With the vigorous development of the electronics industry,the consumption of lithium continues to increase,and more lithium needs to be mined to meet the development of the industry.The content of lithium in the solut...With the vigorous development of the electronics industry,the consumption of lithium continues to increase,and more lithium needs to be mined to meet the development of the industry.The content of lithium in the solution is much higher than that of minerals,but the interference of impurity ions increases the difficulty of extracting lithium ions.Therefore,we prepared an imidazole-based ionic liquid(1-butyl-3-methylImidazolium bis(trifluoromethyl sulfonyl)imide)(IL)for efficient lithium extraction from aqueous solutions by solvent extraction.Using an extraction consisting of 10%IL,85% tributyl phosphate(TBP),and 5% dichloroethane and an organic to aqueous phase ratio(O/A)of 2/1,over 64.23% of Li were extracted,and the extraction rate after five-stage extraction could reach more than 96%.The addition of ammonium ions to the solution inhibited the extraction of Ni,and the separation coefficient between lithium and nickel approached infinity,showing a very perfect separation effect.Fouriertransform infrared spectroscopy and slope methods were used to analyze the changes that occurred during extraction,revealing possible extraction mechanisms.In addition,the LiCl solution generated during the preparation of ionic liquids was mixed with the stripping solution,and the battery-grade lithium carbonate was prepared by Na_(2)CO_(3) precipitation,with a purity of 99.74%.This study provides an efficient and sustainable strategy for recovering lithium from the solution.展开更多
Ionic selectivity is of significant importance in both fundamental science and practical applications.For instance,an ion-selective material allows the passage of a particular kind of ions while blocking the others,wh...Ionic selectivity is of significant importance in both fundamental science and practical applications.For instance,an ion-selective material allows the passage of a particular kind of ions while blocking the others,which could be used for purification of materials.Herein,the Li-ion-selectivity of a garnet-type solid electrolyte is discussed by comparing the difference of activation energy between different ions migrating in solids.The high ion-selectivity is confirmed by harvesting high-purity metallic lithium(99.98 wt%)from low-lithium-purity sources(80 wt%)at a moderate temperature(190℃).This gives it huge potential in separating lithium with impurities especially alkali and alkali-earth elements.The cost of metallic lithium production is only 25%of the international lithium price.The proposed electrochemical metallic lithium separating method is advantageous compared with the traditional process in terms of efficiency,safety,and cost.展开更多
In traditional in situ polymerization preparation for solid-state electrolytes,initiators are directly added to the liquid precursor.In this article,a novel cellulose paper-based composite separator is fabricated,whic...In traditional in situ polymerization preparation for solid-state electrolytes,initiators are directly added to the liquid precursor.In this article,a novel cellulose paper-based composite separator is fabricated,which employs alumina as the inorganic reinforcing material and is loaded with polymerization initiator aluminum trifluoromethanesulfonate.Based upon this,a separator-induced in situ directional polymerization technique is demonstrated,and the extra addition of initiators into liquid precursors is no longer required.The polymerization starts from the surface and interior of the separator and extends outward with the gradually dissolving of initiators into the precursor.Compared with its traditional counterpart,the separator-induced poly(1,3-dioxolane)electrolyte shows improved interfacial contact as well as appropriately mitigated polymerization rate,which are conducive to practical applications.Electrochemical measurement results show that the prepared poly(1,3-dioxolane)solid electrolyte possesses an oxidation potential up to 4.4 V and a high Li+transference number of 0.72.After 1000 cycles at 2 C rate(340 mA g^(−1)),the assembled Li||LiFePO_(4)solid battery possesses a 106.8 mAh g^(−1)discharge capacity retention and 83.5%capacity retention ratio,with high average Coulombic efficiency of 99.5%achieved.Our work may provide new ideas for the design and application of in situ polymerization technique for solid electrolytes and solid batteries.展开更多
Boosting of rechargeable lithium metal batteries(LMBs) holds challenges because of lithium dendrites germination and high-reactive surface feature.Separators may experience structure-determined chemical deterioration ...Boosting of rechargeable lithium metal batteries(LMBs) holds challenges because of lithium dendrites germination and high-reactive surface feature.Separators may experience structure-determined chemical deterioration and worsen Li plating-stripping behaviors when smoothly shifting from lithium-ion batteries(LIBs) to LMBs.This study precisely regulations the crystal structure of β-polypropylene and separator porous construction to investigate the intrinsic porous structure and mechanical properties determined electrochemical performances and cycling durability of LMBs.Crystal structure characterizations,porous structure analyses,and electrochemical cycling tests uncover appropriate annealing thermal stimulation concentrates β-lamellae thickness and enhances lamellae thermal stability by rearranging molecular chain in inferior β-lamellae,maximally homogenizing biaxial tensile deformation and resultant porous constructions.These even pores with high connectivity lower ion migration barriers,alleviate heterogeneous Li^(+) flux dispersion,stabilize reversible Li plating-stripping behaviors,and hinder coursing and branching of Li dendrites,endowing steady cell cycling durability,especially at higher currents due to the highlighted uncontrollable cumulation of dead Li,which offers new insights for the current pursuit of high-power density battery and fast charging technology.The suggested separator structure-chemical nature functions in ensuring cyclic cell stability and builds reliable relationships between separator structure design and practical LMBs applications.展开更多
Separators have been gaining increasing attention to improve the performance of lithium ion batteries(LIBs),especially for high safe and long cycle life.However,commercial polyolefin separators still face the problems...Separators have been gaining increasing attention to improve the performance of lithium ion batteries(LIBs),especially for high safe and long cycle life.However,commercial polyolefin separators still face the problems of rapid capacity decay and safety issues due to the poor wettability with electrolytes and low thermal stability.Herein,a novel composite separator is proposed by introducing a surfactant of sodium dodecyl thiosulfate(SDS)into the polytetrafluoroethylene(PTFE)substrate with the binder of polyacrylic acid(PAA)through the suction filtration method.The introduction of PAA/SDS enhances the adsorption energy between PTFE substrate and electrolyte through density functional theory calculations,which improves wettability and electrolyte uptake of the separator significantly.The asachieved composite separator enables the LIBs to own high Li^(+)conductivity(0.64×10^(-3)S cm^(-1))and Li^(+)transference number(0.63),further leading to a high capacity retention of 93.50%after 500 cycles at 1 C.In addition,the uniform and smooth surface morphology of Li metal employed the composite separator after cycling indicates that the lithium dendrites can be successfully inhibited.This work indicates a promising route for the preparation of a novel composite separator for high safe LIBs.展开更多
Development of practical lithium(Li)metal batteries(LMBs)remains challenging despite promises of Li metal anodes(LMAs),owing to Li dendrite formation and highly reactive surface nature.Polyolefin separators used in LM...Development of practical lithium(Li)metal batteries(LMBs)remains challenging despite promises of Li metal anodes(LMAs),owing to Li dendrite formation and highly reactive surface nature.Polyolefin separators used in LMBs may undergo severe mechanical and chemical deterioration when contacting with LMAs.To identify the best polyolefin separator for LMBs,this study investigated the separator-deterministic cycling stability of LMBs under practical conditions,and redefined the key influencing factors,including pore structure,mechanical stability,and chemical affinity,using 12 different commercial separators,including polyethylene(PE),polypropylene(PP),and coated separators.At extreme compression triggered by LMA swelling,isotropic stress release by balancing the machine direction and transverse direction tensile strengths was found to be crucial for mitigating cell short-circuiting.Instead of PP separators,a PE separator that possesses a high elastic modulus and a highly connected pore structure can uniformly regulate LMA swelling.The ceramic coating reinforced short-circuiting resistance,while the cycling efficiency degraded rapidly owing to the detrimental interactions between ceramics and LMAs.This study identified the design principle of separators for practical LMBs with respect to mechanical stability and chemical affinity toward LMAs by elucidating the impacts of separator modification on the cycling performance.展开更多
With the rapid development of portable technology,lithium batteries have emerged as potential candidates for high-performance energy storage systems owing to their high energy density and cycling stability.Among the k...With the rapid development of portable technology,lithium batteries have emerged as potential candidates for high-performance energy storage systems owing to their high energy density and cycling stability.Among the key components of a lithium battery system,the separator plays a critical role as it directly influences the battery performance benchmark(cycling performance and safety).However,traditional polyolefin separators(polypropylene/polyethylene)are unable to meet the demands of highperformance and safer battery systems due to their poor electrolyte compatibility,thermal runaways,and ultimate growth of dendrites.In contrast,membranes fabricated using polybenzimidazole(PBI)exhibit excellent electrolyte wettability and outstanding thermal dimensional stability,thus holding great potential as separators for high-performance and high-safety batteries.In this paper,we present a comprehensive review of the general requirements for separators,synthesis technology for separators,and research trends focusing PBI membranes in lithium batteries to alleviate the current commercial challenges faced by conventional polyolefin separators.In addition,we discuss the future development direction for PBI battery separators by considering various factors such as production cost,ecological footprint,preparation technology,and battery component compatibility.By exploring these perspectives,we aim to promote the continued application and exploration of PBI-based materials to advance lithium battery technology.展开更多
The absence of control over carriers transport during electrochemical cycling,accompanied by the deterioration of the solid electrolyte interphase(SEI)and the growth of lithium dendrites,has hindered the development o...The absence of control over carriers transport during electrochemical cycling,accompanied by the deterioration of the solid electrolyte interphase(SEI)and the growth of lithium dendrites,has hindered the development of lithium metal batteries.Herein,a separator complexion consisting of polyacrylonitrile(PAN)nanofiber and MIL-101(Cr)particles prepared by electrospinning is proposed to bind the anions from the electrolyte utilizing abundant effective open metal sites in the MIL-101(Cr)particles to modulate the transport of non-effective carriers.The binding effect of the PANM separator promotes uniform lithium metal deposition and enhances the stability of the SEI layer and long cycling stability of ultra-high nickel layered oxide cathodes.Taking PANM as the Li||NCM96 separator enables high-voltage cycling stability,maintaining 72%capacity retention after 800 cycles at a charging and discharging rate of 0.2 C at a cut-off voltage of 4.5 V and 0°C.Meanwhile,the excellent high-rate performance delivers a specific capacity of 156.3 mA h g^(-1) at 10 C.In addition,outstanding cycling performance is realized from−20 to 60°C.The separator engineering facilitates the electrochemical performance of lithium metal batteries and enlightens a facile and promising strategy to develop fast charge/discharge over a wide range of temperatures.展开更多
The practical application of lithium–sulfur(Li–S)batteries is limited by the easy dissolution of polysulfides in the electrolyte,resulting in the lithium polysulfide(LPS)shuttle effect.Several two-dimensional(2D)mat...The practical application of lithium–sulfur(Li–S)batteries is limited by the easy dissolution of polysulfides in the electrolyte,resulting in the lithium polysulfide(LPS)shuttle effect.Several two-dimensional(2D)materials with abundant active binding sites and high surface-to-volume ratios have been developed to prepare functional separators that suppress the diffusion of polysulfides.However,the influence of modified layer thickness on Li+transport has not been considered.Herein,we synthesized individual and multilayered 2D Ti3C2Tx MXene nanosheets and used them to fabricate a series of Ti3C2Tx-PP modified separators.The separators had mass loadings ranging from 0.16 to 0.016 mg cm-2,which is the lowest value reported for 2D materials to the best of our knowledge.The corresponding reductions in thickness ranged from 1.2μm to 100 nm.LPS shuttling was effectively suppressed,even at the lowest mass loading of 0.016 mg cm-2.Suppression was due to the strong interaction between LPS intermediates and Ti atoms and hydroxyl functional groups on the separator surface.The lithium-ion diffusion coefficient increased with the reduction of Ti3C2Tx layers on the separator.Superior cycling stability and rate performance were attained when the separator with a Ti3C2Tx-PP mass loading of 0.016 mg cm-2 was incorporated into a Li–S battery.Carbon nanotubes(CNTs)were introduced into the separators to further improve the electrical and Li+ionic conductivity in the cross-plane direction of the 2D Ti3C2Txlayers.With the ultralightweight Ti3C2Tx/CNTs modified PP separator,the cell maintained a capacity of 640 m Ah g-1after 200cycles at 1C with a capacity decay of only 0.079%per cycle.展开更多
Surface chemical modification of polyolefin separators for lithium ion batteries is attempted to reduce the thermal shrinkage, which is im- portant for the battery energy density. In this study, we grafted organic/ino...Surface chemical modification of polyolefin separators for lithium ion batteries is attempted to reduce the thermal shrinkage, which is im- portant for the battery energy density. In this study, we grafted organic/inorganic hybrid crosslinked networks on the separators, simply by grafting polymerization and condensation reaction. The considerable silicon-oxygen crosslinked heat-resistance networks are responsible for the reduced thermal shrinkage. The strong chemical bonds between networks and separators promise enough mechanical support even at high temperature. The shrinkage at 150 ℃ for 30 min in the mechanical direction was 38.6% and 4.6% for the pristine and present graft-modified separators, respectively. Meanwhile, the grafting organic-inorganic hybrid crosslink networks mainly occupied part of void in the internal pores of the separators, so the thicknesses of the graft-modified separators were similar with the pristine one. The half cells prepared with the modified separators exhibited almost identical electrochemical properties to those with the commercial separators, thus proving that, in order to enhance the thermal stability of lithium ion battery, this kind of grafting-modified separators may be a better alternative to conventional silica nanoparticle layers-coated polyolefin separators.展开更多
Lithium-ion batteries (LIBs)-related accidents have been reported for years and safety issues are stumbling blocks for the practical applications of lithium metal batteries (LMBs) with higher energy density. More effe...Lithium-ion batteries (LIBs)-related accidents have been reported for years and safety issues are stumbling blocks for the practical applications of lithium metal batteries (LMBs) with higher energy density. More effective strategies to shut down the battery at the early stage of thermal runaway with less side effects on the electrochemical performance are greatly desired. In this work, the core–shell structural paraffin@SiO_(2) microparticles were synthesized by in situ emulsion interfacial hydrolysis and polycondensation and the paraffin@SiO_(2)-loaded separator (PSS) was prepared by a facile filtration method. The introduction of hydrophilic silica shells in paraffin@SiO_(2) enhanced the wettability of carbonate electrolyte with the composite separator and improved the processability of soft paraffin. As a result, when used in LMBs at room temperature, the cell with PSS inside had a more uniform deposition of lithium, a much lower overpotential and a more stable electrochemical performance than the cell with the blank separator or the conventional pure paraffin-loaded separator inside. More significantly, when a heating stimulation (i.e. 115 ℃) was subjected to the cell with PSS inside, the paraffin in the core of paraffin@SiO_(2) could be released, blocking the gaps between particles and the pores in the separator and efficiently stopping the transportation of Li+ between two electrodes, resulting in the thermally-induced shutdown of the cell below the melting temperature of PE (~135 ℃) in the Celgard2325 separator. The core–shell structure of paraffin@SiO_(2) enables the maintaining of each component’s benefits while avoiding each one’s drawbacks by elaborating microstructural design. Therefore, the conventional dilemma between the electrochemcial performance and safety of LMBs could be solved in the future.展开更多
The Mg2+/Li+/Cl solutions were filtrated with a commercially available DK nanofiltration membrane to investigate the possibility to enrich the lithium component.The investigation was significant as such an approach mi...The Mg2+/Li+/Cl solutions were filtrated with a commercially available DK nanofiltration membrane to investigate the possibility to enrich the lithium component.The investigation was significant as such an approach might be a competing substitute for the present lithium purification industry and the environmental protection purpose.The Donnan steric pore model(DSPM) was implemented for the prediction.The separation of Mg2+/Li+was mainly affected by the working pressure(or the permeation flux) and a limiting separation factor was found around 0.31.The effective membrane charge density was evaluated and its dependence on the permeation flux as well as the ion pattern was discussed.For predicting an actual separation of electrolytes,the experimental investigation seems necessary for the reliability and efficiency.展开更多
Epoxy resin powder coating has been successfully applied on the corrosion protection of magnesium lithium alloys.However,poor wear resistance and microcracks formed during the solidification have limited it extensive ...Epoxy resin powder coating has been successfully applied on the corrosion protection of magnesium lithium alloys.However,poor wear resistance and microcracks formed during the solidification have limited it extensive application.There are limited approaches to exploit such anti-corrosion and mechanical properties of magnesium lithium alloys.Herein,the epoxy resin powder coating with polydopamine modified molybdenum disulfide(MoS_(2)@PDA-EP powder coating with 0,0.1,0.2,0.5,1.0 wt.%loading)was well prepared by melt extrusion to investigate its anticorrosion performance and wear resistance.The results revealed that the addition of MoS_(2)@PDA enhanced the adhesion strength between coatings and alloys,wear resistance and corrosion protection of the powder coatings.Among them,the optimum was obtained by 0.2 wt.%MoS_(2)@PDA-EP powder coating which could be attributed to well dispersion and efficient adhesion with coating matrix.To conclude,MoS_(2)@PDA-EP powder coating is meaningfully beneficial for the anticorrosive and wear performance improvement of magnesium lithium alloys.展开更多
As the energy density of lithium-ion batteries (LIBs) continues to increase,their safety has become a great concern for further practical large-scale applications.One of the ultimate solution of the safety issue is to...As the energy density of lithium-ion batteries (LIBs) continues to increase,their safety has become a great concern for further practical large-scale applications.One of the ultimate solution of the safety issue is to develop intrinsically safe battery components,where the battery separators and liquid electrolytes are critical for the battery thermal runaway process.In this review,we summarize recent progress in the rational materials design on battery separators and liquid electrolyte towards the goal of improving the safety of LIBs.Also,some strategies for further improving safety of LIBs are also briefly outlooked.展开更多
An unstable solid electrolyte interphase(SEI)and chaotic lithium ion fux are key impediments to commercial high-energy-density lithium batteries because of the uncontrolled growth of rigid lithium dendrites,which woul...An unstable solid electrolyte interphase(SEI)and chaotic lithium ion fux are key impediments to commercial high-energy-density lithium batteries because of the uncontrolled growth of rigid lithium dendrites,which would pierce through the conventional polypropylene(PP)separator,causing short circuit and safety issues.Herein,the homogenization of lithium ion fux and the generation of stable SEI layers on lithium anodes were achieved via coating a fuorine-functionalized Ti_(3)C_(2)(F-Ti_(3)C_(2))nanosheets on PP separator(F-Ti_(3)C_(2)@PP).F-Ti_(3)C_(2)nanosheets provide abundant ions pathways to homogeneously manipulate lithium ion fux and increase the Young’s modulus and electrolyte wettability of the separators.In addition,F species derived from the F-Ti_(3)C_(2)nanosheets would promote the formation of Li F-rich SEI film.The synergistic effect contribute to the uniform lithium deposition.Symmetric Li|Li,asymmetric Li|Cu and full Li|Li Fe PO4cells incorporated with the modified separators exhibit improved electrochemical performance even under lean electrolyte conditions.This work provides a feasible strategy to improve the performance of lithium batteries through both fuoridized SEI formation and lithium ion fux manipulation.展开更多
The guided Li dendrite growth by carbon-modifying separator is believed to be an effective strategy for enhancing life of lithium metal batteries(LMBs).However,the weak adhesions,as well as the large interface impedan...The guided Li dendrite growth by carbon-modifying separator is believed to be an effective strategy for enhancing life of lithium metal batteries(LMBs).However,the weak adhesions,as well as the large interface impedance between the smooth separator and the carbon functional layer(CFL) lead to an easily peeling of the CFL after repetitive cycles.Herein,we propose a promising solution by an inserting thin buffer layer(TBL) to strengthen the adhesion between CFL and separator as a double modifying layer(C-TBL) of the LMBs separator,which greatly improves the stability of the CFL and provides an effective Li metal anode protection.Owing to the sufficient ionic conductivity,chemical stability and strong adhesion to the separator of the TBL,it can avoid the failure of the CFL functionality with small interface impedance.Moreover,the CFL effectively reduces localized flux of Li+ through its abundant pores.The Li/Li cell with C-TBL separator displays the Li dendrite-free and stable cycling performance for at least 1500 h.When LiFePO_(4)(LFP) is employed as the cathode electrode,the assembled full cell with C-TBL separator shows the excellent rate performance and outstanding cycling capability.Our study builds a stable Li+conducting "bridge" between the functional layer and the separator in stabilizing Li metal anode,and provides a fresh idea of the artificial separator of LMBs.展开更多
Magnesium hydride, with high specific capacity, favorable voltage profile and low voltage hysteresis properties, is regarded as a promising anode for lithium storage. However, the rapid fading of capacity caused by hu...Magnesium hydride, with high specific capacity, favorable voltage profile and low voltage hysteresis properties, is regarded as a promising anode for lithium storage. However, the rapid fading of capacity caused by huge volume change, low electron/ion conduction, and spontaneous agglomeration of active materials during cycling greatly limit its practical application in lithium-ion batteries. Herein, we report the synthesis of monodisperse MgH2 nanoparticles with an average particle size of <20 nm homogeneously anchored on Ti3C2 MXene sheets by bottom-up self-assembly strategy. The unique nanoarchitectures are able to efficiently enhance the lithium insertion/extraction kinetics, accelerate the electron/lithium ion transfer and buffer the strain of volume changes. More importantly, the formed F–Mg bounding between MgH2 and MXene could avoid the shedding of MgH2 nanoparticles to electrolyte during cycling, which significantly enhance the capacity, cyclability, and rate performance of magnesium hydride. Moreover, due to the high density of MXene and the synergistic effect between the MgH2 and MXene matrix, the MgH2/MXene composite with 60 wt% MgH2 delivers a superior volumetric capacity of 1092.9 mAh cm−3 at a current density of 2000 mA g^(−1) after 1000 cycles. These results highlight the great promising of MgH2/MXene composite for high performance lithium-ion batteries.展开更多
Severe performance drop and fire risk due to the uneven lithium(Li) dendrite formation and growth during charge/discharge process has been considered as the major obstacle to the practical application of Li metal batt...Severe performance drop and fire risk due to the uneven lithium(Li) dendrite formation and growth during charge/discharge process has been considered as the major obstacle to the practical application of Li metal batteries.So inhibiting dendrite growth and producing a stable and robust solid electrolyte interface(SEI) layer are essential to enable the use of Li metal anodes.In this work,a functional lithiophilic polymer composed of chitosan(CTS),polyethylene oxide(PEO),and poly(triethylene glycol dimethacrylate)(PTEGDMA),was homogeneously deposited on a commercial Celgard separator by combining electrospraying and polymer photopolymerization techniques.The lithiophilic environment offered by the CTS-PEO-PTEGDMA layer enables uniform Li deposition and facilitates the formation of a robust homogeneous SEI layer,thus prevent the formation and growth of Li dendrites.As a result,both Li/Li symmetric cells and LiFePO4/Li full cells deliver significantly enhanced electrochemical performance and cycle life.Even after 1000 cycles,the specific capacity of the modified full cell could be maintained at65.8 mAh g^(-1), twice which of the unmodified cell(32.8 mAh g^(-1)).The long-term cycling stability in Li/Li symmetric cells,dendrite-free anodes in SEM images and XPS analysis suggest that the pulverization of the Li anode was effectively suppressed by the lithiophilic polymer layer.展开更多
Thermal runaway is the main factor contributing to the unsafe behaviors of lithium-ion batteries(LIBs)in practical applications.The application of separators for the thermal shutdown has been proven as an effective ap...Thermal runaway is the main factor contributing to the unsafe behaviors of lithium-ion batteries(LIBs)in practical applications.The application of separators for the thermal shutdown has been proven as an effective approach to protecting LIBs from thermal runaway.In this work,we developed a thermal shutdown separator by coating a thin layer of low-density polyethylene microspheres(PM)onto a commercial porous polypropylene(PP)membrane and investigated the thermal response behaviors of the as-prepared PM/PP separator in LIBs.The structural and thermal analysis results revealed that the coated PM layer had a porous structure,which facilitated the occurrence of normal charge-discharge reactions at ambient temperature,although it could melt completely and fuse together within very short time periods:3 s at 110℃and 1 s at 120℃,to block off the pores of the PP substrate,thereby cutting off the ion transportation between the electrodes and interrupting the battery reaction.Consequently,the PM/PP separator exhibits very similar electrochemical performance to that of a conventional separator at ambient temperature.However,it performs a rapid thermal shutdown at an elevated temperature of^110℃,thus controlling the temperature rise and maintaining the cell in a safe status.Due to its synthetic simplicity and low cost,this separator shows promise for possible application in building safe LIBs.展开更多
In this work,a sponge-like polysulfonamide(PSA)/SiO_2 composite membrane is unprecedentedly prepared by the phase inversion method,and successfully demonstrated as a novel separator of lithium-ion batteries(LIBs).Comp...In this work,a sponge-like polysulfonamide(PSA)/SiO_2 composite membrane is unprecedentedly prepared by the phase inversion method,and successfully demonstrated as a novel separator of lithium-ion batteries(LIBs).Compared to the commercial polypropylene(PP) separator,the sponge-like PSA/SiO_2 composite possesses better physical and electrochemical properties,such as higher porosity,ionic conductivity,thermal stability and flame retarding ability.The LiCoO_2/Li half-cells using the sponge-like composite separator demonstrate superior rate capability and cyclability over those using the commercial PP separator.Moreover,the sponge-like composite separator can ensure the normal operation of LiCoO_2/Li half-cell at an extremely high temperature of 90 °C,while the commercial PP separator cannot.All these encouraging results suggest that this phase inversion based sponge-like PSA/SiO_2 composite separator is really a promising separator for high performance LIBs.展开更多
基金supported by the National Natural Science Foundation of China(22008161)Sichuan Science and Technology Program(2022YFQ0037)。
文摘With the vigorous development of the electronics industry,the consumption of lithium continues to increase,and more lithium needs to be mined to meet the development of the industry.The content of lithium in the solution is much higher than that of minerals,but the interference of impurity ions increases the difficulty of extracting lithium ions.Therefore,we prepared an imidazole-based ionic liquid(1-butyl-3-methylImidazolium bis(trifluoromethyl sulfonyl)imide)(IL)for efficient lithium extraction from aqueous solutions by solvent extraction.Using an extraction consisting of 10%IL,85% tributyl phosphate(TBP),and 5% dichloroethane and an organic to aqueous phase ratio(O/A)of 2/1,over 64.23% of Li were extracted,and the extraction rate after five-stage extraction could reach more than 96%.The addition of ammonium ions to the solution inhibited the extraction of Ni,and the separation coefficient between lithium and nickel approached infinity,showing a very perfect separation effect.Fouriertransform infrared spectroscopy and slope methods were used to analyze the changes that occurred during extraction,revealing possible extraction mechanisms.In addition,the LiCl solution generated during the preparation of ionic liquids was mixed with the stripping solution,and the battery-grade lithium carbonate was prepared by Na_(2)CO_(3) precipitation,with a purity of 99.74%.This study provides an efficient and sustainable strategy for recovering lithium from the solution.
基金supported by the Basic Science Center Program of the National Natural Science Foundation of China(NSFC)under Grant No.51788104Beijing Natural Science Foundation under Grant No.JQ19005.
文摘Ionic selectivity is of significant importance in both fundamental science and practical applications.For instance,an ion-selective material allows the passage of a particular kind of ions while blocking the others,which could be used for purification of materials.Herein,the Li-ion-selectivity of a garnet-type solid electrolyte is discussed by comparing the difference of activation energy between different ions migrating in solids.The high ion-selectivity is confirmed by harvesting high-purity metallic lithium(99.98 wt%)from low-lithium-purity sources(80 wt%)at a moderate temperature(190℃).This gives it huge potential in separating lithium with impurities especially alkali and alkali-earth elements.The cost of metallic lithium production is only 25%of the international lithium price.The proposed electrochemical metallic lithium separating method is advantageous compared with the traditional process in terms of efficiency,safety,and cost.
基金supported by the National Natural Science Foundation of China(Grant Nos.52072105,21676067)the Key R&D Program of Anhui Province(202104a05020044)+2 种基金the Anhui Provincial Natural Science Foundation(2108085J23)Science and Technology Major Project of Anhui Province(202003a05020014)the Fundamental Research Funds for the Central Universities(PA2021KCPY0028,JZ2020YYPY0109).
文摘In traditional in situ polymerization preparation for solid-state electrolytes,initiators are directly added to the liquid precursor.In this article,a novel cellulose paper-based composite separator is fabricated,which employs alumina as the inorganic reinforcing material and is loaded with polymerization initiator aluminum trifluoromethanesulfonate.Based upon this,a separator-induced in situ directional polymerization technique is demonstrated,and the extra addition of initiators into liquid precursors is no longer required.The polymerization starts from the surface and interior of the separator and extends outward with the gradually dissolving of initiators into the precursor.Compared with its traditional counterpart,the separator-induced poly(1,3-dioxolane)electrolyte shows improved interfacial contact as well as appropriately mitigated polymerization rate,which are conducive to practical applications.Electrochemical measurement results show that the prepared poly(1,3-dioxolane)solid electrolyte possesses an oxidation potential up to 4.4 V and a high Li+transference number of 0.72.After 1000 cycles at 2 C rate(340 mA g^(−1)),the assembled Li||LiFePO_(4)solid battery possesses a 106.8 mAh g^(−1)discharge capacity retention and 83.5%capacity retention ratio,with high average Coulombic efficiency of 99.5%achieved.Our work may provide new ideas for the design and application of in situ polymerization technique for solid electrolytes and solid batteries.
基金the Natural Science Foundation of Shandong Province (ZR2022QB050)the Liaocheng University Doctoral Initial Fund (318052137) for Financial Support。
文摘Boosting of rechargeable lithium metal batteries(LMBs) holds challenges because of lithium dendrites germination and high-reactive surface feature.Separators may experience structure-determined chemical deterioration and worsen Li plating-stripping behaviors when smoothly shifting from lithium-ion batteries(LIBs) to LMBs.This study precisely regulations the crystal structure of β-polypropylene and separator porous construction to investigate the intrinsic porous structure and mechanical properties determined electrochemical performances and cycling durability of LMBs.Crystal structure characterizations,porous structure analyses,and electrochemical cycling tests uncover appropriate annealing thermal stimulation concentrates β-lamellae thickness and enhances lamellae thermal stability by rearranging molecular chain in inferior β-lamellae,maximally homogenizing biaxial tensile deformation and resultant porous constructions.These even pores with high connectivity lower ion migration barriers,alleviate heterogeneous Li^(+) flux dispersion,stabilize reversible Li plating-stripping behaviors,and hinder coursing and branching of Li dendrites,endowing steady cell cycling durability,especially at higher currents due to the highlighted uncontrollable cumulation of dead Li,which offers new insights for the current pursuit of high-power density battery and fast charging technology.The suggested separator structure-chemical nature functions in ensuring cyclic cell stability and builds reliable relationships between separator structure design and practical LMBs applications.
基金supported by the Science Foundation of the National Key Laboratory of Science and Technology on Advanced Composites in Special Environmentsthe National Natural Science Foundation of China(12002109)+1 种基金the China Postdoctoral Science Foundation(2020M670898)the Heilongjiang Postdoctoral Fund(LBH-Z20060)。
文摘Separators have been gaining increasing attention to improve the performance of lithium ion batteries(LIBs),especially for high safe and long cycle life.However,commercial polyolefin separators still face the problems of rapid capacity decay and safety issues due to the poor wettability with electrolytes and low thermal stability.Herein,a novel composite separator is proposed by introducing a surfactant of sodium dodecyl thiosulfate(SDS)into the polytetrafluoroethylene(PTFE)substrate with the binder of polyacrylic acid(PAA)through the suction filtration method.The introduction of PAA/SDS enhances the adsorption energy between PTFE substrate and electrolyte through density functional theory calculations,which improves wettability and electrolyte uptake of the separator significantly.The asachieved composite separator enables the LIBs to own high Li^(+)conductivity(0.64×10^(-3)S cm^(-1))and Li^(+)transference number(0.63),further leading to a high capacity retention of 93.50%after 500 cycles at 1 C.In addition,the uniform and smooth surface morphology of Li metal employed the composite separator after cycling indicates that the lithium dendrites can be successfully inhibited.This work indicates a promising route for the preparation of a novel composite separator for high safe LIBs.
基金supported by the National Research Foundation of Korea(NRF),Government of Korea(MSIT)(2020R1A4A4079810 and 2020R1C1C1009159).
文摘Development of practical lithium(Li)metal batteries(LMBs)remains challenging despite promises of Li metal anodes(LMAs),owing to Li dendrite formation and highly reactive surface nature.Polyolefin separators used in LMBs may undergo severe mechanical and chemical deterioration when contacting with LMAs.To identify the best polyolefin separator for LMBs,this study investigated the separator-deterministic cycling stability of LMBs under practical conditions,and redefined the key influencing factors,including pore structure,mechanical stability,and chemical affinity,using 12 different commercial separators,including polyethylene(PE),polypropylene(PP),and coated separators.At extreme compression triggered by LMA swelling,isotropic stress release by balancing the machine direction and transverse direction tensile strengths was found to be crucial for mitigating cell short-circuiting.Instead of PP separators,a PE separator that possesses a high elastic modulus and a highly connected pore structure can uniformly regulate LMA swelling.The ceramic coating reinforced short-circuiting resistance,while the cycling efficiency degraded rapidly owing to the detrimental interactions between ceramics and LMAs.This study identified the design principle of separators for practical LMBs with respect to mechanical stability and chemical affinity toward LMAs by elucidating the impacts of separator modification on the cycling performance.
基金supported by the Natural Science Foundation of China(22105129)the Guangdong Basic and Applied Basic Research Foundation(2022A1515011048)the Science and Technology Innovation Commission of Shenzhen(JCYJ20200109105618137)。
文摘With the rapid development of portable technology,lithium batteries have emerged as potential candidates for high-performance energy storage systems owing to their high energy density and cycling stability.Among the key components of a lithium battery system,the separator plays a critical role as it directly influences the battery performance benchmark(cycling performance and safety).However,traditional polyolefin separators(polypropylene/polyethylene)are unable to meet the demands of highperformance and safer battery systems due to their poor electrolyte compatibility,thermal runaways,and ultimate growth of dendrites.In contrast,membranes fabricated using polybenzimidazole(PBI)exhibit excellent electrolyte wettability and outstanding thermal dimensional stability,thus holding great potential as separators for high-performance and high-safety batteries.In this paper,we present a comprehensive review of the general requirements for separators,synthesis technology for separators,and research trends focusing PBI membranes in lithium batteries to alleviate the current commercial challenges faced by conventional polyolefin separators.In addition,we discuss the future development direction for PBI battery separators by considering various factors such as production cost,ecological footprint,preparation technology,and battery component compatibility.By exploring these perspectives,we aim to promote the continued application and exploration of PBI-based materials to advance lithium battery technology.
基金financially supported by the National Key Research and Development Program of China(No.2021YFB2400300)the IPE Talent Start-up Program of Institute of Process Engineering of Chinese Academy of Sciences(Grant No.E0293507)。
文摘The absence of control over carriers transport during electrochemical cycling,accompanied by the deterioration of the solid electrolyte interphase(SEI)and the growth of lithium dendrites,has hindered the development of lithium metal batteries.Herein,a separator complexion consisting of polyacrylonitrile(PAN)nanofiber and MIL-101(Cr)particles prepared by electrospinning is proposed to bind the anions from the electrolyte utilizing abundant effective open metal sites in the MIL-101(Cr)particles to modulate the transport of non-effective carriers.The binding effect of the PANM separator promotes uniform lithium metal deposition and enhances the stability of the SEI layer and long cycling stability of ultra-high nickel layered oxide cathodes.Taking PANM as the Li||NCM96 separator enables high-voltage cycling stability,maintaining 72%capacity retention after 800 cycles at a charging and discharging rate of 0.2 C at a cut-off voltage of 4.5 V and 0°C.Meanwhile,the excellent high-rate performance delivers a specific capacity of 156.3 mA h g^(-1) at 10 C.In addition,outstanding cycling performance is realized from−20 to 60°C.The separator engineering facilitates the electrochemical performance of lithium metal batteries and enlightens a facile and promising strategy to develop fast charge/discharge over a wide range of temperatures.
基金financially supported by the National Natural Science Foundation of China(21706292)support from the Hunan Provincial Science and Technology Plan Project,China(No.2017TP1001).
文摘The practical application of lithium–sulfur(Li–S)batteries is limited by the easy dissolution of polysulfides in the electrolyte,resulting in the lithium polysulfide(LPS)shuttle effect.Several two-dimensional(2D)materials with abundant active binding sites and high surface-to-volume ratios have been developed to prepare functional separators that suppress the diffusion of polysulfides.However,the influence of modified layer thickness on Li+transport has not been considered.Herein,we synthesized individual and multilayered 2D Ti3C2Tx MXene nanosheets and used them to fabricate a series of Ti3C2Tx-PP modified separators.The separators had mass loadings ranging from 0.16 to 0.016 mg cm-2,which is the lowest value reported for 2D materials to the best of our knowledge.The corresponding reductions in thickness ranged from 1.2μm to 100 nm.LPS shuttling was effectively suppressed,even at the lowest mass loading of 0.016 mg cm-2.Suppression was due to the strong interaction between LPS intermediates and Ti atoms and hydroxyl functional groups on the separator surface.The lithium-ion diffusion coefficient increased with the reduction of Ti3C2Tx layers on the separator.Superior cycling stability and rate performance were attained when the separator with a Ti3C2Tx-PP mass loading of 0.016 mg cm-2 was incorporated into a Li–S battery.Carbon nanotubes(CNTs)were introduced into the separators to further improve the electrical and Li+ionic conductivity in the cross-plane direction of the 2D Ti3C2Txlayers.With the ultralightweight Ti3C2Tx/CNTs modified PP separator,the cell maintained a capacity of 640 m Ah g-1after 200cycles at 1C with a capacity decay of only 0.079%per cycle.
基金supported by the MOST(Grant No.2013CB934000,2014DFG71590,2011CB935902,2010DFA72760,2011CB711202,2013AA050903,2011AA11A257 and 2011AA11A254)China Postdoctoral Science Foundation(Grant No.2013M530599 and 2013M540929)+2 种基金Tsinghua University Initiative Scientific Research Program(Grant No.2010THZ08116,2011THZ08139,2011THZ01004 and 2012THZ08129)the State Key Laboratory of Automotive Safety and Energy(No.ZZ2012-011)Suzhou(Wujiang)Automotive Research Institute,Tsinghua University,Project No.2012WJ-A-01
文摘Surface chemical modification of polyolefin separators for lithium ion batteries is attempted to reduce the thermal shrinkage, which is im- portant for the battery energy density. In this study, we grafted organic/inorganic hybrid crosslinked networks on the separators, simply by grafting polymerization and condensation reaction. The considerable silicon-oxygen crosslinked heat-resistance networks are responsible for the reduced thermal shrinkage. The strong chemical bonds between networks and separators promise enough mechanical support even at high temperature. The shrinkage at 150 ℃ for 30 min in the mechanical direction was 38.6% and 4.6% for the pristine and present graft-modified separators, respectively. Meanwhile, the grafting organic-inorganic hybrid crosslink networks mainly occupied part of void in the internal pores of the separators, so the thicknesses of the graft-modified separators were similar with the pristine one. The half cells prepared with the modified separators exhibited almost identical electrochemical properties to those with the commercial separators, thus proving that, in order to enhance the thermal stability of lithium ion battery, this kind of grafting-modified separators may be a better alternative to conventional silica nanoparticle layers-coated polyolefin separators.
基金This work is supported by the National Key Research and Development Program,China(2019YFC0810703)the National Natural Science Foundation of China(22071133)the Tsinghua-Foshan Innovation Special Fund(TFISF),China(2019THFS0128).
文摘Lithium-ion batteries (LIBs)-related accidents have been reported for years and safety issues are stumbling blocks for the practical applications of lithium metal batteries (LMBs) with higher energy density. More effective strategies to shut down the battery at the early stage of thermal runaway with less side effects on the electrochemical performance are greatly desired. In this work, the core–shell structural paraffin@SiO_(2) microparticles were synthesized by in situ emulsion interfacial hydrolysis and polycondensation and the paraffin@SiO_(2)-loaded separator (PSS) was prepared by a facile filtration method. The introduction of hydrophilic silica shells in paraffin@SiO_(2) enhanced the wettability of carbonate electrolyte with the composite separator and improved the processability of soft paraffin. As a result, when used in LMBs at room temperature, the cell with PSS inside had a more uniform deposition of lithium, a much lower overpotential and a more stable electrochemical performance than the cell with the blank separator or the conventional pure paraffin-loaded separator inside. More significantly, when a heating stimulation (i.e. 115 ℃) was subjected to the cell with PSS inside, the paraffin in the core of paraffin@SiO_(2) could be released, blocking the gaps between particles and the pores in the separator and efficiently stopping the transportation of Li+ between two electrodes, resulting in the thermally-induced shutdown of the cell below the melting temperature of PE (~135 ℃) in the Celgard2325 separator. The core–shell structure of paraffin@SiO_(2) enables the maintaining of each component’s benefits while avoiding each one’s drawbacks by elaborating microstructural design. Therefore, the conventional dilemma between the electrochemcial performance and safety of LMBs could be solved in the future.
基金Supported by the National Natural Science Foundation of China (20576052) the Joint Innovation Fund of Jiangsu Province (BY2009107)
文摘The Mg2+/Li+/Cl solutions were filtrated with a commercially available DK nanofiltration membrane to investigate the possibility to enrich the lithium component.The investigation was significant as such an approach might be a competing substitute for the present lithium purification industry and the environmental protection purpose.The Donnan steric pore model(DSPM) was implemented for the prediction.The separation of Mg2+/Li+was mainly affected by the working pressure(or the permeation flux) and a limiting separation factor was found around 0.31.The effective membrane charge density was evaluated and its dependence on the permeation flux as well as the ion pattern was discussed.For predicting an actual separation of electrolytes,the experimental investigation seems necessary for the reliability and efficiency.
基金financial support provided by the National Natural Science Foundation of China(Grant No.U1806225)the National Natural Science Foundation of China(Grant No.51908092)the Joint Funds of the National Natural Science Foundation of China-Guangdong(Grant No.U1801254)。
文摘Epoxy resin powder coating has been successfully applied on the corrosion protection of magnesium lithium alloys.However,poor wear resistance and microcracks formed during the solidification have limited it extensive application.There are limited approaches to exploit such anti-corrosion and mechanical properties of magnesium lithium alloys.Herein,the epoxy resin powder coating with polydopamine modified molybdenum disulfide(MoS_(2)@PDA-EP powder coating with 0,0.1,0.2,0.5,1.0 wt.%loading)was well prepared by melt extrusion to investigate its anticorrosion performance and wear resistance.The results revealed that the addition of MoS_(2)@PDA enhanced the adhesion strength between coatings and alloys,wear resistance and corrosion protection of the powder coatings.Among them,the optimum was obtained by 0.2 wt.%MoS_(2)@PDA-EP powder coating which could be attributed to well dispersion and efficient adhesion with coating matrix.To conclude,MoS_(2)@PDA-EP powder coating is meaningfully beneficial for the anticorrosive and wear performance improvement of magnesium lithium alloys.
基金the support from the National Natural Science Foundation of China(General Program no.51874041)。
文摘As the energy density of lithium-ion batteries (LIBs) continues to increase,their safety has become a great concern for further practical large-scale applications.One of the ultimate solution of the safety issue is to develop intrinsically safe battery components,where the battery separators and liquid electrolytes are critical for the battery thermal runaway process.In this review,we summarize recent progress in the rational materials design on battery separators and liquid electrolyte towards the goal of improving the safety of LIBs.Also,some strategies for further improving safety of LIBs are also briefly outlooked.
基金financially supported by the National Natural Science Foundation of China(21931005,21871177,20172012002)the Natural Science Foundation of Shanghai(20ZR1427600)the Shanghai Science and Technology Committee(19JC1412600)。
文摘An unstable solid electrolyte interphase(SEI)and chaotic lithium ion fux are key impediments to commercial high-energy-density lithium batteries because of the uncontrolled growth of rigid lithium dendrites,which would pierce through the conventional polypropylene(PP)separator,causing short circuit and safety issues.Herein,the homogenization of lithium ion fux and the generation of stable SEI layers on lithium anodes were achieved via coating a fuorine-functionalized Ti_(3)C_(2)(F-Ti_(3)C_(2))nanosheets on PP separator(F-Ti_(3)C_(2)@PP).F-Ti_(3)C_(2)nanosheets provide abundant ions pathways to homogeneously manipulate lithium ion fux and increase the Young’s modulus and electrolyte wettability of the separators.In addition,F species derived from the F-Ti_(3)C_(2)nanosheets would promote the formation of Li F-rich SEI film.The synergistic effect contribute to the uniform lithium deposition.Symmetric Li|Li,asymmetric Li|Cu and full Li|Li Fe PO4cells incorporated with the modified separators exhibit improved electrochemical performance even under lean electrolyte conditions.This work provides a feasible strategy to improve the performance of lithium batteries through both fuoridized SEI formation and lithium ion fux manipulation.
基金supported by the National Natural Science Foundation of China(Nos.21978110,21905110,and 51772126)the Jilin Province Science and Technology Department Program(Nos.20200201187JC,20200201236JC,20190201309JC,20190101009JH and 20180201079GX)+3 种基金the Fundamental Research Funds for the Central Universities(Jilin University,JLU)the “13th five-year” Science and Technology Project of Jilin Provincial Education Department(Nos.JJKH_(2)0200407KJ,JJKH_(2)0200411KJ and JJKH_(2)0191003KJ)the Jilin Province Development and Reform Commission Program(Nos.2020C026-3 and 2019C042-1)the Jilin Province Fund for Talent Development Program(No.[2019]874)。
文摘The guided Li dendrite growth by carbon-modifying separator is believed to be an effective strategy for enhancing life of lithium metal batteries(LMBs).However,the weak adhesions,as well as the large interface impedance between the smooth separator and the carbon functional layer(CFL) lead to an easily peeling of the CFL after repetitive cycles.Herein,we propose a promising solution by an inserting thin buffer layer(TBL) to strengthen the adhesion between CFL and separator as a double modifying layer(C-TBL) of the LMBs separator,which greatly improves the stability of the CFL and provides an effective Li metal anode protection.Owing to the sufficient ionic conductivity,chemical stability and strong adhesion to the separator of the TBL,it can avoid the failure of the CFL functionality with small interface impedance.Moreover,the CFL effectively reduces localized flux of Li+ through its abundant pores.The Li/Li cell with C-TBL separator displays the Li dendrite-free and stable cycling performance for at least 1500 h.When LiFePO_(4)(LFP) is employed as the cathode electrode,the assembled full cell with C-TBL separator shows the excellent rate performance and outstanding cycling capability.Our study builds a stable Li+conducting "bridge" between the functional layer and the separator in stabilizing Li metal anode,and provides a fresh idea of the artificial separator of LMBs.
基金This work was partially supported by the National Science Fund for Distinguished Young Scholars(51625102)the National Natural Science Foundation of China(51971065)+1 种基金the Innovation Program of Shanghai Municipal Education Commission(2019-01-07-00-07-E00028)the Open Fund of Jiangsu Key Laboratory of Electrochemical Energy Storage Technologies No.EEST2019-2.
文摘Magnesium hydride, with high specific capacity, favorable voltage profile and low voltage hysteresis properties, is regarded as a promising anode for lithium storage. However, the rapid fading of capacity caused by huge volume change, low electron/ion conduction, and spontaneous agglomeration of active materials during cycling greatly limit its practical application in lithium-ion batteries. Herein, we report the synthesis of monodisperse MgH2 nanoparticles with an average particle size of <20 nm homogeneously anchored on Ti3C2 MXene sheets by bottom-up self-assembly strategy. The unique nanoarchitectures are able to efficiently enhance the lithium insertion/extraction kinetics, accelerate the electron/lithium ion transfer and buffer the strain of volume changes. More importantly, the formed F–Mg bounding between MgH2 and MXene could avoid the shedding of MgH2 nanoparticles to electrolyte during cycling, which significantly enhance the capacity, cyclability, and rate performance of magnesium hydride. Moreover, due to the high density of MXene and the synergistic effect between the MgH2 and MXene matrix, the MgH2/MXene composite with 60 wt% MgH2 delivers a superior volumetric capacity of 1092.9 mAh cm−3 at a current density of 2000 mA g^(−1) after 1000 cycles. These results highlight the great promising of MgH2/MXene composite for high performance lithium-ion batteries.
基金supported by the Natural Science Foundation of Jiangsu Province (BK20170237)National Natural Science Foundation of China (21808094 and 51871113)+1 种基金Key Research and Development Program of Xuzhou (KC17004)Startup Funding for Introduced Talents of Jiangsu Normal University (16XLR015)。
文摘Severe performance drop and fire risk due to the uneven lithium(Li) dendrite formation and growth during charge/discharge process has been considered as the major obstacle to the practical application of Li metal batteries.So inhibiting dendrite growth and producing a stable and robust solid electrolyte interface(SEI) layer are essential to enable the use of Li metal anodes.In this work,a functional lithiophilic polymer composed of chitosan(CTS),polyethylene oxide(PEO),and poly(triethylene glycol dimethacrylate)(PTEGDMA),was homogeneously deposited on a commercial Celgard separator by combining electrospraying and polymer photopolymerization techniques.The lithiophilic environment offered by the CTS-PEO-PTEGDMA layer enables uniform Li deposition and facilitates the formation of a robust homogeneous SEI layer,thus prevent the formation and growth of Li dendrites.As a result,both Li/Li symmetric cells and LiFePO4/Li full cells deliver significantly enhanced electrochemical performance and cycle life.Even after 1000 cycles,the specific capacity of the modified full cell could be maintained at65.8 mAh g^(-1), twice which of the unmodified cell(32.8 mAh g^(-1)).The long-term cycling stability in Li/Li symmetric cells,dendrite-free anodes in SEM images and XPS analysis suggest that the pulverization of the Li anode was effectively suppressed by the lithiophilic polymer layer.
基金The authors acknowledge the financial support from the National Key Research and Development Program for New Energy Vehicles(No.2016YFB0100200).
文摘Thermal runaway is the main factor contributing to the unsafe behaviors of lithium-ion batteries(LIBs)in practical applications.The application of separators for the thermal shutdown has been proven as an effective approach to protecting LIBs from thermal runaway.In this work,we developed a thermal shutdown separator by coating a thin layer of low-density polyethylene microspheres(PM)onto a commercial porous polypropylene(PP)membrane and investigated the thermal response behaviors of the as-prepared PM/PP separator in LIBs.The structural and thermal analysis results revealed that the coated PM layer had a porous structure,which facilitated the occurrence of normal charge-discharge reactions at ambient temperature,although it could melt completely and fuse together within very short time periods:3 s at 110℃and 1 s at 120℃,to block off the pores of the PP substrate,thereby cutting off the ion transportation between the electrodes and interrupting the battery reaction.Consequently,the PM/PP separator exhibits very similar electrochemical performance to that of a conventional separator at ambient temperature.However,it performs a rapid thermal shutdown at an elevated temperature of^110℃,thus controlling the temperature rise and maintaining the cell in a safe status.Due to its synthetic simplicity and low cost,this separator shows promise for possible application in building safe LIBs.
基金Supported by the funding from "135" Projects Fund of CAS-QIBEBT Director Innovation FoundationThink-Tank Mutual Fund of Qingdao Energy Storage Industry Scientific Research+3 种基金Qingdao Key Lab of Solar Energy Utilization and Energy Storage Technologythe Strategic Priority Research Program of the Chinese Academy of Sciences(XDA09010105)National Natural Science Foundation of China(51502319)Shandong Provincial Natural Science Foundation(ZR2016BQ18)
文摘In this work,a sponge-like polysulfonamide(PSA)/SiO_2 composite membrane is unprecedentedly prepared by the phase inversion method,and successfully demonstrated as a novel separator of lithium-ion batteries(LIBs).Compared to the commercial polypropylene(PP) separator,the sponge-like PSA/SiO_2 composite possesses better physical and electrochemical properties,such as higher porosity,ionic conductivity,thermal stability and flame retarding ability.The LiCoO_2/Li half-cells using the sponge-like composite separator demonstrate superior rate capability and cyclability over those using the commercial PP separator.Moreover,the sponge-like composite separator can ensure the normal operation of LiCoO_2/Li half-cell at an extremely high temperature of 90 °C,while the commercial PP separator cannot.All these encouraging results suggest that this phase inversion based sponge-like PSA/SiO_2 composite separator is really a promising separator for high performance LIBs.