Actuation Spaces Synthesis of Lower-Mobility Parallel Mechanisms Based on Screw Theory

The lower-mobility parallel mechanism has been widely used in the engineering field due to its numerous excellent characteristics.However,little work has been devoted to the actuator selection and placement that best satisfy the system's functional requirements during concept design.In this study,a unified approach for synthesizing the actuation spaces of both rigid and flexure parallel mechanisms has been presented,and all possible combinations of inputs could be obtained,laying a theoretical foundation for the subsequent optimization of inputs.According to the linear independence of actuation space and constraint space of the lower-mobility parallel mechanism,a general expression of actuation spaces in the format of screw systems is deduced,a unified synthesis process for the lower-mobility parallel mechanism is derived,and the efficiency of the method is validated with two selective examples based on screw theory.This study presents a theoretical framework for the input selection problems of parallel mechanisms,aiming to help designers select and place actuators in a correct and even optimal way after the configuration design.

Evaluation on Configuration Stiffness of Overconstrained 2R1T Parallel Mechanisms

Currently,two rotations and one translation(2R1T)three-degree-of-freedom(DOF)parallel mechanisms(PMs)are widely applied in five-DOF hybrid machining robots.However,there is a lack of an effective method to evaluate the configuration stiffness of mechanisms during the mechanism design stage.It is a challenge to select appropriate 2R1T PMs with excellent stiffness performance during the design stage.Considering the operational status of 2R1T PMs,the bending and torsional stiffness are considered as indices to evaluate PMs'configuration stiffness.Subsequently,a specific method is proposed to calculate these stiffness indices.Initially,the various types of structural and driving stiffness for each branch are assessed and their specific values defined.Subsequently,a rigid-flexible coupled force model for the over-constrained 2R1T PM is established,and the proposed evaluation method is used to analyze the configuration stiffness of the five 2R1T PMs in the entire workspace.Finally,the driving force and constraint force of each branch in the whole working space are calculated to further elucidate the stiffness evaluating results by using the proposed method above.The obtained results demonstrate that the bending and torsional stiffness of the 2RPU/UPR/RPR mechanism along the x and y-directions are larger than the other four mechanisms.

Configuration and Kinematics of a 3-DOF Generalized Spherical Parallel Mechanism for Ankle Rehabilitation

The kinematic equivalent model of an existing ankle-rehabilitation robot is inconsistent with the anatomical structure of the human ankle,which influences the rehabilitation effect.Therefore,this study equates the human ankle to the UR model and proposes a novel three degrees of freedom(3-DOF)generalized spherical parallel mechanism for ankle rehabilitation.The parallel mechanism has two spherical centers corresponding to the rotation centers of tibiotalar and subtalar joints.Using screw theory,the mobility of the parallel mechanism,which meets the requirements of the human ankle,is analyzed.The inverse kinematics are presented,and singularities are identified based on the Jacobian matrix.The workspaces of the parallel mechanism are obtained through the search method and compared with the motion range of the human ankle,which shows that the parallel mechanism can meet the motion demand of ankle rehabilitation.Additionally,based on the motion-force transmissibility,the performance atlases are plotted in the parameter optimal design space,and the optimum parameter is obtained according to the demands of practical applications.The results show that the parallel mechanism can meet the motion requirements of ankle rehabilitation and has excellent kinematic performance in its rehabilitation range,which provides a theoretical basis for the prototype design and experimental verification.

Type synthesis of a class of spatial lower-mobility parallel mechanisms with orthogonal arrangement based on Lie group enumeration

Type synthesis of lower-mobility parallel mechanisms (PMs) has drawn extensive interests, particularly two main approaches were established by using the reciprocal screw system theory and Lie group theory, respectively. Although every above approach provides a universal framework for structural design of general lower-mobility PMs, type synthesis is still a comparably difficult task for the PMs with particular geometry or required to fulfill some specified tasks. This paper aims at exploring a simple and effective synthesis method for lower-mobility parallel mechanisms with orthogonal arrangement (OPMs), and the applied mathematical tool is established in the displacement group theory. For this purpose, the concept of the Cartesian DOF-characteristic matrix, originated from canonical displacement subgroup and displacement submanifold, is proposed. A new approach based on combination of the atlas of Cartesian DOF-characteristic matrix and displacement group-theoretic method is addressed for both exhaustive classification and type synthesis of OPMs. Type synthesis for some representatives of 3-DOF OPMs verifies effectiveness of the proposed approach.

Displacement manifold method for type synthesis of lower-mobility parallel mechanisms

Type synthesis of lower-mobility parallel mechanisms is a hot and frontier topic in international academic and industrial field. Based on the Lie group theory, a displacement manifold synthesis method is proposed. For all the nine kinds of lower-mobility parallel mechanisms, the mechanism displacement manifold, limb displacement manifold and the geometrical conditions which guarantee that the intersection of the limb displacement manifold is the desired mechanism displacement manifold are enumerated. Various limb kinematic chains can be obtained using the product closure of displacement subgroup. Parallel mechanisms can be constructed with these limbs while obeying the geometrical conditions. Hence, all the nine kinds of lower-mobility parallel mechanisms can be synthesized using this method. Since displacement manifold deals with finite motion, the result mechanism of synthesis have full-cycle mobility. Novel architectures of lower-mobility parallel mechanisms can be obtained using this method.

Design and Analysis of a Novel Shoulder Exoskeleton Based on a Parallel Mechanism

Power-assisted upper-limb exoskeletons are primarily used to improve the handling efficiency and load capacity.However,kinematic mismatch between the kinematics and biological joints is a major problem in most existing exoskeletons,because it reduces the boosting effect and causes pain and long-term joint damage in humans.In this study,a shoulder augmentation exoskeleton was designed based on a parallel mechanism that solves the shoulder dislocation problem using the upper arm as a passive limb.Consequently,the human–machine synergy and wearability of the exoskeleton system were improved without increasing the volume and weight of the system.A parallel mechanism was used as the structural body of the shoulder joint exoskeleton,and its workspace,dexterity,and stiffness were analyzed.Additionally,an ergonomic model was developed using the principle of virtual work,and a case analysis was performed considering the lifting of heavy objects.The results show that the upper arm reduces the driving force requirement in coordinated motion,enhances the load capacity of the system,and achieves excellent assistance.

Bridge Crack Segmentation Method Based on Parallel Attention Mechanism and Multi-Scale Features Fusion

Regular inspection of bridge cracks is crucial to bridge maintenance and repair.The traditional manual crack detection methods are timeconsuming,dangerous and subjective.At the same time,for the existing mainstream vision-based automatic crack detection algorithms,it is challenging to detect fine cracks and balance the detection accuracy and speed.Therefore,this paper proposes a new bridge crack segmentationmethod based on parallel attention mechanism and multi-scale features fusion on top of the DeeplabV3+network framework.First,the improved lightweight MobileNetv2 network and dilated separable convolution are integrated into the original DeeplabV3+network to improve the original backbone network Xception and atrous spatial pyramid pooling(ASPP)module,respectively,dramatically reducing the number of parameters in the network and accelerates the training and prediction speed of the model.Moreover,we introduce the parallel attention mechanism into the encoding and decoding stages.The attention to the crack regions can be enhanced from the aspects of both channel and spatial parts and significantly suppress the interference of various noises.Finally,we further improve the detection performance of the model for fine cracks by introducing a multi-scale features fusion module.Our research results are validated on the self-made dataset.The experiments show that our method is more accurate than other methods.Its intersection of union(IoU)and F1-score(F1)are increased to 77.96%and 87.57%,respectively.In addition,the number of parameters is only 4.10M,which is much smaller than the original network;also,the frames per second(FPS)is increased to 15 frames/s.The results prove that the proposed method fits well the requirements of rapid and accurate detection of bridge cracks and is superior to other methods.

Comparative Analysis of Characteristics of the Coupled and Decoupled Parallel Mechanisms

The existence of coupling makes the parallel mechanism possess some special advantages over the serial mechanism, while it is just the coupling that brings about the parallel mechanism some limitations, such as complex workspace, high nonlinear relationship between input and output, difficulties in static and dynamic analysis, and the development of control system, which restricts its application fields. The decoupled parallel mechanism is currently one of the research focuses of the mechanism fields, while the study on the different characteristics between the deeoupled and coupled parallel mechanisms has not been reported. Therefore, this paper performs the systematic comparative analysis of the 3-RPUR and the 3-CPR parallel mechanisms. The features of the two mechanisms are described and their movement forms are analyzed with screw theory. The inverse and forward displacement solutions are solved and the Jacobian matrices are obtained. According to the Jacobian matrices and by using the theory of physical model of the solution space, the workspace, dexterity, velocity, payload capability, and stiffness of the mechanisms are analyzed with plotting the indices atlases. The research results prove that the effects of the coupling on the parallel mechanism are double-side, and then the adoption of the decoupled parallel mechanism should be determined by the requirements of the concrete application situation. The contents of this paper should be useful for the type synthesis and practical application of the parallel mechanism.

Type Synthesis of 4-DOF Parallel Kinematic Mechanisms Based on Grassmann Line Geometry and Atlas Method

Many methods are proposed to deal with the type synthesis of parallel kinematic mechanisms（PKMs）, but most of them are less intuitive to some extent. Thus, to propose a concise and intuitive type synthesis method for engineering application is a very challenging issue, which should be further studied in the field. Grassmann line geometry, which can investigate the dimensions of spatial line-clusters in a concise way, is taken as the mathematic foundation. Atlas method is introduced to visually describe the degrees of freedom（DOFs） and constraints of a mechanism, and the dual rule is brought in to realize the mutual conversion of the freedom-space and constraint-space. Consequently, a systematic method based on Grassmann line geometry and Atlas method is generated and the entire type synthesis process is presented. Three type 4-DOF PKMs, i.e., 1T3R, 2T2R and 3T1R（T： translational DOF; R： rotational DOF）, are classified according to the different combinations of the translational DOFs and rotational DOFs. The type synthesis of 4-DOF PKMs is carried out and the possible configurations are thoroughly investigated. Some new PKMs with useful functions are generated during this procedure. The type synthesis method based on Grassmann line geometry and Atlas method is intuitive and concise, and can reduce the complexity of the PKMs＇ type synthesis. Moreover, this method can provide theoretical guidance for other PKMs＇ type synthesis and engineering application. A novel type synthesis method is proposed, which solves the existing methods＇ problems in terms of complicated, not intuitive and unsuitable for practical application.

Type Synthesis of 1T2R Parallel Mechanisms Using Structure Coupling-Reducing Method

Direct kinematics with analytic solutions is critical to the real-time control of parallel mechanisms.Therefore,the type synthesis of a mechanism having explicit form of forward kinematics has become a topic of interest.Based on this purpose,this paper deals with the type synthesis of 1T2R parallel mechanisms by investigating the topological structure coupling-reducing of the 3UPS&UP parallel mechanism.With the aid of the theory of mechanism topology,the analysis of the topological characteristics of the 3UPS&UP parallel mechanism is presented,which shows that there are highly coupled motions and constraints amongst the limbs of the mechanism.Three methods for structure coupling-reducing of the 3UPS&UP parallel mechanism are proposed,resulting in eight new types of 1T2R parallel mechanisms with one or zero coupling degree.One obtained parallel mechanism is taken as an example to demonstrate that a mechanism with zero coupling degree has an explicit form for forward kinematics.The process of type synthesis is in the order of permutation and combination;therefore,there are no omissions.This method is also appli cable to other configurations,and novel topological structures having simple forward kinematics can be obtained from an original mechanism via this method.

Type Synthesis and Characteristic Analysis of a Family of 2-DOF Rotational Decoupled Parallel Mechanisms

It is widely used for the rotational parallel mechanism in the field of spatial orientation. While owing to the existence of coupling, the forward kinematic solution and the control of the general rotational parallel mechanism are especially difficult. If decoupling can be realized, the kinematic analysis of the mechanism will be very simple. Presently, the research of the parallel mechanism is focused on the inverse solution and structure optimization, and there is a lack of rotation decoupled parallel mechanisms （DPMs）. So this paper proposes a family of 2 degree of freedom （DOF） rotational DPMs based on the four-bar linkage mechanism, and performs a characteristic analysis. This family of DPMs is composed of a moving platform, a fixed base and three limbs. Taking U_RRU SPU DPM as an example, the motion feature of this DPM is analyzed with the constraint screw method, and its mobility is calculated by using the Modified Kutzbach-Grtibler criterion. The inverse and forward displacement problems of the proposed parallel mechanism are solved. The decoupled feature of the proposed parallel mechanism is validated by the deduction of the expression of the Jaeobian matrix. Three kinds of singularity conditions of this DPM are discussed, and the atlases of the output parameter concerning different geometric parameters are plotted with the theory of the physical model of the solution space. The proposition and characteristic analysis of the novel rotational DPMs in this paper should be useful for further research and application of the parallel mechanisms.

Novel Mobility Formula for Parallel Mechanisms Expressed with Mobility of General Link Group

The determination of virtual constraints is always one of the key and difficult problems in traditional mobility calculation. To make mobility calculation simple, considering avoiding virtual constraints, some new formulae have been presented, however these formulae can hardly intuitively reflect general link group＇s restrictions on output member and its influences on independence of output parameters, which is premise to the judgment of the properties of mobility. Towards the problem to reveal the intrinsic relationship between the degree of freedom（DOF） of a mechanism, the link group, and the dimension of output parameters, also to avoid determination of virtual constraint, based on the new concepts of the ＂DOF of general link group＂ and ＂node parameters＂, a new formula in the calculation of the mobility of mechanisms is presented that is expressed with DOFs of the general link groups and rank of motion parameters of base point of the output link. It is named GOM（mobility of groups and output parameter） formula. On the basis of new concepts of＂effective parameters＂ and ＂invalid parameters＂, a rule is put forward for solving the DOF of mechanisms with invalid parameters by GOM formula, that is, the base point parameters are the subset of effective parameters of link group. Thereafter, several examples are enumerated and the results coincide with the prototype data, which proves the validity of the proposed formula. Meanwhile, it is obtained that the necessary and sufficient condition for the judgment of output parameters independence is that each of the DOF of the link group is not less than zero. The proposed formula which is simple in calculation provides theoretical basis for the judgment of independence of output parameters and provides references for type synthesis of novel parallel mechanisms with independence requirements of their output parameters.

Type Synthesis of Lower Mobility Parallel Mechanisms: A Review

Type synthesis of mechanisms aims to systematically determine all possible structures for a specific mobility requirement. Numerous methods based on di erent theories were proposed for type synthesis of lower mobility parallel mechanisms in past decades. However, there does not exist a comprehensive review on these approaches. Therefore, the goal of this paper is to give such a review, classifying the approaches proposed in the literature into three groups, namely, motion-based methods, constraint-based methods, and other methods. The motion-based methods include the Lie group based method, the GF set method, the linear transformation method, the POC set method,and the finite screw method. The constraint-based methods involve the screw theory-based method, the virtual chain method, the method based on Grassmann line geometry and line graphs, and the motion constraint generator method. Other methods contain the enumeration approach based on the general CGK mobility formula and the graph theory method. Upon thoroughly analyzing the characteristics and/or limitations of each method, this review provides a well reference to help researchers find an e ective synthesis method for innovative design and further scientific investigations for mechanisms.

Gait Analysis of a Radial Symmetrical Hexapod Robot Based on Parallel Mechanisms

Most gait studies of multi-legged robots in past neglected the dexterity of robot body and the relationship between stride length and body height.This paper investigates the performance of a radial symmetrical hexapod robot based on the dexterity of parallel mechanism.Assuming the constraints between the supporting feet and the ground with hinges,the supporting legs and the hexapod body are taken as a parallel mechanism,and each swing leg is regarded as a serial manipulator.The hexapod robot can be considered as a series of hybrid serial-parallel mechanisms while walking on the ground.Locomotion performance can be got by analyzing these equivalent mechanisms.The kinematics of the whole robotic system is established,and the influence of foothold position on the workspace of robot body is analyzed.A new method to calculate the stride length of multi-legged robots is proposed by analyzing the relationship between the workspaces of two adjacent equivalent parallel mechanisms in one gait cycle.Referring to service region and service sphere,weight service sphere and weight service region are put forward to evaluate the dexterity of robot body.The dexterity of single point in workspace and the dexterity distribution in vertical and horizontal projection plane are demonstrated.Simulation shows when the foothold offset goes up to 174 mm,the dexterity of robot body achieves its maximum value 0.164 4 in mixed gait.The proposed methods based on parallel mechanisms can be used to calculate the stride length and the dexterity of multi-legged robot,and provide new approach to determine the stride length,body height,footholds in gait planning of multi-legged robot.

STRUCTURE SYNTHESIS OF 4-DOF PARALLEL ROBOT MECHANISMS BASED ON SCREW THEORY

Structural synthesis for 4-DOF parallel manipulators using screw theory issystematically studied. Motion properties and constraint conditions of 4-DOF parallel manipulatorsaccording to the relationship between screw and reciprocal screw are analyzed. Mathematicalexpressions for constraint screws and twist screws of moving platform are constructed, and allpossible limbs, which provide one or more force constraints, are enumerated. Finally, a parallelmanipulator with 3-rotation-DOF and 1-translation-DOF is used as an example to describe thesynthesis procedure for symmetrical and non-symmetrical 4-DOF parallel manipulators.

New Family of 3-DOF UP-Equivalent Parallel Mechanisms with High Rotational Capability

Parallel mechanisms(PMs) having the same motion characteristic with a UP kinematic chain(U denotes a universal joint, and P denotes a prismatic joint) are called UP-equivalent PMs. They can be used in many applications, such as machining and milling. However, the existing UP-equivalent PMs suffer from the disadvantages of strict assembly requirements and limited rotational capability. Type synthesis of UP-equivalent PMs with high rotational capability is presented.The special 2 R1 T motion is briefly discussed and the fact that the parallel module of the Exechon robot is not a UP-equivalent PM is disclosed. Using the Lie group theory, the kinematic bonds of limb chains and their mechanical generators are presented. Structural conditions for constructing such UP-equivalent PMs are proposed,which results in numerous new architectures of UP-equivalent PMs. The high rotational capability of the synthesized mechanisms is illustrated by an example. The advantages of no strict assembly requirements and high rotational capability of the newly developed PMs will facilitate their applications in the manufacturing industry.

Theory of Degrees of Freedom for Parallel Mechanisms with Three Spherical Joints and Its Applications

The analysis of degrees of freedom（DOF） of a moving platform is the fundamental problem in kinematics of parallel mechanism. However, many problems should be considered to correctly perform the DOF calculation by using the traditional DOF criterion, and it is difficult to find a DOF criterion suitable for all kinds of mechanisms. A rule that can be used to determine the position and orientation of the moving platform is presented. Based on the proposed rule, a new form of DOF criterion is proposed, which is suitable for a class of parallel mechanisms with three spherical joints attached to the moving platform. The basic types of generalized limb structures are given based on the possible dimension of achieving the center of spherical joint attached to the moving platform, and the general steps of analyzing the DOF are presented. This proposed formula simplifies the DOF analysis of parallel mechanisms with spherical joints attached to the moving platform, and plays an important role in structural synthesis of such parallel mechanisms.

Topology Search of 3-DOF Translational Parallel Manipulators with Three Identical Limbs for Leg Mechanisms

Three-degree of freedom（3-DOF） translational parallel manipulators（TPMs） have been widely studied both in industry and academia in the past decades. However, most architectures of 3-DOF TPMs are created mainly on designers＇ intuition, empirical knowledge, or associative reasoning and the topology synthesis researches of 3-DOF TPMs are still limited. In order to find out the atlas of designs for 3-DOF TPMs, a topology search is presented for enumeration of 3-DOF TPMs whose limbs can be modeled as 5-DOF serial chains. The proposed topology search of 3-DOF TPMs is aimed to overcome the sensitivities of the design solution of a 3-DOF TPM for a LARM leg mechanism in a biped robot. The topology search, which is based on the concept of generation and specialization in graph theory, is reported as a step-by-step procedure with desired specifications, principle and rules of generalization, design requirements and constraints, and algorithm of number synthesis. In order to obtain new feasible designs for a chosen example and to limit the search domain under general considerations, one topological generalized kinematic chain is chosen to be specialized. An atlas of new feasible designs is obtained and analyzed for a specific solution as leg mechanisms. The proposed methodology provides a topology search for 3-DOF TPMs for leg mechanisms, but it can be also expanded for other applications and tasks.

Pressure Angle in Parallel Mechanisms: From Planar to Spatial

This paper presents the evolution process of pressure angles from planar parallel mechanisms to spatial parallel mechanisms. Manipulability and condition number, which are frequently used in the optimum design of parallel mechanisms, are introduced from serial robots at first. Then, both theoretical analysis and practical experiences demonstrate that these concepts seem imperfect when they are used in parallel mechanisms. For this reason, this paper introduces the pressure angles in planar 4-bar mechanisms to spatial parallel mechanisms, which include redundant parallel mechanisms. Two kinds of pressure angles extracted from the determinant of direct and indirect Jacobian matrices are investigated. Moreover, two comprehensive and visible global performance indices are defined, showing the advantages in evaluating the workspace, singularity and motion/force transmission capabilities. With a 2-DOF planar and a 3-DOF spatial parallel mechanism as examples, the application of the performance indices is investigated and compared with the condition number at last. The proposed concept can be extended to other spatial parallel mechanisms.

A New Method for Type Synthesis of 2R1T and 2T1R 3-DOF Redundant Actuated Parallel Mechanisms with Closed Loop Units

The current type synthesis of the redundant actuated parallel mechanisms is adding active-actuated kinematic branches on the basis of the traditional parallel mechanisms,or using screw theory to perform multiple getting intersection and union to complete type synthesis.The number of redundant parallel mechanisms obtained by these two methods is limited.In this paper,based on Grassmann line geometry and Atlas method,a novel and effective method for type synthesis of redundant actuated parallel mechanisms(PMs)with closed-loop units is proposed.Firstly,the degree of freedom(DOF)and constraint line graph of the moving platform are determined successively,and redundant lines are added in constraint line graph to obtain the redundant constraint line graph and their equivalent line graph,and a branch constraint allocation scheme is formulated based on the allocation criteria.Secondly,a scheme is selected and redundant lines are added in the branch chains DOF graph to construct the redundant actuated branch chains with closed-loop units.Finally,the branch chains that meet the requirements of branch chains configuration criteria and F&C(degree of freedom&constraint)line graph are assembled.In this paper,two types of 2 rotational and 1 translational(2R1T)redundant actuated parallel mechanisms and one type of 2 translational and 1 rotational(2T1R)redundant actuated parallel mechanisms with few branches and closed-loop units were taken as examples,and 238,92 and 15 new configurations were synthesized.All the mechanisms contain closed-loop units,and the mechanisms and the actuators both have good symmetry.Therefore,all the mechanisms have excellent comprehensive performance,in which the two rotational DOFs of the moving platform of 2R1T redundant actuated parallel mechanism can be independently controlled.The instantaneous analysis shows that all mechanisms are not instantaneous,which proves the feasibility and practicability of the method.