Design Optimization of Permanent Magnet Eddy Current Coupler Based on an Intelligence Algorithm

The permanent magnet eddy current coupler(PMEC)solves the problem of flexible connection and speed regulation between the motor and the load and is widely used in electrical transmission systems.It provides torque to the load and generates heat and losses,reducing its energy transfer efficiency.This issue has become an obstacle for PMEC to develop toward a higher power.This paper aims to improve the overall performance of PMEC through multi-objective optimization methods.Firstly,a PMEC modeling method based on the Levenberg-Marquardt back propagation(LMBP)neural network is proposed,aiming at the characteristics of the complex input-output relationship and the strong nonlinearity of PMEC.Then,a novel competition mechanism-based multi-objective particle swarm optimization algorithm(NCMOPSO)is proposed to find the optimal structural parameters of PMEC.Chaotic search and mutation strategies are used to improve the original algorithm,which improves the shortcomings of multi-objective particle swarm optimization(MOPSO),which is too fast to converge into a global optimum,and balances the convergence and diversity of the algorithm.In order to verify the superiority and applicability of the proposed algorithm,it is compared with several popular multi-objective optimization algorithms.Applying them to the optimization model of PMEC,the results show that the proposed algorithm has better comprehensive performance.Finally,a finite element simulation model is established using the optimal structural parameters obtained by the proposed algorithm to verify the optimization results.Compared with the prototype,the optimized PMEC has reduced eddy current losses by 1.7812 kW,increased output torque by 658.5 N·m,and decreased costs by 13%,improving energy transfer efficiency.

Control of magnetic levitation positioning stage with an eddy current damper

To enhance the system damping,a permanent magnet set which served as an eddy current damper was added to the magnetic levitation positioning stage which consists of a moving table,four Halbach permanent magnetic arrays,four stators and displacement sensors.The dynamics model of this stage was a complex nonlinear,strong coupling system which made the control strategy to be a focus research.The nonlinear controller of the system was proposed based on the theory of differential geometry.Both simulation and experimental results show that either the decoupling control of the movement can be realized in horizontal and vertical directions,and the control performance was improved by the damper,verifying the validity and efficiency of this method.

Screening-current-induced magnetic fields and strains in a compact REBCO coil in self field and background field

REBa_(2)Cu_(3)O_(7−x)(REBCO)coated conductors,owing to its high tensile strength and current‐carrying ability in a background field,are widely regarded a promising candidate in high‐field applications.Despite the great potentials,recent studies have highlighted the challenges posed by screening currents,which are featured by a highly nonuniform current distribution in the superconducting layer.In this paper,we report a comprehensive study on the behaviors of screening currents in a compact REBCO coil,specifically the screeningcurrent‐induced magnetic fields and strains.Experiments were carried out in the self‐generated magnetic field and a background field,respectively.In the self‐field condition,the full hysteresis of the magnetic field was obtained by applying current sweeps with repeatedly reversed polarity,as the nominal center field reached 9.17 T with a maximum peak current of 350 A.In a background field of 23.15 T,the insert coil generated a center field of 4.17 T with an applied current of 170 A.Ultimately,a total center field of 32.58 T was achieved before quench.Both the sequential model and the coupled model considering the perpendicular field modification due to conductor deformation are applied.The comparative study shows that,for this coil,the electromagnetic–mechanical coupling plays a trivial role in self‐field conditions up to 9 T.In contrast,with a high axial field dominated by the background field,the coupling effect has a stronger influence on the predicted current and strain distributions.Further discussions regarding the role of background field on the strains in the insert suggest potential design strategies to maximize the total center field.

Phonon-Assisted Spin Current in Single Molecular Magnet Junctions

Owing to the bistable character of the single molecular magnet （SMM）, it can generate 100% spin-polarized currents even connected with normal （N） leads. In this work, we study the phonon-assisted spin current in N- SMM-N systems. We mainly focus on the interplay of SMM＇s bistable character and electron-phonon coupling. It is found that when SMM is trapped in one of the lowest bistable states, it can generate phonon-assisted spin- polarized currents. At the up-spin transport channel, it is accompanied by a phonon-assisted up-spin current, while at the down-spin transport channel, it is accompanied by a phonon-assisted down-spin current.

Analysis Magnetization Current of Harmonic Phenomena and Power Factor as Indicators of Core Saturation at Transformer 3-Phase

Saturation is a condition in which the magnets are fully transformer cores and generate maximum magnetic flux. Some parts affect the resilience and create distortions that can harm the heart. Core saturation can also increase the temperature and magnetization current transformer. In this study, we proposed a measurement method to obtain the necessary parameters to calculate a reliable indicator of the state of the transformer core saturation. The main effects of nonlinear flow in the transformer core are saturation, eddy current and hysteresis. In saturation, the core transformer is as a source of generating harmonic currents, some of which will flow directly to the primary and secondary windings. The method is based on the magnetization current, the phenomenon of harmonics and power factor is evaluated by measuring the no-load current at three-phase transformer, with a high magnetic flux density imposed. Measurements were taken at each phase of the transformer core. The transformer is connected to a variable voltage variable frequency (VVVF) as a voltage source and the investigation carried out at various flux densities. The results showed that the magnetization current and harmonic phenomena increased significantly when the high magnetic flux density and vice versa injected with power factor declined sharply. This phenomenon can be used as an indication of saturation of the 3-phase transformer core.

An Inquiry into Two Intriguing Values of the Critical Current Density of Bi-2212

The empirically reported values of the critical current density (jc) of Bi-2212 as 2.4 × 105 (jc1;Sample 1) and 1.0 × 106 A/cm2 (jc2;Sample 2) are intriguing because both of them correspond to the same values of the temperature T = 4.2 K and the applied magnetic field H = 12 × 104 G. This difference is conventionally attributed to such factors—not all of which are quantifiable—as the geometry, dimensions and the nature of dopants and the manners of preparation of the samples which cause their granular structures, grain boundaries, alignment of the grains and so on to differ. Based on the premise that the chemical potential μ subsumes most of these features, given herein is a novel explanation of the said results in terms of the values of μ of the two samples. This paper revisits the problem that was originally addressed in [Malik G.P., Varma V.S. (2020) WJCMP, 10, 53-70] in the more accurate framework of a subsequent paper [Malik G.P., Varma V.S. (2021) JSNM, 34, 1551-1561]. Besides, it distinguishes between the contributions of the electro-electron (e-e) and the hole-hole (h-h) pairs to jc—a feature to which no heed was paid earlier. The essence of our findings is that the jcs of the two samples differ because they are characterized by different values of the primary variables μi and , where is the effective mass of a charge-carrier and me is the free-electron mass and i = 1 and 2 denote Sample 1 and Sample 2, respectively. In the scenario of the charge-carriers being predominantly h-h pairs, the values of these parameters are estimated to be: μ1 ≈ 12.3 meV, η1 ≈ 0.58;μ2 ≈ 22.7 meV, η2 ≈ 0.94. Following from these and similar estimates when the charge-carriers are e-e pairs, given below for each sample are the detailed results for the values of the secondary variables viz. the number density of the charge-carriers and their critical velocity, the number of occupied Landau levels and the magnetic interaction parameter.

Solar Flare Activity and Variability of Electric Current Helicity

Recent study using Huairou vector magnetograph data shows that durlug flare activity, the current helicity exhibits rapid and substantial variations and, in some cases, a recovering phase. We considered various representative the magnetic configurations. First, interacting twisted magnetic flux tubes are analyzed separately for positive, negative and mixed-sign helicity regions. The results show that the helicity during flares decreases in positive-sign, and increases in negative-sign regions. Then, flaring arcade also shows that the magnitude of the helicity decreases after flares. We also investigated current sheets formed by sheared magnetic field and showed that the current helicity (with either positive and negative signs) vanishes after reconnection. The emergence of twisted flux tubes which can trigger flares may be another source of flare-associated variability of current helicity. We demonstrate the relevance of current helicity to the description of flare activity by comparing its variation with that of shear angle in the active region AR 6891.

Clinical efficacies of treating refractory insomnia patients with estazolam plus alternating current magnetic field

As one of common physical and mental ailments, insomnia may cause serious adverse effects on a patient＇s daily life. And serious accidents occur in long-term cases.1 Despite comprehensive treatments, 9.38%-17.0% of the treated insomniacs fail to benefit at all. Thus the term of ＂refractory insomnia＂ has been coined.24 At present, there is no literature reporting the roles of estazolam plus alternating current magnetic field （ACMF） for treating insomnia. In the present study, estazolam plus ACMF was employed for the patients with refractory insomnia so as to explore the clinical efficacies of such a combined modality.

Non-invasive electrical brain stimulation:from acute to late-stage treatment of central nervous system damage

Non-invasive brain current stimulation（NIBS） is a promising and versatile tool for inducing neuroplasticity,protection and functional rehabilitation of damaged neuronal systems.It is technically simple,requires no surgery,and has significant beneficial effects.However,there are various technical approaches for NIBS which influence neuronal networks in significantly different ways.Transcranial direct current stimulation（t DCS）,alternating current stimulation（ACS） and repetitive transcranial magnetic stimulation（r TMS） all have been applied to modulate brain activity in animal experiments under normal and pathological conditions.Also clinical trials have shown that t DCS,r TMS and ACS induce significant behavioural effects and can – depending on the parameters chosen – enhance or decrease brain excitability and influence performance and learning as well as rehabilitation and protective mechanisms.The diverse phaenomena and partially opposing effects of NIBS are not yet fully understood and mechanisms of action need to be explored further in order to select appropriate parameters for a given task,such as current type and strength,timing,distribution of current densities and electrode position.In this review,we will discuss the various parameters which need to be considered when designing a NIBS protocol and will put them into context with the envisaged applications in experimental neurobiology and medicine such as vision restoration,motor rehabilitation and cognitive enhancement.

Anisotropic transport properties in the phase-separated La_(0.67)Ca_(0.33)MnO_3/NdGaO_3 (001) films

The anisotropic transport property was investigated in a phase separation La（0.67）Ca（0.33）MnO3（LCMO） film grown on（001）-oriented Nd GaO3（NGO） substrate. It was found that the resistivity along the b-axis is much higher than that along the a-axis. Two resistivity peaks were observed in the temperature dependent measurement along the b-axis, one located at 91 K and the other centered at 165 K. Moreover, we also studied the response of the resistivities along the two axes to various electric currents, magnetic fields, and light illuminations. The resistivities along the two axes are sensitive to the magnetic field. However, the electric current and light illumination can influence the resistivity along the b-axis obviously, but have little effect on the resistivity along the a-axis. Based on these results, we believe that an anisotropicstrain-controlled MnO6 octahedra shear-mode deformation may provide a mechanism of conduction filaments paths along the a-axis, which leads to the anisotropic transport property.

Observational Features of Large-Scale Structures as Revealed by the Catastrophe Model of Solar Eruptions

Large-scale magnetic structures are the main carrier of major eruptions in the solar atmosphere. These structures are rooted in the photosphere and are driven by the unceasing motion of the photospheric material through a series of equilibrium configurations. The motion brings energy into the coronal magnetic field until the system ceases to be in equilibrium. The catastrophe theory for solar eruptions indicates that loss of mechanical equilibrium constitutes the main trigger mechanism of major eruptions, usually shown up as solar flares, eruptive prominences, and coronal mass ejections （CMEs）. Magnetic reconnection which takes place at the very beginning of the eruption as a result of plasma instabilities/turbulence inside the current sheet, converts magnetic energy into heating and kinetic energy that are responsible for solar flares, and for accelerating both plasma ejecta （flows and CMEs） and energetic particles. Various manifestations are thus related to one another, and the physics behind these relationships is catastrophe and magnetic reconnection. This work reports on recent progress in both theoretical research and observations on eruptive phenomena showing the above manifestations. We start by displaying the properties of large-scale structures in the corona and the related magnetic fields prior to an eruption, and show various morphological features of the disrupting magnetic fields. Then, in the framework of the catastrophe theory, we look into the physics behind those features investigated in a succession of previous works, and discuss the approaches they used.

Performance Study of a Self-Excitation Dual Stator Winding Induction Generator for Renewable Distributed Generation Systems

Renewable power generation is a suitable technology used to deliver energy locally to customers especially in remote regions. Wind energy based on induction generator situates in a foreground position in the total energy produced using renewable sources. In the last few decades, a new self- excitation generator was based on multi-stator induction strongly emerges. This article presents a systematic modelling, a detailed analysis and the performance analysis of self-excitation dual stator winding induction generator (SE-DSWIG). The modelling of the SE-DSWIG was done with taking in account the common mutual leakage inductance between stators and the magnetizing inductance, which played a principal role in the stabilization of the output voltage in the steady state. The generator feeds the end user emulated by an inductive-resistive load. In order to simulate the weather conditions’ variation, a step change of the prime mover speed was applied on the SE-DSWIG. A passive series and shunt compensator was used to mitigate the voltage sag and swell appeared in the power system due to wind variation and the lack of reactive power consumed by the inductive load.

Simulation of Secondary Electron and Backscattered Electron Emission in A6 Relativistic Magnetron Driven by Different Cathode

Prticle-in-cell（PIC） simulations demonstrated that,when the relativistic magnetron with diffraction output（MDO） is applied with a 410 kV voltage pulse,or when the relativistic magnetron with radial output is applied with a 350 kV voltage pulse,electrons emitted from the cathode with high energy will strike the anode block wall.The emitted secondary electrons and backscattered electrons affect the interaction between electrons and RF fields induced by the operating modes,which decreases the output power in the radial output relativistic magnetron by about 15%（10%for the axial output relativistic magnetron）,decreases the anode current by about 5%（5%for the axial output relativistic magnetron）,and leads to a decrease of electronic efficiency by 8%（6%for the axial output relativistic magnetron）.The peak value of the current formed by secondary and backscattered current equals nearly half of the amplitude of the anode current,which may help the growth of parasitic modes when the applied magnetic field is near the critical magnetic field separating neighboring modes.Thus,mode competition becomes more serious.

Improving the efficiency of magnetic coupling energy transfer byetching fractal patterns in the shielding metals

Thin metal sheets are often located in the coupling paths of magnetic coupling energy transfer(MCET) systems. Eddy currents in the metals reduce the energy transfer efficiency and can even present safety risks. This paper describes the use of etched fractal patterns in the metals to suppress the eddy currents and improve the efficiency. Simulation and experimental results show that this approach is very effective. The fractal patterns should satisfy three features, namely, breaking the metal edge, etching in the high-intensity magnetic field region, and etching through the metal in the thickness direction. Different fractal patterns lead to different results. By altering the eddy current distribution, the fractal pattern slots reduce the eddy current losses when the metals show resistance effects and suppress the induced magnetic field in the metals when the metals show inductance effects. Fractal pattern slots in multilayer high conductivity metals(e.g., Cu) reduce the induced magnetic field intensity significantly. Furthermore, transfer power, transfer efficiency, receiving efficiency, and eddy current losses all increase with the increase of the number of etched layers. These results can benefit MCET by efficient energy transfer and safe use in metal shielded equipment.

Therapeutic Efficacy of Neurostimulation for Depression:Techniques, Current Modalities, and Future Challenges

Depression is the most prevalent debilitating mental illness; it is characterized as a disorder of mood, cognitive function, and neurovegetative function. About one in ten individuals experience depression at some stage of their lives. Antidepressant drugs are used to reduce the symptoms but relapse occurs in ~ 20% of patients. However, alternate therapies like brain stimulation techniques have shown promising results in this regard. This review covers the brain stimulation techniques electroconvulsive therapy, transcranial direct current stimulation, repetitive transcranial magnetic stimulation, vagus nerve stimulation, and deep brain stimulation, which are used as alternatives to antide- pressant drugs, and elucidates their research and clinical outcomes.

Analysis on the effectiveness of decoupling capacitor on mitigating radiated emission from power ground planes by BEM

The radiation emission （RE） of multilayer primed circuit board （PCB） will cause electromagnetic compatibility problem. An efficient numerical method for evaluating the effectiveness of decoupling capacitors in reducing RE from power ground （P/G） planes in PCB was presented. A two-dimensional boundary-element method （BEM） was used to establish the radiation model. Then, the RE was calculated by equivalent magnetic current of edge field around P/G planes. Furthermore, the radiation and input impedance of P/G planes mounted decoupling capacitors were calculated for frequency up to 5 GHz The results were compared to those of the case without decoupling capacitors. It shows that the decoupling capacitors can effectively decrease RE except for anti-resonant frequency. At higher frequencies, the decoupling effectiveness mainly depends on the parasitic inductance of capacitor pin rather than the value.

IEC61850 standard-based harmonic blocking scheme for power transformers

Transformer Differential and overcurrent schemes are traditionally used as main and backup protection respectively. The differential protection relay (SEL487E) has dedicated harmonic restraint function which blocks the relay tripping during the transformer magnetizing inrush conditions. However, the backup overcurrent relay (SEL751A) applied to the transformer protection does not have harmonic restraint element and trip the overcurrent relay during the inrush conditions. Therefore, major contribution of this research work is the developed harmonic blocking scheme for transformer which uses element (87HB) of the transformer differential relay (SEL487E) to send an IEC61850 GOOSE-based harmonic blocking signal to the backup overcurrent relay (SEL751A) to inhibit from tripping during the transformer magnetizing inrush current conditions. The simulation results proved that IEC61850 standard-based protection scheme is faster than the hardwired signals. Therefore, the speed and reliability of the transformer scheme are improved using the IEC61850 standard-based GOOSE applications.