The adsorption effects of several macroporousadsorption resins for gibberellic acid (GA3) were investigated.The dynamic adsorption capacity is 58.38 mg/g drybeads for resin R4 and 96.46 mg/g dry beads for resin R5whic...The adsorption effects of several macroporousadsorption resins for gibberellic acid (GA3) were investigated.The dynamic adsorption capacity is 58.38 mg/g drybeads for resin R4 and 96.46 mg/g dry beads for resin R5which is consistent with the surface area. Aqueous methanol(50%, V/V) is a good eluent and the yield of GA3 isabove 95%. The concentration of GA3 could increase fivefoldafter an adsorption-elution cycle and this is importantwhen considering further crystallization of GA3 in anindustrial process.展开更多
The adsorption behaviors and mechanism of a novel chelate resin, macroporous phosphonic acid resin(PAR)for Gd(Ⅲ)were investigated. The statically and dynamically saturated adsorption capacity is respectively 308 mg&#...The adsorption behaviors and mechanism of a novel chelate resin, macroporous phosphonic acid resin(PAR)for Gd(Ⅲ)were investigated. The statically and dynamically saturated adsorption capacity is respectively 308 mg·g^(-1)resin and 296 mg·g^(-1)resin at 298 K in HAc-NaAc medium at pH 5.6. Gd(Ⅲ)adsorbed on PAR can be reductively eluted by 0.5～5.0 mol·L^(-1) HCl used as eluant and the elution percentage is up to 94.7% in 1.0 mol·L^(-1) HCl. The resin can be regenerated and reused without apparent decrease in adsorption capacity. The apparent adsorption rate constant is k_(298)=3.96×10^(-5) s^(-1). The adsorption behavior of PAR for Gd(Ⅲ) conforms to the Freundlich isotherm. The thermodynamic adsorption parameter, enthalpy change △H of PAR for Gd(Ⅲ)is 22.6kJ·mol^(-1). The apparent adsorption activation energy(Ea)of PAR for Gd(Ⅲ)is 5.0 kJ·mol^(-1). The molar coordination ratio of the functional group of PAR to Gd(Ⅲ)is about 3∶1. The adsorption mechanism of PAR for Gd(Ⅲ)was examined by using chemical method and IR spectrometry.展开更多
Macroporous poly (vinyl acetate-co-triallyl isocyanurate) beads were prepared with suspension polymerization method. The copolymer beads were then transformed into poly (vinyl alcohol-co-triallyl isocyanurate) by est...Macroporous poly (vinyl acetate-co-triallyl isocyanurate) beads were prepared with suspension polymerization method. The copolymer beads were then transformed into poly (vinyl alcohol-co-triallyl isocyanurate) by ester exchange reaction. Aminocarboxylic acids were immobilized on the copolymer beads by the esterification of hydroxyl groups with diethyl-lenetriaminepentaacetic bisanhydride. The weak acid exchange capacities, specific surface areas and mean pore diameters of the resultant resin beads were measured.展开更多
Potassium titanate nanostructures were synthesised by hydrothermal treatment of TiO2 （P25） in KOH and H2O2. As-produced powders were characterised by scanning electron microscopy, energy-dispersive X-ray spectroscop...Potassium titanate nanostructures were synthesised by hydrothermal treatment of TiO2 （P25） in KOH and H2O2. As-produced powders were characterised by scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, X-ray diffraction, and nitrogen adsorption-desorption methods. Longitudinally-oriented-wire-like structures with a length up to several micrometres and diameters ranging from 10 to 30 nm were obtained. Larger size fibrous nanowires resulting from the hydrotherrnal treatment showed high affinity in adsorbing crystal violet （CV）, which was mainly due to their high surface area. The photocatalytic bleaching of CV solution revealed that the wires are photoactive under ultraviolet light irradiation. Macroporous nanowires are considered as effective adsorbents of CV, capable of photocatalvtic degradation, and they can be easily separated from the solution by settling.展开更多
文摘The adsorption effects of several macroporousadsorption resins for gibberellic acid (GA3) were investigated.The dynamic adsorption capacity is 58.38 mg/g drybeads for resin R4 and 96.46 mg/g dry beads for resin R5which is consistent with the surface area. Aqueous methanol(50%, V/V) is a good eluent and the yield of GA3 isabove 95%. The concentration of GA3 could increase fivefoldafter an adsorption-elution cycle and this is importantwhen considering further crystallization of GA3 in anindustrial process.
文摘The adsorption behaviors and mechanism of a novel chelate resin, macroporous phosphonic acid resin(PAR)for Gd(Ⅲ)were investigated. The statically and dynamically saturated adsorption capacity is respectively 308 mg·g^(-1)resin and 296 mg·g^(-1)resin at 298 K in HAc-NaAc medium at pH 5.6. Gd(Ⅲ)adsorbed on PAR can be reductively eluted by 0.5～5.0 mol·L^(-1) HCl used as eluant and the elution percentage is up to 94.7% in 1.0 mol·L^(-1) HCl. The resin can be regenerated and reused without apparent decrease in adsorption capacity. The apparent adsorption rate constant is k_(298)=3.96×10^(-5) s^(-1). The adsorption behavior of PAR for Gd(Ⅲ) conforms to the Freundlich isotherm. The thermodynamic adsorption parameter, enthalpy change △H of PAR for Gd(Ⅲ)is 22.6kJ·mol^(-1). The apparent adsorption activation energy(Ea)of PAR for Gd(Ⅲ)is 5.0 kJ·mol^(-1). The molar coordination ratio of the functional group of PAR to Gd(Ⅲ)is about 3∶1. The adsorption mechanism of PAR for Gd(Ⅲ)was examined by using chemical method and IR spectrometry.
基金This work was supported by the National 973 project (G1999064707)
文摘Macroporous poly (vinyl acetate-co-triallyl isocyanurate) beads were prepared with suspension polymerization method. The copolymer beads were then transformed into poly (vinyl alcohol-co-triallyl isocyanurate) by ester exchange reaction. Aminocarboxylic acids were immobilized on the copolymer beads by the esterification of hydroxyl groups with diethyl-lenetriaminepentaacetic bisanhydride. The weak acid exchange capacities, specific surface areas and mean pore diameters of the resultant resin beads were measured.
基金funded by an Australian Research Council-Linkage Project (No. LP0991544)a UTSAustralian Postgraduate Award scholarship
文摘Potassium titanate nanostructures were synthesised by hydrothermal treatment of TiO2 （P25） in KOH and H2O2. As-produced powders were characterised by scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, X-ray diffraction, and nitrogen adsorption-desorption methods. Longitudinally-oriented-wire-like structures with a length up to several micrometres and diameters ranging from 10 to 30 nm were obtained. Larger size fibrous nanowires resulting from the hydrotherrnal treatment showed high affinity in adsorbing crystal violet （CV）, which was mainly due to their high surface area. The photocatalytic bleaching of CV solution revealed that the wires are photoactive under ultraviolet light irradiation. Macroporous nanowires are considered as effective adsorbents of CV, capable of photocatalvtic degradation, and they can be easily separated from the solution by settling.
