RhB Adsorption Performance of Magnetic Adsorbent Fe_3O_4/RGO Composite and Its Regeneration through A Fenton-like Reaction

Adsorption is one of the most effective technologies in the treatment of colored matter containing wastewater. Graphene related composites display potential to be an effective adsorbent. However, the adsorption mechanism and their regeneration approach are still demanding more efforts. An effective magnetically separable absorbent, Fe3O4 and reduced graphene oxide(RGO) composite has been prepared by an in situ coprecipitation and reduction method. According to the characterizations of TEM, XRD, XPS, Raman spectra and BET analyses, Fe3O4 nanoparticles in sizes of 10-20 nm are well dispersed over the RGO nanosheets, resulting in a highest specific area of 296.2 m2/g. The rhodamine B adsorption mechanism on the composites was investigated by the adsorption kinetics and isotherms. The isotherms are fitting better by Langmuir model, and the adsorption kinetic rates depend much on the chemical components of RGO. Compared to active carbon, the composite shows 3.7 times higher adsorption capacity and thirty times faster adsorption rates. Furthermore,with Fe3O4 nanoparticles as the in situ catalysts, the adsorption performance of composites can be restored by carrying out a Fenton-like reaction, which could be a promising regeneration way for the adsorbents in the organic pollutant removal of wastewater.

Preparation of Chelating Polymer Grafted Magnetic Adsorbent and Its Application for Removal of Pb(Ⅱ) Ions

A novel magnetic chelating adsorbent （CPMS） with iminodiacetate functionality was prepared by polymerization of glycidyl methacrylate-iminodiacetic acid （GMA-IDA） monomer with N, N-methylenebisacrylamide as crosslinker in the presence of monodisperse magnetic silica microspheres （MS）. CPMS was characterized by IR, SEM, VSM and TGA. The experimental results revealed that MS was embedded in the gel polymer, but the morphology of CPMS was irregular. The saturation magnetization for CPMS was found to be 28.4 emu/g, and the percentage of GMA-IDA polymer grafted on MS was about 46.5%. CPMS were shown to be efficient for the removal of Pb（II） ions at pH 3.0 - 6.0, and the adsorption data obeyed the Langmuir equation with a maximum adsorption capacity of 54.4 mg？g？1 at pH 5.0. Moreover, the adsorption rate of CPMS was fast and it took about 5 minutes to achieve adsorption equilibrium in aqueous solution of lower lead ions concentration.

Magnetically modified microbial cells:A new type of magnetic adsorbents

Microbial cells, either in free or immobilized form, can be used for the preconcentration or removal of metal ions, organic and inorganic xenobiotics or biologically active compounds. Magnetic modification of these cells enables to prepare magnetic adsorbents that can be easily manipulated in difficult-to-handle samples, such as suspensions, in the presence of external magnetic field. In this review, typical examples of magnetic modifications of microbial cells are presented, as well as their possible applications for the separation of organic xenobiotics and heavy metal ions.

Recyclable hydrolyzed polymers of intrinsic microporosity-1/Fe_(3)O_(4) magnetic composites as adsorbents for selective cationic dye adsorption

Polymers of intrinsic microporosity shows great potential for dye adsorption and magnetic Fe_(3)O_(4) are easy to be separated.In this work,hydrolyzed polymers of intrinsic microporosity-1/Fe_(3)O_(4) composite adsorbents were prepared by phase inversion and hydrolysis process for cationic dye adsorption.The chemical structure and morphology of the composite adsorbents were systematically characterized by several characterization methods.Using methylene blue as the target dye,the influences of solution pH,contact time,initial dye concentration,and system temperature on the methylene blue adsorption process were investigated.The incorporation of Fe_(3)O_(4) particle into hydrolyzed polymers of intrinsic microporosity-1 endow the adsorbent with high magnetic saturation(20.7 emu·g^(–1))which allows the rapid separation of the adsorbent.Furthermore,the adsorption process was simulated by adsorption kinetics,isotherms and thermodynamics to gain insight onto the intrinsic adsorption mechanism.In addition,the composite adsorbents are able to selectively adsorb cationic dyes from mixed dyes solution.Hydrolyzed polymers of intrinsic microporosity/Fe_(3)O_(4) shows only a slight decrease for methylene blue adsorption after 10 adsorption/regeneration cycles,demonstrating the outstanding regeneration performance.The high adsorption capacity,outstanding regeneration ability,together with simple preparation method,endow the composite adsorbents great potential for selective removal of cationic dyes in wastewater system.

Application of magnetic particles modified with amino groups to adsorb copper ions in aqueous solution

A magnetic adsorbent can be easily recovered from treated water by magnetic force, without requiring further downstream treatment. In this research, amine-functionalized silica magnetite has been synthesized using N-[3-（trimethoxysilyl）propyl]-ethylenediamine （TPED） as a surface modification agent. The synthesized magnetic amine adsorbents were used to adsorb copper ions in an aqueous solution in a batch system, and the maximum adsorption was found to occur at pH 5.5± 0. 1. The adsorption equilibrium data fitted the Langmuir isotherm equation reasonably well, with a maximum adsorption capacity of 10.41 mg/g. A pseudo second-order model could best describe the adsorption kinetics, and the derived activation energy was 26.92 kJ/mol. The optimum condition to desorb Cu2＋ from NH2/SiO2/Fe304 was provided by a solution with 0.1 mol/L HNO3.

Preconcentration of chlorophenols in water samples using threedimensional graphene-based magnetic nanocomposite as absorbent

In this paper, a novel magnetic solid-phase extraction method using three-dimensional graphene-based magnetic nanocomposite as adsorbent for the preconcentration of several chlorophenols from water samples prior to high-performance liquid chromatography analysis was developed. Various experimental parameters were investigated. Under the optimum conditions, the enrichment factors of the method were in the range of 186–312, and the limit of detection（S/N = 3） was 0.10 ng/mL. The recoveries of the method were in the range between 85.1% and 101.2%. The developed method has been successfully applied to the determination of chlorophenols in environmental water samples.

Separation/degradation behavior and mechanism for cationic/anionic dyes by Ag-functionalized Fe_(3)O_(4)-PDA core-shell adsorbents

High-performance adsorbents have been well-studied for the removal of organic dye pollutants to promote environment remediation.In this study,an Ag nanoparticle-functionalized Fe_(3)O_(4)-PDA nanocomposite adsorbent(PDA-Fe_(3)O_(4)-Ag)was synthesized,and the adsorption/separation performance of commonly used cationic and anionic organic dyes by the PDA-Fe_(3)O_(4)-Ag adsorbent were assessed.Overall,PDA-Fe_(3)O_(4)-Ag exhibited a significantly higher adsorption capacity for cationic dyes compared to anionic dyes,the highest of which was more than 110.0 mg/g(methylene blue(MB)),which was much higher than not only the adsorption capacities of the anionic dyes in this study but also other dye adsorption capacities reported in the literature.The dye adsorption kinetics data fitted well to both the pseudo second-order kinetics model and the Langmuir isotherm model,suggesting a monolayer-chemisorption-dominated adsorption mode.Thermodynamics analysis indicated that the adsorption process was both endothermic and spontaneous.Furthermore,the PDAFe_(3)O_(4)-Ag adsorbent achieved high photodegradation removal rates of the dyes,especially neutral red(NR)and methyl orange(MO),which were 91.2%and 87.5%,respectively.With the addition of PDA-Fe_(3)O_(4)-Ag,the degradation rate constants of NR and MO increased from 0.08×10^(−2)and 0 min^(−1)to 2.11×10^(−2)and 1.73×10^(−2)min−1,respectively.The high adsorption and photocatalytic degradation performance of the PDA-Fe_(3)O_(4)-Ag adsorbent make it an excellent candidate for removing cationic and anionic dyes from the industrial effluents.

Nanomotor-based adsorbent for blood Lead(II)removal in vitro and in pig models

Blood lead(Pb(II))removal is very important but challenging.The main difficulty of blood Pb(II)removal currently lies in the fact that blood Pb(II)is mainly complexed with hemoglobin(Hb)inside the red blood cells(RBCs).Traditional blood Pb(II)removers are mostly passive particles that do not have the motion ability,thus the efficiency of the contact between the adsorbent and the Pb(II)-contaminated Hb is relatively low.Herein,a kind of magnetic nanomotor adsorbent with movement ability under alternating magnetic field based on Fe3O4 nanoparticle modified with meso-2,3-dimercaptosuccinic acid(DMSA)was prepared and a blood Pb(II)removal strategy was further proposed.During the removal process,the nanomotor adsorbent can enter the RBCs,then the contact probability between the nanomotor adsorbent and the Pb(II)-contaminated Hb can be increased by the active movement of nanomotor.Through the strong coordination of functional groups in DMSA,the nanomotor adsorbent can adsorb Pb(II),and finally be separated from blood by permanent magnetic field.The in vivo extracorporeal blood circulation experiment verifies the ability of the adsorbent to remove blood Pb(II)in pig models,which may provide innovative ideas for blood heavy metal removal in the future.