非稳态点接触EHL问题高效直接算法研究

发展了一种研究非稳态点接触弹流润滑(Elastohydrodynamic Lubrication,简称EHL)的快速直接算法。在弹流求解过程中,通过分析计算域网格离散的特点,对离散后的Reynolds方程采取按列分块、逐列求解的求解策略,使每个时间步长上求解的方程维数显著减小,从而极大地提高了计算效率。运用新算法获得了点接触EHL纯挤压工况下油膜和压力演变过程中的典型特征,证明了新算法的正确性;数值实验和比较证明,新算法具有复合直接迭代法无可比拟的高效率,与逐行迭代法相比,新算法也具有显著的、更高的计算效率,并且随着网格数量的增加,新算法的高效性愈加凸显。

Tribological Mechanism of Graphene and Ionic Liquid Mixed Fluid on Grinding Interface under Nanofluid Minimum Quantity Lubrication

Graphene has superhigh thermal conductivity up to 5000 W/(m·K),extremely thin thickness,superhigh mechanical strength and nano-lamellar structure with low interlayer shear strength,making it possess great potential in mini-mum quantity lubrication(MQL)grinding.Meanwhile,ionic liquids(ILs)have higher thermal conductivity and better thermal stability than vegetable oils,which are frequently used as MQL grinding fluids.And ILs have extremely low vapor pressure,thereby avoiding film boiling in grinding.These excellent properties make ILs also have immense potential in MQL grinding.However,the grinding performance of graphene and ionic liquid mixed fluid under nano-fluid minimum quantity lubrication(NMQL),and its tribological mechanism on abrasive grain/workpiece grinding interface,are still unclear.This research firstly evaluates the grinding performance of graphene and ionic liquid mixed nanofluids(graphene/IL nanofluids)under NMQL experimentally.The evaluation shows that graphene/IL nanofluids can further strengthen both the cooling and lubricating performances compared with MQL grinding using ILs only.The specific grinding energy and grinding force ratio can be reduced by over 40%at grinding depth of 10μm.Work-piece machined surface roughness can be decreased by over 10%,and grinding temperature can be lowered over 50℃at grinding depth of 30μm.Aiming at the unclear tribological mechanism of graphene/IL nanofluids,molecular dynamics simulations for abrasive grain/workpiece grinding interface are performed to explore the formation mechanism of physical adsorption film.The simulations show that the grinding interface is in a boundary lubrication state.IL molecules absorb in groove-like fractures on grain wear flat face to form boundary lubrication film,and graphene nanosheets can enter into the grinding interface to further decrease the contact area between abrasive grain and workpiece.Compared with MQL grinding,the average tangential grinding force of graphene/IL nanofluids can decrease up to 10.8%.The interlayer shear effect and low interlayer shear strength of graphene nanosheets are the principal causes of enhanced lubricating performance on the grinding interface.EDS and XPS analyses are further carried out to explore the formation mechanism of chemical reaction film.The analyses show that IL base fluid happens chemical reactions with workpiece material,producing FeF_(2),CrF_(3),and BN.The fresh machined surface of workpiece is oxidized by air,producing NiO,Cr_(2)O_(3) and Fe_(2)O_(3).The chemical reaction film is constituted by fluorides,nitrides and oxides together.The combined action of physical adsorption film and chemical reaction film make graphene/IL nano-fluids obtain excellent grinding performance.

Tribological Performance of Different Concentrations of Al_(2)O_(3)Nanofluids on Minimum Quantity Lubrication Milling

Nanofluid minimum quantity lubrication(NMQL)is a green processing technology.Cottonseed oil is suitable as base oil because of excellent lubrication performance,low freezing temperature,and high yield.Al_(2)O_(3)nanoparticles improve not only the heat transfer capacity but also the lubrication performance.The physical and chemical proper-ties of nanofluid change when Al_(2)O_(3)nanoparticles are added.However,the effects of the concentration of nanofluid on lubrication performance remain unknown.Furthermore,the mechanisms of interaction between Al_(2)O_(3)nanoparti-cles and cottonseed oil are unclear.In this research,nanofluid is prepared by adding different mass concentrations of Al_(2)O_(3)nanoparticles(0,0.2%,0.5%,1%,1.5%,and 2%wt)to cottonseed oil during minimum quantity lubrication(MQL)milling 45 steel.The tribological properties of nanofluid with different concentrations at the tool/workpiece interface are studied through macro-evaluation parameters(milling force,specific energy)and micro-evaluation parameters(surface roughness,micro morphology,contact angle).The result show that the specific energy is at the minimum(114 J/mm^(3)),and the roughness value is the lowest(1.63μm)when the concentration is 0.5 wt%.The surfaces of the chip and workpiece are the smoothest,and the contact angle is the lowest,indicating that the tribological proper-ties are the best under 0.5 wt%.This research investigates the intercoupling mechanisms of Al_(2)O_(3)nanoparticles and cottonseed base oil,and acquires the optimal Al_(2)O_(3)nanofluid concentration to receive satisfactory tribological properties.

Effect of Surface Roughness on Lubrication Performance of Bump-Type Gas Foil Bearings

Taking bump-type gas foil bearings as the research object,a deformation model of bump foil and a thin-plate finite element model of top foil were proposed.By solving Reynolds equation and energy equation,the pressure distribution and the temperature distribution of gas films in foil bearings were obtained.Further,a numerical method for calculating the lubrication performance of gas foil bearings with considering the surface roughness was proposed.With a specific example,effects of the surface roughness on the bearing lubrication performance were parametrically studied.The results indicate that rougher journal surface can lead to larger fluctuation of the lubrication performance,while surface roughness of top foil has few effects on the fluctuation.Moreover,the mean values of performance parameters almost remain constant at different values of surface roughness.

Achieving oxidation protection effect for strips hot rolling via Al_(2)O_(3) nanofluid lubrication

It was discovered the application of Al_(2)O_(3) nanofluid as lubricant for steel hot rolling could synchronously achieve oxidation protection of strips surface.The underlying mechanism was investigated through hot rolling tests and molecular dynamics (MD) simulations.The employment of Al_(2)O_(3) nanoparticles contributed to significant enhancement in the lubrication performance of lubricant.The rolled strip exhibited the best surface topography that the roughness reached lowest with the sparsest surface defects.Besides,the oxide scale generated on steel surface was also thinner,and the ratio of Fe_(2)O_(3) among various iron oxides became lower.It was revealed the above oxidation protection effect of Al_(2)O_(3) nanofluid was attributed to the deposition of nanoparticles on metal surface during hot rolling.A protective layer in the thickness of about 193 nm was formed to prevent the direct contact between steel matrix and atmosphere,which was mainly composed of Al_(2)O_(3) and sintered organic molecules.MD simulations confirmed the diffusion of O_(2) and H_(2)O could be blocked by the Al_(2)O_(3) layer through physical absorption and penetration barrier effect.

Multifunctional Lubricant Additive Improves Lubrication and Antioxidation Properties of Tung Oil

It is of considerable significance to develop efficient and environmentally friendly machinery lubricant additives because of the increasing depletion of petrochemical resources and severe environmental problems.Herein,we proposed a facile strategy to synthesize a multifunctional vegetable oil-based lubricant via the lignin derivative vanillin coupled to amine and diethyl phosphite to produce a lubricating additive with both extreme pressure and antioxidant properties.Compared with pure tung oil,the lubricating and antioxidant performance of tung oil is significantly improved after adding additives.Adding the 1.0 wt%additive to the tung oil reduced the friction wear coefficient and the volume,and the oxidation induction time was much longer than pure tung oil.

Assessment of Lubrication Property and Machining Performance of Nanofluid Composite Electrostatic Spraying(NCES)Using Different Types of Vegetable Oils as Base Fluids of External Fluid

The current study of minimum quantity lubrication(MQL)concentrates on its performance improvement.By contrast with nanofluid MQL and electrostatic atomization(EA),the proposed nanofluid composite electrostatic spraying(NCES)can enhance the performance of MQL more comprehensively.However,it is largely influenced by the base fluid of external fluid.In this paper,the lubrication property and machining performance of NCES with different types of vegetable oils(castor,palm,soybean,rapeseed,and LB2000 oil)as the base fluids of external fluid were compared and evaluated by friction and milling tests under different flow ratios of external and internal fluids.The spraying current and electrowetting angle were tested to analyze the influence of vegetable oil type as the base fluid of external fluid on NCES performances.The friction test results show that relative to NCES with other vegetable oils as the base fluids of external fluid,NCES with LB2000 as the base fluid of external fluid reduced the friction coefficient and wear loss by 9.4%-27.7%and 7.6%-26.5%,respectively.The milling test results display that the milling force and milling temperature for NCES with LB2000 as the base fluid of external fluid were 1.4%-13.2%and 3.6%-11.2%lower than those for NCES with other vegetable oils as the base fluids of external fluid,respectively.When LB2000/multi-walled carbon nanotube(MWCNT)water-based nanofluid was used as the external/internal fluid and the flow ratio of external and internal fluids was 2:1,NCES showed the best milling performance.This study provides theoretical and technical support for the selection of the base fluid of NCES external fluid.

Simulation analysis of wear characteristics of connecting rod bearing bush based on improved mixed lubrication model

The failure rate of crankpin bearing bush of diesel engine under complex working conditions such as high temperature,dynamic load and variable speed is high.After serious wear,it is easy to deteriorate the stress state of connecting rod body and connecting rod bolt,resulting in serious accidents such as connecting rod fracture and body damage.Based on the mixed lubrication characteristics of connecting rod big endbearing shell of diesel engine under high explosion pressure impact load,an improved mixed lubrication mechanism model is established,which considers the influence of viscoelastic micro deformation of bearing bush material,integrates the full film lubrication model and dry friction model,couples dynamic equation of connecting rod.Then the actual lubrication state of big end bearing shell is simulated numerically.Further,the correctness of the theoretical research results is verified by fault simulation experiments.The results show that the high-frequency impact signal with fixed angle domain characteristics will be generated after the serious wear of bearing bush and the deterioration of lubrication state.The fault feature capture and alarm can be realized through the condition monitoring system,which can be applied to the fault monitoring of connecting rod bearing bush of diesel engine in the future.

Numerical Solution for Thermal Elastohydrodynamic Lubrication of Line Contact with Couple Stress Fluid as Lubricant

In this paper,the detailed analysis of the influence of thermal and non-Newtonian aspects of lubricant(couple stress fluid)on EHL line contact as a function of slide-roll ratio is presented.The novel low complexity FAS(full approximation scheme),of the multigrid scheme,with Jacobi dipole and Gauss Seidel relaxation is used for the solution of coupled equations viz.modified Reynolds equation,film thickness equation and energy equation satisfying appropriate boundary conditions.The analysis reveals the combined influence of non-Newtonian,thermal and slide-roll ratio(of bearing moving with different speeds)on pressure,film thickness and pressure spike covering a wide range of physical parameters of interest.Results show that pressure spike is strongly influenced by thermal,slide-roll ratio and non-Newtonian character of lubricant with negligible effect on the overall pressure distribution.Also,the minimum film thickness is slightly altered and it increases with the increase in the couple stress parameter.These findings confirm the importance of non-Newtonian and thermal effects in the study of EHL.

研华科技推出TPC-300-EHL系列低功耗物联网边缘可视化产品

2023年3月,工业计算平台提供商研华科技宣布推出TPC-300-EHL系列工业平板电脑,产品搭载英特尔面向物联网边缘计算平台推出的Elkhart Lake处理器,为物联网行业的用户提供具高效能低功耗的产品。

点接触弹流摩擦副动特性研究

弹流油膜具有显著的弹簧、阻尼特性,对高副机械零件和系统的动特性具有重要影响。研究弹流摩擦副的动特性,揭示弹流摩擦副动力学特性的变化规律,对改进和提升整个机械系统的动力学设计具有重要意义。基于弹流润滑理论和机械振动学,建立点接触弹流摩擦副的摩擦学-动力学耦合模型,采用数值方法求解弹流摩擦副在简谐激励下的振动响应;通过简谐激励下弹流摩擦副的阻尼环识别出弹流摩擦副的刚度和阻尼,用参数控制的方法研究载荷、速度、材料参数及椭圆度等对弹流摩擦副刚度和阻尼的影响。结果表明:在研究的速度和载荷范围内,摩擦副的刚度和阻尼随载荷和椭圆度的增大而增大,随速度和材料参数的增大而减小,其中载荷对点接触EHL摩擦副的刚度和阻尼的影响最为显著,相比阻尼,摩擦副的刚度随载荷、速度和材料参数的变化幅度要大得多。在数值算例的基础上,给出弹流摩擦副的刚度和阻尼关于载荷、速度和材料参数的拟合公式。数值比较结果表明,给出的拟合公式具有满意的精度,可快速计算弹流状态下点接触摩擦副的刚度和阻尼。

表面局部缺陷角接触球轴承弹流润滑性能研究

根据高速角接触球轴承自旋的运动特征,同时考虑轴承高速摩擦生热的影响,建立了表面具有局部缺陷的角接触球轴承弹流润滑模型。采用多重网格法获得弹流润滑各参数数值解,同时计算出轴承油膜刚度。研究了自旋、热效应和表面局部缺陷对球轴承弹流润滑性能的影响规律,计算结果表明:考虑自旋条件时,轴承的油膜厚度减小、压力增大,油膜刚度增大;随着轴承温度升高,轴承油膜厚度减小,油膜压力和油膜刚度增大;当润滑油流经轴承表面局部缺陷时,缺陷区域轴承润滑油油膜厚度增大,油膜压力减小,而非缺陷区域轴承最小油膜厚度减小,最大油膜压力增大,油膜刚度增大。

矩形沟槽结构参数对水润滑轴承润滑性能的影响

为了研究矩形沟槽结构参数对水润滑轴承弹流润滑性能的影响,建立水润滑轴承流固耦合(FSI)分析模型,采用有限元法,通过比对轴承周向水膜压力、最大水膜压力、摩擦系数、承载力、偏位角和轴承最大径向变形等参数,阐述了矩形沟槽结构参数对轴承润滑性能的变化规律。结果表明,沟槽宽度或深度越大的轴承,其承载性能越差。通过合理调整沟槽的宽深比,可以有效地改善轴承的润滑状态。在相同流水槽总断面积下,沟槽宽深比过大或过小均不是轴承弹流润滑的最好状态,沟槽宽度对轴承承载性能的影响要高于沟槽深度对轴承的影响。

利用SRV试验机研究温度对润滑剂摩擦学性能的影响

介绍了一种自行研究建立的测定润滑剂抗擦伤失效温度的试验方法,这是摩擦学领域性能评价的一个新发展。利用该试验方法评价了几种润滑剂摩擦因数随温度变化的情况并确定抗擦伤失效温度,对典型样品摩擦学性能随温度变化的情况进行了机理探讨,以期为相关润滑剂研发人员提供帮助和指导。

粗糙度和轴向运动对艉轴承混合润滑性能的影响

针对大型船舶航行过程中出现船体变形时艉轴承的磨损状态异常这一问题,本文探究磨损表面粗糙度变化和轴向运动对于艉轴承混合润滑性能的影响,建立了耦合轴向运动和表面粗糙度的混合润滑模型,通过数值模拟得到轴承润滑特征的分布,分析轴向运动和粗糙度对轴承混合润滑特性的影响,并对该润滑模型进行验证。计算结果表明:在轴向运动和轴颈倾斜耦合作用下,油膜厚度沿轴向方向非线性减小,油膜压力和接触压力在局部出现峰值,轴瓦在局部出现较大变形;轴向速度增加会加强动压润滑效应,轴向运动对润滑特性的影响程度随着倾角的增大而增加;粗糙度越大承载能力越强,同时接触情况越严重,会加速轴承的局部磨损。

聚(桐油-甲基丙烯酸甲酯)多功能润滑油添加剂的合成

以桐油(TO)、甲基丙烯酸甲酯(MMA)为原料,偶氮二异丁腈(AIBN)为引发剂,采用Schlenk装置合成了聚(桐油-甲基丙烯酸甲酯)(PTOM)共聚物。采用红外光谱(FT-IR)和核磁共振氢谱(1H NMR)表征了共聚物的结构,利用凝胶渗透色谱仪(GPC)测定了共聚物的相对分子质量及其多分散性指数,利用热重分析仪(TGA)测定了共聚物的热稳定性,并对共聚物的降凝、增黏和抗磨性能进行了评价。结果表明:当桐油与甲基丙烯酸甲酯质量比为1.5∶8.5、引发剂用量为1.0%(在单体中的质量分数)、反应温度为80℃、反应时间为6 h时,共聚物的收率较高(44.99%),其重均相对分子质量为28289。润滑油馏分(350~395℃)中添加质量分数0.8%的共聚物时,可将其凝点(T_(SP))降低6℃,将磨斑直径降低0.314 mm;添加质量分数0.5%的共聚物时,可将其黏度指数(VI)提高69。所合成的聚(桐油-甲基丙烯酸甲酯)可作为一种具有良好降凝、增黏和抗磨性能的多功能润滑油添加剂。

MoSe_(2)/石墨烯-不锈钢自润滑材料的减摩机理

为克服不锈钢摩擦副零件摩擦因数大、易磨损的不足,利用粉末冶金不锈钢基体贯通孔隙特征和异质结纳米润滑剂超滑效应,采用真空浸渍和水热合成两步法工艺制备出了MoSe_(2)/石墨烯-不锈钢自润滑材料,并对其摩擦学特性与减摩机理进行了研究。研究发现:摩擦过程中,加入到基体孔隙的MoSe_(2)/石墨烯异质结润滑剂在摩擦表面形成了均匀润滑膜,显著减小了摩擦副的摩擦因数和磨损率。在常温、载荷40 N、转速100 r/min工况下,MoSe_(2)/石墨烯-不锈钢自润滑材料的摩擦因数低至0.106,磨损率降至6.45×10^(-5)mm^(3)/(N·m),与不锈钢基体相比,其摩擦因数和磨损率分别降低了86%和93%。

石墨烯纳米颗粒润滑性能分子动力学分析

文中为了研究基础油液蓖麻油中加入石墨烯纳米颗粒后蓖麻油的润滑性能改变情况,运用分子动力学知识和LAMMPS仿真软件进行了粒子数密度、粒子径向分布势函数及热导率分析,同时探究了混合石墨烯的蓖麻油对切削加工后材料表面的形貌影响。仿真和试验结果表明:石墨烯纳米颗粒具有亲油性,蓖麻油分子在石墨烯周围呈层状分布,形成润滑油膜,此油膜具有良好的导热性和抗压性,以及良好的润滑效果,石墨烯的加入改善了蓖麻油的润滑性能。

分形粗糙面的主轴承弹流脂润滑分析

为探究弹性流体动压润滑(弹流润滑)状态下RV减速器主轴承接触表面之间的润滑特性,基于润滑脂的非牛顿特性以及粗糙表面分形理论,提出一种主轴承的点接触弹流脂润滑数值模型。首先,对该模型进行数值求解,得到脂膜压力、脂膜厚度的分布规律;然后,将其分别与其他点接触弹流润滑模型的数值结果和实验结果进行对比,验证了所建模型的正确性;最后,分析了主轴承表面光滑和粗糙状态下流变指数、分形维数、卷吸速度、载荷和润滑脂黏度对润滑性能的影响。结果表明:润滑脂的非牛顿性越明显,脂膜厚度越小且颈缩现象愈加不明显,接触区附近脂膜压力越符合赫兹压力分布,二次压力峰逐渐消失;考虑主轴承分形粗糙表面的弹流润滑特征更切合实际,增大分形维数,接触区真实接触面积增大,有利于降低脂膜压力,增加脂膜厚度;卷吸速度、载荷和润滑脂黏度对脂膜厚度分布的影响显著,对脂膜压力分布的影响较小;脂膜厚度以及最小膜厚越大,主轴承接触区脂膜不易破坏且越容易形成动压润滑。

医用介入导丝用疏水和亲水涂层的研究进展

医用介入导丝被广泛应用于各类介入手术,是目前经皮冠状动脉成形(PTCA)术及经皮血管成形术(PTA)中常用的医疗器械之一。在医用介入导丝表面添加亲水或疏水涂层,可以减小导丝在临床应用中的组织摩擦和组织损伤,有效提高导丝的通过性、抗菌性和生物相容性,减少炎症。综述了近年来国内外医用介入导丝亲水和疏水涂层材料,介绍了这些涂层的机理、附着力优化、抗菌修饰等方面内容,重点介绍了聚四氟乙烯、聚乙烯吡咯烷酮、聚丙烯酰胺、聚乙二醇、聚对二甲苯等涂层材料体系的研究进展,介绍了不同材料体系在医用导丝亲水和疏水涂层的作用机理和实际应用,同时介绍了亲疏水涂层的制备工艺,重点阐述了层层自组装、紫外光接枝、等离子体接枝和化学气相沉积等制备方法的可操作性、优势和劣势。最后在总结前人研究成果的基础上,对医用介入导丝涂层的现状及面临的问题进行了探讨,并对医用介入导丝涂层的发展方向及提高涂层综合性能等方面进行了展望。