期刊文献+
共找到1,057篇文章
< 1 2 53 >
每页显示 20 50 100
FANUC-0i系统宏程序在车削非圆曲线轮廓中的应用
1
作者 于长有 张丽 《机械工程与自动化》 2023年第1期192-194,共3页
宏程序具有程序短小、编程灵活、加工效率高等优点。以抛物线轮廓的车削加工为例,介绍了FANUC-0i系统宏程序二次非圆曲线的编程思路和方法,并通过仿真软件校验程序的正确性,验证了宏程序在一些特定场合加工中的优越性。
关键词 车削加工 宏程序 抛物线 FANUC-0i系统
下载PDF
Pivotal role of long non-coding ribonucleic acid-X-inactive specific transcript in regulating immune checkpoint programmed death ligand 1 through a shared pathway between miR-194-5p and miR-155-5p in hepatocellular carcinoma 被引量:9
2
作者 Sara M Atwa Heba Handoussa +2 位作者 Karim M Hosny Margarete Odenthal Hend M El Tayebi 《World Journal of Hepatology》 2020年第12期1211-1227,共17页
BACKGROUND Anti-programmed death therapy has thrust immunotherapy into the spotlight.However,such therapy has a modest response in hepatocellular carcinoma(HCC).Epigenetic immunomodulation is a suggestive combinatoria... BACKGROUND Anti-programmed death therapy has thrust immunotherapy into the spotlight.However,such therapy has a modest response in hepatocellular carcinoma(HCC).Epigenetic immunomodulation is a suggestive combinatorial therapy with immune checkpoint blockade.Non-coding ribonucleic acid(ncRNA)driven regulation is a major mechanism of epigenetic modulation.Given the wide range of ncRNAs that co-opt in programmed cell-death protein 1(PD-1)/programmed death ligand 1(PD-L1)regulation,and based on the literature,we hypothesized that miR-155-5p,miR-194-5p and long non-coding RNAs(lncRNAs)X-inactive specific transcript(XIST)and MALAT-1 are involved in a regulatory upstream pathway for PD-1/PD-L1.Recently,nutraceutical therapeutics in cancers have received increasing attention.Thus,it is interesting to study the impact of oleuropein on the respective study key players.AIM To explore potential upstream regulatory ncRNAs for the immune checkpoint PD-1/PD-L1.METHODS Bioinformatics tools including microrna.org and lnCeDB software were adopted to detect targeting of miR-155-5p,miR-194-5p and lncRNAs XIST and MALAT-1 to PD-L1 mRNA,respectively.In addition,Diana tool was used to predict targeting of both aforementioned miRNAs to lncRNAs XIST and MALAT-1.HCC and normal tissue samples were collected for scanning of PD-L1,XIST and MALAT-1 expression.To study the interaction among miR-155-5p,miR-194-5p,lncRNAs XIST and MALAT-1,as well as PD-L1 mRNA,a series of transfections of the Huh-7 cell line was carried out.RESULTS Bioinformatics software predicted that miR-155-5p and miR-194-5p can target PDL1,MALAT-1 and XIST.MALAT-1 and XIST were predicted to target PD-L1 mRNA.PD-L1 and XIST were significantly upregulated in 23 HCC biopsies compared to healthy controls;however,MALAT-1 was barely detected.MiR-194 induced expression elevated the expression of PD-L1,XIST and MALAT-1.However,overexpression of miR-155-5p induced the upregulation of PD-L1 and XIST,while it had a negative impact on MALAT-1 expression.Knockdown of XIST did have an impact on PD-L1 expression;however,following knockdown of the negative regulator of X-inactive specific transcript(TSIX),PD-L1 expression was elevated,and abolished MALAT-1 activity.Upon co-transfection of miR-194-5p with siMALAT-1,PD-L1 expression was elevated.Co-transfection of miR-194-5p with siXIST did not have an impact on PD-L1 expression.Upon co-transfection of miR-194 with siTSIX,PD-L1 expression was upregulated.Interestingly,the same PD-L1 expression pattern was observed following miR-155-5p cotransfections.Oleuropein treatment of Huh-7 cells reduced the expression profile of PD-L1,XIST,and miR-155-5p,upregulated the expression of miR-194-5p and had no significant impact on the MALAT-1 expression profile.CONCLUSION This study reported a novel finding revealing that opposing acting miRNAs in HCC,have the same impact on PD-1/PD-L1 immune checkpoint by sharing a common signaling pathway. 展开更多
关键词 Hepatocellular carcinoma X-inactive specific transcript MiR-155-5p MiR-194-5p programmed cell-death protein 1/programmed death ligand 1 Immune checkpoint
下载PDF
Global optimality conditions for quadratic 0-1 programming with inequality constraints 被引量:1
3
作者 张连生 陈伟 姚奕荣 《Journal of Shanghai University(English Edition)》 CAS 2010年第2期150-154,共5页
Quadratic 0-1 problems with linear inequality constraints are briefly considered in this paper.Global optimality conditions for these problems,including a necessary condition and some sufficient conditions,are present... Quadratic 0-1 problems with linear inequality constraints are briefly considered in this paper.Global optimality conditions for these problems,including a necessary condition and some sufficient conditions,are presented.The necessary condition is expressed without dual variables.The relations between the global optimal solutions of nonconvex quadratic 0-1 problems and the associated relaxed convex problems are also studied. 展开更多
关键词 quadratic 0-1 programming optimality condition nonconvex optimization integer programming convex duality
下载PDF
A Tabu Search Algorithm for Quadratic 0-1 Programming Problem 被引量:2
4
作者 周贤伟 王远允 +1 位作者 田新现 郭瑞强 《Chinese Quarterly Journal of Mathematics》 CSCD 1997年第4期98-102, ,共5页
In this paper,quadratic 0-1 programming problem (I) is considered, in terms of its features quadratic 0-1 programming problem is solved by linear approxity heurstic algrothm and a developed tabu search ahgrothm .
关键词 Tabu search linear approximate quaratic 0-1 programming
下载PDF
Verifying the Effects of an Education Program Leveraging Information Technology to Promote Cervical Cancer Screening in Women Aged 20 - 29—A One-Year Longitudinal Study
5
作者 Nakamura Tomoko Sasaki Ayako 《Health》 2020年第11期1526-1542,共17页
The purpose of this research is to implement an IT-based education program in order to promote cervical cancer screenings for women aged 20 - 29 years, as well as to examine the results of said program. This is a long... The purpose of this research is to implement an IT-based education program in order to promote cervical cancer screenings for women aged 20 - 29 years, as well as to examine the results of said program. This is a longitudinal/comparative study of two groups, one for which the program was implemented (the intervention group), and the other for which it was not (the control group). The program consisted of attending a health lecture and encouragement to be screened one month, six months, and one year later sent through IT-based methods. The target was unmarried women aged 20 - 29 who had neither previously given birth nor had been screened for cervical cancer in a period one year prior. They were divided into two groups, the intervention group (n = 142) and control group (n = 145). The effectiveness of the program was assessed via an initial survey and further surveys six months and one year later. Results were based on the Japanese version of the Health Belief Model Scale for Cervical Cancer and the Pap Smear Test (HBMSCCPST), knowledge scores in the categories of Healthy Lifestyles, Cervical Cancer, Cervical Cancer Screening, and screening behavior. A two-way ANOVA of the HBMSCCPST subscales and knowledge scores in the initial, six-month, and one-year surveys was performed, showing interaction in Cervical Cancer (p = 0.00). Main effects were observed in Cervical Cancer Screening (p = 0.00) and Healthy Lifestyles (p = 0.00). Regarding the amount of change from the initial survey, knowledge scores in the Cervical Cancer (p = 0.027) and Cervical Cancer Screening (p = 0.016) categories were significantly higher in the intervention group than in the control group. There was no significant difference in cervical cancer screening rates (p = 0.26) between the two groups. However, a small-degree effect size was observed for Benefits, Seriousness, and Susceptibility subscales in both examinees and non-examinees. Although the educational program of this study was effective in improving the knowledge of women in their twenties, there was little improvement in HBMSCCPST and it did not lead to the promotion of cervical cancer screening. In order to raise interest in cervical cancer screening, it is necessary to consider useful content to guide women to consult with healthcare professionals, a long-term population approach, and organizational structure of consultation. 展开更多
关键词 Cervical Cancer Screening Age 20 - 29 Educational program INFORMATION Technology
下载PDF
Program of International Conference on Data-driven Discovery: When Data Science Meets Information Science(June 19-22, 2016, Beijing, China)
6
《Journal of Data and Information Science》 2016年第2期92-94,共3页
关键词 When Data Science Meets Information Science program of International Conference on Data-driven Discovery June 19-22 BEIJING China
下载PDF
Nondifferentiable Multiobjective Programming under Generalized d_I-G-Type I Invexity
7
作者 闫春雷 《Journal of Donghua University(English Edition)》 EI CAS 2013年第4期293-297,共5页
To relax convexity assumptions imposed on the functions in theorems on sufficient conditions and duality,new concepts of generalized dI-G-type Ⅰ invexity were introduced for nondifferentiable multiobjective programmi... To relax convexity assumptions imposed on the functions in theorems on sufficient conditions and duality,new concepts of generalized dI-G-type Ⅰ invexity were introduced for nondifferentiable multiobjective programming problems.Based upon these generalized invexity,G-Fritz-John (G-F-J) and G-Karnsh-Kuhn-Tucker (G-K-K-T) types sufficient optimality conditions were established for a feasible solution to be an efficient solution.Moreover,weak and strict duality results were derived for a G-Mond-Weir type dual under various types of generalized dI-G-type Ⅰ invexity assumptions. 展开更多
关键词 nondifferentiable multiobjective program efficient solution generalized dI-G-type invexity sufficient optimality conditions dualityCLC number:O221.6Document code:AArticle ID:1672-5220(2013)04-0293-05
下载PDF
The Develoyment Program of Energy Conservation and Comprehensive Utilization 2005-2007
8
《China Standardization》 2006年第4期9-10,共2页
Jointly published by 14 Department headed by Standardization Administraion ofChina(SAC) Subtitle: China will formulate and reformulate 926 standards for energy conservation andcomprehensive u-tilization during 2005 an... Jointly published by 14 Department headed by Standardization Administraion ofChina(SAC) Subtitle: China will formulate and reformulate 926 standards for energy conservation andcomprehensive u-tilization during 2005 and 2007. In the past few days, 14 departments jointlypublished the Development Program of Energy Conservation and Comprehensive Utilization 2005-2007,(Program for short). They are Standardization Administration of China, National Development andReform Commission, Ministry of Land and Resources, Ministry of Establishment, Ministry ofCommunications, Ministry of Information Industry, Ministry of Waster Resources, Ministry ofAgriculture, Ministry of Commerce, General Administration of Quality Supervision, Inspection andQuarantine of the PRC, State Environmental Protection Administration, State Forestry Bureau, StateOceanic Administration and China Meteorological Bureau. 展开更多
关键词 PRO The Develoyment program of Energy Conservation and Comprehensive Utilization 2005-2007
下载PDF
闭环制造中兼容STEP-NC的在机测量系统应用研究 被引量:3
9
作者 雷沛 郑联语 徐景亮 《计算机集成制造系统》 EI CSCD 北大核心 2013年第5期1025-1034,共10页
针对闭环制造对测量任务执行及时性和测量结果集成性的要求,提出兼容STEP-NC的在机测量系统。参考支持闭环制造的相关信息模型(STEP-NC和先进集成数学系统)建立了在机测量系统的信息模型。在此基础上提出分层的在机测量工艺规划技术,利... 针对闭环制造对测量任务执行及时性和测量结果集成性的要求,提出兼容STEP-NC的在机测量系统。参考支持闭环制造的相关信息模型(STEP-NC和先进集成数学系统)建立了在机测量系统的信息模型。在此基础上提出分层的在机测量工艺规划技术,利用面向对象的宏程序实现了工艺规划信息的后置处理,采用多线程方式实现了测量程序执行和测量数据反馈的并行处理,并对测量项和测量点进行统一标志,从而保证了测量数据与设计模型关联的可靠性。在CATIA平台上开发了原型系统,并通过一个飞机零件验证了所建立的系统及其技术的有效性和可用性。 展开更多
关键词 闭环制造 在机测量 STEP-NC标准 先进集成数学系统 宏程序 信息集成
下载PDF
基于HNC-21T的高精度椭圆内表面加工方法 被引量:2
10
作者 严瑞强 肖善华 +2 位作者 楚功 门延会 甘露 《煤矿机械》 北大核心 2018年第12期78-80,共3页
根据椭圆曲线数学模型,采用对比分析法,编制了直线逼近椭圆内表面粗加工宏程序和圆弧逼近椭圆内表面精加工宏程序,并在HNC-21T数控车床上加工证明:该方法有效解决了某企业零件椭圆内表面加工精度不高的问题,使该零件椭圆内表面加工的尺... 根据椭圆曲线数学模型,采用对比分析法,编制了直线逼近椭圆内表面粗加工宏程序和圆弧逼近椭圆内表面精加工宏程序,并在HNC-21T数控车床上加工证明:该方法有效解决了某企业零件椭圆内表面加工精度不高的问题,使该零件椭圆内表面加工的尺寸精度由62μm提高到16μm,表面粗糙度达0.4μm,具有一定的工程实用价值。 展开更多
关键词 高精度 椭圆内表面 宏程序 圆弧逼近
下载PDF
基于FANUC-0TF数控系统的三点圆弧插补指令开发 被引量:2
11
作者 李柯 胡自化 +1 位作者 杨世平 漆瑞 《新技术新工艺》 北大核心 2003年第6期6-9,共4页
介绍了利用 FANUC- 0 TF数控系统的宏程序开发三点圆弧插补指令的基本过程。通过加工实例表明该指令正确可靠 ,完全可与标准圆弧插补指令 ( G0 2 /G0 3)等效 ,从而拓展了第
关键词 数控系统 三点圆弧插补 宏程序 二次开发 G02/G03
下载PDF
基于端面槽加工的HNC-21T系统宏指令应用研究 被引量:5
12
作者 汪荣青 《煤矿机械》 北大核心 2012年第11期136-138,共3页
利用宏程序中变量的运算、控制功能,把端面槽的槽宽、槽深、端面槽小径、端面槽大径等参数编入到各个变量中,通过运算和控制,能够更加符合实际切削过程中端面槽的编程要求。根据端面槽加工工艺的不同,端面槽加工分为直进式和回绕式2种,... 利用宏程序中变量的运算、控制功能,把端面槽的槽宽、槽深、端面槽小径、端面槽大径等参数编入到各个变量中,通过运算和控制,能够更加符合实际切削过程中端面槽的编程要求。根据端面槽加工工艺的不同,端面槽加工分为直进式和回绕式2种,例举了这2种端面槽编程模板。编程思路灵活,精度易于参数化控制,应用于实践加工过程中。 展开更多
关键词 宏程序 端面槽零件 参数化 变量
下载PDF
基于宏程序的数控车削非圆曲线的刀具轨迹拟合研究 被引量:1
13
作者 闫宫君 米保全 +1 位作者 武承文 李红梅 《机械管理开发》 2024年第3期105-107,124,共4页
通过对比分析几种非圆曲线车削方法的功能特定,分析确定宏程序车削加工非圆曲线零件的应用优势,并结合车削复合循环指令编程思路以抛物线、椭圆曲线组合零件车削加工为例,进行数控仿真加工实验。实验验证了编程程序的可行性,同时编程过... 通过对比分析几种非圆曲线车削方法的功能特定,分析确定宏程序车削加工非圆曲线零件的应用优势,并结合车削复合循环指令编程思路以抛物线、椭圆曲线组合零件车削加工为例,进行数控仿真加工实验。实验验证了编程程序的可行性,同时编程过程的简便快捷以及参数指令可手动修改替换的特点,也为类似复杂类零件轮廓车削加工提供了借鉴。 展开更多
关键词 宏程序 非圆曲线 刀具轨迹拟合 车削加工
下载PDF
液压支架立柱导向套大螺距梯形螺纹加工的研究与实践
14
作者 杨贵 欧艳梅 《煤矿机械》 2024年第3期99-102,共4页
对于大螺距的梯形螺纹加工中一般利用宏程序指令编程,但在编程时计算量比较大,容易出错,通过反复实践和研究,多重螺纹切削循环G76指令由于编程指令简单明了、加工效率高,在企业生产线应用比较广泛。利用G76指令进行切削量恒定的错齿切削... 对于大螺距的梯形螺纹加工中一般利用宏程序指令编程,但在编程时计算量比较大,容易出错,通过反复实践和研究,多重螺纹切削循环G76指令由于编程指令简单明了、加工效率高,在企业生产线应用比较广泛。利用G76指令进行切削量恒定的错齿切削,解决了大螺距梯形螺纹加工中出现的崩刃、扎刀问题,顺利地完成了加工任务。 展开更多
关键词 多重螺纹切削循环G76 宏程序 大螺距 梯形螺纹
下载PDF
FANUC 0i-MB系统变半径补偿宏程序及其嵌套的应用 被引量:2
15
作者 高天友 《现代制造工程》 CSCD 2007年第6期32-33,53,共3页
通过对实例的剖析,阐述FANUC 0i数控系统变半径补偿宏程序及其嵌套应用的方法。
关键词 宏程序 直线插补 嵌套 变半径补偿
下载PDF
应用VB实现AGA8-92DC气体压缩因子计算方法 被引量:4
16
作者 梁光川 左果 +1 位作者 文雯 彭蕾 《辽宁化工》 CAS 2014年第5期609-612,共4页
天然气压缩因子在天然气工程计算中具有重要的地位,其计算方法有多种,其中就包括由美国燃气协会提出的基于气体组成来计算压缩因子的AGA8-92DC方程。根据GB/T 17747.2-2011标准所给出的AGA8-92DC方法计算过程,用Visual Basic6.0 progra... 天然气压缩因子在天然气工程计算中具有重要的地位,其计算方法有多种,其中就包括由美国燃气协会提出的基于气体组成来计算压缩因子的AGA8-92DC方程。根据GB/T 17747.2-2011标准所给出的AGA8-92DC方法计算过程,用Visual Basic6.0 program编写了计算程序。为了验证程序的正确性,分别将程序计算值与GB/T 17747.2标准提供的计算值和含碳贫气气样实测值进行了对比,且获得了较小的计算误差。由计算值与实测值的对比结果可知,通过Visual Basic6.0 program所编写的AGA8-92DC方法计算程序而得到的计算结果能够满足工程上的要求;对于中高压含碳贫气,AGA8-92DC方法具有较高的计算准确度;当气体温度升高时,AGA8-92DC方法的计算误差将有所减小。 展开更多
关键词 天然气压缩因子 AGA8-92DC方程 VISUAL Basic6 0 program 含碳贫气 计算误差
下载PDF
基于零件族的数控编程实例
17
作者 方振红 方春华 +2 位作者 孙健 周德民 张伟 《机械工程师》 2024年第3期77-79,84,共4页
成组技术与数控技术都能提高多品种小批量零件的生产效率。针对归并成组的零件族进行编程,能减少重复劳动、提高生产效率。基于零件族编程可采用自动编程和手工宏程序两种方式。基于零件族的CAM编程,UG软件可采用部件族工具和加工模板... 成组技术与数控技术都能提高多品种小批量零件的生产效率。针对归并成组的零件族进行编程,能减少重复劳动、提高生产效率。基于零件族编程可采用自动编程和手工宏程序两种方式。基于零件族的CAM编程,UG软件可采用部件族工具和加工模板定制两种途径。宏程序可克服CAM软件无法共享程序的缺陷,是零件族特征编程的无二选择。 展开更多
关键词 零件族 成组技术 数控编程 UG 加工模板 宏程序
下载PDF
梯形螺纹的数控车削难点及解决方案
18
作者 郭建平 《新技术新工艺》 2024年第7期13-17,共5页
在数控车床上加工大螺距的梯形螺纹难度较大,主要体现在“扎刀”现象、程序的编制和精度的技术保证。针对梯形螺纹的这些难点,通过具体实例,从进刀方法、刀具的选择、宏程序的编制、尺寸精度技术控制等方面详细论述了大螺距梯形螺纹在... 在数控车床上加工大螺距的梯形螺纹难度较大,主要体现在“扎刀”现象、程序的编制和精度的技术保证。针对梯形螺纹的这些难点,通过具体实例,从进刀方法、刀具的选择、宏程序的编制、尺寸精度技术控制等方面详细论述了大螺距梯形螺纹在数控车床上的车削技术方法,从而解决了上述问题,有效地保证了加工质量,提高了加工效率。宏程序编制简单实用,可作为大螺距梯形螺纹或蜗杆零件的通用模版。 展开更多
关键词 梯形螺纹 数控车削 宏程序 指令 进刀 精车
下载PDF
基于FANUC系统3轴数控铣床刀具控制系统升级及诊断系统优化研究
19
作者 林春宇 《模具制造》 2024年第9期29-31,34,共4页
通过引入宏程序、自动换刀功能和对刀补偿,实现单个零件多工序加工,提升精度和效率,减少操作员工作量,降低误差,建立规范操作流程,提高生产效率和品控水平,增进经济效益。部分数控铣床系统报警简单,通过增加PMC诊断系统,快速定位和解决... 通过引入宏程序、自动换刀功能和对刀补偿,实现单个零件多工序加工,提升精度和效率,减少操作员工作量,降低误差,建立规范操作流程,提高生产效率和品控水平,增进经济效益。部分数控铣床系统报警简单,通过增加PMC诊断系统,快速定位和解决故障,确保铣床正常运行,降低维护成本。优化后的数控铣床提高资源利用率,提升产品品质,实现经济效益提升。 展开更多
关键词 FANUC系统 刀具控制 诊断系统 宏程序
下载PDF
基于华中数控系统(HNC-21/22T)变导程螺纹宏程序的开发 被引量:1
20
作者 高晓东 《机床与液压》 北大核心 2012年第20期53-54,58,共3页
变导程螺纹的应用非常广泛。根据华中世纪星数控系统特点,开发变导程螺纹的宏程序,以解决用数控车床加工变导程螺纹的难题,提高生产效率和加工质量。
关键词 华中世纪星数控系统 变导程螺纹 宏程序开发
下载PDF
上一页 1 2 53 下一页 到第
使用帮助 返回顶部