results indicate that the default initial schemes for ST and SM in CLM5.0 were simplistic,and inaccurately represented the soil characteristics of permafrost in the TP which led to underestimating ST during the freezing period while overestimating ST and underestimating SLW during the thawing period at the XDT site.Applying the long-term spin-up method to obtain initial soil conditions has only led to limited improvement in simulating soil hydrothermal and surface energy fluxes.The modified initial soil schemes proposed in this study comprehensively incorporate the characteristics of permafrost,which coexists with soil liquid water(SLW),and soil ice(SI)when the ST is below freezing temperature,effectively enhancing the accuracy of the simulated soil hydrothermal and surface energy fluxes.Consequently,the modified initial soil schemes greatly improved upon the results achieved through the long-term spin-up method.Three modified initial soil schemes experiments resulted in a 64%,88%,and 77%reduction in the average mean bias error(MBE)of ST,and a 13%,21%,and 19%reduction in the average root-mean-square error(RMSE)of SLW compared to the default simulation results.Also,the average MBE of net radiation was reduced by 7%,22%,and 21%.

Evaluation of the coupled impact of silicon oxide nanoparticles and low-salinity water on the wettability alteration of Berea sandstones

This study investigated experimentally the coupled effects of hydrophilic SiO_(2) nanoparticles(NPs)and low-salinity water(LSW)on the wettability of synthetic clay-free Berea sandstone.Capillary pressure,interfacial tension(IFT),contact angle,Zeta potential,and dynamic displacement measurements were performed at various NP mass fractions and brine salinities.The U.S.Bureau of Mines(USBM)index was used to quantify the wettability alteration.Furthermore,the NP stability and retention and the effect of enhanced oil recovery by nanofluid were examined.The results showed that LSW immiscible displacement with NPs altered the wettability toward more water wet.With the decreasing brine salinity and increasing NP mass fraction,the IFT and contact angle decreased.The wettability alteration intensified most as the brine salinity decreased to 4000 mg/L and the NP mass fraction increased to 0.075%.Under these conditions,the resulting incremental oil recovery factor was approximately 13 percentage points.When the brine salinity was 4000 mg/L and the NP mass fraction was 0.025%,the retention of NPs caused the minimum damage to permeability.

Effect of different process conditions on the physicochemical and antimicrobial properties of plasma-activated water

The physicochemical properties of plasma-activated water(PAW)generated under different process conditions were investigated,and their changes under different storage conditions were also studied.The results showed that increasing the processing time and power,and decreasing generated water volume,could cause an increase in the redox potential,conductivity,and temperature of PAW,and a decrease in its pH.A slower dissipation of the reactive oxygen and nitrogen species in PAW was found on storage at 4℃in a sealed conical flask than on storage at room temperature.The inactivation ability of plasma-activated lactic acid(LA)to Listeria monocytogenes(L.monocytogenes)and Pseudomonas aeruginosa(P.aeruginosa)was higher than that of PAW or LA alone under the same experimental conditions.The results of this study may provide theoretical information for the application of PAW as a potential antimicrobial agent in the future.

Combined imbibition system with black nanosheet and low-salinity water for improving oil recovery in tight sandstone reservoirs

Nanomaterials and low-salinity water(LSW)are two popular enhanced oil recovery(EOR)methods that have been widely studied in recent years.The former is used for in-depth conformance improvement and the latter for microscopic oil displacement(by altering the potential and contact angle).However,there are few literature on combining them to achieve synergistic effects,especially for tight sandstone res-ervoirs.Based on the reservoir conditions of the Jimusar Oilfield,this study investigated the oil recovery mechanism of the combined imbibition system,which was composed of black nanosheet(BN)and LSW.Its performances including decreasing interfacial tension,emulsification,and wettability alterations were evaluated.The imbibition differences between the single system of BN and LSW and the combined BN-LsW imbibition system were then compared.Results showed that the combined imbibition system had a better emulsification effect on the crude oil and could also alter the wettability of the core surface.Moreover,the combined system could increase both the imbibition rate and the ultimate oil recovery.The nuclear magnetic T2 spectrum also indicated that the addition of black nanosheets could divert more fluid into small pores and thus improve the microscopic sweep efficiency.

Enhancing fly ash utilization in backfill materials treated with CO_(2)carbonation under ambient conditions

The environmental concerns resulting from coal-fired power generation that produces large amounts of CO_(2)and fly ash are of great interest.To mitigate,this study aims to develop a novel carbonated CO_(2)-fly ash-based backfill(CFBF)material under ambient conditions.The performance of CFBF was investigated for different fly ash-cement ratios and compared with non-CO_(2)reacted samples.The fresh CFBF slurry conformed to the Herschel-Bulkley model with shear thinning characteristics.After carbonation,the yield stress of the fresh slurry increased significantly by lowering fly ash ratio due to gel formation.The setting times were accelerated,resulting in approximately 40.6%of increased early strength.The final strength decreased when incorporating a lower fly ash ratio(50%and 60%),which was related to the existing heterogeneous pores caused by rapid fluid loss.The strength increased with fly ash content above 70%because additional C-S(A)-H and silica gels were characterized to precipitate on the grain surface,so the binding between particles increased.The C-S(A)-H gel was developed through the pozzolanic reaction,where CaCO_(3)was the prerequisite calcium source obtained in the CO_(2)-fly ash reaction.Furthermore,the maximum CO_(2)uptake efficiency was 1.39 mg-CO_(2)/g-CFBF.The CFBF material is feasible to co-dispose CO_(2)and fly ash in the mine goaf as negative carbon backfill materials,and simultaneously mitigates the strata movement and water lost in post-subsurface mining.

Performance of low-salinity water flooding for enhanced oil recovery improved by SiO_2 nanoparticles

Low-salinity water injection has been utilized as a promising method for oil recovery in recent years. Low-salinity water flooding changes the ion composition or brine salinity for improving oil recovery. Recently, the application of nanoparticles with low-salinity water flooding has shown remarkable results in enhanced oil recovery(EOR). Many studies have been performed on the effect of nanofluids on EOR mechanisms. Their results showed that nanofluids can improve oil recovery when used in low-salinity water flooding. In this work, the effects of injection of low-salinity water and low-salinity nanofluid(prepared by adding SiO_2 nanoparticles to low-salinity water) on oil recovery were investigated. At first, the effects of ions were investigated with equal concentrations in low-salinity water flooding. The experimental results showed that the monovalent ions had better performance than the divalent ions because of them having more negative zeta potential and less ionic strength. Also, low-salinity water flooding recovered 6.1% original oil in place(OOIP) more than the high-salinity flooding. Contact angle measurements demonstrated that low-salinity water could reduce the contact angle between oil and water. Then in the second stage, experiments were continued by adding SiO_2 nanoparticles to the K+ solution which had the highest oil recovery at the first stage. The experimental results illustrated that the addition of Si02 nanoparticles up to 0.05 wt% increased oil recovery by about 4% OOIP more than the low-salinity water flooding.

Optimum conditions to treat high-concentration microparticle slime water with bioflocculants

We studied how bioflocculants,produced by white-rot fungi,affect flocculation in slime water.Based on a test in an orthogonal design,flocculation conditions were optimized.The results show that flocculation activity is at its highest when the following conditions are met:slime water concentration 27.42 g/L;coagulant aid(CaCl_2) mass concentration 5.0 g/L;two-segment stirrings:the first at a stirring speed of 60 r/min for 180 s and the second 180 r/min for 60 s;a pH of 11 and a flocculant concentration of 15 mL/L.The flocculation activity can be up to 98.71%of bioflocculants at the time.Further experiments indicate that most of the flocculation active material is found outside the mycelium cells.This is the extracellular secretion produced by mycelium cells during the fermentation process.This flocculant has strong thermal stability.Many kinds of cations have a flocculation function to assist bioflocculants.This aid-flocculation effect of the divalent cation Ca^(2+) is obvious in the bioflocculant produced by the white-rot fungus.Therefore,this is of great value when applied to control engineering in the battle against water pollution.

How much would silica nanoparticles enhance the performance of low-salinity water flooding?

Nanofluids and low-salinity water(LSW)flooding are two novel techniques for enhanced oil recovery.Despite some efforts on investigating benefits of each method,the pros and cons of their combined application need to be evaluated.This work sheds light on performance of LSW augmented with nanoparticles through examining wettability alteration and the amount of incremental oil recovery during the displacement process.To this end,nanofluids were prepared by dispersing silica nanoparticles(0.1 wt%,0.25 wt%,0.5 wt% and 0.75 wt%)in 2,10,20 and 100 times diluted samples of Persian Gulf seawater.Contact angle measurements revealed a crucial role of temperature,where no wettability alteration occurred up to 80 ℃.Also,an optimum wettability state(with contact angle 22°)was detected with a 20 times diluted sample of seawater augmented with 0.25 wt% silica nanoparticles.Also,extreme dilution(herein 100 times)will be of no significance.Throughout micromodel flooding,it was found that in an oil-wet condition,a combination of silica nanoparticles dispersed in 20 times diluted brine had the highest displacement efficiency compared to silica nanofluids prepared with deionized water.Finally,by comparing oil recoveries in both water-and oil-wet micromodels,it was concluded that nanoparticles could enhance applicability of LSW via strengthening wettability alteration toward a favorable state and improving the sweep efficiency.

Efficiency of enhanced oil recovery by injection of low-salinity water in barium-containing carbonate reservoirs

When low-salinity water containing sulfate ions is injected into carbonate reservoirs, rock dissolution and in situ precipitation occur, altering rock permeability and wettability. Particularly, when barium ions are present in formation water,they react chemically with SO;, and BaSO;is precipitated. These reactions can cause a serious impact on the efficiency of enhanced oil recovery（EOR）. Therefore, the main purpose of this study was to identify EOR efficiency induced by lowsalinity waterflooding（LSWF） when Ba;is present in carbonate reservoirs. From the experimental results, it was confirmed that the permeability calculated by the measured pressure difference was improved because of rock dissolution predominating over in situ precipitation for the case of low Ba;concentrations. In the analysis of wettability alteration through the measurements of relative permeabilities before and after LSWF, the higher Ba;concentration case consumed more SO;in precipitating the BaSO;, resulting in weaker wettability alteration due to the reduction of sulfate activity.These phenomena ultimately influenced EOR efficiency, i.e., the oil recovery was greater for the lower Ba;concentration.

Applying Periodic Boundary Conditions to Predict Open Water Propeller Performance

Mathematical models of propellers were created that investigate the influence of periodic boundary conditions on predictions of a propeller's performance.Thrust and torque coefficients corresponding to different advance coefficients of DTMB 4119, 4382, and 4384 propellers were calculated.The pressure coefficient distribution of the DTMB 4119 propeller at different sections was also physically tested.Comparisons indicated good agreement between the results of experiments and the simulation.It showed that the periodic boundary condition can be used to rationally predict the open water performance of a propeller.By analyzing the three established modes for the computation, it was shown that using the spline curve method to divide the grids can meet the calculation's demands for precision better than using the rake cutting method.

Stochastic and upscaled analytical modeling of fines migration in porous media induced by low-salinity water injection

Fines migration induced by injection of low-salinity water(LSW) into porous media can lead to severe pore plugging and consequent permeability reduction. The deepbed filtration(DBF) theory is used to model the aforementioned phenomenon, which allows us to predict the effluent concentration history and the distribution profile of entrapped particles. However, the previous models fail to consider the movement of the waterflood front. In this study, we derive a stochastic model for fines migration during LSW flooding, in which the Rankine-Hugoniot condition is used to calculate the concentration of detached particles behind and ahead of the moving water front. A downscaling procedure is developed to determine the evolution of pore-size distribution from the exact solution of a large-scale equation system. To validate the proposed model,the obtained exact solutions are used to treat the laboratory data of LSW flooding in artificial soil-packed columns. The tuning results show that the proposed model yields a considerably higher value of the coefficient of determination, compared with the previous models, indicating that the new model can successfully capture the effect of the moving water front on fines migration and precisely match the effluent history of the detached particles.

Three-dimensional Motion of Multichain-Buoy Mooring System in shallow Water and Survival Conditions

An engineering numerical model for three dimensional motion of multichain-buoy mooring system in shallow water and survival condition is given in this paper. Shooting-aim method is employed for solving the dynamic equations of chain system in order to match the computation of buoy motion. The responses of buoy and chain have been computed for different wind-wave-current directions and different rigidity of chain. The results show that the present numerical model is reasonable.

Effect of various Na/K ratios in low-salinity well water on growth performance and physiological response of Pacific white shrimp Litopenaeus vannamei

To investigate the influence of sodium to potassium （Na/IO ratios on the growth performance and physiological response of the Pacific white shrimp （Litopenaeus vananmei）, various concentrations of KC1 were added to low-salinity well water （salinity 4） in an 8-week culture trial. Six treatments with NWK ratios of 60：1, 42：1, 33：1, 23：1, 17：1, and 14：1 were replicated in triplicate. The highest weight-gain rate （3 506±48）% and survival rate （89.38±0.88）% was observed in well water with Na/K ratios of 23：1 and 42：1, respectively, while the feed conversion ratio （1.02～0.01）, oxygen consumption, and ammonia-N excretion rate was the lowest in the medium with a Na/K ratio of 23：1. Gill Na＋-K＋-ATPase activity, as an indicator of osmoregulation, peaked in the treatment where the Na/K ratio was 17：1. The total hemocyte count, respiratory burst, and immune-related enzyme activities （ALP, LSZ, PO, and SOD） ofL. vananmei were affected significantly by Na/K ratios （P〈0.05）. After challenged with Vibrio harveyi, the cumulative mortality of shrimp reared in a Na/K ratio of 23：1 （30±14.14）% was significantly lower than the control （75～7.07）%. In conclusion, the addition of K＋ to low-salinity well water in L. vannamei cultures is feasible. Na/K ratios ranging from 23：1 to 33：1 might improve survival and growth. Immunity and disease resistance are also closely related to the Na/K ratio of the low-salinity well water. The findings may contribute to the development of more efficient K^＋ remediation strategies for L. vananmei culture in low-salinity well water.

<i>In Vitro</i>Germination and Early Vegetative Growth of Five Tomato (<i>Solanum lycopersicum</i>L.) Varieties under Water Stress Conditions

Water is the main limiting factor in the cultivation of tomato (Solanum lycopersicum L.) in Senegal. Thus, the selection of varieties tolerant to water stress would be an alternative solution for their production. In vitro germination, growth, total chlorophyll and proline levels were studied in five varieties of tomato subjected to increasing osmotic pressures (0, 5, 10 and 15 kPa) thanks to the PEG-8000 incorporated in an MS/2 medium for 30 days. A strong sensitivity to water stress for in vitro seed germination in the Rodeo variety (41%) is recorded at 5 kPa and maintained at 15 kPa (20.83%) while it was only noticed at 15 kPa in the other tomato varieties. The Xewel and Lady Nema varieties obtained the smallest reductions in the number of leaves of vitroplants, with 30.79% and 27.97% at 15 kPa, respectively, and the Rodeo variety recorded a reduction of 35.97%. From 5 kPa, the varieties record reductions in the number of secondary roots of more than 15%. The effect of osmotic pressures on decreasing the taproot height and length is not significant. The Xewel variety had the highest average fresh (0.483 g) and dry (0.082 g) weights of the aerial part at 15 kPa and the Rodeo variety had the lowest ones (0.308 g and 0.0501 g). The Lady Nema variety had the highest average fresh (0.171 g) and dry (0.039 g) root weights and the Rodeo variety had the lowest ones (0.086 and 0.020 g). The vitroplants of Rodeo variety recorded the highest decreases in total chlorophyll contents at all osmotic pressures and the lowest increase in proline content (53.37%) at 15 kPa. A contrario, the Xewel variety recorded the greatest increase in proline content (116.26%). Ultimately, the vitroplants of Lady Nema and Xewel varieties were more tolerant to water stress, the Ganila and Mongal varieties were moderately tolerant and the Rodeo variety was the most sensitive.

Effects of Anthropogenic Disturbance on Sediment Organic Carbon Mineralization Under Different Water Conditions in Coastal Wetland of a Subtropical Estuary

The changes in soil organic carbon(C) mineralization as affected by anthropogenic disturbance directly determine the role of soils as C source or sink in the global C budget. The objectives of this study were to investigate the effects of anthropogenic disturbance(aquaculture pond, pollutant discharge and agricultural activity) on soil organic C mineralization under different water conditions in the Minjiang River estuary wetland, Southeast China. The results showed that the organic C mineralization in the wetland soils was significantly affected by human disturbance and water conditions(P < 0.001), and the interaction between human disturbance activities and water conditions was also significant(P < 0.01). The C mineralization rate and the cumulative mineralized carbon dioxide-carbon(CO_2-C)(at the 49th day) ranked from highest to lowest as follows: Phragmites australis wetland soil > aquaculture pond sediment > soil near the discharge outlet > rice paddy soil. This indicated that human disturbance inhibited the mineralization of C in soils of the Minjiang River estuary wetland, and the inhibition increased with the intensity of human disturbance. The data for cumulative mineralized CO_2-C showed a good fit(R^2 > 0.91) to the first-order kinetic model C_t = C_0(1 – exp(–kt)). The kinetic parameters C_0, k and C_0 k were significantly affected by human disturbance and water conditions. In addition, the total amount of mineralized C(in 49 d) was positively related to C_0, C_0 k and electrical conductivity of soils. These findings indicated that anthropogenic disturbance suppressed the organic C mineralization potential in subtropical coastal wetland soils, and changes of water pattern as affected by human activities in the future would have a strong influence on C cycling in the subtropical estuarine wetlands.

Model Tests Research on A Float-Over Barge in Shallow Water Under the Undocking Conditions

In this study,the Jinzhou 9-3 CEPD float-over installation project was investigated.During the undocking condition,the water depth of the motion path of the working barge gradually changed from 10.31 m to 9.41 m.The undocking clearance of the HYSY 228 is smaller than 1 m;therefore,the barge shows highly nonlinear hydrodynamic characteristics,and it is difficult to be accurately simulated by numerical analysis.Thus,it is necessary to obtain the hydrodynamic characteristics and laws of the float-over barge at different water depths by using tank model test,to provide some reference and guidance for float-over operations in shallow water.

Spatial variability of leaf wetness under different soil water conditions in rainfed jujube (Ziziphus jujuba Mill.) in the loess hilly region, China

Leaf wetness provides a wide range of benefits not only to leaves,but also to ecosystems and communities.It regulates canopy eco-hydrological processes and drives spatial differences in hydrological flux.In spite of these functions,little remains known about the spatial distribution of leaf wetness under different soil water conditions.Leaf wetness measurements at the top(180 cm),middle(135 cm),and bottom(85 cm)of the canopy positions of rainfed jujube(Ziziphus jujuba Mill.)in the Chinese loess hilly region were obtained along with meteorological and soil water conditions during the growing seasons in 2019 and 2020.Under soil water non-deficit condition,the frequency of occurrence of leaf wetness was 5.45%higher at the top than at the middle and bottom of the canopy positions.The frequency of occurrence of leaf wetness at the top,middle and bottom of the canopy positions was over 80%at 17:00‒18:00(LST).However,the occurrence of leaf wetness at the top was earlier than those at the middle and bottom of the canopy positions.Correspondingly,leaf drying at the top was also latter than those at the middle and bottom of the canopy positions.Leaf wetness duration at the middle was similar to that at the bottom of the canopy position,but about 1.46-3.01 h less than that at the top.Under soil water deficit condition,the frequency of occurrence of leaf wetness(4.92%-45.45%)followed the order of top>middle>bottom of the canopy position.As the onset of leaf wetness was delayed,the onset of wet leaf drying was advanced and the leaf wetness duration was shortened.Leaf wetness duration at the top was linearly related(R^(2)>0.70)to those at the middle and bottom of the canopy positions under different soil water conditions.In conclusion,the hydrological processes at canopy surfaces of rainfed jujube depended on the position of leaves,thus adjusting canopy structure to redistribute hydrological process is a way to meet the water need of jujube.

Influence of Water Boundary Conditions on Pore Pressure and Improvement Effect in Electroosmosis

The influence of water boundary conditions on pore pressure was studied by one-dimensional electroosmotic consolidation test, and the effects of electroosmosis, pore water pressure,settlement and electroosmotic flow were monitored and analyzed.The results show that the boundary conditions of electroosmotic water have a significant effect on the pore water pressure and improving effect. Negative pore water pressure without auxiliary water is far greater than the replenishment. The measured data show that improvements in experiments without replenishment are also better. The calculation of Esrig solution of the pore water pressure is consistent with the measurement data in the watersupplementing test and is very different from the measurement data in the test without rehydration. Considering the impact of water boundary conditions is the key to electroosmosis experiments and applications.

Observational characteristics and dynamic mechanism of low-salinity water lens for the offshore detachment of the Changjiang River diluted water in August 2006

The Changjiang River diluted water(CDW)spreads into the East China Sea(ECS)primarily in a plume pattern,although in some years,low-salinity water lenses(LSWLs)detach from the main body of the CDW.In-situ observations indicate that in August 2006,a LSWL detached from the main body of the CDW near the river mouth.In this paper,the effects of winds,tides,baroclinity and upwelling on LSWLs are explored with a threedimensional model.The results show that:(1)winds play a crucial role in these detachment events because windinduced northerly Eulerian residual currents impose an uneven force on the CDW and cut it off,thus forming a LSWL;(2)upwelling carries high-salinity water from the lower layer to the upper layer,truncating the low-salinity water tongue vertically,which is conducive to the detachment and maintenance of LSWLs;and(3)upwelling during the evolution of a LSWL is caused by the combined effects of winds and tides.The influences of windinduced upwelling are mainly near the shore,whereas the upwelling along the 30 m isobath is predominantly affected by tides,with the effect increasing from neap tide to spring tide.

Proof of Six-Wave Resonance Conditions of Ocean Surface Gravity Waves in Deep Water

A necessary big step up in the modern water wave theories and their widespread application in ocean engineering is how to obtain 6-wave resonance conditions and to prove it. In the light of the existing forms and characteristics of 3-wave, 4-wave and 5-wave resonance conditions, the 6-wave resonance conditions are proposed and proved for currently a maximum wave-wave resonance interactions of the ocean surface gravity waves in deep water, which will be indispensable to both the Kolmogorov spectrum of the corresponding universal wave turbulence and a synthetic 4-5-6-wave resonant model for the ocean surface gravity waves.