X The catalysts of air electrode were prepared by sintering the active carbon loaded with manganese nitrate and potassium permanganate at 360 ℃ . The air electrode was made up of a catalyst layer, a waterproof and ga...X The catalysts of air electrode were prepared by sintering the active carbon loaded with manganese nitrate and potassium permanganate at 360 ℃ . The air electrode was made up of a catalyst layer, a waterproof and gas-permeable layer, a current collecting substrate and a second wa-terproof and gas-permeable layer. The cell was assembled by the air electrode, pure magnesium anode and 10% NaCl solution used as electrolyte. The microstructures of air electrodes before and after discharging were characterized by SEM. The electrochemical behaviors of the air electrodes were determined by means of polarization curves, volt-ampere curves and constant current discharge curves. The polarization voltage of air electrode is-173 mV （vs SCE） at the current density of 50 mA/cm2. The air electrodes exhibits good activity and stability in neutral electrolyte. The magnesium-air cell could work at 5 W for more than 7 h.展开更多
In this paper dry reforming of methane （DRM） was carried out over nanocrystalline MgAl2O4-supported Ni catalysts with various Ni loadings. Nanocrystalline MgAl2O4 spinel with high specific surface area was synthesiz...In this paper dry reforming of methane （DRM） was carried out over nanocrystalline MgAl2O4-supported Ni catalysts with various Ni loadings. Nanocrystalline MgAl2O4 spinel with high specific surface area was synthesized by a co-precipitation method with the addition of pluronic P123 triblock copolymer as surfactant, and employed as catalyst support. The prepared samples were characterized by X-ray diffraction （XRD）, N2 adsorption, H2 chemisorption, temperature-programmed reduction （TPR）, temperature-programmed oxidation （TPO）, temperature- programmed desorption （TPD） and transmission and scanning electron microscopies （TEM, SEM） techniques. The obtained results showed that the catalyst support has a nanocrystalline structure （crystal size： about 5 nm） with a high specific surface area （175 m2 g-1） and a mesoporous structure. Increasing in nickel content decreased the specific surface area and nickel dispersion. The prepared catalysts showed high catalytic activity and stability during the reaction. SEM analysis revealed that whisker type carbon deposited over the spent catalysts and increasing in nickel loading increased the amount of deposited carbon. The nickel catalyst with 7 wt% of nickel showed the highest catalytic activity.展开更多
In this paper, three kinds of MgO with different specific surface area were prepared, and their effects on the catalytic performance of nickel catalysts for the carbon dioxide reforming of methane were investigated. T...In this paper, three kinds of MgO with different specific surface area were prepared, and their effects on the catalytic performance of nickel catalysts for the carbon dioxide reforming of methane were investigated. The results showed that MgO support with the higher specific surface area led to the higher dispersion of the active metal, which resulted in the higher initial activity. On the other hand, the specific surface area of MgO materials might not be the dominant factor for the basicity of support to chemisorb and activate CO2, which was another important factor for the performance of catalysts. Herein, Ni/MgO(CA) catalyst with proper specific surface area and strong ability to activate CO2exhibited stable catalytic property and the carbon species deposited on the Ni/MgO(CA) catalyst after 10 h of reaction at 650 ?C were mainly activated carbon species.展开更多
The effect of chemical composition of highly active supported Ziegler-Natta catalysts with controlled morphology on the MWD of PE has been studied.It was shown the variation of transition metal compound in the MgCl_2-...The effect of chemical composition of highly active supported Ziegler-Natta catalysts with controlled morphology on the MWD of PE has been studied.It was shown the variation of transition metal compound in the MgCl_2-supported catalyst affect of MWD of PE produced in broad range:Vanadium-magnesium catalyst(VMC)produce PE with broad and bimodal MWD(M_w/M_n=14-21).MWD of PE,produced over titanium-magnesium catalyst(TMC)is narrow or medium depending on Ti content in the catalyst(M_w/M_n=3.1-4.8).The oxidation ...展开更多
In this study,the deactivation mechanism caused by high accessibility of strong acid sites for the waste FCC catalyst was proposed and verified for the first time.Based on the proposed deactivation mechanism,magnesium...In this study,the deactivation mechanism caused by high accessibility of strong acid sites for the waste FCC catalyst was proposed and verified for the first time.Based on the proposed deactivation mechanism,magnesium modification through magnesium chloride impregnation was employed for the regeneration of waste FCC catalyst.The regenerated waste FCC catalyst was characterized,with its heavy oil catalytic cracking performance tested.The characterization results indicated that,in comparison with the unmodified waste FCC catalyst,the acid sites strength of the regenerated waste FCC catalyst was weakened,with no prominent alterations of the total acid sites quantity and textural properties.The heavy oil catalytic cracking results suggested that the catalytic cracking performance of the regenerated waste FCC catalyst was greatly improved due to the suitable surface acidity of the sample.In contrast with the unmodified waste FCC catalyst,the gasoline yield over the regenerated waste FCC catalyst significantly increased by 3.04 percentage points,meanwhile the yield of dry gas,LPG,coke and bottoms obviously decreased by 0.36,0.81,1.28 and 0.87 percentage points,respectively,making the regenerated waste FCC catalyst serve as a partial substitute for the fresh FCC catalyst.Finally,the acid property change mechanism was discussed.展开更多
Hydrogen energy has emerged as a pivotal solution to address the global energy crisis and pave the way for a cleaner,low-carbon,secure,and efficient modern energy system.A key imperative in the utilization of hydrogen...Hydrogen energy has emerged as a pivotal solution to address the global energy crisis and pave the way for a cleaner,low-carbon,secure,and efficient modern energy system.A key imperative in the utilization of hydrogen energy lies in the development of high-performance hydrogen storage materials.Magnesium-based hydrogen storage materials exhibit remarkable advantages,including high hydrogen storage density,cost-effectiveness,and abundant magnesium resources,making them highly promising for the hydrogen energy sector.Nonetheless,practical applications of magnesium hydride for hydrogen storage face significant challenges,primarily due to their slow kinetics and stable thermodynamic properties.Herein,we briefly summarize the thermodynamic and kinetic properties of MgH2,encompassing strategies such as alloying,nanoscaling,catalyst doping,and composite system construction to enhance its hydrogen storage performance.Notably,nanoscaling and catalyst doping have emerged as more effective modification strategies.The discussion focuses on the thermodynamic changes induced by nanoscaling and the kinetic enhancements resulting from catalyst doping.Particular emphasis lies in the synergistic improvement strategy of incorporating nanocatalysts with confinement materials,and we revisit typical works on the multi-strategy optimization of MgH2.In conclusion,we conduct an analysis of outstanding challenges and issues,followed by presenting future research and development prospects for MgH2 as hydrogen storage materials.展开更多
While TiFe alloy has recently attracted attention as the efficient catalyst to enhance de/hydrogenation rates of Mg/MgH_(2),the difficulty of its activation characteristics has hindered further improvement of reaction...While TiFe alloy has recently attracted attention as the efficient catalyst to enhance de/hydrogenation rates of Mg/MgH_(2),the difficulty of its activation characteristics has hindered further improvement of reaction kinetics.Herein,we report that the TiFe_(0.92)Mn_(0.04)Co_(0.04) catalyst can overcome the abovementioned challenges.The synthesized MgH_(2)-30 wt% TiFe_(0.92)Mn_(0.04)Co_(0.04) can release 4.5 wt%of hydrogen in 16 min at 250℃,three times as fast as MgH_(2).The activation energy of dehydrogenation was as low as 84.6 kJ mol^(-1),which is 46.8%reduced from pure MgH_(2).No clear degradation of reaction rates and hydrogen storage capacity was observed for at least 30 cycles.Structural studies reveal that TiFe_(0.92)Mn_(0.04)Co_(0.04) partially decomposes to in-situ generatedα-Fe particles dispersed on TiFe_(0.92)Mn_(0.04)Co_(0.04).The presence ofα-Fe reduces the formation of an oxide layer on TiFe_(0.92)Mn_(0.04)Co_(0.04),enabling the activation processes.At the same time,the hydrogen incorporation capabilities of TiFe_(0.92)Mn_(0.04)Co_(0.04) can provide more hydrogen diffusion paths,which promote hydrogen dissociation and diffusion.These discoveries demonstrate the advanced nature and importance of combining the in-situ generatedα-Fe with TiFe_(0.92)Mn_(0.04)Co_(0.04).It provides a new strategy for designing highly efficient and stable catalysts for Mg-based hydrogen storage materials.展开更多
Magnesium hydride(MgH_(2))has been widely regarded as a potential hydrogen storage material owing to its high gravimetric and volumetric capacity.Its sluggish kinetics and high activation energy barrier,however,severe...Magnesium hydride(MgH_(2))has been widely regarded as a potential hydrogen storage material owing to its high gravimetric and volumetric capacity.Its sluggish kinetics and high activation energy barrier,however,severely limit its practical application.Transition metal oxides(TMOs)have been extensively used as catalysts to improve the hydrogen storage performance of MgH_(2),but the low-valence transition metal(TM)ions,resulting from the reduction of TMOs accompanied by the formation of inactive Mg O,have been demonstrated to be the most effective components.Herein,we theoretically and experimentally confirm that the doping of low-valence TMs into Mg O could effectively weaken the Mg-H bonds and decrease the energy required for hydrogen desorption from MgH_(2),leading to superior catalytic activity compared to both TMOs and Mg O.In particular,the apparent activation energy for the dehydrogenation of Mg(Nb)O-catalyzed MgH_(2)could be reduced to only 84.1 kJ mol^(-1),and the reversible capacity could reach around 7 wt.%after 5 cycles with a capacity retention of 96%.Detailed theoretical calculations confirm that the remarkable orbital hybridization between Mg(Nb)O and MgH_(2)promotes charge transfer from MgO to the MgH_(2)monomer,resulting in significantly weakened stability of MgH_(2),which could effectively enhance its hydrogen storage performance.展开更多
Carbon materials have excellent catalytic effects on the hydrogen storage performance of MgH2. Here, carbon-supported Ni3S2(denoted as Ni3S2@C) was synthesized by a facile chemical route using ion exchange resin and n...Carbon materials have excellent catalytic effects on the hydrogen storage performance of MgH2. Here, carbon-supported Ni3S2(denoted as Ni3S2@C) was synthesized by a facile chemical route using ion exchange resin and nickel acetate tetrahydrate as raw materials and then introduced to improve the hydrogen storage properties of MgH2. The results indicated the addition of 10 wt.% Ni3S2@C prepared by macroporous ion exchange resin can effectively improve the hydrogenation/dehydrogenation kinetic properties of MgH2. At 100 ℃,the dehydrogenated MgH2-Ni3S2@C-4 composite could absorb 5.68 wt.% H2. Additionally, the rehydrogenated MgH2-Ni3S2@C-4 sample could release 6.35 wt.% H2at 275 ℃. The dehydrogenation/hydrogenation enthalpy changes of MgH2-Ni3S2@C-4 were calculated to be 78.5 k J mol-1/-74.7 k J mol-1, i.e., 11.0 k J mol-1/7.3 k J mol-1lower than those of MgH2. The improvement in the kinetic properties of MgH2was ascribed to the multi-phase catalytic action of C, Mg2Ni, and Mg S, which were formed by the reaction between Ni3S2contained in the Ni3S2@C catalyst and Mg during the first hydrogen absorption–desorption process.展开更多
A small amount of Fe3O4 catalyst is known to substantially improve the adsorption and desorption thermodynamics and kinetics of Mg-based materials. Using density functional theory in combination with nudged elastic ba...A small amount of Fe3O4 catalyst is known to substantially improve the adsorption and desorption thermodynamics and kinetics of Mg-based materials. Using density functional theory in combination with nudged elastic band method,the dissociative chemisorptions of hydrogen on both pure and Fe-doped Mg(0001) surfaces were studied. The adsorption energy calculations show that a weakly physisorbed state above pure and Fe-doped Mg surface atoms can serve as a precursor state to dissociative chemisorption. Then,the dissociation pathway of H2 and the relative barrier were investigated. The calculated dissociation barrier(1.08 eV) of hydrogen molecule on a pure Mg(0001) surface is in good agreement with comparable experimental and theoretical studies. For the Fe-doped Mg(0001) surface,the activated barrier decreases to 0.101 eV due to the strong interaction between the s orbital of H and the d orbital of Fe.展开更多
Oxidative coupling of methane （OCM） is a promising way to convert methane into C2 hydrocarbons.However,CO2 and H2O are by-products of the reaction.To utilize the higher activity of lanthanum oxide and save its usage...Oxidative coupling of methane （OCM） is a promising way to convert methane into C2 hydrocarbons.However,CO2 and H2O are by-products of the reaction.To utilize the higher activity of lanthanum oxide and save its usage,MgO supported La2O3 catalyst was prepared.Surface modification of the catalyst with nitric acid was made to suppress the formation of the by-products.Experimental results indicated that the addition of nitric acid increased the surface oxygen species with binding energy of ca.531.7 eV and at the same time reduced the pore volume of the catalyst.These effects of nitric acid finally led to the increase of C2 selectivity and the decrease of the by-products formation.Hydrogen selectivity was found about 14%-18% over the catalysts adopted in this work.展开更多
文摘X The catalysts of air electrode were prepared by sintering the active carbon loaded with manganese nitrate and potassium permanganate at 360 ℃ . The air electrode was made up of a catalyst layer, a waterproof and gas-permeable layer, a current collecting substrate and a second wa-terproof and gas-permeable layer. The cell was assembled by the air electrode, pure magnesium anode and 10% NaCl solution used as electrolyte. The microstructures of air electrodes before and after discharging were characterized by SEM. The electrochemical behaviors of the air electrodes were determined by means of polarization curves, volt-ampere curves and constant current discharge curves. The polarization voltage of air electrode is-173 mV （vs SCE） at the current density of 50 mA/cm2. The air electrodes exhibits good activity and stability in neutral electrolyte. The magnesium-air cell could work at 5 W for more than 7 h.
文摘In this paper dry reforming of methane （DRM） was carried out over nanocrystalline MgAl2O4-supported Ni catalysts with various Ni loadings. Nanocrystalline MgAl2O4 spinel with high specific surface area was synthesized by a co-precipitation method with the addition of pluronic P123 triblock copolymer as surfactant, and employed as catalyst support. The prepared samples were characterized by X-ray diffraction （XRD）, N2 adsorption, H2 chemisorption, temperature-programmed reduction （TPR）, temperature-programmed oxidation （TPO）, temperature- programmed desorption （TPD） and transmission and scanning electron microscopies （TEM, SEM） techniques. The obtained results showed that the catalyst support has a nanocrystalline structure （crystal size： about 5 nm） with a high specific surface area （175 m2 g-1） and a mesoporous structure. Increasing in nickel content decreased the specific surface area and nickel dispersion. The prepared catalysts showed high catalytic activity and stability during the reaction. SEM analysis revealed that whisker type carbon deposited over the spent catalysts and increasing in nickel loading increased the amount of deposited carbon. The nickel catalyst with 7 wt% of nickel showed the highest catalytic activity.
基金supported by the South-Central University for Nationalities(CZZ12002)
文摘In this paper, three kinds of MgO with different specific surface area were prepared, and their effects on the catalytic performance of nickel catalysts for the carbon dioxide reforming of methane were investigated. The results showed that MgO support with the higher specific surface area led to the higher dispersion of the active metal, which resulted in the higher initial activity. On the other hand, the specific surface area of MgO materials might not be the dominant factor for the basicity of support to chemisorb and activate CO2, which was another important factor for the performance of catalysts. Herein, Ni/MgO(CA) catalyst with proper specific surface area and strong ability to activate CO2exhibited stable catalytic property and the carbon species deposited on the Ni/MgO(CA) catalyst after 10 h of reaction at 650 ?C were mainly activated carbon species.
文摘The effect of chemical composition of highly active supported Ziegler-Natta catalysts with controlled morphology on the MWD of PE has been studied.It was shown the variation of transition metal compound in the MgCl_2-supported catalyst affect of MWD of PE produced in broad range:Vanadium-magnesium catalyst(VMC)produce PE with broad and bimodal MWD(M_w/M_n=14-21).MWD of PE,produced over titanium-magnesium catalyst(TMC)is narrow or medium depending on Ti content in the catalyst(M_w/M_n=3.1-4.8).The oxidation ...
基金supported by the Exploratory Research Program of Petrochemical Research Institute (16-yk-01-03),PetroChina
文摘In this study,the deactivation mechanism caused by high accessibility of strong acid sites for the waste FCC catalyst was proposed and verified for the first time.Based on the proposed deactivation mechanism,magnesium modification through magnesium chloride impregnation was employed for the regeneration of waste FCC catalyst.The regenerated waste FCC catalyst was characterized,with its heavy oil catalytic cracking performance tested.The characterization results indicated that,in comparison with the unmodified waste FCC catalyst,the acid sites strength of the regenerated waste FCC catalyst was weakened,with no prominent alterations of the total acid sites quantity and textural properties.The heavy oil catalytic cracking results suggested that the catalytic cracking performance of the regenerated waste FCC catalyst was greatly improved due to the suitable surface acidity of the sample.In contrast with the unmodified waste FCC catalyst,the gasoline yield over the regenerated waste FCC catalyst significantly increased by 3.04 percentage points,meanwhile the yield of dry gas,LPG,coke and bottoms obviously decreased by 0.36,0.81,1.28 and 0.87 percentage points,respectively,making the regenerated waste FCC catalyst serve as a partial substitute for the fresh FCC catalyst.Finally,the acid property change mechanism was discussed.
基金supported by National Key Research and Development Program of China(2021YFB4000604)National Natural Science Foundation of China(52271220)111 Project(B12015)and the Fundamental Research Funds for the Central Universities.
文摘Hydrogen energy has emerged as a pivotal solution to address the global energy crisis and pave the way for a cleaner,low-carbon,secure,and efficient modern energy system.A key imperative in the utilization of hydrogen energy lies in the development of high-performance hydrogen storage materials.Magnesium-based hydrogen storage materials exhibit remarkable advantages,including high hydrogen storage density,cost-effectiveness,and abundant magnesium resources,making them highly promising for the hydrogen energy sector.Nonetheless,practical applications of magnesium hydride for hydrogen storage face significant challenges,primarily due to their slow kinetics and stable thermodynamic properties.Herein,we briefly summarize the thermodynamic and kinetic properties of MgH2,encompassing strategies such as alloying,nanoscaling,catalyst doping,and composite system construction to enhance its hydrogen storage performance.Notably,nanoscaling and catalyst doping have emerged as more effective modification strategies.The discussion focuses on the thermodynamic changes induced by nanoscaling and the kinetic enhancements resulting from catalyst doping.Particular emphasis lies in the synergistic improvement strategy of incorporating nanocatalysts with confinement materials,and we revisit typical works on the multi-strategy optimization of MgH2.In conclusion,we conduct an analysis of outstanding challenges and issues,followed by presenting future research and development prospects for MgH2 as hydrogen storage materials.
基金supported by The National Key Research and Development Program of China(2023YFB3809100)the National Natural Science Foundation of China(U23A200722)the Fundamental Research Funds for the Central Universities(2023CDJXY-016).
文摘While TiFe alloy has recently attracted attention as the efficient catalyst to enhance de/hydrogenation rates of Mg/MgH_(2),the difficulty of its activation characteristics has hindered further improvement of reaction kinetics.Herein,we report that the TiFe_(0.92)Mn_(0.04)Co_(0.04) catalyst can overcome the abovementioned challenges.The synthesized MgH_(2)-30 wt% TiFe_(0.92)Mn_(0.04)Co_(0.04) can release 4.5 wt%of hydrogen in 16 min at 250℃,three times as fast as MgH_(2).The activation energy of dehydrogenation was as low as 84.6 kJ mol^(-1),which is 46.8%reduced from pure MgH_(2).No clear degradation of reaction rates and hydrogen storage capacity was observed for at least 30 cycles.Structural studies reveal that TiFe_(0.92)Mn_(0.04)Co_(0.04) partially decomposes to in-situ generatedα-Fe particles dispersed on TiFe_(0.92)Mn_(0.04)Co_(0.04).The presence ofα-Fe reduces the formation of an oxide layer on TiFe_(0.92)Mn_(0.04)Co_(0.04),enabling the activation processes.At the same time,the hydrogen incorporation capabilities of TiFe_(0.92)Mn_(0.04)Co_(0.04) can provide more hydrogen diffusion paths,which promote hydrogen dissociation and diffusion.These discoveries demonstrate the advanced nature and importance of combining the in-situ generatedα-Fe with TiFe_(0.92)Mn_(0.04)Co_(0.04).It provides a new strategy for designing highly efficient and stable catalysts for Mg-based hydrogen storage materials.
基金supported by the National Key R&D Program of China(No.2018YFB1502101)National Science Fund for Distinguished Young Scholars(51625102)+5 种基金National Natural Science Foundation of China(Nos.51874049,51401036,51901045)the Innovation Program of Shanghai Municipal Education Commission(2019–01–07–00–07E00028)the Science and Technology Commission of Shanghai Municipality(17XD1400700)the Changsha Science and Technology Program Project(No.kq1907092)the Science Research Project of Hunan Province Office of Education(No.20A024)the Programs for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learning
文摘Magnesium hydride(MgH_(2))has been widely regarded as a potential hydrogen storage material owing to its high gravimetric and volumetric capacity.Its sluggish kinetics and high activation energy barrier,however,severely limit its practical application.Transition metal oxides(TMOs)have been extensively used as catalysts to improve the hydrogen storage performance of MgH_(2),but the low-valence transition metal(TM)ions,resulting from the reduction of TMOs accompanied by the formation of inactive Mg O,have been demonstrated to be the most effective components.Herein,we theoretically and experimentally confirm that the doping of low-valence TMs into Mg O could effectively weaken the Mg-H bonds and decrease the energy required for hydrogen desorption from MgH_(2),leading to superior catalytic activity compared to both TMOs and Mg O.In particular,the apparent activation energy for the dehydrogenation of Mg(Nb)O-catalyzed MgH_(2)could be reduced to only 84.1 kJ mol^(-1),and the reversible capacity could reach around 7 wt.%after 5 cycles with a capacity retention of 96%.Detailed theoretical calculations confirm that the remarkable orbital hybridization between Mg(Nb)O and MgH_(2)promotes charge transfer from MgO to the MgH_(2)monomer,resulting in significantly weakened stability of MgH_(2),which could effectively enhance its hydrogen storage performance.
基金supported by the National Natural Science Foundation of China (grant number 51571065)the Natural Science Foundation of Guangxi Province (grant numbers, 2018GXNSFAA294125, 2018GXNSFAA281308, 2019GXNSFAA245050)+1 种基金the Innovation-Driven Development Foundation of Guangxi Province (grant number AA17204063)the Innovation Project of Guangxi Graduate Education (grant number YCSW2020046)。
文摘Carbon materials have excellent catalytic effects on the hydrogen storage performance of MgH2. Here, carbon-supported Ni3S2(denoted as Ni3S2@C) was synthesized by a facile chemical route using ion exchange resin and nickel acetate tetrahydrate as raw materials and then introduced to improve the hydrogen storage properties of MgH2. The results indicated the addition of 10 wt.% Ni3S2@C prepared by macroporous ion exchange resin can effectively improve the hydrogenation/dehydrogenation kinetic properties of MgH2. At 100 ℃,the dehydrogenated MgH2-Ni3S2@C-4 composite could absorb 5.68 wt.% H2. Additionally, the rehydrogenated MgH2-Ni3S2@C-4 sample could release 6.35 wt.% H2at 275 ℃. The dehydrogenation/hydrogenation enthalpy changes of MgH2-Ni3S2@C-4 were calculated to be 78.5 k J mol-1/-74.7 k J mol-1, i.e., 11.0 k J mol-1/7.3 k J mol-1lower than those of MgH2. The improvement in the kinetic properties of MgH2was ascribed to the multi-phase catalytic action of C, Mg2Ni, and Mg S, which were formed by the reaction between Ni3S2contained in the Ni3S2@C catalyst and Mg during the first hydrogen absorption–desorption process.
基金Project(2007AA05Z118) supported by the Hi-tech Research and Development Program of ChinaProject(50804029, 50504010) supported by the National Natural Science Foundation of China+1 种基金Project(200746) supported by Foundation for the Author of National Excellent Doctoral Dissertation of ChinaProject(IRT0739) supported by Program for Changjiang Scholars and Innovative Research Team in University
文摘A small amount of Fe3O4 catalyst is known to substantially improve the adsorption and desorption thermodynamics and kinetics of Mg-based materials. Using density functional theory in combination with nudged elastic band method,the dissociative chemisorptions of hydrogen on both pure and Fe-doped Mg(0001) surfaces were studied. The adsorption energy calculations show that a weakly physisorbed state above pure and Fe-doped Mg surface atoms can serve as a precursor state to dissociative chemisorption. Then,the dissociation pathway of H2 and the relative barrier were investigated. The calculated dissociation barrier(1.08 eV) of hydrogen molecule on a pure Mg(0001) surface is in good agreement with comparable experimental and theoretical studies. For the Fe-doped Mg(0001) surface,the activated barrier decreases to 0.101 eV due to the strong interaction between the s orbital of H and the d orbital of Fe.
文摘Oxidative coupling of methane （OCM） is a promising way to convert methane into C2 hydrocarbons.However,CO2 and H2O are by-products of the reaction.To utilize the higher activity of lanthanum oxide and save its usage,MgO supported La2O3 catalyst was prepared.Surface modification of the catalyst with nitric acid was made to suppress the formation of the by-products.Experimental results indicated that the addition of nitric acid increased the surface oxygen species with binding energy of ca.531.7 eV and at the same time reduced the pore volume of the catalyst.These effects of nitric acid finally led to the increase of C2 selectivity and the decrease of the by-products formation.Hydrogen selectivity was found about 14%-18% over the catalysts adopted in this work.
