Security and Privacy in Solar Insecticidal Lamps Internet of Things:Requirements and Challenges

Solar insecticidal lamps(SIL) can effectively control pests and reduce the use of pesticides. Combining SIL and Internet of Things(IoT) has formed a new type of agricultural IoT,known as SIL-IoT, which can improve the effectiveness of migratory phototropic pest control. However, since the SIL is connected to the Internet, it is vulnerable to various security issues.These issues can lead to serious consequences, such as tampering with the parameters of SIL, illegally starting and stopping SIL,etc. In this paper, we describe the overall security requirements of SIL-IoT and present an extensive survey of security and privacy solutions for SIL-IoT. We investigate the background and logical architecture of SIL-IoT, discuss SIL-IoT security scenarios, and analyze potential attacks. Starting from the security requirements of SIL-IoT we divide them into six categories, namely privacy, authentication, confidentiality, access control, availability,and integrity. Next, we describe the SIL-IoT privacy and security solutions, as well as the blockchain-based solutions. Based on the current survey, we finally discuss the challenges and future research directions of SIL-IoT.

地黄花叶病毒RT-LAMP快速检测方法的建立及应用

基于反转录环介导等温扩增(reverse transcription loop-mediated isothermal amplification,RT-LAMP)技术建立了针对地黄花叶病毒(Rehmannia mosaic virus,ReMV)的快速、特异、灵敏的RT-LAMP检测方法。根据ReMV外壳蛋白(coat protein,CP)基因的核苷酸序列设计了3组LAMP引物,通过引物筛选确定最佳引物组合;利用电泳检测及可视化方法(加SYBR GreenⅠ显色剂)进行RT-LAMP温度优化、特异性检测、灵敏度比较。结果表明:本研究建立的RT-LAMP方法最适检测温度为60℃,优化后的LAMP方法能特异性检测ReMV,灵敏度是常规PCR的1000倍,可检测到1.2×10^(-1)拷贝/μL的模板浓度。对60份地黄样品的检测结果表明,RT-LAMP方法的阳性检出率为98.3%,高于常规RT-PCR方法(75%)。本研究建立的RT-LAMP检测技术为ReMV的准确检测提供了快速、高效的方法。

Photolysis of H_2S with interior microwave discharge electrodeless lamps

The luminescent properties of microwave discharge electrodeless mercury lamp（MDEL-Hg） which was ignited within the resonant cavity and photolysis of hydrogen sulfide with low concentration were studied in this paper.Experiment results indicated that the Interior MDEL-Hg could be made the best of energy utihzation and the efficiency of photolysis of H2S was very significant under the experimental conditions with the initial H2S concentration of 7.9 mg m^-1.With residence time of 1.5 s,the removal efficiency of hydrogen sulfide was 91%,the absolute removal amount（ARA） was 3.24μg s^-1 and the energy consumption was 58.23 mg（kWh）^-1.

The near-infrared spectra and distribution of excited states of electrodeless discharge rubidium vapour lamps

The population ratio between the excited states of rubidium in the electrodeless discharge rubidium vapour lamp is calculated according to the near-infrared spectra in the region of 780-1550 nm. By using a 1529 nm laser, we measure the density of natural rubidium atoms at the 5P3/2 level. The populations of different excited states are then clarified.

鸽新城疫病毒可视化LAMP检测方法的建立与应用

为建立一种简便、快速,适用于基层检测鸽Ⅰ型副黏病毒的方法,研究针对鸽Ⅰ型副黏病毒全基因组保守序列,设计了1组可检测基因Ⅵ、Ⅶ、ⅩⅩ、ⅩⅪ型分离株的环介导等温扩增(LAMP)引物,通过优化反应条件及体系,建立鸽Ⅰ型副黏病毒可视化LAMP检测方法。结果显示:建立的鸽Ⅰ型副黏病毒可视化LAMP检测方法可检测基因Ⅵ、Ⅶ、ⅩⅩ、ⅩⅪ型鸽新城疫病毒,与H9亚型禽流感病毒、马立克病病毒、禽网状内皮组织增殖病病毒、小鹅瘟病毒以及禽白血病病毒以及新城疫病毒La Sota疫苗株均无交叉反应,最低检测限为10^(1)copies/μL。研究表明所建立的鸽Ⅰ型副黏病毒可视化LAMP检测方法快速、简便,特异性强,灵敏度高,可应用于基层快速检测鸽Ⅰ型副黏病毒。

Starting of HPS lamps driven by electronic ballast

A complete research of two different starting techniques for HPS lamps driven by electronic ballast is presented while a traditional starting technique based on the series resonant theory which is used widely for fluorescent lamps starting is analyzed in detail. An improved nth harmonic resonant technique is also simulated. Furthermore, a novel starting technique based on a pulse transformer is proposed, which still offer the automatic switch off capability. The differences between two starting techniques are explained. The experimental results from a lab prototype are used to verify the design.

Control Effects of Trapping Lamps with Different Wavelengths on Soybean Pests

[ Objective] The aim was to compare control effects of trapping lamps with different wavelengths on soybean pests. [ Method ] Three kinds of lamps with different wavelengths were used to conduct pest control test in soybean fields. [ Result] The trapping effects of three kinds of lamps with different wavelengths on soybean pests were significantly different. Among them, the trapping effect of No. 2 light with wavelength of 400 -460 nm was significantly better than the other two lamps; No. 1 light with wavelength of 330 -400 nm had no obvious difference in trapping effect with No. 3 light with wavelength of 450 -510 nm. [ Conclusion] The research result provided theoretical basis for popularized application of trapping lamp in production.

Axial Magnetic Field Effects on Xenon Short-Arc Lamps

The effect of an axial magnetic field （AMF） on an old xenon short-arc lamp is experimentally investigated in this work. As the AMF increases up to 18 roT, the visible radiation power and electric power ascend more than 80% and 70% respectively, and the radiation efficiency is improved by 23% for the best increment at 12 mT AMF. The measurement of radiation intensity shows that the increment of radiation intensity comes mostly from the plasma area close to the cathode tip, and partially from the other area of the arc column. Successive images of the arc indicate that the arc column not only rotates about its axis, but revolves around the axis of electrodes with the AMF. The arc column structure is constricted, distorted and elongated as the AMF increases. It is suggested that the improvements of the radiation intensity and radiation efficiency are attributed to the constriction of the arc column, which is mainly induced by the enhanced cathode jet.

Study on Thermal Expansion Coefficient of Sealing Materials for Ceramic Metal Halide Lamps

With Al2O3, Dy2O3, and SiO2 as starting materials, the basic glass of Al2O3-Dy2O3-SiO2 system was prepared by conventional melting technology, and their thermal expansion coefficients （TECs） at different anneal time were investigated. TECs of the basic glass, which were heat-treated under different temperature, were also investigated. The result showed that TECs of the basic glass gradually approached a fixed value as the anneal time was extended, which suggested that most of the inner stress had been eliminated. After heat treatment, the contents of Dy2O3, Dy2Si2O7, and a new crystal increased up to 1200 ℃ and decreased below 1250 ℃, which was consistent with the TEC change of crystallized samples. This suggests that the crystal has a direct effect on TECs of the crystallized samples.

Modelling of Ar-Hg Electrodeless Lamps

A self-consistent model of high-frequency electrodeless lamps with internM coils is developed. Radial distributions of the plasma parameters are obtained. Mercury lines with wavelength of 435.8 nm and 365 nm are measured to testify the model. Based on the model, the population of resonance state 63p1 of mercury in dependence on the argon pressure and driving frequency is calculated. It is shown that the population of 63p1 of mercury is larger when the argon pressure is between 26.6 Pa and 53.2 Pa. Meanwhile the driving frequency has little influence on the population of 63P1.

Influence of the Gas Mixture Ratio on the Correlations Between the Excimer XeCl Emission and the Sealed Gas Temperature in Dielectric Barrier Discharge Lamps

For dielectric barrier discharge lamps filled with various gas mixture ratios, the correlations between the excimer XeCl* emission and the sealed gas temperature have been founded, and a qualitative explication is presented. For gas mixture with chlorine larger than 3%, the emission intensity increases with the sealed gas temperature, while with chlorine about 2%, the emission intensity decreases with the increase in the gas temperature, and could be improved by cooling water. However, if chlorine is less than 1.5%, the discharge appears to be a mixture mode with filaments distributed in a diffused glow-like discharge, and the UV emission is independent on the gas temperature.

Characteristic Properties of Advanced Coil-External Electrodes of Fluorescent Lamps

The coil-EEFL lamps, which are operated with DC driving circuit, have studied. The figure of the merit of the coil-EEFL lamps is the quantum efficiency (ηq) that is given by the emitted visible photons by one moving electron in the FL lamp. The electrons in the FL lamps move on in the superconductive vacuum (R = 0) in the positive column at above room temperature, giving rise to the astronomical ηq = 1013 visible photons (m3.s)-1. Miraculously, the developed coil-EEFL lamps in the parallel connections light up with WDC = 0, without the sacrifice of the illuminance (lm.m-2). Furthermore, the scraped 40 W-HCFL lamps revitalize to the coil-EEFL lamps, promising the operation life longer than 106 hours. The shallow gap between phosphor screen and positive column can be made by side by side arrangement of the low voltage CL phosphor particles and PL phosphor particles. The coil-EEFL lamps in parallel connections may contribute to the Green Energy Projects of UN.

Novel Automotive High Intensity Discharge(HID) Lamps with Electronic Ballasts

A new scheme of automotive high intensity discharge(HID) lamps with electronic ballasts is proposed. The design of the proposed ballast and some experimental results are presented. The proposed scheme is consisted of the high frequency DC-DC converter and the low frequency DC-AC inverter. This system separates the input voltage of the ignitor from DC link voltage using auxiliary winding, then it could use the lower voltage rating power devices for HID lamp ballast system and reduce the size of HID lamp ballast. The proposed ballast controller using micro-controller unit(MCU) controls the frequency to operate the DC-DC converter in critical conduction mode, which reduces the noise of the circuit and improves the efficiency by 2%~4%.

Application of LED Type Lamps in Domestic and Public Utilities and Gain Capability to Run New Small Investments in Rwanda

The Rwandan State-run Energy Water and Sanitation Authority Company (EWSA) is rapidly increasing the number of population having access to electrical power energy. 30% of electrical energy is used in lighting. The incandescent bulbs, compact fluorescent lamp bulbs as well as fluorescent tubes are mostly used to convert electrical energy into light. The said light sources have many disadvantages such as excessive power consumption leading to giant bills of electricity, short life span leading to continuous replacement of lamps, and emission of CO2. Application of light-emitting diode (LED) lamps in lighting in long term suppresses the aforementioned problems resulting into saving of money that will be used for running new small investments.

Internet of Lamps for Future Ubiquitous Communications:Integrated Sensing,Hybrid Interconnection,and Intelligent Illumination

The ubiquitous deployment and restricted consumption are the requirements restricting the development of Internet of Things.Thus,a promising technology named Internet of Lamps(Io L)is discussed in this paper to address these challenges.Compared with other communication networks,the remarkable advantage of Io L is that it can make full use of the existing lighting networks with sufficient power supply.The lamps can be connected to the Internet through wired power line communication and/or wireless communication,while the integration of integrated sensing,hybrid interconnection,and intelligent illumination is realized.In this paper,the Io L is discussed from three aspects including sensing layer,network layer,and application layer,realizing the comprehensive upgrade based on the conventional communication and illumination systems.Meanwhile,several novel technologies of Io L are discussed based on the requirements of sensing,communication,and control,which have put forward practical solutions to the issues faced by Io L.Moreover,the challenges and opportunities for Io L are highlighted from various parts of the system structure,so as to provide future insights and potential trends for researchers in this field.

Recalibration of working standard lamps

In the present work, recalibration of the National Institute for Standards （NIS, Egypt） working standard lamps from Osram Inc. and their associated expanded uncertainty budget were done. A set-up composed of an integrating sphere, a standard photometer and a group of five luminous flux standard lamps ranged from 25 to 200 W calibrated and traceable to the National Physical Laboratory （NPL, UK） is used to measure and recalibrate the total luminous flux for these five working standard lamps. After recalibration, NIS （Egypt） maintains the national scales for luminous flux in lumen.

草莓白化伴随病毒RT-LAMP检测方法的建立

草莓白化伴随病毒(strawberry pallidosis-associated virus,SPaV)能引起草莓白化病,与其他病毒复合侵染后会加重症状。本研究建立了SPaV的反转录环介导等温扩增方法(reverse transcription-loop-mediated isothermal amplification,RT-LAMP),对反应体系的各条件进行评估优化后,检测了RT-LAMP的特异性和灵敏度,且对田间样品进行了测试。结果表明,优化后的反应体系包含2.5μL 10×Isothermal Amplification Buffer、6 mmol/L Mg^(2+)、1 mmol/L dNTPs、1μmol/L SPaV-FIP和SPaV-BIP,0.1μmol/L SPaV-F3和SPaV-B3,0.3μmol/L SPaV-LB,0.4 mol/L Betaine,0.256 U/μL WarmStart Bst 2.0 DNA Polymerase,0.12 U/μL WarmStart RTx Reverse Transcriptase,1μL RNA,反应条件为61℃恒温孵育40 min。采用优化后的反应体系,在特异性检测中,只有携带了病毒SPaV的样品才能发生阳性扩增。灵敏度测试中,RT-LAMP比RT-PCR灵敏度高10倍。田间应用中,RT-LAMP和RT-PCR检测结果一致。本研究建立的SPaV RT-LAMP检测方法操作简便、快速、特异,可供实验室及生产实践中应用,助力脱毒种苗的鉴定和田间病毒病调查。

Flash Lamps as Ignition and Initiation Sources of the VS-2 Pyrotechnic Composition

In the present work it is found that the pyrotechnic composition VS⁃2 can be initiated with flash lamps IFC⁃500 and EVIS.VS⁃2 pyrotechnic composition contains 90%of mercury(Ⅱ)5⁃hydrazinotetrazolate perchlorate and 10%of optically trans⁃parent copolymer of 2⁃methyl⁃5⁃vinyltetrazole and methacrylic acid(PVMT).We have found that the flash lamps make it possi⁃ble to initiate combustion of VS⁃2 composition with its transition to detonation both in cylindrical charges placed in brass caps of 5 mm diameter and 2 mm high,and film charges with 10 mm×80 mm in size and surface weights of 60 mg·cm^(-2)and 90 mg·cm^(-2),showing ignition delay times 10μs and 3μs,respectively.We also measured detonation velocities for VS⁃2 composition film charges,which were 4375-4505 m·s^(-1)(of the charge being surface mass 60 mg·cm^(-2))and 4221-4281 m·s^(-1)(of the charge be⁃ing surface mass 90 mg·cm^(-2))and their blasting action on the aluminum plate.The depths of the normal shock wave imprints at the charge⁃barrier interface were 0.6-0.7 mm(for surface mass of the film charges 60 mg·cm^(-2))and 1.2-1.3 mm(for surface mass of the film charges 90 mg·cm^(-2))

Jinghai Luminescence Lamps

Incandescent light consists of 10 percent visible light and 90 percent infrared ray that gives out heat. Now modern luminescence lamps made of halogydrin tungsten and a cold-light mirror separate the light with heat. Containing neither infrared ray nor ultraviolet light, these lamps are small, durable and three times more powerful than other lamps of the same wattage.

Design, Manufacturing ＆ Evaluationof Solar Tubular Lamps Using Optical Reflectors

The aim of this research is to find the best way to take advantage of solar radiation in the lighting of sites to reduce reliance on electric power So In this paper, design and implementation of a pipe lamps contain optical reflectors where three types of adoption of the lamps are different diameters and lengths with reflectors visual reflect solar radiation by 84% and tested practicable ＂in the laboratory room dimensions using Lux Meter device and enter the data in the program （surfer） the fee distribution of the intensity of radiation in the room laboratory ratios has been found that the intensity distribution of light inside the room are adversely affected＂ with the decrease in diameter of lamp At less intensity in half at reducing the tube diameter by 25% and increases with tube diameter, and vice versa for the impact of length where the intensity is light distribution higher when the lamp is tubular Short at the intensity of the radiation increases by 20% when you reduce the length of the tube in half, as well as show that weather factors such as dust and clouds adversely affected to the efficient functioning of the lamps and the intensity distribution of light in the room.