A series of photosensitive random copolymers （UPDHES） were prepared by introducing acrylate groups onto the side chain of the copolymer backbone of N, N-domethyl amimethyl methacrylate （DMAEMA）, 2-hydroxypropyl ac...A series of photosensitive random copolymers （UPDHES） were prepared by introducing acrylate groups onto the side chain of the copolymer backbone of N, N-domethyl amimethyl methacrylate （DMAEMA）, 2-hydroxypropyl acrylate （HEA）, 2-ethylhexyl acrylate （EHA）, and styrene （St） （PDHES）. The molecular structure of UPDHES was characterized by FTIR, 1HNMR and GPC. The photopolymerization kinetics of UPDHES with different C=C content was investigated using real time FTIR in which it was found that the UPDHES system had notable photosensitivity. The effect of C=C content on the properties of cured films were studied by evaluating various film properties such as thermal stability, glass transition temperature and tensile properties. The thermal degradation of cured films was investigated via thermogravimetric analysis/infrared spectrometry （TGA-IR）. Thus a series of UV-curable electrodeposition coatings with good photosensitivity and mechanical properties were prepared from a low-cost photosensitive random copolymer.展开更多
Two kinds of water-soluble and ultraviolet (UV) curable oligomers were synthesized and characterized. The oligomers were evaluated as resins for water-based UV curable coating. The rheology of the two oligomers' a...Two kinds of water-soluble and ultraviolet (UV) curable oligomers were synthesized and characterized. The oligomers were evaluated as resins for water-based UV curable coating. The rheology of the two oligomers' aqueous so-lutions was investigated in terms of solid fraction, pH dependence, and temperature dependence. The solutions were found to be Newtonian fluid showing rather low viscosity even at high solid fraction of 0.55. The drying process of the coatings and the properties of the cured coatings were studied by comparing them with water-dispersed UV-curable polyurethane methyl acrylate. It was evident that the water-soluble coating dried more slowly; and that the overall properties were inferior to those of the water-dispersed coating.展开更多
The oxidation and lower temperature hot corrosion (LTHC) processes occurring on the surface of Ni-Cr coatings pro-duced by high velocity arc spray (HVAS) were studied. Several different conditions were studied under s...The oxidation and lower temperature hot corrosion (LTHC) processes occurring on the surface of Ni-Cr coatings pro-duced by high velocity arc spray (HVAS) were studied. Several different conditions were studied under simulated boiler conditions at 650 ℃. The protection effect of an Al coating deposited by HVAS onto the Ni-Cr coating was also investigated. Microscope, X-ray diffraction and corrosion rate curves have been used to analyze corrosion mechanisms. The experimental results show that: 1) The oxidation rates are almost superposed in both air (no SO3) and in simulated coal-fired gas (containing SO3) as long as no salt was present on the surface. These rate curves show a logarithmic relationship. 2) When the surface is coated with salt (75%K2SO3 + 25%Na2SO3) the rate curve for LTHC of the Ni-Cr coated surface shows a parabolic shape in the simulated coal-fire flue gas. In air only the oxidation reaction takes place, the second type of LTHC was not seen. And 3) the Al over coating on the Ni-Cr enhances resistance to LTHC because an inter-metallic compound, Al3Ni2, forms at the Al/Ni-Cr interface and because of the increase in coating thickness.展开更多
Three kinds of UV-curable self-emulsified polyurethane-acrylate (PUA) prepolymer, i.e., conventional, chain extended and grafted PUAs, were prepared. The relatively small particle size of the PUA dispersions indicates...Three kinds of UV-curable self-emulsified polyurethane-acrylate (PUA) prepolymer, i.e., conventional, chain extended and grafted PUAs, were prepared. The relatively small particle size of the PUA dispersions indicates that the PUA prepolymers exhibit sufficient aqueous dispersibility. The PUA prepolymers can substantially lower the interfacial tension of water. Chain-extended PUA dispersions exhibit pseudoplastic behavior and thixotropy to a greater extent than do their conventional counterpart. The chain-extended and grafted PUA photocure to higher conversion than do the conventional PU equivalent. The results of DSC measurement suggest that there exists phase mixing between the hard and the soft segment phases for the PUAs based on PEG 400 that is the comparatively short soft segment in the prepolymer. For the PUA prepolymers based on PEG having higher M-n values, chain-extending and grafting could impede the phase separation between the hard and the soft segment domains. The adhesion, impact strength and flexibility of the photocured films were tested.展开更多
非固化橡胶沥青防水涂料高温性能较低,无法应用于立面、坡屋面等位置,且130℃时黏度高,需加热到160℃以上才可进行施工,消耗大量能源和废气的排放。开发了特种非固化橡胶沥青防水涂料的配方。并分析SBS、SBR、橡胶粉、沥青和软化油、无...非固化橡胶沥青防水涂料高温性能较低,无法应用于立面、坡屋面等位置,且130℃时黏度高,需加热到160℃以上才可进行施工,消耗大量能源和废气的排放。开发了特种非固化橡胶沥青防水涂料的配方。并分析SBS、SBR、橡胶粉、沥青和软化油、无机填料、分散助剂和C5石油树脂等原材料对其性能的影响。结果表明:特种非固化橡胶沥青防水涂料相对普通非固化橡胶沥青防水涂料软化点提高35℃,耐热性提高30℃,130℃黏度降低1810 m Pa·s,90℃时与防水卷材不发生滑移,具有高耐热性、低黏度的特点,可用于立面、坡屋面防水,可在130℃施工,降低能源消耗。展开更多
This article investigates the low-temperature formation of aluminide coatings on a Ni-base superalloy by pack cementation process. The pack cemented coatings characteristic of high density and homogeneity possess a tw...This article investigates the low-temperature formation of aluminide coatings on a Ni-base superalloy by pack cementation process. The pack cemented coatings characteristic of high density and homogeneity possess a two-layer structure. The top layer mainly consists of Al3Ni2 and Al3Ni,while the bottom layer of Al3Ni2. Great efforts are made to elucidate the effects of different experimental parameters on the microstructure and the constituent distribution of the coatings. The results show that all the parameters exclusive of the pack activator （NH4Cl） content produce effect on the coating thickness,but do not on the microstructure and the constituent distribution. The pack activator （NH4Cl） content affects neither the coating thickness nor structure and constituent distribution. The parabolic relationship between the coating thickness and the deposition time suggests that the process is diffusion-controlled. Furthermore,the article demonstrates a linear relationship between the coating thickness and the re-ciprocal deposition temperature.展开更多
基金Funded by the National Natural Science Foundation of China (50673038 and 20704017)the Innovation Foundation of Jiangsu(BY2011118)
文摘A series of photosensitive random copolymers （UPDHES） were prepared by introducing acrylate groups onto the side chain of the copolymer backbone of N, N-domethyl amimethyl methacrylate （DMAEMA）, 2-hydroxypropyl acrylate （HEA）, 2-ethylhexyl acrylate （EHA）, and styrene （St） （PDHES）. The molecular structure of UPDHES was characterized by FTIR, 1HNMR and GPC. The photopolymerization kinetics of UPDHES with different C=C content was investigated using real time FTIR in which it was found that the UPDHES system had notable photosensitivity. The effect of C=C content on the properties of cured films were studied by evaluating various film properties such as thermal stability, glass transition temperature and tensile properties. The thermal degradation of cured films was investigated via thermogravimetric analysis/infrared spectrometry （TGA-IR）. Thus a series of UV-curable electrodeposition coatings with good photosensitivity and mechanical properties were prepared from a low-cost photosensitive random copolymer.
文摘Two kinds of water-soluble and ultraviolet (UV) curable oligomers were synthesized and characterized. The oligomers were evaluated as resins for water-based UV curable coating. The rheology of the two oligomers' aqueous so-lutions was investigated in terms of solid fraction, pH dependence, and temperature dependence. The solutions were found to be Newtonian fluid showing rather low viscosity even at high solid fraction of 0.55. The drying process of the coatings and the properties of the cured coatings were studied by comparing them with water-dispersed UV-curable polyurethane methyl acrylate. It was evident that the water-soluble coating dried more slowly; and that the overall properties were inferior to those of the water-dispersed coating.
文摘The oxidation and lower temperature hot corrosion (LTHC) processes occurring on the surface of Ni-Cr coatings pro-duced by high velocity arc spray (HVAS) were studied. Several different conditions were studied under simulated boiler conditions at 650 ℃. The protection effect of an Al coating deposited by HVAS onto the Ni-Cr coating was also investigated. Microscope, X-ray diffraction and corrosion rate curves have been used to analyze corrosion mechanisms. The experimental results show that: 1) The oxidation rates are almost superposed in both air (no SO3) and in simulated coal-fired gas (containing SO3) as long as no salt was present on the surface. These rate curves show a logarithmic relationship. 2) When the surface is coated with salt (75%K2SO3 + 25%Na2SO3) the rate curve for LTHC of the Ni-Cr coated surface shows a parabolic shape in the simulated coal-fire flue gas. In air only the oxidation reaction takes place, the second type of LTHC was not seen. And 3) the Al over coating on the Ni-Cr enhances resistance to LTHC because an inter-metallic compound, Al3Ni2, forms at the Al/Ni-Cr interface and because of the increase in coating thickness.
基金Project supported by Guangdong Natural Science Foundation(No. 960019)
文摘Three kinds of UV-curable self-emulsified polyurethane-acrylate (PUA) prepolymer, i.e., conventional, chain extended and grafted PUAs, were prepared. The relatively small particle size of the PUA dispersions indicates that the PUA prepolymers exhibit sufficient aqueous dispersibility. The PUA prepolymers can substantially lower the interfacial tension of water. Chain-extended PUA dispersions exhibit pseudoplastic behavior and thixotropy to a greater extent than do their conventional counterpart. The chain-extended and grafted PUA photocure to higher conversion than do the conventional PU equivalent. The results of DSC measurement suggest that there exists phase mixing between the hard and the soft segment phases for the PUAs based on PEG 400 that is the comparatively short soft segment in the prepolymer. For the PUA prepolymers based on PEG having higher M-n values, chain-extending and grafting could impede the phase separation between the hard and the soft segment domains. The adhesion, impact strength and flexibility of the photocured films were tested.
文摘非固化橡胶沥青防水涂料高温性能较低,无法应用于立面、坡屋面等位置,且130℃时黏度高,需加热到160℃以上才可进行施工,消耗大量能源和废气的排放。开发了特种非固化橡胶沥青防水涂料的配方。并分析SBS、SBR、橡胶粉、沥青和软化油、无机填料、分散助剂和C5石油树脂等原材料对其性能的影响。结果表明:特种非固化橡胶沥青防水涂料相对普通非固化橡胶沥青防水涂料软化点提高35℃,耐热性提高30℃,130℃黏度降低1810 m Pa·s,90℃时与防水卷材不发生滑移,具有高耐热性、低黏度的特点,可用于立面、坡屋面防水,可在130℃施工,降低能源消耗。
文摘This article investigates the low-temperature formation of aluminide coatings on a Ni-base superalloy by pack cementation process. The pack cemented coatings characteristic of high density and homogeneity possess a two-layer structure. The top layer mainly consists of Al3Ni2 and Al3Ni,while the bottom layer of Al3Ni2. Great efforts are made to elucidate the effects of different experimental parameters on the microstructure and the constituent distribution of the coatings. The results show that all the parameters exclusive of the pack activator （NH4Cl） content produce effect on the coating thickness,but do not on the microstructure and the constituent distribution. The pack activator （NH4Cl） content affects neither the coating thickness nor structure and constituent distribution. The parabolic relationship between the coating thickness and the deposition time suggests that the process is diffusion-controlled. Furthermore,the article demonstrates a linear relationship between the coating thickness and the re-ciprocal deposition temperature.
