Heat transfer and deformation of initial solidification shell in soft contact continuous casting mold under high frequency electromagnetic field were analyzed using numerical simulation method; the relative electromag...Heat transfer and deformation of initial solidification shell in soft contact continuous casting mold under high frequency electromagnetic field were analyzed using numerical simulation method; the relative electromagnetic parameters were obtained from the previous studies. Owing to the induction heating of a high frequency electromagnetic field （20 kHz）, the thickness of initial solidification shell decreases, and the temperature of strand surface and slit copper mold increases when compared with the case without the electromagnetic filed. The viscosity of flux de- creases because of the induction heating of the high frequency electromagnetic field, and the dimension of the flux channel increases with electromagnetic pressure; thus, the deformation behavior of initial solidification shell was different before and after the action of high frequency electromagnetic field. Furthermore, the abatement mechanism of oscillation marks under high frequency electromagnetic field was explained.展开更多
Using molten Pb-Sn-Bi alloy, the meniscus shape under high frequency magnetic field of φ100 mm round billet caster was investigated. The effect of some parameters on meniscus shape was studied. The results show that ...Using molten Pb-Sn-Bi alloy, the meniscus shape under high frequency magnetic field of φ100 mm round billet caster was investigated. The effect of some parameters on meniscus shape was studied. The results show that for a mold with 12 segments, the meniscus shape is relatively stable. With increasing power input, the menis- cus height increases with intensification of fluctuation. For the given caster, the reasonable power input is about 70 kW. The coil should be near to the top of mold and/or the initial meniscus should be near to the center of the coil. The lower the frequency, the higher is the meniscus height. With increasing frequency, the free surface is more flattened and meniscus becomes more stable. In practice, the power input should be increased simultaneously with frequency. The optimal frequency is about 20 kHz.展开更多
In this paper, coupling the quasi-3D numerical simulation of electromagnetic field and the experiments of continuous casting with soft-contacted mould with some metals such as tin, aluminum, copper and steel, the elec...In this paper, coupling the quasi-3D numerical simulation of electromagnetic field and the experiments of continuous casting with soft-contacted mould with some metals such as tin, aluminum, copper and steel, the electromagnetic characteristics of continuous casting with soft-contacted mould is analyzed. It is shown that the electromagnetic pressure on the surface of billet is increasing with the rising of power frequency as a logarithmically parabolic function, with that of electric conductivity of billet as a power junction, and with that of the current in inductor as a parabolic junction.展开更多
Coupling the quasi 3D numerical simulation of the electromagnetic field and the experiments with some metals, a series of phenomena in the processes of continuous casting with soft contacted mould was analyzed. Some t...Coupling the quasi 3D numerical simulation of the electromagnetic field and the experiments with some metals, a series of phenomena in the processes of continuous casting with soft contacted mould was analyzed. Some theoretical and experimental models were presented, from which following results were obtained. 1) The electromagnetic force is related with electric conductivity of billet as a power function to 0.4. 2) The heat transfer between billet and mould is related with the contacting pressure, and it is a linear function for tin billet approximately. 3) The distance between initial solidification point and meniscus in billet is related with the surface magnetic flux density as a fourth root function. 4) The temperature gradient in the initial solidifying shell is reduced, which can decrease the tendency of hot tearing on the surface of billet, and increase the equiaxed crystal zone in billet. 5) The stronger the magnetic flux density is, the more shallow and the thinner the oscillation mark on the surface of billet is. 6) The depth of oscillation mark on the billet cast by the soft contacted mould can be reduced to about 10% in comparison with that on the billets cast by traditional mould. 7) In non dimensional condition, the average depth of the oscillation marks on the billets cast by the soft contacted mould decreases with increasing magnetic flux density on there as a complementary error function. [展开更多
Electromagnetic casting technology became maturity and gained wide applications in steel-making and aluminum casting, which is still immature in copper casting. Electromagnetic continuous casting with soft-contact mol...Electromagnetic casting technology became maturity and gained wide applications in steel-making and aluminum casting, which is still immature in copper casting. Electromagnetic continuous casting with soft-contact mold was employed to produce copper round billet with high density. At the same time, in this paper, a mathematical model of the electromagnetic field in the soft-contact mold was built on the base of the vector potential method, then it was solved by the ANSYS commercial FEM software. Current and frequency was altered in the course of operation so as to find out how they effect the magnetic field distributing. Its accuracy was verified by the measurement result of the electromagnetic field in the mold without billet. By this model, the effect of excitation current on field was gained, which set up a certainty foundation for more research.展开更多
The distribution of the magnetic flux density in a soft-contact electromagnetic continuous casting （EMCC） rectangular mold was investigated. The experimental results show that with an increase in electric power, the...The distribution of the magnetic flux density in a soft-contact electromagnetic continuous casting （EMCC） rectangular mold was investigated. The experimental results show that with an increase in electric power, the magnetic flux density increases. The position where the maximum magnetic flux density appears will shift up when the coil moves to the top of the mold. At the same time, the maximum magnetic flux density will increase and the effective acting range of electromagnetic pressure will widen. As a result, in practice, the coil should be placed near the top part of the mold. The meniscus should be controlled near the top part of the coil, as this not only remarkably improves the billet surface quality but also saves energy. With the same electric power input, the higher the frequency, the lower the magnetic flux density.展开更多
To design a power source system and mold for electromagnetic soft-contact continuous casting process and to theoretically estimate the heat losses from the charges and the system power, the effect of structure paramet...To design a power source system and mold for electromagnetic soft-contact continuous casting process and to theoretically estimate the heat losses from the charges and the system power, the effect of structure parameters on system power and magnetic flux density distribution was calculated using finite element method. The results show that as for electromagnetic soft-contact continuous casting system with partial-segment type mold, the power consumption is much more than that with a full-segment type mold; about 62% of electric power is dissipated in the mold, and the effective acting range of magnetic field is relatively narrow. Optimizing mold structure is a crucial measure of remarkably reducing mold power consumption and saving electric energy. Increasing slit number, width, and length can remarkably increase the magnetic flux density in the mold and can reduce the electric energy consumption. Among structure parameters, slit number and slit width are relatively more effective to reduce energy consumption. For a round billet electromagnetic continuous casting system with diameter of 178 ram, the reasonable slit number, width, and length are about 24--32, 0. 5--1.0 mm, and 160 mm, respectively.展开更多
A three-dimensional mathematical model was established to investigate the behavior of molten steel flow and steel/slag interface with different processes and electromagnetic parameters under two different static magne...A three-dimensional mathematical model was established to investigate the behavior of molten steel flow and steel/slag interface with different processes and electromagnetic parameters under two different static magnetic field configurations [ruler-type electromagnetic brake （EMBr ruler） and vertical electromagnetic brake （V-EMBr）] in a continuous casting mold. The results showed that the brake effect of EMBr ruler is significantly influenced by its configuration parameters, the distance between the pole and bottom of the submerged entry nozzle （SEN）, and the port angle of the SEN outlet; therefore, it is not helpful to depress the diffusion of jet flow along the thickness direction of mold. For a constant SEN depth and port angle, there is a reasonable pole position （P = 0 mm） where the pole simultaneously covers three key zones, i.e., the jet flow impact zone and the upward and downward backflow zones. For V-EMBr, the magnetic field can simultaneously cover the three key zones and depress the diffusion of jet flow along the casting and thickness directions of the mold. Both the meniscus height and the impact intensity of the jet flow can be obviously depressed by V-EMBr even if the SEN depth and port angle have changed in the continuous casting process.展开更多
基金Item Sponsored by National Natural Science Foundation of China (59734080)
文摘Heat transfer and deformation of initial solidification shell in soft contact continuous casting mold under high frequency electromagnetic field were analyzed using numerical simulation method; the relative electromagnetic parameters were obtained from the previous studies. Owing to the induction heating of a high frequency electromagnetic field （20 kHz）, the thickness of initial solidification shell decreases, and the temperature of strand surface and slit copper mold increases when compared with the case without the electromagnetic filed. The viscosity of flux de- creases because of the induction heating of the high frequency electromagnetic field, and the dimension of the flux channel increases with electromagnetic pressure; thus, the deformation behavior of initial solidification shell was different before and after the action of high frequency electromagnetic field. Furthermore, the abatement mechanism of oscillation marks under high frequency electromagnetic field was explained.
文摘Using molten Pb-Sn-Bi alloy, the meniscus shape under high frequency magnetic field of φ100 mm round billet caster was investigated. The effect of some parameters on meniscus shape was studied. The results show that for a mold with 12 segments, the meniscus shape is relatively stable. With increasing power input, the menis- cus height increases with intensification of fluctuation. For the given caster, the reasonable power input is about 70 kW. The coil should be near to the top of mold and/or the initial meniscus should be near to the center of the coil. The lower the frequency, the higher is the meniscus height. With increasing frequency, the free surface is more flattened and meniscus becomes more stable. In practice, the power input should be increased simultaneously with frequency. The optimal frequency is about 20 kHz.
文摘In this paper, coupling the quasi-3D numerical simulation of electromagnetic field and the experiments of continuous casting with soft-contacted mould with some metals such as tin, aluminum, copper and steel, the electromagnetic characteristics of continuous casting with soft-contacted mould is analyzed. It is shown that the electromagnetic pressure on the surface of billet is increasing with the rising of power frequency as a logarithmically parabolic function, with that of electric conductivity of billet as a power junction, and with that of the current in inductor as a parabolic junction.
文摘Coupling the quasi 3D numerical simulation of the electromagnetic field and the experiments with some metals, a series of phenomena in the processes of continuous casting with soft contacted mould was analyzed. Some theoretical and experimental models were presented, from which following results were obtained. 1) The electromagnetic force is related with electric conductivity of billet as a power function to 0.4. 2) The heat transfer between billet and mould is related with the contacting pressure, and it is a linear function for tin billet approximately. 3) The distance between initial solidification point and meniscus in billet is related with the surface magnetic flux density as a fourth root function. 4) The temperature gradient in the initial solidifying shell is reduced, which can decrease the tendency of hot tearing on the surface of billet, and increase the equiaxed crystal zone in billet. 5) The stronger the magnetic flux density is, the more shallow and the thinner the oscillation mark on the surface of billet is. 6) The depth of oscillation mark on the billet cast by the soft contacted mould can be reduced to about 10% in comparison with that on the billets cast by traditional mould. 7) In non dimensional condition, the average depth of the oscillation marks on the billets cast by the soft contacted mould decreases with increasing magnetic flux density on there as a complementary error function. [
文摘Electromagnetic casting technology became maturity and gained wide applications in steel-making and aluminum casting, which is still immature in copper casting. Electromagnetic continuous casting with soft-contact mold was employed to produce copper round billet with high density. At the same time, in this paper, a mathematical model of the electromagnetic field in the soft-contact mold was built on the base of the vector potential method, then it was solved by the ANSYS commercial FEM software. Current and frequency was altered in the course of operation so as to find out how they effect the magnetic field distributing. Its accuracy was verified by the measurement result of the electromagnetic field in the mold without billet. By this model, the effect of excitation current on field was gained, which set up a certainty foundation for more research.
基金ItemSponsored by National Natural Science Foundation of China (50274203) , National High Technology Research andDevelopment Programof China (2001AA337040) and National Fundamental Research and Development Plan of China(G1998061510)
文摘The distribution of the magnetic flux density in a soft-contact electromagnetic continuous casting （EMCC） rectangular mold was investigated. The experimental results show that with an increase in electric power, the magnetic flux density increases. The position where the maximum magnetic flux density appears will shift up when the coil moves to the top of the mold. At the same time, the maximum magnetic flux density will increase and the effective acting range of electromagnetic pressure will widen. As a result, in practice, the coil should be placed near the top part of the mold. The meniscus should be controlled near the top part of the coil, as this not only remarkably improves the billet surface quality but also saves energy. With the same electric power input, the higher the frequency, the lower the magnetic flux density.
基金Item Sponsored by National Natural Science Foundation of China(50274203)National High Technology Research and Development Program of China(2001AA337040)
文摘To design a power source system and mold for electromagnetic soft-contact continuous casting process and to theoretically estimate the heat losses from the charges and the system power, the effect of structure parameters on system power and magnetic flux density distribution was calculated using finite element method. The results show that as for electromagnetic soft-contact continuous casting system with partial-segment type mold, the power consumption is much more than that with a full-segment type mold; about 62% of electric power is dissipated in the mold, and the effective acting range of magnetic field is relatively narrow. Optimizing mold structure is a crucial measure of remarkably reducing mold power consumption and saving electric energy. Increasing slit number, width, and length can remarkably increase the magnetic flux density in the mold and can reduce the electric energy consumption. Among structure parameters, slit number and slit width are relatively more effective to reduce energy consumption. For a round billet electromagnetic continuous casting system with diameter of 178 ram, the reasonable slit number, width, and length are about 24--32, 0. 5--1.0 mm, and 160 mm, respectively.
基金This work was financially supported by the National Natural Science Foundation of China （No. 51574083） and the Program of Introducing Talents of Discipline to Universities （The 111 Project of China, No. B07015）. The authors would also like to thank the referees for their work which has contributed to this paper.
文摘A three-dimensional mathematical model was established to investigate the behavior of molten steel flow and steel/slag interface with different processes and electromagnetic parameters under two different static magnetic field configurations [ruler-type electromagnetic brake （EMBr ruler） and vertical electromagnetic brake （V-EMBr）] in a continuous casting mold. The results showed that the brake effect of EMBr ruler is significantly influenced by its configuration parameters, the distance between the pole and bottom of the submerged entry nozzle （SEN）, and the port angle of the SEN outlet; therefore, it is not helpful to depress the diffusion of jet flow along the thickness direction of mold. For a constant SEN depth and port angle, there is a reasonable pole position （P = 0 mm） where the pole simultaneously covers three key zones, i.e., the jet flow impact zone and the upward and downward backflow zones. For V-EMBr, the magnetic field can simultaneously cover the three key zones and depress the diffusion of jet flow along the casting and thickness directions of the mold. Both the meniscus height and the impact intensity of the jet flow can be obviously depressed by V-EMBr even if the SEN depth and port angle have changed in the continuous casting process.
文摘为了验证两段式软接触电磁连铸结晶器的透磁效果,测试了两段式结晶器内部的磁感应强度及弯月面高度,并与传统结品器进行比较,结果表明:(1)两段式结晶器的透磁效果随结晶器壁厚的减小而增强,当结晶器的壁厚为5mm时,两段式结晶器内部的磁感应强度比传统结晶器增大71.3%;(2)两段式结晶器内部的磁感应强度随电源功率和线圈位置的提高而增强;(3)随电源功率的增加,两段式结晶器内金属液的弯月面高度随之增大,电源功率为10、20和30 kW时对应的弯月面高度分别为2.9、4.7和8.2 mm.
