Integrated gravity and magnetic study on patterns of petroleum basin occurrence in the China seas and adjacent areas

The China seas and adjacent areas contain numerous petroleum basins.One of the main challenges for future oil and gas exploration is to identify the inherent patterns of petroleum basin distribution.The formation and evolution of petroleum basins along with the migration and accumulation of oil and gas are often closely related to the tectonic environment.The gravity and magnetic fields with high lateral resolution and wide coverage provide important data for regional tectonic research.Based on the gravity data in the Global Satellite Gravity Anomaly Database(V31.1)and magnetic data from the Earth Magnetic Anomaly Grid(2-arc-minute resolution)(V2),this study uses integrated gravity and magnetic field technique to obtain integrated gravity and magnetic field result for the China seas and adjacent areas,and then adopts the normalized vertical derivative of the total horizontal derivative technique to conduct partition.Finally,it identifies the relationship between the partition characteristics and tectonics as well as the patterns of petroleum basin occurrence.The research shows that the partition of gravity and magnetic field integrated result has a good correlation with the Neo-Cathaysian tectonic system and tectonic units.The petroleum basins are characterized according to three blocks arranged from north to south and four zones arranged from east to west.The north-south block structure causes the uneven distribution of oil and gas resources in the mainland area and the differences in the hydrocarbon-bearing strata.Petroleum basins are more abundant in the north than in the south.The ages of the main oil-and gas-bearing strata are“Paleozoic–Mesozoic,Paleozoic–Mesozoic–Cenozoic,and Paleozoic–Mesozoic”,in order from north to south.The difference in the overall type of oil and gas resources in all basins is controlled by the east–west zonation.From east to west,the oil and gas resource type exhibits a wave-like pattern of“oil and gas,gas,oil and gas,gas”.The vertical distribution is characterized by an upper oil(Mesozoic–Cenozoic)and lower gas(Mesozoic–Paleozoic)structure.Within the study area,the Paleozoic marine strata should be the main strata of future natural gas exploration.

Planar Magnetic Integrated Harmonic Filter with Reduced EMI Noise

Through the analysis of the circuit structure and electromagnetic interference(EMI)conduction path,the structure of the traditional harmonic filter is optimized so that it has the ability to suppress EMI.Using the structure of planar magnetic integration not only ensures the basic harmonic suppression ability of the harmonic filter,but also improves the EMI suppression effect.With a single-phase voltage source 500-W SiC inverter as the platform,the feasibility and effectiveness of the design scheme are experimentally verified.The results indicated that the planar magnetic integrated harmonic EMI filter satisfies the design requirements.Additionally,the proposed planar magnetic integration scheme can significantly reduce the volume and weight of the filter and increase the power density of the entire system.

Integrated On-line Instrumentation System of Magnetic Properties Measurement

A portable microcomputer-controlled inspection system has been developed for detection of magnetic properties of soft magnetic materials. It incorporates custom designed software for control of the magnetic field during operation such as demagnetization, field sweeping, and for data logging and analysis. Results are recorded using a 12-bit analog to digital converter and are then stored on disk. The magnetic hysteresis loop and Barkhausen noise data can be converted into important magnetic parameters: coecivity, remanence, and hysteresis loss, Barkhausen amplitude, and Barkhausen noise energy. This system incorporated with the magnetostriction, and magnetoacoustic emission, is then related with the nondestructive detection of material degradation.

The behavior of a lithospheric magnetization and magnetic field model

The Earth’s“lithosphere”is its outer shell,made up of the Earth’s crust and outermost mantle.The part of the Earth’s magnetic field that originates in the lithosphere consists of a superposition of magnetic anomalies with a broad spectrum of sizes and intensities,which arise from geological and tectonic features.The lithospheric magnetic field is known from surface observations,and on larger scales from above-surface measurements.The increase in recent decades of satellites dedicated to measuring the Earth’s magnetic field has improved significantly our models of the Earth’s magnetic environment.Based on these increasing observations,a number of comprehensive field models have been constructed,some of which focus solely on the lithosphere,such as the MF model series.We present a map of lithospheric magnetic anomalies at 400 km altitude,based on a vertically integrated magnetization model.This height was chosen because it is the expected orbital altitude of the Macao Science Satellite-1(MSS-1)mission.The model presented herein indicates that the amplitude of the lithospheric anomalies at 400 km altitude is between-14.8 n T and 18.2 n T.This information is useful because it provides a reference for the lithospheric source of the Earth’s magnetic field that contributes to the magnetic measurements made from satellite instruments.The low inclination orbit of the MSS-1 mission will provide information that is sensitive to lateral variation within the lithosphere;these variations arise from plate tectonic features with longitudinal extent.In conclusion,the new MSS-1mission will provide valuable information in detecting compositional variations in the lithosphere,and in delineating large-scale geological structures.

Fiber loop ring-down cavity integrated U-bent single-mode-fiber for magnetic field sensing

A novel magnetic field sensing system based on the fiber loop ring-down technique is proposed in this paper. In the fiber loop, a U-bent single-mode-fiber structure coated with magnetic fluid(MF) serves as the sensing head, and an erbium-doped fiber amplifier(EDFA) is introduced to compensate for the intrinsic loss of the cavity. The ring-down time of the system varies with the change of applied magnetic field due to the tunable absorption coefficient and refractive index of the MF. Therefore, measurement of the magnetic field can be realized by monitoring the ringdown time. The experimental results show that the performance of the system is extremely dependent on the interrogation wavelength, because both the gain of the EDFA and the loss of the sensing head are wavelength dependent.We found that at the optimal wavelength, the ratio of the gain to loss attained its maximum. The sensing system was experimentally demonstrated and a sensitivity of-0.5951 μs∕Oe was achieved.

Overview of Planar Magnetics for High-frequency Resonant Converters

With the continuous development of power supplies toward miniaturization,light weights,and high levels of integration,research on high-frequency resonant conversion based on planar magnetics is becoming extensive.Combining the soft-switching characteristics of resonant converters with those of wide bandgap devices,the switching frequency can be increase to the MHz range,and the power density of the entire system can be improved considerably.However,higher switching frequencies impose new requirements for the structural design,loss distribution,and common mode(CM)noise suppression of passive magnetic components.Herein,a thorough survey of the-state-of-the-art of planar magnetics in high-frequency resonant converters is conducted.Printed circuit board winding-based planar magnetics,magnetic integration,and power-loss optimization strategies are summarized in detail.Suppression methods for CM noise in high-frequency planar magnetics are also clarified and discussed.An insight view into the future development of planar magnetics for high-frequency resonant converters is presented.

SVM strategy and analysis of a three-phase quasi-Z-source inverter with high voltage transmission ratio

Herein,we propose a novel three-phase quasi-Z-source inverter with a high voltage transmission ratio to address challenges such as high switching loss and sizeable magnetic components in the basic quasi-Z-source inverter.The proposed circuit topology,control strategy,and related analysis are presented.The circuit topology of the inverter comprises a quasi-Z-source network with an integrated magnetic inductor,an active clamp circuit,a three-phase inverter bridge,and an output LC filter,all of which are connected in series.An improved 12-sector space vector modulation scheme is proposed based on the root-mean-square value of the voltage and the instantaneous value of the current.Furthermore,analyses of the inverter voltage transmission ratio,resonant process,and parametric design guidelines for integrated magnetic inductor and zero-voltage switching conditions are presented.Experimental results on a 1-kVA prototype inverter demonstrate that the proposed inverter exhibits a higher transmission ratio and efficiency than existing inverters;thus,the proposed inverter would have broad prospects in low-voltage DC-AC applications.

A Novel Design of Hybrid Energy Storage System for Electric Vehicles

In order to provide long distance endurance and ensure the minimization of a cost function for electric vehicles,a new hybrid energy storage system for electric vehicle is designed in this paper.For the hybrid energy storage system,the paper proposes an optimal control algorithm designed using a Li-ion battery power dynamic limitation rule-based control based on the SOC of the super-capacitor.At the same time,the magnetic integration technology adding a second-order Bessel low-pass filter is introduced to DC-DC converters of electric vehicles.As a result,the size of battery is reduced,and the power quality of the hybrid energy storage system is optimized.Finally,the effectiveness of the proposed method is validated by simulation and experiment.