Liquid phase epitaxy （LPE） is a mature technology. Early experiments on single magnetic crystal films fabricated by LPE were focused mainly on thick films for microwave and magneto-optical devices. The LPE is an exc...Liquid phase epitaxy （LPE） is a mature technology. Early experiments on single magnetic crystal films fabricated by LPE were focused mainly on thick films for microwave and magneto-optical devices. The LPE is an excellent way to make a thick film, low damping magnetic garnet film and high-quality magneto-optical material. Today, the principal challenge in the applied material is to create sub-micrometer devices by using modern photolithography technique. Until now the magnetic garnet films fabricated by LPE still show the best quality even on a nanoscale （about 100 nm）, which was considered to be impossible for LPE method.展开更多
The principle and performance of a fiber-optic Faraday-effect magnetic-field sensor based on an yttrium iron garnet (YIG) and two flux concentrations are described. A single polarization-maintaining optical fiber link...The principle and performance of a fiber-optic Faraday-effect magnetic-field sensor based on an yttrium iron garnet (YIG) and two flux concentrations are described. A single polarization-maintaining optical fiber links the sensor head to the source and detection system, in which the technique of phase shift cancellation is used to cancel the phase shift that accumulatein the optical fiber. Flux concentrators were exploited to enhance the YIG crystal magneto-optic sensitivity .The sensor system exhibited a noise-equivalent field of 8 pT/√Hz and a 3 dB bandwidth of ～10 MHz.展开更多
The yttrium iron garnet（YIG） samples are prepared at different temperatures from 900℃ to 1300℃ by the metalorganic decomposition（MOD） method. The chemical composition and crystal structure of the samples are stu...The yttrium iron garnet（YIG） samples are prepared at different temperatures from 900℃ to 1300℃ by the metalorganic decomposition（MOD） method. The chemical composition and crystal structure of the samples are studied by scanning electron microscope（SEM）, XRD, and Mossbauer spectrometer. It is shown that the ratio of ferric ions on two types of sites, the octahedral and the tetrahedral, is increased with the sintering temperature. At 1300℃, the pure garnet phase has been obtained, in which the ferric ions ratio is 2：3 leading to the minimum magnetic coercivity and maximum saturation magnetization. These results provide a route to synthesize pure YIG materials as the basic materials used in various spintronics applications.展开更多
基金Project supported by the National Key Research and Development Program of China(Grant No.2016YFA0300801)the National Natural Science Foundation of China(Grant Nos.51702042,61734002,61571079,51572042,and 61471096)+1 种基金the International Science&Technology Cooperation Program of China(Grant No.2015DFR50870)the Sichuan Science and Technology Support Project,China(Grant Nos.2016GZ0250 and 2017JY0002)
文摘Liquid phase epitaxy （LPE） is a mature technology. Early experiments on single magnetic crystal films fabricated by LPE were focused mainly on thick films for microwave and magneto-optical devices. The LPE is an excellent way to make a thick film, low damping magnetic garnet film and high-quality magneto-optical material. Today, the principal challenge in the applied material is to create sub-micrometer devices by using modern photolithography technique. Until now the magnetic garnet films fabricated by LPE still show the best quality even on a nanoscale （about 100 nm）, which was considered to be impossible for LPE method.
文摘The principle and performance of a fiber-optic Faraday-effect magnetic-field sensor based on an yttrium iron garnet (YIG) and two flux concentrations are described. A single polarization-maintaining optical fiber links the sensor head to the source and detection system, in which the technique of phase shift cancellation is used to cancel the phase shift that accumulatein the optical fiber. Flux concentrators were exploited to enhance the YIG crystal magneto-optic sensitivity .The sensor system exhibited a noise-equivalent field of 8 pT/√Hz and a 3 dB bandwidth of ～10 MHz.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11004095,11104134,61271077,50977042,and 10904061)
文摘The yttrium iron garnet（YIG） samples are prepared at different temperatures from 900℃ to 1300℃ by the metalorganic decomposition（MOD） method. The chemical composition and crystal structure of the samples are studied by scanning electron microscope（SEM）, XRD, and Mossbauer spectrometer. It is shown that the ratio of ferric ions on two types of sites, the octahedral and the tetrahedral, is increased with the sintering temperature. At 1300℃, the pure garnet phase has been obtained, in which the ferric ions ratio is 2：3 leading to the minimum magnetic coercivity and maximum saturation magnetization. These results provide a route to synthesize pure YIG materials as the basic materials used in various spintronics applications.
