Simulation of anchor chain based on lumped mass method

In order to develop a anchoring operation simulation system and improve safety during anchoring operations,a relatively accurate mathematical model of anchoring operations needs to be established.In this paper,the stress condition of anchor chain under environmental and subsea geological conditions is further studied and the stress condition of anchor chain is analyzed based on the previous research.In this paper,a quasi-static model based on catenary method is used as the basis of dynamic analysis,and the dynamic model of anchor chain is established based on the concentrated mass method,which fully considers the influence of anchor chain weight,hydrodynamic force,ocean current and interaction with the seabed.The fourth-order Runge Kutta method was used to solve the model numerically,and a calculation procedure was developed.The accuracy of the model was verified by comparing the calculated results with the experimental results,indicating that the constructed anchor chain dynamics model has a high accuracy.

An insulated-gate bipolar transistor model based on the finite-volume charge method

A finite-volume charge method has been proposed to simulate PIN diodes and insulated-gate bipolar transistor(IGBT)devices using SPICE simulators by extending the lumped-charge method.The new method assumes local quasi-neutrality in the undepleted N^(-)base region and uses the total collector current,the nodal hole density and voltage as the basic quantities.In SPICE implementation,it makes clear and accurate definitions of three kinds of nodes—the carrier density nodes,the voltage nodes and the current generator nodes—in the undepleted N^(-)base region.It uses central finite difference to approximate electron and hole current generators and sets up the current continuity equation in a control volume for every carrier density node in the undepleted N^(-)base region.It is easy to increase the number of nodes to describe the fast spatially varying carrier density in transient processes.We use this method to simulate IGBT devices in SPICE simulators and get a good agreement with technology computer-aided design simulations.

Numerical simulation of the influences of sinker weight on the deformation and load of net of gravity sea cage in uniform flow

A numerical model for determining fishing net configuration and load is developed, based on the lumped masses method. The model is used to analyze the influences on the net of gravity sea cage by different sinker weights in uniform flow. The net of gravity sea cage is simulated under different current velocities and sinker weights. In order to verify the validity of the numerical results, model test results made by Lader and Enerhaug are cited and compared with the numerical ones. The results of numerical simulation agree well with the experimental ones and the agreement is within an error range of 13% under different velocities and sinker weights. The numerical results indicate that increasing the sinker weight can effectively reduce the net deformation, but the total drag force on the net will increase accordingly. Results will give references for better knowledge of the hydrodynamic behavior of gravity sea cage.

Global Analysis of a Flexible Riser

The mechanical performance of a flexible riser is more outstanding than other risers in violent environmental conditions. Based on the lumped mass method, a steep wave flexible riser configuration attached to a Floating Production Storage and Offioading （FPSO） has been applied to a global analysis in order to acquire the static and dynamic behavior of the flexible riser. The riser was divided into a series of straight massless line segments with a node at each end. Only the axial and torsional properties of the line were modeled, while the mass, weight, and buoyancy were all lumped to the nodes. Four different buoyancy module lengths have been made to demonstrate the importance of mode selection, so as to confirm the optimum buoyancy module length. The results in the sensitivity study show that the flexible riser is not very sensitive to the ocean current, and the buoyancy module can reduce the Von Mises stress and improve the mechanical performance of the flexible riser. Shorter buoyancy module length can reduce the riser effective tension in a specific range of the buoyancy module length when other parameters are constant, but it can also increase the maximum curvature of the riser. As a result, all kinds of the riser performances should be taken into account in order to select the most appropriate buoyancy module length.

Calculation and experimental study on heating temperature field of super-high strength aluminum alloy thick plate

Stepped heating treatment has been applied to aluminum alloy thick plate to improve the mechanical performance and corrosion resistance.Accurate temperature control of the plate is the difficulty in engineering application.The heating process,the calculation of surface heat transfer coefficient and the accurate temperature control method were studied based on measured heating temperature for the large-size thick plate.The results show that,the temperature difference between the surface and center of the thick plate is small.Based on the temperature uniformity,the surface heat transfer coefficient was calculated,and it is constant below300°C,but grows greatly over300°C.Consequently,a lumped parameter method(LPM)was developed to predict the plate temperature.A stepped solution treatment was designed by using LPM,and verified by finite element method(FEM)and experiments.Temperature curves calculated by LPM and FEM agree well with the experimental data,and the LPM is more convenient in engineering application.

Numerical Simulation of Dynamic Response of Supple Nets

A simulation method based on the lumped mass model is proposed for determining the dynamic behavior of nets exposed to a uniform current. Every mesh bar is modeled by a linear bar clement. The lumped mass point is set at the ends of each element. The net can be simulated by a discretized model consisting of many point masses and elements without mass. 3D shapes and the distribution of tensions of the net at different moments can be found from time integration of a set of motion equations with a computer program. Two nets are simulated according to reference experiments. Calculated results are in accordance with experimental results. The method is applicable and can be applied to improving design of, and research into other flexible structures, such as net cages.

Influence of Wave Direction on the Dynamic Response of A Submarine Equipment Launch and Recovery System

A launch and recovery system for a seafloor drill was studied using a dynamic model that considered the influences of seawater resistance and the elastic deformation of the cable based on the lumped mass method.The influence of wave direction angle on heave,roll,and pitch motions of the ship was analyzed,and those motion characteristics were then used to assess the tension response of the armored umbilical cable at the lifting point under different wave direction angles.By analyzing the different wave direction angles we found that,when a ship experiences longitudinal waves it will express longitudinal movement.When a ship encounters transverse waves,it will have transverse movement.Under oblique waves from bow or stern,a ship will have both longitudinal and transverse movement,exhibiting obvious heave and pitch movements.Oblique waves,in this study,produced the most obvious impact on armored umbilical cable tension.However,the tension of the armored umbilical cable will change based on the weight of the armored umbilical cable and the seafloor drill in the water.This analysis has provided a useful reference for the study of heave compensation and the constant tension automatic control.

Axial Vibration Analysis of the Mud Recovery Line on Deepwater Riserless Mud Recovery Drilling System

The series connection of multistage pumping module is the common concept of deepwater riserless mud recovery drilling system. In this system, the influence of the mass of pumping module on the vibration of mud recovery line cannot be ignored, and the lumped mass method has been utilized to discretize the mud recovery line. Based on the analysis of different boundary conditions, the paper establishes the axial forced vibration model of the mud recovery line considering the seawater damping, and the vibration model analysis provides the universal solution to the vibration model. An example of the two-stage pumping system has been used to analyze the dynamic response of mud recovery line under different excited frequencies. This paper has the important directive significance for the application of riserless mud recovery drilling technology in deepwater surface drilling.

Dynamic simulation and parametric influence analysis on thermal performance of a quartz tube solid particle receiver in solar tower power plants

Due to a higher operating temperature(≥800 ℃),Solar Particle Receiver(SPR)which uses particles as the working medium is considered as one of best candidates to improve the thermoelectric conversion efficiency of concentrating solar power plants.In this paper,a quartz tube solid particle receiver model is fully developed by using the discretized lumped parameter method,in which the calculation process of particle temperature and thermal loss is clearly given.In order to improve the manipulation level of particle receiver during the operation,the dynamic characteristics of the quartz tube particle receiver are comprehensively studied by the disturbance test of selected input parameters.Besides,in order to grasp the influence rule of key parameters on the thermal performance of particle receiver,the key parameters'sensitivity analysis is also deeply studied.The results show that the particle outlet temperature can reach as high as 810 ℃ under a relatively small value of solar flux 600 kW/m^(2),but the receiver efficiency is only about 75%;Besides,the receiver efficiency shows a variation tendency that it rises first falls afterwards with the increase of incident solar flux.The validity of proposed model is verified by a heating experi-mental system with a single quartz tube,and the relative error is not more than 7.9%.The research results are beneficial for understanding the dynamic characteristics and designing the particle receiver.

NUMERICAL SIMULATION OF THE EFFECTS OF WEIGHT SYSTEM ON THE HYDRODYNAMIC BEHAVIOR OF 3-D NET OF GRAVITY CAGE IN CURRENT

In this article, a model of 3-D net is set up by using lumped mass method. Model test results made by Lader and Enerhaug are cited to verify the numerical model. The aim of this paper is to investigate the effects of weight system on the hydrodynamic behavior of 3-D net of gravity cage in current. Using the 3-D net model, with different styles and masses of weight system, hydrodynamic behavior of gravity cage net in current is simulated. In this article, two styles of common weight system are used, which include： （1） sinker system , （2） bottom collar-sinker system. Under each style, three different masses of weight system are adopted. The numerical results indicate that the bottom collar-sinker system is practically feasible in improving the cage net volume deformation. Results of this study will give references for better knowledge of hydrodynamic behavior of gravity cage.

Lump Solution of (2+1)-Dimensional Boussinesq Equation

A class of lump solutions of(2+1)-dimensional Boussinesq equation are obtained with the help of Maple by using Hirota bilinear method.Some contour plots with different determinant values are sequentially made to show that the corresponding lump solution tends to zero when the determinant approaches zero.The particular lump solutions with specific values of the involved parameters are plotted,as illustrative examples.