Multifunctional Lubricant Additive Improves Lubrication and Antioxidation Properties of Tung Oil

It is of considerable significance to develop efficient and environmentally friendly machinery lubricant additives because of the increasing depletion of petrochemical resources and severe environmental problems.Herein,we proposed a facile strategy to synthesize a multifunctional vegetable oil-based lubricant via the lignin derivative vanillin coupled to amine and diethyl phosphite to produce a lubricating additive with both extreme pressure and antioxidant properties.Compared with pure tung oil,the lubricating and antioxidant performance of tung oil is significantly improved after adding additives.Adding the 1.0 wt%additive to the tung oil reduced the friction wear coefficient and the volume,and the oxidation induction time was much longer than pure tung oil.

Identification of Lubricating Oil Additives Using XGBoost and Ant Colony Optimization Algorithms

To address the problem of identifying multiple types of additives in lubricating oil,a method based on midinfrared spectral band selection using the eXtreme Gradient Boosting(XGBoost)algorithm combined with the ant colony optimization(ACO)algorithm is proposed.The XGBoost algorithm was used to train and test three additives,T534(alkyl diphenylamine),T308(isooctyl acid thiophospholipid octadecylamine),and T306(trimethylphenol phosphate),separately,in order to screen for the optimal combination of spectral bands for each additive.The ACO algorithm was used to optimize the parameters of the XGBoost algorithm to improve the identification accuracy.During this process,the support vector machine(SVM)and hybrid bat algorithms(HBA)were included as a comparison,generating four models:ACO-XGBoost,ACO-SVM,HBA-XGboost,and HBA-SVM.The results showed that all four models could identify the three additives efficiently,with the ACO-XGBoost model achieving 100%recognition of all three additives.In addition,the generalizability of the ACO-XGBoost model was further demonstrated by predicting a lubricating oil containing the three additives prepared in our laboratory and a collected sample of commercial oil currently in use。

Tribological Properties of Few-layer Graphene Oxide Sheets as Oil-Based Lubricant Additives

The performance of a lubricant largely depends on the additives it involves. However, currently used additives cause severe pollution if they are burned and exhausted. Therefore, it is necessary to develop a new generation of green additives. Graphene oxide（GO） consists of only C, H and O and thus is considered to be environmentally friendly. So the tribological properties of the few-layer GO sheet as an additive in hydrocarbon base oil are investigated systematically. It is found that, with the addition of GO sheets, both the coefficient of friction（COF） and wear are decreased and the working temperature range of the lubricant is expanded in the positive direction. Moreover, GO sheets has better performance under higher sliding speed and the optimized concentration of GO sheets is determined to be 0.5wt%. After rubbing, GO is detected on the wear scars through Raman spectroscopy. And it is believed that, during the rubbing, GO sheets adhere to the sliding surfaces, behaving like protective films and preventing the sliding surfaces from contacting with each other directly. This paper proves that the GO sheet is an effective lubricant additive, illuminates the lubrication mechanism, and provides some critical parameters for the practical application of GO sheets in lubrication.

Tribological behaviors of graphene oxide partly substituted with nano-SiO_(2) as lubricant additives in water for magnesium alloy/steel interfaces

Although graphene oxide(GO)has emerged as an excellent lubricant additive in water,there remain great challenges in their practical application due to high production costs.By taking into account the low cost and also its excellent tribological properties,it is likely that nano-SiO_(2)can be used as a lubricant additive to partially replace GO.Hence,this paper aims to explore the tribological properties of nano-SiO_(2)incorporated in GO nanofluids for partial GO replacement by investigating the friction coefficient and wear volume of the prepared SiO_(2)/GO hybrid nanofluids for magnesium alloy/steel sliding pairs.The experiments reveal that the SiO_(2)/GO hybrids retain low friction coefficients as compared to individual GO or SiO_(2)at all test conditions in this study.However,as for the bearing capacity test,all samples can provide a low wear volume under the loads of 1 and 3 N.With the increase of the normal load,there is considerable differences in the anti-wear behavior.Compared with that of individual GO nanofluids,the wear volume of the GO/SiO_(2)(mass ratio of 0.3:0.2)hybrid nanofluids was reduced by50.5%at 5 N and by 49.2%at 8 N.Furthermore,the wear volume of the GO/SiO_(2)(mass ratio of 0.3:0.2)hybrid nanofluids was reduced by46.3%under the rigorous conditions,as compared to individual GO nanofluids.The findings provide new insights into developing carbon nanomaterial-based hybrid nanofluids for magnesium alloy formation.

Study on Tribology Performance of Different Lubricant Additives under Atmospheric Pressure and High Vacuum Conditions

By using PAO-10 as the base oil, the tribological behavior of 11 additives under high vacuum condition was evaluated. By adopting some surface analytical instruments, such as scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) and X-ray photoelectron spectroscopy(XPS), the tribological mechanisms of these additives were studied. In air, O_2 can react with metal to form metal oxide that can protect the surfaces of rubbing pair during the tribological tests. According to the theory of the competitive adsorption, the function of some active elements is weakened. In a vacuum environment, the additives contributed more to the lubrication performance. The sulfur-containing additives could react with Fe to produce Fe Sx and "M—C" bonds("M" represents metal). They both had contributions to the lubrication. As for the phosphorus-containing additives, they only generated the phosphates during the tests. When the sulfur and phosphorus-containing additives were applied, the generated phosphates and Fe Sx had the primary contribution to the lubrication performance during the tests.

Preparation and Tribological Properties of Lanthanum-doped Muscovite Composite Particles as Lubricant Additives in Lithium Grease

Lanthanum-doped muscovite(MC) composite particles(hereinafter abbreviated as La-MC) were prepared by the mechanical solid-state-chemistry-reaction method, followed by surface modification with oleic acid. The microstructure of materials was characterized by SEM, XRD, EDS and FTIR. Furthermore, the friction-reduction and anti-wear properties of MC and La-MC as lubricant additives in lithium grease were evaluated using a four-ball friction and wear tester. The results showed that La(OH)_3 nanoparticles were coated on the surface of muscovite. Both MC and La-MC can effectively improve the friction-reduction and anti-wear properties of lithium grease and La-MC presents better tribological properties than MC. The excellent tribological properties of La-MC can be attributed to the formation of the adsorbed La-MC film and the chemical reaction film mainly composed of Fe_2O_3 and SiO_2 on the worn surface, as well as the catalysis of lanthanum element during the friction process.

Synthesis and Tribological Behaviour of 1,3,4-Thiadiazole Schiff Base Derivatives as Multifunctional Lubricant Additives

Six new 1,3,4-thiadiazole Schiff base derivatives were synthesized and characterized by IR spectroscopy and ~1H NMR spectrometry, and their anti-corrosion properties and thermal stability were investigated via thermogravimetric analysis(TGA) and copper strip corrosion test. The tribological behavior of the said Schiff base derivatives was evaluated on an Optimol SRV~?4 oscillating reciprocating friction and wear tester. The worn surfaces of the steel discs were investigated using a scanning electron microscope(SEM) and energy dispersive X-ray spectrometer(EDS). The test results indicated that these thiadiazole Schiff base derivatives possessed favourable thermal stability, corrosion inhibiting ability and the capability of improving the tribological characteristic of the base oil effectively. It is assumed that the adsorbed additives probably reacted with the steel surfaces during the friction process, resulting in the formation of a protective film composed of sulphates, sulphides and organic nitrogen compounds.

Investigation of Antioxidative Properties of Multifunctional Additives of Alkyl Phenolate Type and Development of New Lubricant Compositions

The results of studies of the antioxidant properties of multifunctional alkylphenolate type additives indicate the calcium salts of condensation products of alkylphenols(C8-C12)with formaldehyde and the following amines:aminoacetic acid,benzotriazole,diethanolamine and boric acid,as well as their carbonated compounds.The determination of the antioxidant properties of the additives is tested on theАПСМ-1M apparatus.New lubricant compositions for diesel internal combustion engines oil meeting the required standards for these oils have been developed.The study of additives,which possess simultaneously detergent-dispersing,neutralizing,antioxidant anti-wear properties,revealed the dependence of antioxidant properties on their alkalinity.

In-situ formation of nitrogen doped microporous carbon nanospheres derived from polystyrene as lubricant additives for anti-wear and friction reduction

This study presents a nitrogen-doped microporous carbon nanospheres(N@MCNs)prepared by a facile polymerization–carbonization process using low-cost styrene.The N element in situ introduces polystyrene(PS)nanospheres via emulsion polymerization of styrene with cyanuric chloride as crosslinking agent,and then carbonization obtains N@MCNs.The as-prepared carbon nanospheres possess the complete spherical structure and adjustable nitrogen amount by controlling the relative proportion of tetrachloromethane and cyanuric chloride.The friction performance of N@MCNs as lubricating oil additives was surveyed utilizing the friction experiment of ball-disc structure.The results showed that N@MCNs exhibit superb reduction performance of friction and wear.When the addition of N@MCNs was 0.06 wt%,the friction coefficient of PAO-10 decreased from 0.188 to 0.105,and the wear volume reduced by 94.4%.The width and depth of wear marks of N@MCNs decreased by 49.2% and 94.5%,respectively.The carrying capacity of load was rocketed from 100 to 400 N concurrently.Through the analysis of the lubrication mechanism,the result manifested that the prepared N@MCNs enter clearance of the friction pair,transform the sliding friction into the mixed friction of sliding and rolling,and repair the contact surface through the repair effect.Furthermore,the tribochemical reaction between nanoparticles and friction pairs forms a protective film containing nitride and metal oxides,which can avert direct contact with the matrix and improve the tribological properties.This experiment showed that nitrogen-doped polystyrene-based carbon nanospheres prepared by in-situ doping are the promising materials for wear resistance and reducing friction.This preparing method can be ulteriorly expanded to multi-element co-permeable materials.Nitrogen and boron co-doped carbon nanospheres(B,N@MCNs)were prepared by mixed carbonization of N-enriched PS and boric acid,and exhibited high load carrying capacity and good tribological properties.

An inorganic–organic hybrid CQDs@PVP lubricant additive:Achieving low friction and wear in PEG and water

High-temperature lubrication has always been a hot topic in the lubricant and grease industry,and is also an essential concern in the high-end equipment sector to be addressed.Carbon quantum dots(CQDs)are an emerging material widely applied in the field of lubrication,owing to their exceptional lubricity and high load-bearing capacity.However,the vulnerability of CQDs to oxidation in air and reduced stability dramatically restrict their high-temperature application capability.In this study,a nanocomposite of amphiphilic polyvinyl pyrrolidone(PVP)homopolymer with excellent lubricating properties and thermal stability,which is hydrogen bonded to CQDs(CQDs@PVP),was designed to achieve low friction and wear of lubricants at high temperatures.The CQDs@PVP are consistently dispersed in both PEG400 and water,and exhibit superior lubricity compared to unmodified CQDs at high temperatures(ranging from 200‒150°C and 90‒50°C).Meanwhile,the dense carbon film on the wear surface and the chemically reactive film of iron compounds directly contribute to the enhanced lubrication performance.These analytical results demonstrate the powerful candidacy of CQDs@PVP as a lubrication additive and promote future high-temperature applications of CQDs in industrial production.

Research progresses of nanomaterials as lubricant additives

Friction and wear are unavoidable in mechanical movement.The use of lubricants with nano-additives can effectively reduce friction and wear,which is of great significance to saving energy and protecting the environment.At present,great progress has been made in the scientific research and industrial application of nano-additives for lubricants.This paper mainly introduces the types of nano-additives for lubricants(such as carbon nanomaterials,nano-metals,nano-oxides,sulfides,complexes,polymers,etc.),the tribological properties of lubricants with different components of nano-additives,and the lubrication mechanisms of the nano-additives(including tribofilm formation,rolling ball bearing effect,repairing effect,polishing effect,and synergistic effect).It also deals with the dispersion of nano-additives in lubricants and the influences of their particle size and microstructure on the tribological properties of lubricants.This review outlines the performance requirements of nano-additives in different lubrication states,discusses the use of nano-additives in challenging working conditions,and identifies various industrial oil nano-additives with reference to the appropriate options in diverse working environments.Furthermore,the existing problems of nano-additives and their application prospects are summarized.This review,hopefully,would help to shed light on the design and synthesis of novel high-performance nano-additives and promote their application in engineering.

Synergistic Effect between Nano-ceramic Lubricating Additives and Electroless Deposited Ni-W-P Coating

The major solving ways for the material wear are surface modification and lubrication. Currently, the researches at home and abroad are all limited to the single study of either nano-lubricating oil additive or electroless deposited coating. The surface coating has high hardness and high wear resistance, however, the friction reduction performance of the coating with high hardness is not good, the thickness of the coating is limited, and the coating can not regenerate after wearing. The nano-lubricating additives have good tribological performance and self-repair function, but under heavy load, the self-repair rate to the worn surface with the nano-additives is smaller than the wearing rate of the friction pair. To solve the above problems, the Ni-W-P alloy coating and deposition process with excellent anti-wear, and suitable for industrial application were developed, the optimum bath composition and process can be obtained by studying the influence of the bath composition, temperature and PH value to the deposition rate and the plating solution stability. The tribological properties as well as anti-wear and friction reduction mechanism of wear self-repair nano-ceramic lubricating additives are also studied. The ring-block abrasion testing machine and energy dispersive spectrometer are used to explore the internal relation between the coating and the nano-lubricating oil additives, and the tribology mechanism, to seek the synergetic effect between the two. The test results show that the wear resistance of Ni-W-P alloy coating （with heat treatment and in oil with nano-ceramic additives） has increased hundreds times than 45 steel as the metal substrate in basic oil, the friction reduction performance is improved. This research breaks through the bottleneck of previous separate research of the above-mentioned two methods, and explores the combination use of the two methods in industrial field.

Nanostructured lubricant additives for titanium alloy:Lubrication by the solid-liquid interface with Coulomb repulsion

In this work,the advantage of Coulomb repulsion in the intermolecular forces experienced by molecules on the solid–liquid nanosized contact interface is taken,and the superior friction-reducing property of Cu_(3)(PO_(4))2·3H_(2)O(CuP)oil-based additives has been confirmed for titanium alloy.Three-dimensional(3D)CuP nanoflowers(CuP-Fs)with a strong capillary absorption effect are prepared to achieve the homogeneous mixing of solid CuP and lubricating oil.Lubrication by CuP-Fs additives for titanium alloy,friction coefficient(COF)can be reduced by 73.68%,and wear rate(WR)reduced by 99.69%.It is demonstrated that the extraordinary friction-reducing property is due to the repulsive solid–liquid interface with low viscous shear force originating from Coulomb repulsion between polar water molecules in CuP and non-polar oil molecules.However,any steric hindrance or connection between this repulsive solid–liquid interface will trigger the adhesion and increase the viscous shear force,for example,dispersant,hydrogen bondings,and shaky adsorbed water molecules.Besides,the lamellar thickness of CuP and the molecular size of lubricant both have a great influence on tribological properties.Here the lubrication mechanism based on interface Coulomb repulsion is proposed that may help broaden the scope of the exploration in low-friction nanomaterial design and new lubricant systems.

Comparison of Lubricities of Two Novel Benzotriazole Derivatives Used as Additives in Water-Glycol Hydraulic Fluid

Two kinds of benzotriazole derivatives with and without sulfur （abbreviated as BSC and BC, respectively,） were synthesized and their lubricating, anticorrosion and antirust properties were investigated, when they were used as additives in the water-glycol fluid. The morphology and chemical species of typical elements on the worn surface were examined by the scanning electron microscopy （SEM）, the energy dispersive spectrometry （EDS）, and the X-ray photoelectron spectroscopy （XPS） in order to reveal the tribological mechanisms. The results indicated that two synthesized additives could effectively improve the anti-wear, friction-reducing, load-carrying, anticorrosion, and antirnst properties of the base fluid. The surface analysis illustrated that stable nitrogen-containing absorption films generated by BC should be responsible for its facilitated anti-wear and friction-reducing performance, and the excellent lubricities of BSC should be attxibuted to the combined action of adsorption film and tribo-chemical film which were composed of iron oxides, iron sulfides and iron sulfates. The superior lubricating properties of BSC as compared to that of BC demonstrated the effectiveness of elemental sulfur in reducing friction and wear, especially under high loads. But corrosion wear is more obvious at a relative high concentration of elemental sulfur.

Design of wear-out-failure in-situ repair parts by environment-friendly nanocopper additive

Oleic acid surface-modified Cu nanoparticles with an average size of 20 nm were prepared by liquid phase reducing reaction. The tribological performance and mechanism of nanocopper as additive were studied by means of tribotester, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and nanoindentation instrument. The results indicate that the modified nanocopper additive can significantly improve the wear resistance and reduce friction coefficient of base oil. A copper protective film is formed and contributes to the excellent tribological properties of nanocopper additive. On the basis of the film forming mechanism, a new in-situ repair method was designed and used to repair wear-out-failure injection pump plunger and barrel. Furthermore, the current research progress of nanoparticles as green energy-saving lubricating oil additives were presented.

Scalable preparation of functionalized graphite nanoplatelets via magnetic grinding as lubricity-enhanced additive

Graphite nanoplatelets were prepared by a novel magnetic-grinding method using self-made equipments. Under a variant magnetic field, magnetic needles collided at a high rotating speed and exfoliated pristine graphite into graphite nanoplatelets with high efficiency. The obtained graphite nanoplatelets are highly crystalline, and the thickness is less than 10 nm. Moreover, the surface area could reached 738.1 m^2/g with a grinding time of 4 h. Silanized graphite nanoplatelets can disperse well in SG 15W-40 engine oil and serve as lubricant additive. Tribological results indicate that the friction coefficient and wear-scar of the friction pairs are lower than 76% and 41%, respectively, by adding 1.5‰(mass fraction) of silanized graphite nanoplatelets. Notably, the functionalized graphite nanoplatelets can realize large-scale production and commercial application.

The Effect and Mechanism of Nano-Cu Lubricating Additives on the Electroless Deposited Ni-W-P Coating

The coating and deposition process with excellent anti wear and suitable for industrial application were developed, and the optimum bath composition and process were obtained by studying the influence of the bath composition, temperature and pH value on the deposition rate and the plating solution stability. Moreover, the tribological properties of nano-Cu lubricating additives and electroless deposited Ni-W-P coating as well as their synergistic effect are researched using ring-block abrasion testing machine and energy dispersive spectrometer. Research results show that Ni-W-P alloy coating and nano-Cu lubricating additive have excellent synergistic effect, e g, the wear resistance of Ni-W-P alloy coating （with heat treatment and the oil with nano-Cu additives） has increased hundreds times than 45 steel as the metal substrate with the basic oil, and zero wear is achieved, which breaks through the bottleneck of previous separate research of the above-mentioned two aspects.

Preparation of nano-copper as lubrication oil additive

Nano-copper used as lubrication oil additive has good tribological property and active self-repairing effect for friction pairs. The reduction in liquid phase for preparing nano-additive is one of the most common method. Nano-copper was prepared by reduction in liquid phase. The different project and routine practice for preparing nano-copper were researched. The dispersion problem of nano-copper was investigated by surface treatment and high dispersion. The particles dimension, the dispersion stability and the purity of nano-copper were characterized by TEM and XRD. The conclusion indicates that the methods of the preparation and dispersion can obtain 20nm copper additive with good dispersion property in lubrication oil.

Modified Vegetable Oil Based Additives as a Future Polymeric Material—Review

Polymeric materials from renewable resources have attracted a lot of attention in recent years. The development and utilization of vegetable oils for polymeric materials are currently in the spotlight of the polymer and chemical industry, as they are the largest renewable platform due to their universal wide availability, ingrained biodegradability, low cost, and excellent environmental aspects (i.e., low ecotoxicity and low toxicity toward humans). These excellent natural characteristics are now being taken advantage of in research and development, with vegetable oil derived polymers/polymeric materials/composites being used in numerous applications including paints and coatings, adhesives, and nanocomposites. The aim of this review paper is to give a fundamental description of the various vegetable oil applications in polymer materials and its recent developments. Particular emphasis will be placed on study and main application of triglyceride based additive for polymer and to give the reader an insight into the main developments is discussed.