Study of the Parameters of a Magnetic DC Plasma Jet

A Magnetic DC plasma torch has been developed. Magnetic field distributions of solenoid coils have been calculated electrodynamically. For Ar +H2 plasma, the effects of an akial magnetic field and gas flow rate on the characttristics of the plasma jet were studied. Electron temperature, density and plasma velocity at 80 mm from the nozzle have been measured using a floating double probe and a Mach probe. The values of the heat fluxes to substrate were derived from experimental data.

Three dimensional structure prediction and proton nuclear magnetic resonance analysis of toxic pesticides in human blood plasma

The purpose of this study was to investigate the nuclear magnetic resonance （NMR） assignments of hydrolyzed products extracted from human blood plasma. The correlations between chemical, functional and structural prop- erties of highly toxic pesticides were investigated using the PreADME analysis. We observed that toxic pesticides possessed higher molecular weight and, more hydrogen bond donors and acceptors when compared with less toxic pesticides. The occurrence of functional groups and structural properties was analyzed using ~H-NMR. The ~H- NMR spectra of the phosphomethoxy class of pesticides were characterized by methyl resonances at 3.7-3.9 ppm （8） with the coupling constants of 11-16 Hz （Je-cns）. In phosphoethoxy pesticides, the methyl resonance was about 1.4 ppm （8） with the coupling constant of 10 Hz （Je-cH2） and the methylene resonances was 4.2-4.4 ppm （8） with the coupling constant of 0.8 Hz （Jp-cH3）, respectively. Our study shows that the values of four parameters such as chemical shift, coupling constant, integration and relaxation time correlated with the concentration of toxic pesticides, and can be used to characterise the proton groups in the molecular structures of toxic pesticides.

Effect of the magnetization parameter on electron acceleration during relativistic magnetic reconnection in ultra-intense laser-produced plasma

Relativistic magnetic reconnection(MR)driven by two ultra-intense lasers with different spot separation distances is simulated by a three-dimensional(3D)kinetic relativistic particle-in-cell(PIC)code.We find that changing the separation distance between two laser spots can lead to different magnetization parameters of the laser plasma environment.As the separation distance becomes larger,the magnetization parameterσbecomes smaller.The electrons are accelerated in these MR processes and their energy spectra can be fitted with double power-law spectra whose index will increase with increasing separation distance.Moreover,the collisionless shocks’contribution to energetic electrons is close to the magnetic reconnection contribution withσdecreasing,which results in a steeper electron energy spectrum.Basing on the3D outflow momentum configuration,the energetic electron spectra are recounted and their spectrum index is close to 1 in these three cases because the magnetization parameterσis very high in the 3D outflow area.

Comment on the paper “Hydromagnetic thin film flow of Casson fluid in non-Darcy porous medium with Joule dissipation and Navier's partial slip”

The present comment concerns some doubtful results included in the abovepaper.

Hydromagnetic oscillatory Couette flow in rotating system with induced magnetic field

This paper presents a study of hydromagnetic Couette flow of an incompress- ible and electrically conducting fluid between two parallel rotating plates, one of which is oscillating in its own plane. A uniform transverse magnetic field is used, and the induced magnetic field is taken into account. The exact solution to the governing equations is obtained in a closed form. The solution to the problem in the case of vanishing and small finite magnetic Prandtl numbers is also derived from the general solution. The asymp- totic behavior of the solution for large values of the frequency parameter is analyzed to gain some physical insights into the flow pattern. Expressions for the shear stress at both the oscillatory and stationary plates due to primary and secondary flows and mass flow rate in the primary and secondary flow directions are also obtained. The results of the fluid velocity and the induced magnetic field are presented. The shear stresses on the plates due to the primary and secondary flows and the corresponding mass flow rates are presented in a tabular form.

Non-Aligned Stagnation Point Flow of a Casson Fluid Past a Stretching Sheet in a Doubly Stratified Medium

This paper investigates the problem of oblique hydro magnetic stagnation point flow of an electrically conducting Casson fluid over stretching sheet embedded in a doubly stratified medium in the presence of thermal radiation and heat source/absorption with first order chemical reaction.It is assumed that the fluid impinges on the wall obliquely.Similarity variables were used to convert the partial differential equations to ordinary differential equations.The transformed ordinary differential equations are solved numerically using Runge-Kutta-Fehlberg method with shooting technique.It is observed that a boundary layer is formed when the stretching velocity of the surface is less than the in viscid free stream velocity at a point decreases with increase in the non-Newtonian rheology parameter.The augmentation of the temperature is observed with the magnetic parameter,heat source parameter and thermal radiation parameter while a reverse effect with thermal stratification number,Prandtl number and the velocity ratio parameter.Influence of Skin friction coefficient,Nusselt number and Sherwood number on the flow configurations for different values of pertinent parameters are portrayed graphically and discussed.Numerical results are compared with the published results and are found to be in good agreement with previously published results as special cases of present problem.The mass concentration is seen to be decrease with Schmidt number,chemical reaction parameter and solutal stratification number.

A New Feature Vector Using Selected Line Spectra for Pulsar Signal Bispectrum Characteristic Analysis and Recognition

Average pulse profiles of pulsar signals are analyzed using the bispectrum technique. The result shows that there are nonlinear phase couplings between the two frequency axes of the bispectrum charts, which indicate nonlinear factors in the generation and propagation of pulsar signals. Bispectra can be used as feature vectors of pulsar signals because of their being translation invariant. A one-dimension selected line spectrum algorithm for extracting pulsar signal characteristic is proposed. Compared with selected bispectra, the proposed selected line spectra have the maximum interclass separability measurements from the point of view of the whole one-dimension feature vector. Recognition experiments on several pulsar signals received at several frequency bands are carried out. The result shows that the selected line spectrum algorithm is suitable for extracting pulsar signal characteristics and has a good classification performance.

A method for aircraft magnetic interference compensation based on small signal model and LMS algorithm

Aeromagnetic interference could not be compensated effectively if the precision of parameters which are solved by the aircraft magnetic field model is low. In order to improve the compensation effect under this condition, a method based on small signal model and least mean square（LMS） algorithm is proposed. According to the method, the initial values of adaptive filter＇s weight vector are calculated with the solved model parameters through small signal model at first,then the small amount of direction cosine and its derivative are set as the input of the filter, and the small amount of the interference is set as the filter＇s expected vector. After that, the aircraft magnetic interference is compensated by LMS algorithm. Finally, the method is verified by simulation and experiment. The result shows that the compensation effect can be improved obviously by the LMS algorithm when original solved parameters have low precision. The method can further improve the compensation effect even if the solved parameters have high precision.