Upconversion NaLuF4 nanoparticles were synthesized by the solvothermal method which could emit multicolor visible light under the excitation of 980 nm near-infrared (NIR) photons. These upconversion nanoparticles (UCN...Upconversion NaLuF4 nanoparticles were synthesized by the solvothermal method which could emit multicolor visible light under the excitation of 980 nm near-infrared (NIR) photons. These upconversion nanoparticles (UCNPs) with an acidic ligand could rapidly capture the basic rhodamine-B (RB) in plant cells to generate a close UCNPs@RB system. RB could efficiently absorb the green fluorescence from NaLuF4:18 mol.%Yb3+,2 mol.%Er3+ UCNPs and then emitted red light in the UCNPs@RB system by a robust luminescence resonance energy transfer (LRET) from UCNPs to RB. The detection limit of RB with these upconversion fluo-rescent nanoprobes could reach 0.25μg/cm3 in plant cell even under an ultra low excitation power source of 0.2 W/mm2. This LRET phenomenon was also extended to NaLuF4:18 mol.%Yb3+,0.5 mol.%Tm3+@Sodium fluorescein (SF) system. In addition, the differ-ential imaging could be achieved by successively incubating plant cells with fluorescent dyes and UCNPs. The fluorescent dyes ag-gregated in cell wall while UCNPs with surface modification distributed both in cell wall and cytoplasm, so that UCNPs@Dyes formed in cell walls which could emit multicolor light by LRET which was different from the emission in cytoplasm with only UCNPs.展开更多
Organic light-emitting diodes (OLEDs) have been extensively studied since the first efficient device based on small molecular luminescent materials was reported by Tang. Organic electroluminescent material, one of t...Organic light-emitting diodes (OLEDs) have been extensively studied since the first efficient device based on small molecular luminescent materials was reported by Tang. Organic electroluminescent material, one of the centerpieces of OLEDs, has been the focus of studies by many material scientists. To obtain high luminosity and to keep material costs low, a few remarkable design concepts have been developed. Aggregation-induced emission (AIE) materials were invented to overcome the common fluorescence-quenching problem, and cross-dipole stacking of fluorescent molecules was shown to be an effective method to get high solid-state luminescence. To exceed the limit of internal quantum efficiency of conventional fluorescent materials, phosphorescent materials were successfully applied in highly efficient electroluminescent devices. Most recently, delayed flu- orescent materials via reverse-intersystem crossing (RISC) from triplet to singlet and the "hot exciton" materials based on hy- bridized local and charge-transfer (HLCT) states were developed to he a new generation of low-cost luminescent materials as efficient as phosphorescent materials. In terms of the device-fabrication process, solution-processible small molecular lumi- nescent materials possess the advantages of high purity (vs. polymers) and low procession cost (vs. vacuum deposition), which are garnering them increasing attention. Herein, we review the progress of the development of small-molecule luminescent materials with different design concepts and features, and also briefly examine future development tendencies of luminescent materials.展开更多
Benefited from direct generation of circularly polarized(CP) emission with tunable colors, high efficiencies and facile device architectures, CP organic light-emitting diodes(CP-OLEDs) have attracted great attention a...Benefited from direct generation of circularly polarized(CP) emission with tunable colors, high efficiencies and facile device architectures, CP organic light-emitting diodes(CP-OLEDs) have attracted great attention and are expected to meet industrial applications. Particularly, CP electroluminescence(CPEL) originated from CP-OLEDs has wide potential applications in 3D displays, optical information storage, quantum communication, and biological sensors. The diverse design strategies of chiral luminescent materials for CP-OLEDs, including small organic emitters, lanthanide and transition-metal complexes and conjugated polymers, have been extensively explored. Helicene with twisted extended π-conjugated molecular structure could exhibit special helical chirality and excellent circularly polarized luminescence properties, which has been employed as the ingenious chirality core for constructing efficient chiral luminescent materials. In addition, significant improvements have been made in terms of CP photoluminescence research, however, the development of CPEL with more application prospects in optoelectronic technology still lags behind. In this review, we systematically summarize the recent advances in chiral luminescent materials based on helicene structure and their CPEL properties, including helicene-based chiral fluorescence molecules, transition metal complexes and thermally activated delayed fluorescence molecules, and discuss current challenges and future perspectives for this hot research field. We believe this progress report will provide a promising perspective of OLEDs based on helicene emitters with CPEL properties for extensive researchers, including chemical, physical and material scientists in different disciplinary fields and attract them to this rapidly developing field.展开更多
The transmission and distribution of moisture in cement-based materials are of great significance to the properties and durability of materials. Traditional macro-humidity monitoring equipment in civil engineering can...The transmission and distribution of moisture in cement-based materials are of great significance to the properties and durability of materials. Traditional macro-humidity monitoring equipment in civil engineering cannot capture the microscale humidity inside cement-based materials in situ. In this paper, a method of using rhodamine 6G fluorescence to characterize the change in relative humidity in cement-based materials is proposed. Two kinds of moulding processes are designed, which are premixed and smeared after moulding, and the optimal preparation concentration is explored. The results showed that rhodamine 6G can reflect the relative humidity of cement-based materials in situ by its fluorescence intensity and had little effect on the hydration heat release and hydration products of cement-based materials;the fluorescence intensity was much higher when the internal relative humidity was 63% and 75%. The research results lead the application of polymer materials in the field of traditional building materials, help to explore the performance evolution law of cement-based materials in micro scale, and have important significance for the evolution from single discipline to interdisciplinary.展开更多
Chirality is an important natural characteristic of organic molecules,and chiral organic molecules have shown extensive application in areas such as pharmaceutical development and material science.Benefiting from the ...Chirality is an important natural characteristic of organic molecules,and chiral organic molecules have shown extensive application in areas such as pharmaceutical development and material science.Benefiting from the ability to achieve circularly polarized luminescence(CPL),chiral luminescent materials have shown potential applications in anti-glare display,optical communication and,3D display,etc.Due to the ability to harvest both singlet and triplet excitons by a fast reverse intersystem crossing process without involving noble metals,chiral thermally activated delayed fluorescence(TADF)materials with point chirality,axial chirality,planar chirality and helical chirality are regarded as the state-of-the-art materials for circularly polarized organic light-emitting diodes(CP-OLEDs).In recent years,the chiral TADF materials and CP-OLEDs have rapidly developed,but unfortunately,the dissymmetry factors(g)are far from the requirement of practical applications.The ideal emitters and devices should have both high efficiency and a g factor,or at least a balance between these two elements.This review gives an overview of recent progress in chiral TADF materials,with a particular focus on the chiral skeleton,CPL property and device performance.Furthermore,the molecular design concept,device structure and methods to improve the g factors of chiral materials and CP-OLEDs are also discussed.展开更多
基金supported by the National Natural Science Foundation of China(21301058,61376076,61377024)the Scientific Research Fund of Hunan Provincial Education Department(14B060)Natural Science Foundation of Hunan Province(13JJ4048)
文摘Upconversion NaLuF4 nanoparticles were synthesized by the solvothermal method which could emit multicolor visible light under the excitation of 980 nm near-infrared (NIR) photons. These upconversion nanoparticles (UCNPs) with an acidic ligand could rapidly capture the basic rhodamine-B (RB) in plant cells to generate a close UCNPs@RB system. RB could efficiently absorb the green fluorescence from NaLuF4:18 mol.%Yb3+,2 mol.%Er3+ UCNPs and then emitted red light in the UCNPs@RB system by a robust luminescence resonance energy transfer (LRET) from UCNPs to RB. The detection limit of RB with these upconversion fluo-rescent nanoprobes could reach 0.25μg/cm3 in plant cell even under an ultra low excitation power source of 0.2 W/mm2. This LRET phenomenon was also extended to NaLuF4:18 mol.%Yb3+,0.5 mol.%Tm3+@Sodium fluorescein (SF) system. In addition, the differ-ential imaging could be achieved by successively incubating plant cells with fluorescent dyes and UCNPs. The fluorescent dyes ag-gregated in cell wall while UCNPs with surface modification distributed both in cell wall and cytoplasm, so that UCNPs@Dyes formed in cell walls which could emit multicolor light by LRET which was different from the emission in cytoplasm with only UCNPs.
基金supported by the National Natural Science Foundation of China(21334002,51303057,51373054,91233113)the National Basic Research Program of China(2013CB834705,2014CB643504,2015CB655003)+1 种基金the Fundamental Research Funds for the Central Universities(2013ZZ0001)the Introduced Innovative R&D Team of Guangdong(201101C0105067115)
文摘Organic light-emitting diodes (OLEDs) have been extensively studied since the first efficient device based on small molecular luminescent materials was reported by Tang. Organic electroluminescent material, one of the centerpieces of OLEDs, has been the focus of studies by many material scientists. To obtain high luminosity and to keep material costs low, a few remarkable design concepts have been developed. Aggregation-induced emission (AIE) materials were invented to overcome the common fluorescence-quenching problem, and cross-dipole stacking of fluorescent molecules was shown to be an effective method to get high solid-state luminescence. To exceed the limit of internal quantum efficiency of conventional fluorescent materials, phosphorescent materials were successfully applied in highly efficient electroluminescent devices. Most recently, delayed flu- orescent materials via reverse-intersystem crossing (RISC) from triplet to singlet and the "hot exciton" materials based on hy- bridized local and charge-transfer (HLCT) states were developed to he a new generation of low-cost luminescent materials as efficient as phosphorescent materials. In terms of the device-fabrication process, solution-processible small molecular lumi- nescent materials possess the advantages of high purity (vs. polymers) and low procession cost (vs. vacuum deposition), which are garnering them increasing attention. Herein, we review the progress of the development of small-molecule luminescent materials with different design concepts and features, and also briefly examine future development tendencies of luminescent materials.
基金National Natural Science Foundation of China(No.22005158)Program of High Level Talents(Nos.03083064 and JSSCBS20211122)Large Instruments Open Foundation of Nantong University.
文摘Benefited from direct generation of circularly polarized(CP) emission with tunable colors, high efficiencies and facile device architectures, CP organic light-emitting diodes(CP-OLEDs) have attracted great attention and are expected to meet industrial applications. Particularly, CP electroluminescence(CPEL) originated from CP-OLEDs has wide potential applications in 3D displays, optical information storage, quantum communication, and biological sensors. The diverse design strategies of chiral luminescent materials for CP-OLEDs, including small organic emitters, lanthanide and transition-metal complexes and conjugated polymers, have been extensively explored. Helicene with twisted extended π-conjugated molecular structure could exhibit special helical chirality and excellent circularly polarized luminescence properties, which has been employed as the ingenious chirality core for constructing efficient chiral luminescent materials. In addition, significant improvements have been made in terms of CP photoluminescence research, however, the development of CPEL with more application prospects in optoelectronic technology still lags behind. In this review, we systematically summarize the recent advances in chiral luminescent materials based on helicene structure and their CPEL properties, including helicene-based chiral fluorescence molecules, transition metal complexes and thermally activated delayed fluorescence molecules, and discuss current challenges and future perspectives for this hot research field. We believe this progress report will provide a promising perspective of OLEDs based on helicene emitters with CPEL properties for extensive researchers, including chemical, physical and material scientists in different disciplinary fields and attract them to this rapidly developing field.
基金Project(2018YFD1101002) supported by the National Key R&D Program of ChinaProject(51308405) supported by the National Natural Science Foundation of China。
文摘The transmission and distribution of moisture in cement-based materials are of great significance to the properties and durability of materials. Traditional macro-humidity monitoring equipment in civil engineering cannot capture the microscale humidity inside cement-based materials in situ. In this paper, a method of using rhodamine 6G fluorescence to characterize the change in relative humidity in cement-based materials is proposed. Two kinds of moulding processes are designed, which are premixed and smeared after moulding, and the optimal preparation concentration is explored. The results showed that rhodamine 6G can reflect the relative humidity of cement-based materials in situ by its fluorescence intensity and had little effect on the hydration heat release and hydration products of cement-based materials;the fluorescence intensity was much higher when the internal relative humidity was 63% and 75%. The research results lead the application of polymer materials in the field of traditional building materials, help to explore the performance evolution law of cement-based materials in micro scale, and have important significance for the evolution from single discipline to interdisciplinary.
基金supported by the National Natural Science Foundation of China(92256304,U23A20593)the Fundamental Research Funds for the Central Universities(020514380294)。
文摘Chirality is an important natural characteristic of organic molecules,and chiral organic molecules have shown extensive application in areas such as pharmaceutical development and material science.Benefiting from the ability to achieve circularly polarized luminescence(CPL),chiral luminescent materials have shown potential applications in anti-glare display,optical communication and,3D display,etc.Due to the ability to harvest both singlet and triplet excitons by a fast reverse intersystem crossing process without involving noble metals,chiral thermally activated delayed fluorescence(TADF)materials with point chirality,axial chirality,planar chirality and helical chirality are regarded as the state-of-the-art materials for circularly polarized organic light-emitting diodes(CP-OLEDs).In recent years,the chiral TADF materials and CP-OLEDs have rapidly developed,but unfortunately,the dissymmetry factors(g)are far from the requirement of practical applications.The ideal emitters and devices should have both high efficiency and a g factor,or at least a balance between these two elements.This review gives an overview of recent progress in chiral TADF materials,with a particular focus on the chiral skeleton,CPL property and device performance.Furthermore,the molecular design concept,device structure and methods to improve the g factors of chiral materials and CP-OLEDs are also discussed.