Using the EMD Method to Determine Fault Criterion for Medium-low Pressure Gas Regulators

By extracting the outlet pressure data of gas regulators,this paper uses the EMD toolbox of the MATLAB software,which can perform data decomposition and the Hilbert-Huang Transform to find the rules with fault data.Eventually,the medium-low pressure gas regulator fault criterion can be established.

Research on Online Safety Precaution Technology of a High-medium Pressure Gas Regulator

In view of some of the characteristics of a high-medium pressure gas regulator, such as small fault samples, many fault types and complex fault features etc, in order to improve the accuracy of fault precaution in this paper, a fault diagnosis method based on the combination of the improved wavelet packet and pressure harmonic distortion rate is proposed. On the basis of the harmonic distortion rate of the outlet pressure and the energy value of each frequency band obtained by improved wavelet packet decomposition, the rules for fault data were summarized. Finally, a safety precaution model of the high-medium pressure gas regulator is established.

Numerical Simulation of Oil and Gas Two-Phase Flow in Deep Condensate Gas Reservoirs in Bohai Buried Hills

The BZ19-6 gas field is characterized by high temperature and high pressure (HTHP), high condensate content, little difference between the formation pressure and dew point pressure, and large amount of reverse condensate liquid. During the early stage of depletion development, the production gas-oil ratio (GOR) and production capacity remain relatively stable, which is inconsistent with the conventional reverse condensate seepage law. In view of the static and dynamic conflict in development and production, indoor high-temperature and high-pressure PVT experiment was carried out to reveal the mist-like condensation phenomenon of fluids in the BZ19-6 formation. And the seepage characteristics of condensate gas reservoirs with various degrees of depletion under the condition of HTHP were analyzed based on production performance. The change rule of fluid phase state was analyzed in response to the characterization difficulties of the seepage mechanism. The fluid state was described using the miscible mechanism. And the interphase permeability interpolation coefficient was introduced based on interfacial tension. By doing so, the accurate characterization of the “single-phase flow of condensate gas-near-miscible mist-like quasi single-phase flow-oil-gas two-phase flow” during the development process was achieved. Then the accurate fitting of key indicators for oilfield development was completed, and the distribution law of formation pressure and the law of condensate oil precipitation under different reservoir conditions are obtained. Based on research results, the regulation strategy of variable flow rate production was developed. Currently, the work system has been optimized for 11 wells, achieving a “zero increase” in the GOS of the gas field and an annual oil increase of 22,000 cubic meters.

Dynamic modeling and simulation of a pressurized system used in flight vehicle

For a typical pressurized system with a novel dual-stage gas pressure reducing regulator,a system model is established with modular models of various typical components. The simulation study on the whole working period shows that the general trends and magnitudes of simulation curves are in agreement with experimental measured curves. As the key component in the pressurized system, the regulator is studied by a series of numerical simulations to reveal the influences of various structure parameters on its stability. Furthermore, the variable ranges which can guarantee the stability of regulator and system are obtained to provide guidance for design. The modeling and analysis approach can be applied to other systems and components.