Low-Temperature Selective Catalytic Reduction of NO with NH_3 over Fe–Ce–O_x Catalysts

In this study, we used a simple impregnation method to prepare Fe-Ce-O x catalysts and tested them regarding their low-temperature (200-300 °C) selective catalytic reduction (SCR) of NO using NH3. We investigated the effects of Fe/Ce molar ratio, the gas hourly space velocity (GHSV), the stability and SO2/H2O resistance of the catalysts. The results showed that the FeCe(1:6)O x (Ce/Fe molar ratio is 1:6) catalyst, which has some ordered parallel channels, exhibited good SCR performance. The FeCe(1:6)O x catalyst had the highest NO conversion with an activity of 94-99% at temperatures between 200 and 300 °C at a space velocity of 28,800 h−1. The NO conversion for the FeCe(1:6)O x catalyst also reached 80-98% between 200 and 300 °C at a space velocity of 204,000 h−1. In addition, the FeCe(1:6)O x catalyst demonstrated good stability in a 10-h SCR reaction at 200-300 °C. Even in the presence of SO2 and H2O, the FeCe(1:6)O x catalyst exhibited good SCR performance.

Utilization and recycling of low-temperature waste heat of stainless steel continuous annealing furnace

Stainless steel continuous annealing furnace is mainly used for heat treatment of hot-rolled strip steel.The combustion air will be enabled to heat to 520℃by waste heat recovery system,but the discharge temperature is still up to about 300℃.Owing to with development of global emphasis on energy conservation energy saving and discharge reduction,it's significant to lower the discharge temperature to below 200℃, for the sake of achieving rational use of waste heat resource.Through the analysis of the existing heat recovery system by this study,it is proved that mixing low temperature with flue gas in high temperature standard will increase the capacity of the flue gas and deteriorate the quality of remaining heat resource.In stead of that,increasing the combustion air temperature to 600℃on the basis of stability temperature for the prerequisite of recuperator design,and giving priority to reducing fuel consumption are the better way.The recovery and recycle of low temperature gas are also be introduced.It is demonstrated by the way of setting a secondary recuperator at the exit of the primary recuperator,and using low temperature flue gas to heat the air used for drying the strip steel,the exhuast temperature of flue gas can be reduced to lower than 200℃.At the same time,the steam required for heating air is saved,the energy reserve as high as 2 300 t of standard coal per year.

Research on Heredity of Coarse Ferrite Grains

The changes in austenite grain size of the specimens with coarse ferrite grains under different heat treatment process were investigated.The focus was on studying the effect of annealing on refining coarse ferrite grains,as well as the influence of the ferrite grain size on the main technical indicators of gas carburizing.The results show that coarse ferrite grains may not necessarily cause the coarse austenite grains,but may result in mixed austenite grains.After annealing treatment,the coarse ferrite grains can be significantly refined and homogenized.Moreover,the coarse ferrite grains have no significant effects on hardnessand intergranular oxidationof gas carburizing.

Porosity of gas shale:Is the NMR-based measurement reliable?

Aiming at obtaining an accurate porosity of gas shale,various approaches are attempted.Therein,nuclear magnetic resonance(NMR),being treated as a kind of new-developed technique,possesses the representative significance.However,as a booming technique,the reliability of NMR-based porosity of shale is not exactly defined.Depending on NMR device,this work measured the porosity of shale experiencing different water soaking time,accordingly,judging the reliability of NMR-based porosity.Results indicate the NMR outcomes vary with the water soaking time,making a doubt about the objectivity of NMRbased porosity in reflecting the real shale porosity.Furthermore,some supplementary means were adopted to verify the water soaking-induced variation in the pore system of shale sample,which intensities the suspicion if the NMR-based porosity is reliable or not.To sum up,this work considers that the NMR-based porosity of shale is not reliable enough when water is used as the probe.Besides,this work also offers some suggestions on how to enhance the reliability of NMR-based porosity of shale sample.Basically,this work selects a fresh perspective to analyze the NMR approach in determining shale porosity,which is hopefully helpful in promoting the development of NMR technique in the shale-related field.

Oxygen-coordinated low-nucleus cluster catalysts for enhanced electrocatalytic water oxidation

The oxygen evolution reaction(OER)activity of single-atom catalysts(SACs)is closely related to the coordination environment of the active site.Oxygencoordinated atomic metal species bring about unique features beyond nitrogen-coordinated atomic metal species due to the fact that the M-O bond is weaker than the M-N bond.Herein,a series of metal-oxygen-carbon structured low-nucleus clusters(LNCs)are successfully anchored on the surface of multiwalled carbon nanotubes(M-MWCNTs,M=Ni,Co,or Fe)through a foolproof low-temperature gas transfer(300℃)method without any further treatment.The morphology and coordination configuration of the LNCs at the atomic level were confirmed by comprehensive characterizations.The synthetic Ni-MWCNTs electrocatalyst features excellent OER activity and stability under alkaline conditions,transcending the performances of Co-MWCNTs,Fe-MWCNTs and RuO_(2).Density functional theory calculations reveal that the moderate oxidation of low-nucleus Ni clusters changes the unoccupied orbital of Ni atoms,thereby lowering the energy barrier of the OER rate-limiting step and making the OER process more energy-efficient.This study demonstrates a novel versatile platform for large-scale manufacturing of oxygen-coordinated LNC catalysts.

Low-temperature oxidation behavior and mechanism of semi-dry desulfurization ash from iron ore sintering flue gas

The low-temperature wet oxidation behavior of semi-dry desulfurization ash from iron ore sintering flue gas in ammonium citrate solution was investigated for efficiently utilizing the low-quality desulfurization ash. The effects of the ammonium citrate concentration, oxidation temperature, solid/liquid ratio, and oxidation time on the wet oxidation behavior of desulfurization ash were studied. Simultaneously, the oxidation mechanism of desulfurization ash was revealed by means of X-ray diffraction, Zeta electric resistance, and X-ray photoelectron spectroscopy (XPS) analysis. Under the optimal conditions with ammonium citrate, the oxidation ratio of CaSO_(3) was up to the maximum value (98.49%), while that of CaSO_(3) was only 8.92% without ammonium citrate. Zeta electric resistance and XPS results indicate that the dissolution process of CaSO_(3) could be significantly promoted by complexation derived from the ammonium citrate hydrolysis. As a result, the oxidation process of CaSO_(3) was transformed from particle oxidation to SO_(3)^(2−) ion oxidation, realizing the rapid transformation of desulfurization ash from CaSO_(3) to CaSO_(4) at low temperature. It provides a reference for the application of semi-dry desulfurization ash and contributes to sustainable management for semi-dry desulfurization ash.

Effect of Agents on Hydrate Formation and Low-Temperature Rheology of Polyalcohol Drilling Fluid

In order to ensure safe drilling in deep water and marine gas hydrate bearing sediments, the needed characteristics of drilling fluid system were analyzed. Moreover, the effect of different agents on hydrate formation and the low-temperature rheology of designed polyalcohol drilling fluid were tested, respectively. The results show that clay can promote gas hydrate growth, while modified starch and polyalcohol can inhibit hydrate formation to some extent, and PVP K90 has a good performance on hydrate inhibition. The influence of clay on low-temperature rheology of polyglycols drilling fluid is notable. Therefore, the clay-free polyalcohol drilling fluid is suitable for deep water and marine gas hydrate drilling under optimal conditions.

Low temperature H_2S sensor based on copper oxide/tin dioxide thick film

Nanostructured tin dioxide （SnO2） powders were prepared by a sol-gel dialytic process and and the doping of CuO on it was completed by a deposition-precipitation method.The thick film sensors were fabricated from the CuO/SnO2 polycrystalline powders.Sensing behavior of the sensor was investigated with various gases including CO,H2,NH3,hexane,acetone,ethanol,methanol and H2S in air.The as-synthesized gas sensor had much better response to H2S than to other gases.At the same time,the CuO/SnO2 sensor had enough sensitivity,together with fast response and recovery,to distinguish H2S from those gases at 160 and 210 ℃.Therefore,it might have promising applications in the future.

Accumulation conditions and key technologies for exploration and development in Sebei gas field in Qaidam Basin,NW China

The Sebei gas field,located in the northern slope of the Sanhu depression in the eastern Qaidam Basin,is the largest inland biogas producing area in China.It is a typical Quaternary biogenetic gas reservoir composed of multiple layers of unconsolidated sandstone.Through systematic study of gas generating mechanism of source rock,reservoir-caprock combination and trap evolution,the unique biogas accumulation model characterized by“continuous hydrocarbon generation and dynamic accumulation”is established.Its uniqueness is reflected in the biogas generation mechanism under dual effect of lowtemperature thermodynamics and microbial degradation,source-reservoir one body,self generation and self storage,dynamic source-reservoir-caprock assemblages and anticline trap formation mechanism of multi-factor mutual promotion.This understanding reveals the intrinsic factors for formation of largescale biogas field under frigid climate,high salinity and low organic matter abundance.A number of exploration and development technologies have been worked out during the exploration and development of the Sebei gas field.Among them,the low-amplitude structure identification technique,multiparameter gas-bearing detection technique,sand control and comprehensive water control technique for unconsolidated sandstone are well applied in discovering the gas field,increasing reserve,and increasing and maintaining gas production.The above understandings and key technologies have great reference significance and demonstration effect for biogas exploration and development in China and the world.

Gradient Elastic–Plastic Properties of Expanded Austenite Layer in 316L Stainless Steel

The gradient mechanical properties, variation of stress with strain and surface cracking behavior of expanded austenite developed on 316L austenitic stainless steel were investigated by nanoindentation tests, X-ray residual stress analysis and scanning electron microscope observation in four-point bending tests. The results show that the plastic properties of the carburizing layer including true initial yield strengths and strain hardening exponents increase significantly from substrate to surface, while the true elastic modulus just improves slightly. Due to the onset of plastic flow, the residual stresses are almost equivalent to the true initial yield strengths from surface to the depth of ～10 lm. The results of four-point bending tests show that surface stress increases linearly with the increase in strain until the strain reaches～1.0%, after that the plastic yield happens. The expanded austenite surface layer is brittle, and the cracks will be created at the strain of ～1.4%.The cracking stress is about～2.4 GPa.