Equivalent ways commonly used in engineering works are not effective to estimate the reliability of tandem system based on L-M method.One modified L-M method is an important means to estimate the reliability of CNC la...Equivalent ways commonly used in engineering works are not effective to estimate the reliability of tandem system based on L-M method.One modified L-M method is an important means to estimate the reliability of CNC lathes.A method of using two named confidence limits for the estimation is put forward.Fitting results of the sub-systems of CNC machine tools are estimated.And the scattered level of confidence limits facing the reliability matrix of sub-systems can be clearly seen.展开更多
Kernel adaptive filters(KAFs)have sparked substantial attraction for online non-linear learning applications.It is noted that the effectiveness of KAFs is highly reliant on a rational learning criterion.Concerning thi...Kernel adaptive filters(KAFs)have sparked substantial attraction for online non-linear learning applications.It is noted that the effectiveness of KAFs is highly reliant on a rational learning criterion.Concerning this,the logarithmic hyperbolic cosine(lncosh)criterion with better robustness and convergence has drawn attention in recent studies.However,existing lncosh loss-based KAFs use the stochastic gradient descent(SGD)for optimization,which lack a trade-off between the convergence speed and accuracy.But recursion-based KAFs can provide more effective filtering performance.Therefore,a Nyström method-based robust sparse kernel recursive least lncosh loss algorithm is derived in this article.Experiments via measures and synthetic data against the non-Gaussian noise confirm the superiority with regard to the robustness,accuracy performance,and computational cost.展开更多
M-type Ba hexaferrites were successfully synthesized by sol-gel method. Several synthesizing factors, such as pH value, citric acid/metal ion ratio, and dispersion agent were mainly discussed. Fine and pure powders of...M-type Ba hexaferrites were successfully synthesized by sol-gel method. Several synthesizing factors, such as pH value, citric acid/metal ion ratio, and dispersion agent were mainly discussed. Fine and pure powders of BaFe12O19 were optimally synthesized under the conditions of the pH value is 7 and citric acid/metal ion ratio is 3. The X-ray diffraction analysis demonstrates that no impurity is observed in the synthesized powders after presintered at 450 ℃ and calcinated at 1100 ℃. SEM observations indicate that the size of the synthesized BaFe12O19 powders is small and uniform distribution. It can also be learned from SEM that the co-synthesizing sol-gel method can be in favor of the formation of finer particles.展开更多
In the meizoseismal areas hit by the China Wenchuan earthquake on May 12, 2008, the disasterprone environment has changed dramatically, making the susceptibility assessment of debris flow more complex and uncertain. A...In the meizoseismal areas hit by the China Wenchuan earthquake on May 12, 2008, the disasterprone environment has changed dramatically, making the susceptibility assessment of debris flow more complex and uncertain. After the earthquake, debris flow hazards occurred frequently and effective susceptibility assessment of debris flow has become extremely important. Shenxi gully in Du Jiangyan city, located in the meizoseismal areas, was selected as the study area. Based on the research of disaster-prone environment and the main factors controlling debris flow, the susceptibility zonations of debris flow were mapped using factor weight method(FW), certainty coefficient method(CF) and geomorphic information entropy method(GI). Through comparative analysis, the study showed that these three methods underestimated susceptible degree of debris flow when used in the meizoseismal areas of Wenchuan earthquake. In order to solve this problem, this paper developed a modified certainty coefficient method(M-CF) to reflect the impact of rich loose materials on the susceptible degree of debris flow. In the modified method, the distribution and area of loose materials were obtained by field investigations and postearthquake remote sensing image, and four data sets, namely, lithology, elevation, slop and aspect, wereused to calculate the CF values. The result of M-CF method is in agreement with field investigations and the accuracy of the method is satisfied. The method has a wide application to the susceptibility assessment of debris flow in the earthquake stricken areas.展开更多
In this paper, we present m time secant like multi projection algorithm for sparse unconstrained minimization problem. We prove this method are all q superlinearly convergent to the solution about m≥1 . At last, we f...In this paper, we present m time secant like multi projection algorithm for sparse unconstrained minimization problem. We prove this method are all q superlinearly convergent to the solution about m≥1 . At last, we from some numerical results, discuss how to choose the number m to determine the approximating matrix properly in practical use.展开更多
In this paper, a modified Newton type iterative method is considered for ap- proximately solving ill-posed nonlinear operator equations involving m-accretive mappings in Banach space. Convergence rate of the method is...In this paper, a modified Newton type iterative method is considered for ap- proximately solving ill-posed nonlinear operator equations involving m-accretive mappings in Banach space. Convergence rate of the method is obtained based on an a priori choice of the regularization parameter. Our analysis is not based on the sequential continuity of the normalized duality mapping.展开更多
基金Sponsored by the National Natural Science Foundation of China(Grant No.40774048)
文摘Equivalent ways commonly used in engineering works are not effective to estimate the reliability of tandem system based on L-M method.One modified L-M method is an important means to estimate the reliability of CNC lathes.A method of using two named confidence limits for the estimation is put forward.Fitting results of the sub-systems of CNC machine tools are estimated.And the scattered level of confidence limits facing the reliability matrix of sub-systems can be clearly seen.
基金supported in part by the National Natural Science Foundation of China under Grants No.62027803,No.61601096,No.61971111,and No.61801089in part by the Science and Technology Program under Grants No.8091C24,No.2021JCJQJJ0949,and No.2022JCJQJJ0784in part by the Industrial Technology Development Program under Grant No.2020110C041.
文摘Kernel adaptive filters(KAFs)have sparked substantial attraction for online non-linear learning applications.It is noted that the effectiveness of KAFs is highly reliant on a rational learning criterion.Concerning this,the logarithmic hyperbolic cosine(lncosh)criterion with better robustness and convergence has drawn attention in recent studies.However,existing lncosh loss-based KAFs use the stochastic gradient descent(SGD)for optimization,which lack a trade-off between the convergence speed and accuracy.But recursion-based KAFs can provide more effective filtering performance.Therefore,a Nyström method-based robust sparse kernel recursive least lncosh loss algorithm is derived in this article.Experiments via measures and synthetic data against the non-Gaussian noise confirm the superiority with regard to the robustness,accuracy performance,and computational cost.
基金This work was financially supported by the Funds for Harbin Young Scholars (No.2005AFQXJ031).
文摘M-type Ba hexaferrites were successfully synthesized by sol-gel method. Several synthesizing factors, such as pH value, citric acid/metal ion ratio, and dispersion agent were mainly discussed. Fine and pure powders of BaFe12O19 were optimally synthesized under the conditions of the pH value is 7 and citric acid/metal ion ratio is 3. The X-ray diffraction analysis demonstrates that no impurity is observed in the synthesized powders after presintered at 450 ℃ and calcinated at 1100 ℃. SEM observations indicate that the size of the synthesized BaFe12O19 powders is small and uniform distribution. It can also be learned from SEM that the co-synthesizing sol-gel method can be in favor of the formation of finer particles.
基金Financial support was provided by Ministry of Water Resources welfare industry funding(Grant No.201301058)Key Laboratory of Mountain Hazards and Earth Surface Processes independent project funding:Dynamic process and buried risk of debris flow in Shenxi gully after Wenchuan earthquakethe international cooperation project of Ministry of Science and Technology(Grant No.2013DFA21720)
文摘In the meizoseismal areas hit by the China Wenchuan earthquake on May 12, 2008, the disasterprone environment has changed dramatically, making the susceptibility assessment of debris flow more complex and uncertain. After the earthquake, debris flow hazards occurred frequently and effective susceptibility assessment of debris flow has become extremely important. Shenxi gully in Du Jiangyan city, located in the meizoseismal areas, was selected as the study area. Based on the research of disaster-prone environment and the main factors controlling debris flow, the susceptibility zonations of debris flow were mapped using factor weight method(FW), certainty coefficient method(CF) and geomorphic information entropy method(GI). Through comparative analysis, the study showed that these three methods underestimated susceptible degree of debris flow when used in the meizoseismal areas of Wenchuan earthquake. In order to solve this problem, this paper developed a modified certainty coefficient method(M-CF) to reflect the impact of rich loose materials on the susceptible degree of debris flow. In the modified method, the distribution and area of loose materials were obtained by field investigations and postearthquake remote sensing image, and four data sets, namely, lithology, elevation, slop and aspect, wereused to calculate the CF values. The result of M-CF method is in agreement with field investigations and the accuracy of the method is satisfied. The method has a wide application to the susceptibility assessment of debris flow in the earthquake stricken areas.
文摘In this paper, we present m time secant like multi projection algorithm for sparse unconstrained minimization problem. We prove this method are all q superlinearly convergent to the solution about m≥1 . At last, we from some numerical results, discuss how to choose the number m to determine the approximating matrix properly in practical use.
文摘In this paper, a modified Newton type iterative method is considered for ap- proximately solving ill-posed nonlinear operator equations involving m-accretive mappings in Banach space. Convergence rate of the method is obtained based on an a priori choice of the regularization parameter. Our analysis is not based on the sequential continuity of the normalized duality mapping.