Ion temperature gradient(ITG)-driven turbulence with embedded static magnetic islands is simulated by utilizing a gyrokinetic theory-based global turbulence transport code(GKNET)in this work.Different from the traditi...Ion temperature gradient(ITG)-driven turbulence with embedded static magnetic islands is simulated by utilizing a gyrokinetic theory-based global turbulence transport code(GKNET)in this work.Different from the traditional equilibrium circular magnetic-surface average(EMSA)method,an advanced algorithm that calculates the perturbed magnetic-surface average(PMSA)of the electric potential has been developed to precisely deal with the zonal flow component in a non-circular magnetic surface perturbed by magnetic islands.Simulations show that the electric potential vortex structure inside islands induced by the magnetic islands is usually of odd parity when using the EMSA method.It is found that the odd symmetry vortex can transfer into an even one after a steep zonal flow gradient,i.e.the flow shear has been built in the vicinity of the magnetic islands by adopting the PMSA algorithm.The phase of the potential vortex in the poloidal cross section is coupled with the zonal flow shear.Such an electric potential vortex mode may be of essential importance in wide topics,such as the turbulence spreading across magnetic islands,neoclassical tearing mode physics,and also the interaction dynamics between the micro-turbulence and MHD activities.展开更多
Using first-principles total energy method, we study the structural, the electronic and the magnetic properties of the MnNi(110) c(2 × 2) surface alloy. Paramagnetic, ferromagnetic, and antiferromagnetic surf...Using first-principles total energy method, we study the structural, the electronic and the magnetic properties of the MnNi(110) c(2 × 2) surface alloy. Paramagnetic, ferromagnetic, and antiferromagnetic surfaces in the top layer and the second layer are considered. It turns out that the substitutional alloy in the outermost layer with ferromagnetic surface is the most stable in all cases. The buckling of the Mn-Ni(110) c(2×2) surface alloy in the top layer is as large as 0.26 A^° (1 A^=0.1 nm) and the weak rippling is 0.038 A^° in the third layer, in excellent agreement with experimental results. It is proved that the magnetism of Mn can stabilize this surface alloy. Electronic structures show a large magnetic splitting for the Mn atom, which is slightly higher than that of Mn-Ni(100) c(2×2) surface alloy (3.41 eV) due to the higher magnetic moment. A large magnetic moment for the Mn atom is predicted to be 3.81 μB. We suggest the ferromagnetic order of the Mn moments and the ferromagnetic coupling to the Ni substrate, which confirms the experimental results. The magnetism of Mn is identified as the driving force of the large buckling and the work-function change. The comparison with the other magnetic surface alloys is also presented and some trends are predicted.展开更多
With the air gap magnetic field distribution of surface mounted permanent magnet (PM) motors obtained using an analytical technique, the instantaneous electromagnetic torque and its corresponding components are inve...With the air gap magnetic field distribution of surface mounted permanent magnet (PM) motors obtained using an analytical technique, the instantaneous electromagnetic torque and its corresponding components are investigated with the Maxwell stress tensor method. Accurate results can easily be achieved using the proposed method without using the tedious finite element analysis (FEA). In this paper, the electromagnetic torque of a surface mounted PM motor with two phases energized is decomposed into four torque components. This technique is useful not only for the design and optimization of the permanent magnet motor, but also for the choice of control strategy.展开更多
Sealing is one of the most successful apphcatious of magnetic fluids. However, the sealing pressure difference is not satisfactory. This paper theoretically analyzes the mechanism of magnetic fluids sealing. Main fact...Sealing is one of the most successful apphcatious of magnetic fluids. However, the sealing pressure difference is not satisfactory. This paper theoretically analyzes the mechanism of magnetic fluids sealing. Main factors that have significant effects on the sealing ability include viscous stress on the interracial surface, magnetic surface tension, and the shape of the interracial surface. The sealing pressure with magnetic fluids decreases with increase of rotational speed. Experiments were carried out to study the stability of the interface between magnetic fluids and water. It has been shown that stability of the interface will be damaged by washing of water when the relative flow between water and magnetic fluid becomes turbulent.展开更多
The heat flux deposition pattern on the toroidal limiters installed in HT-7 was simulated with ANSYS code. The simulation model was established with the ripple of the magnetic field. The heat deposition pattern and te...The heat flux deposition pattern on the toroidal limiters installed in HT-7 was simulated with ANSYS code. The simulation model was established with the ripple of the magnetic field. The heat deposition pattern and temperature distribution on the surface of the toroidal linfiters were obtained. A comparison of the results obtained with and without the shaped tiles, used to reduce the heat flux on the leading edge of the limiters, was made. The maximum heat load allowed at the leading edge was about 1.8 MW/m2 because of the poor power removing capacity on the ends of the limiters. This approach can also be applied to other devices with a limiter configuration in a circular cross-section shape.展开更多
The construction of modern livable cities faces challenges in karst areas,including ground collapse and engineering problems.Wuhan,with a population of 13.74×10^(6) and approximately 1161 km^(2)of soluble rocks i...The construction of modern livable cities faces challenges in karst areas,including ground collapse and engineering problems.Wuhan,with a population of 13.74×10^(6) and approximately 1161 km^(2)of soluble rocks in the urban area of 8569.15 km^(2),predominantly consists of concealed karst areas where occasional ground collapse events occur,posing significant threats to underground engineering projects.To address these challenges,a comprehensive geological survey was conducted in Wuhan,focusing on major karstrelated issues.Geophysical methods offer advantages over drilling in detecting concealed karst areas due to their efficiency,non-destructiveness,and flexibility.This paper reviewed the karst geological characteristics in Wuhan and the geophysical exploration methods for karst,selected eight effective geophysical methods for field experimentation,evaluated their suitability,and proposed method combinations for different karst scenarios.The results show that different geophysical methods have varying applicability for karst detection in Wuhan,and combining multiple methods enhances detection effectiveness.The specific recommendations for method combinations provided in this study serve as a valuable reference for karst detection in Wuhan.展开更多
The existence of shear horizontal surface waves in a magneto-electro-elastic (MEE) half-space with hexagonal (6mm) symmetry is investigated. The surface of the MEE half-space is mechanically free, but subjected to...The existence of shear horizontal surface waves in a magneto-electro-elastic (MEE) half-space with hexagonal (6mm) symmetry is investigated. The surface of the MEE half-space is mechanically free, but subjected to four types of electromagnetic boundary conditions. These boundary conditions are electrically open/magnetically closed, electrically open/magnetically open, electrically closed/magnetically open and electrically closed/magnetically dosed. It is shown that except for the electrically open/magnetically closed condition, the three other sets of electromagnetic boundary conditions allow the propagation of shear horizontal surface waves.展开更多
Magnetic composites of carbon nanotubes (CNTs) are synthesized by the in situ catalytic decomposition of benzene at temperatures as low as 400℃ over Fe nanoparticles (mean grain size = 26 nm) produced by sol-gel ...Magnetic composites of carbon nanotubes (CNTs) are synthesized by the in situ catalytic decomposition of benzene at temperatures as low as 400℃ over Fe nanoparticles (mean grain size = 26 nm) produced by sol-gel fabrication and hydrogen reduction. The yield of CNT composite is up to about 3025% in a run of 6 h. FE- SEM and HRTEM investigations reveal that one-dimensional carbon species are produced in a large quantity. A relatively high value of magnetization is observed for the composite due to the encapsulation of ferromagnetic Fe3 C and/or α-Fe. The method is suitable for the mass-production of CNT composites that contain magnetic nanoparticles.展开更多
This paper presents an analytical method to design the high-efficiency surface permanent magnet synchronous motor(SPMSM)or generator(SPMSG).The air-gap and permanent magnet size can be approximately determined based o...This paper presents an analytical method to design the high-efficiency surface permanent magnet synchronous motor(SPMSM)or generator(SPMSG).The air-gap and permanent magnet size can be approximately determined based on our mathematics model,which is the most important part of SPMSM design.From our method,we can know that motor’s power out torque is related to the torque angle that we selected in our design and it affects the air-gap and permanent magnet size.If we choose a low torque angle,the motor or generator’s overload power handing capability will increase.The embrace value has a vital place in designing a motor or generator due to its effects on air gap flux density,cogging torque,efficiency and so on.In order to avoid the knee effect,the working point of the permanent magnet we selected in the design should be bigger than 0.5.The developed 36 slots,4 poles,surface mound permanent generator is proposed.The corresponding finite element analysis(FEA)model is built based on our design method.Structure optimization includes stator and rotor structure size,permanent magnet size,magnetic bridge and air gap length which are analyzed and simulated by ANSYS Maxwell 2D FEA.Thermal analysis is conducted,and the housing of the alternator is designed.The alternator prototype is fabricated and tested based on our design.展开更多
Soil magnetic characteristics are correlated with soil p H and organic matter content. Analyzing soil magnetic characteristics, organic matter content and p H can indirectly evaluate soil pollution caused by human act...Soil magnetic characteristics are correlated with soil p H and organic matter content. Analyzing soil magnetic characteristics, organic matter content and p H can indirectly evaluate soil pollution caused by human activities. This study analyzed the soil magnetic characteristics, organic matter content and p H in surface soil samples from different land use types in Shihezi city, a newly and rapidly developing oasis city in Xinjiang of China. The aims of this study were to explore the possible relationships among the soil magnetic parameters and thereby improve the understanding of influence of urbanization on soil properties. Eighty surface soil samples at the depth of 0–10 cm were collected from 29 July to 4 August 2013. The results showed that the magnetic minerals in surface soil were dominated by ferromagnetic minerals. Spatially, the magnetic susceptibility(χLF), anhysteretic remanent magnetization susceptibility(χARM), saturation isothermal remanent magnetization(SIRM) and "soft" isothermal remanent magnetization(SOFT) were found to be most dominant in the new northern urban area B(N-B), followed by built-up areas(U), suburban agricultural land(F), and then the new northern urban area A(N-A). The values of χLF, χARM, SIRM and SOFT were higher in the areas with high intensities of human activities and around the main roads. Meanwhile, the property "hard" isothermal remanent magnetization(HIRM) followed the order of U〉N-B〉F〉N-A. Built-up areas had an average p H value of 7.93, which was much higher than that in the new northern urban areas as well as in suburban agricultural land, due to the increased urban pollutant emissions. The average value of soil organic matter content in the whole study area was 34.69 g/kg, and the values in the new northern urban areas were much higher than those in the suburban agricultural land and built-up areas. For suburban agricultural land, soil organic matter content was significantly negatively correlated with χLF, and had no correlation with other magnetic parameters, since the soil was frequently ploughed. In the new northern urban areas(N-A and N-B), there were significant positive correlations of soil organic matter contents with χARM, SIRM, SOFT and HIRM, because natural grasslands were not frequently turned over. For the built-up areas, soil organic matter contents were significantly positively correlated with χLF, χARM, SIRM and SOFT, but not significantly correlated with frequency-dependent susceptibility(χFD, expressed as a percentage) and HIRM, because the soil was not frequently turned over or influenced by human activities. The results showed that soil magnetic characteristics are related to the soil turnover time.展开更多
Surface waves (SWs) in planar-type overdense plasmas are analyzed and the invariable SW mode caused by the resonant excitation of surface plasmon polaritons (SPPs) is presented. It is found that the electric field...Surface waves (SWs) in planar-type overdense plasmas are analyzed and the invariable SW mode caused by the resonant excitation of surface plasmon polaritons (SPPs) is presented. It is found that the electric field peaks at the location where the plasma density equals the cut-off density while the plasma density gradient and the collision rate have different influences on the field amplitude and the peak's width. Moreover, the mode conversion between SW of SPPs and electron plasma waves play a significant role in production of overdense plasma.展开更多
Detection of the second harmonic response of magnetic nanostructures to an ac current is shown to be a very sensitive probe of the magnetization reversal process. A temperature oscillation is obtained by Joule heating...Detection of the second harmonic response of magnetic nanostructures to an ac current is shown to be a very sensitive probe of the magnetization reversal process. A temperature oscillation is obtained by Joule heating instead of using a laser as the heat source, as in thermo-galvanic voltage measurements (TGV). Joule heating is used to produce a large local temperature gradient in asymmetric Co/Cu/Co spin valves. Evidence is found for an effect of a heat current on magnetization.展开更多
In this paper,a design is presented for a high-speed,high-power motor for a four-legged robot actuator that was optimized using the weighted sum method(WSM)based on the Taguchi method,and the response surface method(R...In this paper,a design is presented for a high-speed,high-power motor for a four-legged robot actuator that was optimized using the weighted sum method(WSM)based on the Taguchi method,and the response surface method(RSM).First,output torque,torque constant,torque ripple,and efficiency were selected as objective functions for the optimized design.The sampling method was implemented to use a mixed orthogonal array and the single response characteristics of each objective function were compared using the Taguchi method.Moreover,to consider the multi-response characteristic of the objective functions,WSM was applied.Second,the 2D finite element analysis result of the RSM was compared with that using the WSM.Finally,an experiment was carried out on the manufactured motor and the optimized model is presented here.展开更多
We use ion implantation as a new approach to build an anti-ferromagnetic (AFM) cluster embedded exchange bias (EB) system. Co film with thickness of 130nm is deposited on the Si (111) substrate using magnetron s...We use ion implantation as a new approach to build an anti-ferromagnetic (AFM) cluster embedded exchange bias (EB) system. Co film with thickness of 130nm is deposited on the Si (111) substrate using magnetron sputtering, 60keV O+ is chosen to implanted into the Co film to form CoO AFM clusters coupling with Co matrix at the interface. By measuring the hysteresis loop after field-cooling, significant shifts of loop along the applied field are confirmed. When increasing the implantation dose to 2×1017/cm2 and annealed samples in N2 atmosphere, we obtain the highest HEB to 458Oe.展开更多
The surface structure and electronic property of InP(001)-(2 ×1)S surface under S-rich condition are investigated based on first-principles simulations. The analyses of phase transition show that the 3B model...The surface structure and electronic property of InP(001)-(2 ×1)S surface under S-rich condition are investigated based on first-principles simulations. The analyses of phase transition show that the 3B model is the most stable structure and the S-S dimer is difficult to form. The geometry of the 3B structure agrees well with the experiments. It is also found that the 3B structure has a good passivation with a band gap of about 1.24eV. The results indicate that the 3B structure is the best candidate for the sulfur-rich InP(001)(2 × 1)A phase.展开更多
The s-polarized surface plasmon polaritons (SPPs) at the interface between dielectric and metamaterial are studied, and the dispersion relations of SPPs are also presented. Using the prism coupling mechanism, we obt...The s-polarized surface plasmon polaritons (SPPs) at the interface between dielectric and metamaterial are studied, and the dispersion relations of SPPs are also presented. Using the prism coupling mechanism, we obtain the attenuated total reflection (ATR) spectra in the frequency regime based on the Otto configuration. It is found that the thickness of the dielectric in the configuration and the small damping of the metamaterial affect the coupling strength significantly without changing the coupling frequency. Furthermore, the optimized thickness of the dielectric decreases with a larger damping, and the coefficient F of the metamaterial also determines the coupling frequency and strength.展开更多
Based on full 3D finite element method simulations, the transmission of a dielectric-loaded surface plasmon polariton waveguide (DLSPPW) based 1/4 circle is calculated for a 90° bend model and a 270° bend ...Based on full 3D finite element method simulations, the transmission of a dielectric-loaded surface plasmon polariton waveguide (DLSPPW) based 1/4 circle is calculated for a 90° bend model and a 270° bend model, respectively. It is found that the 270° bend model gives almost pure bending loss while the 90° bend model contains additional coupling loss. The models are applied to deduce the loss and unloaded quality factor of DLSPPW based waveguide ring resonators (WRRs) and the results of the 270° bend model agree well with direct simulating results of the WRRs. Thus the 270° bend model gives a fast and simple way to calculate bending loss and it is helpful for WRR design because no wavelength scan is needed.展开更多
We fabricate Fe3O4 thin films on Si(100) substrates at different temperatures using pulsed laser deposition, and study the effect of annealing and deposition temperature on the structural and magnetic properties of ...We fabricate Fe3O4 thin films on Si(100) substrates at different temperatures using pulsed laser deposition, and study the effect of annealing and deposition temperature on the structural and magnetic properties of Fe3O4 thin films. Subsequently, the films are characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM) and vibrating sample magnetometery (VSM). The XRD results of these films confirm the presence of the Fe3O4 phase and show room-temperature ferromagnetism, as observed with VSM. We demonstrate the optimized deposition and annealing conditions for an enhanced magnetization of 854 emu/cm3 that is very high when compared to the bulk sample.展开更多
The transfer curve of the giant-magnetoresistive (GMR) magnetic head represents its most important property in applications, and it is calculated by the micromagnetic modeling of the free layer and the pinned layer ...The transfer curve of the giant-magnetoresistive (GMR) magnetic head represents its most important property in applications, and it is calculated by the micromagnetic modeling of the free layer and the pinned layer in the heart of the GMR head. Affections of the bias hard magnetic layer and the anti-ferromagnetic pinning layer are modeled by effective magnetic fields. The simulated transfer curve agrees with experiment quite well, therefore the values of these effective magnetic fields can be determined by the model. A synthetic antiferromagnetic spin valve structure GMR head is also analyzed for comparison.展开更多
The structural and magnetic properties of Sm ion-implanted GaN with different Sm concentrations are investigated. XRD results do not show any peaks associated with second phase formation. Magnetic investigations perfo...The structural and magnetic properties of Sm ion-implanted GaN with different Sm concentrations are investigated. XRD results do not show any peaks associated with second phase formation. Magnetic investigations performed by superconducting quantum interference device reveal ferromagnetic behavior with an ordering tem- perature above room temperature in all the implanted samples, while the effective magnetic moment per Sin obtained from saturation magnetization gives a much higher value than the atomic moment of Sm. These results could be explained by the phenomenological model proposed by Dhar et al. [Phys. Rev. Lett. 94(2005)037205, Phys. Rev. B 72(2005)245203] in terms of a long-range spin polarization of the GaN matrix by the Sm atoms.展开更多
基金partially supported by the National Key R&D Program of China(No.2019YFE0300002)by National Natural Science Foundation of China(Nos.U1967206 and 12275071)。
文摘Ion temperature gradient(ITG)-driven turbulence with embedded static magnetic islands is simulated by utilizing a gyrokinetic theory-based global turbulence transport code(GKNET)in this work.Different from the traditional equilibrium circular magnetic-surface average(EMSA)method,an advanced algorithm that calculates the perturbed magnetic-surface average(PMSA)of the electric potential has been developed to precisely deal with the zonal flow component in a non-circular magnetic surface perturbed by magnetic islands.Simulations show that the electric potential vortex structure inside islands induced by the magnetic islands is usually of odd parity when using the EMSA method.It is found that the odd symmetry vortex can transfer into an even one after a steep zonal flow gradient,i.e.the flow shear has been built in the vicinity of the magnetic islands by adopting the PMSA algorithm.The phase of the potential vortex in the poloidal cross section is coupled with the zonal flow shear.Such an electric potential vortex mode may be of essential importance in wide topics,such as the turbulence spreading across magnetic islands,neoclassical tearing mode physics,and also the interaction dynamics between the micro-turbulence and MHD activities.
基金Project supported by the Special Funds of the National Natural Science Foundation of China(Grant No.10947102)the Foundation of Education Committee of Chongqing,China(Grant No.KJ090503)+1 种基金the Foundation of Science Committee of Chongqing,China (Grant No.CSTC 2007BB4385)the Doctoral Foundation of Chongqing University of Posts and Telecommunications,China (Grant No.A2008-64)
文摘Using first-principles total energy method, we study the structural, the electronic and the magnetic properties of the MnNi(110) c(2 × 2) surface alloy. Paramagnetic, ferromagnetic, and antiferromagnetic surfaces in the top layer and the second layer are considered. It turns out that the substitutional alloy in the outermost layer with ferromagnetic surface is the most stable in all cases. The buckling of the Mn-Ni(110) c(2×2) surface alloy in the top layer is as large as 0.26 A^° (1 A^=0.1 nm) and the weak rippling is 0.038 A^° in the third layer, in excellent agreement with experimental results. It is proved that the magnetism of Mn can stabilize this surface alloy. Electronic structures show a large magnetic splitting for the Mn atom, which is slightly higher than that of Mn-Ni(100) c(2×2) surface alloy (3.41 eV) due to the higher magnetic moment. A large magnetic moment for the Mn atom is predicted to be 3.81 μB. We suggest the ferromagnetic order of the Mn moments and the ferromagnetic coupling to the Ni substrate, which confirms the experimental results. The magnetism of Mn is identified as the driving force of the large buckling and the work-function change. The comparison with the other magnetic surface alloys is also presented and some trends are predicted.
基金Project supported by the Science Foundation of Shanghai Municipal Commission of Education (Grant No.04AB30)
文摘With the air gap magnetic field distribution of surface mounted permanent magnet (PM) motors obtained using an analytical technique, the instantaneous electromagnetic torque and its corresponding components are investigated with the Maxwell stress tensor method. Accurate results can easily be achieved using the proposed method without using the tedious finite element analysis (FEA). In this paper, the electromagnetic torque of a surface mounted PM motor with two phases energized is decomposed into four torque components. This technique is useful not only for the design and optimization of the permanent magnet motor, but also for the choice of control strategy.
基金Project supported by National High-Technology Research and De-velopment Program of China (Grant No .2002AA323070)
文摘Sealing is one of the most successful apphcatious of magnetic fluids. However, the sealing pressure difference is not satisfactory. This paper theoretically analyzes the mechanism of magnetic fluids sealing. Main factors that have significant effects on the sealing ability include viscous stress on the interracial surface, magnetic surface tension, and the shape of the interracial surface. The sealing pressure with magnetic fluids decreases with increase of rotational speed. Experiments were carried out to study the stability of the interface between magnetic fluids and water. It has been shown that stability of the interface will be damaged by washing of water when the relative flow between water and magnetic fluid becomes turbulent.
基金National Natural Science Foundation of China(No.10475080)the Foundation of Hefei Institutes of Physical Science(No.2006YZJJ-1)
文摘The heat flux deposition pattern on the toroidal limiters installed in HT-7 was simulated with ANSYS code. The simulation model was established with the ripple of the magnetic field. The heat deposition pattern and temperature distribution on the surface of the toroidal linfiters were obtained. A comparison of the results obtained with and without the shaped tiles, used to reduce the heat flux on the leading edge of the limiters, was made. The maximum heat load allowed at the leading edge was about 1.8 MW/m2 because of the poor power removing capacity on the ends of the limiters. This approach can also be applied to other devices with a limiter configuration in a circular cross-section shape.
基金jointly supported by the project of Chinese National Natural Science Foundation(42107485)National Key R&D Program(2020YFC1512400,2018YFC800804)China Geological Survey(DD20190282,DD20221734,and DD20230323)。
文摘The construction of modern livable cities faces challenges in karst areas,including ground collapse and engineering problems.Wuhan,with a population of 13.74×10^(6) and approximately 1161 km^(2)of soluble rocks in the urban area of 8569.15 km^(2),predominantly consists of concealed karst areas where occasional ground collapse events occur,posing significant threats to underground engineering projects.To address these challenges,a comprehensive geological survey was conducted in Wuhan,focusing on major karstrelated issues.Geophysical methods offer advantages over drilling in detecting concealed karst areas due to their efficiency,non-destructiveness,and flexibility.This paper reviewed the karst geological characteristics in Wuhan and the geophysical exploration methods for karst,selected eight effective geophysical methods for field experimentation,evaluated their suitability,and proposed method combinations for different karst scenarios.The results show that different geophysical methods have varying applicability for karst detection in Wuhan,and combining multiple methods enhances detection effectiveness.The specific recommendations for method combinations provided in this study serve as a valuable reference for karst detection in Wuhan.
基金Supported by the National Natural Science Foundation of China under Grant Nos 10672108 and 10472074.
文摘The existence of shear horizontal surface waves in a magneto-electro-elastic (MEE) half-space with hexagonal (6mm) symmetry is investigated. The surface of the MEE half-space is mechanically free, but subjected to four types of electromagnetic boundary conditions. These boundary conditions are electrically open/magnetically closed, electrically open/magnetically open, electrically closed/magnetically open and electrically closed/magnetically dosed. It is shown that except for the electrically open/magnetically closed condition, the three other sets of electromagnetic boundary conditions allow the propagation of shear horizontal surface waves.
基金Supported by the National Natural Science Foundation of China under Grant No 10674059, the National High Technology Research and Development Program of China under Grant No 2007AA021805, and the National Basic Research Program of China under Grant No 2005CB623605.
文摘Magnetic composites of carbon nanotubes (CNTs) are synthesized by the in situ catalytic decomposition of benzene at temperatures as low as 400℃ over Fe nanoparticles (mean grain size = 26 nm) produced by sol-gel fabrication and hydrogen reduction. The yield of CNT composite is up to about 3025% in a run of 6 h. FE- SEM and HRTEM investigations reveal that one-dimensional carbon species are produced in a large quantity. A relatively high value of magnetization is observed for the composite due to the encapsulation of ferromagnetic Fe3 C and/or α-Fe. The method is suitable for the mass-production of CNT composites that contain magnetic nanoparticles.
文摘This paper presents an analytical method to design the high-efficiency surface permanent magnet synchronous motor(SPMSM)or generator(SPMSG).The air-gap and permanent magnet size can be approximately determined based on our mathematics model,which is the most important part of SPMSM design.From our method,we can know that motor’s power out torque is related to the torque angle that we selected in our design and it affects the air-gap and permanent magnet size.If we choose a low torque angle,the motor or generator’s overload power handing capability will increase.The embrace value has a vital place in designing a motor or generator due to its effects on air gap flux density,cogging torque,efficiency and so on.In order to avoid the knee effect,the working point of the permanent magnet we selected in the design should be bigger than 0.5.The developed 36 slots,4 poles,surface mound permanent generator is proposed.The corresponding finite element analysis(FEA)model is built based on our design method.Structure optimization includes stator and rotor structure size,permanent magnet size,magnetic bridge and air gap length which are analyzed and simulated by ANSYS Maxwell 2D FEA.Thermal analysis is conducted,and the housing of the alternator is designed.The alternator prototype is fabricated and tested based on our design.
基金funded by the National Natural Science Foundation of China (41171165, 41161029)the Importation and Development of High-Caliber Talents Project of Beijing Municipal Institutions (IDHT20130322)the Talent Strong School Plan of Funded Project of Beijing Union University (BPHR2012E01)
文摘Soil magnetic characteristics are correlated with soil p H and organic matter content. Analyzing soil magnetic characteristics, organic matter content and p H can indirectly evaluate soil pollution caused by human activities. This study analyzed the soil magnetic characteristics, organic matter content and p H in surface soil samples from different land use types in Shihezi city, a newly and rapidly developing oasis city in Xinjiang of China. The aims of this study were to explore the possible relationships among the soil magnetic parameters and thereby improve the understanding of influence of urbanization on soil properties. Eighty surface soil samples at the depth of 0–10 cm were collected from 29 July to 4 August 2013. The results showed that the magnetic minerals in surface soil were dominated by ferromagnetic minerals. Spatially, the magnetic susceptibility(χLF), anhysteretic remanent magnetization susceptibility(χARM), saturation isothermal remanent magnetization(SIRM) and "soft" isothermal remanent magnetization(SOFT) were found to be most dominant in the new northern urban area B(N-B), followed by built-up areas(U), suburban agricultural land(F), and then the new northern urban area A(N-A). The values of χLF, χARM, SIRM and SOFT were higher in the areas with high intensities of human activities and around the main roads. Meanwhile, the property "hard" isothermal remanent magnetization(HIRM) followed the order of U〉N-B〉F〉N-A. Built-up areas had an average p H value of 7.93, which was much higher than that in the new northern urban areas as well as in suburban agricultural land, due to the increased urban pollutant emissions. The average value of soil organic matter content in the whole study area was 34.69 g/kg, and the values in the new northern urban areas were much higher than those in the suburban agricultural land and built-up areas. For suburban agricultural land, soil organic matter content was significantly negatively correlated with χLF, and had no correlation with other magnetic parameters, since the soil was frequently ploughed. In the new northern urban areas(N-A and N-B), there were significant positive correlations of soil organic matter contents with χARM, SIRM, SOFT and HIRM, because natural grasslands were not frequently turned over. For the built-up areas, soil organic matter contents were significantly positively correlated with χLF, χARM, SIRM and SOFT, but not significantly correlated with frequency-dependent susceptibility(χFD, expressed as a percentage) and HIRM, because the soil was not frequently turned over or influenced by human activities. The results showed that soil magnetic characteristics are related to the soil turnover time.
文摘Surface waves (SWs) in planar-type overdense plasmas are analyzed and the invariable SW mode caused by the resonant excitation of surface plasmon polaritons (SPPs) is presented. It is found that the electric field peaks at the location where the plasma density equals the cut-off density while the plasma density gradient and the collision rate have different influences on the field amplitude and the peak's width. Moreover, the mode conversion between SW of SPPs and electron plasma waves play a significant role in production of overdense plasma.
文摘Detection of the second harmonic response of magnetic nanostructures to an ac current is shown to be a very sensitive probe of the magnetization reversal process. A temperature oscillation is obtained by Joule heating instead of using a laser as the heat source, as in thermo-galvanic voltage measurements (TGV). Joule heating is used to produce a large local temperature gradient in asymmetric Co/Cu/Co spin valves. Evidence is found for an effect of a heat current on magnetization.
基金supported by the Industrial Strategic Technology Development Program(10070171,Development of core technology for advanced locomotion/manipulation based on high-speed/power robot platform and robot intelligence)funded By the Ministry of Trade,Industry&Energy(MI,Korea).
文摘In this paper,a design is presented for a high-speed,high-power motor for a four-legged robot actuator that was optimized using the weighted sum method(WSM)based on the Taguchi method,and the response surface method(RSM).First,output torque,torque constant,torque ripple,and efficiency were selected as objective functions for the optimized design.The sampling method was implemented to use a mixed orthogonal array and the single response characteristics of each objective function were compared using the Taguchi method.Moreover,to consider the multi-response characteristic of the objective functions,WSM was applied.Second,the 2D finite element analysis result of the RSM was compared with that using the WSM.Finally,an experiment was carried out on the manufactured motor and the optimized model is presented here.
基金Supported by the National Natural Science Foundation of China under Grant No 10875004, and the Bilateral Cooperation between China and Belgium under Grant No BIL07/02.
文摘We use ion implantation as a new approach to build an anti-ferromagnetic (AFM) cluster embedded exchange bias (EB) system. Co film with thickness of 130nm is deposited on the Si (111) substrate using magnetron sputtering, 60keV O+ is chosen to implanted into the Co film to form CoO AFM clusters coupling with Co matrix at the interface. By measuring the hysteresis loop after field-cooling, significant shifts of loop along the applied field are confirmed. When increasing the implantation dose to 2×1017/cm2 and annealed samples in N2 atmosphere, we obtain the highest HEB to 458Oe.
基金Supported by the Special Funds of the National Natural Science Foundation of China under Grant No 10947102, the Foundation of Education Committees of Chongqing (No KJ090503), Doctoral Foundation of Chongqing University of Posts and telecommunications (A2008-64).
文摘The surface structure and electronic property of InP(001)-(2 ×1)S surface under S-rich condition are investigated based on first-principles simulations. The analyses of phase transition show that the 3B model is the most stable structure and the S-S dimer is difficult to form. The geometry of the 3B structure agrees well with the experiments. It is also found that the 3B structure has a good passivation with a band gap of about 1.24eV. The results indicate that the 3B structure is the best candidate for the sulfur-rich InP(001)(2 × 1)A phase.
基金Supported by the National Natural Science Foundation of China under Grant No 10775055.
文摘The s-polarized surface plasmon polaritons (SPPs) at the interface between dielectric and metamaterial are studied, and the dispersion relations of SPPs are also presented. Using the prism coupling mechanism, we obtain the attenuated total reflection (ATR) spectra in the frequency regime based on the Otto configuration. It is found that the thickness of the dielectric in the configuration and the small damping of the metamaterial affect the coupling strength significantly without changing the coupling frequency. Furthermore, the optimized thickness of the dielectric decreases with a larger damping, and the coefficient F of the metamaterial also determines the coupling frequency and strength.
基金Supported by the National Natural Science Foundation of China under Grant Nos 10821062 and 10804004, the National Basic Research Program of China under Grant Nos 2007CB307001and 2009CB930504, and the Specialized Research Fund for the Doctoral Program of Higher Education under Grant No 200800011023.
文摘Based on full 3D finite element method simulations, the transmission of a dielectric-loaded surface plasmon polariton waveguide (DLSPPW) based 1/4 circle is calculated for a 90° bend model and a 270° bend model, respectively. It is found that the 270° bend model gives almost pure bending loss while the 90° bend model contains additional coupling loss. The models are applied to deduce the loss and unloaded quality factor of DLSPPW based waveguide ring resonators (WRRs) and the results of the 270° bend model agree well with direct simulating results of the WRRs. Thus the 270° bend model gives a fast and simple way to calculate bending loss and it is helpful for WRR design because no wavelength scan is needed.
文摘We fabricate Fe3O4 thin films on Si(100) substrates at different temperatures using pulsed laser deposition, and study the effect of annealing and deposition temperature on the structural and magnetic properties of Fe3O4 thin films. Subsequently, the films are characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM) and vibrating sample magnetometery (VSM). The XRD results of these films confirm the presence of the Fe3O4 phase and show room-temperature ferromagnetism, as observed with VSM. We demonstrate the optimized deposition and annealing conditions for an enhanced magnetization of 854 emu/cm3 that is very high when compared to the bulk sample.
文摘The transfer curve of the giant-magnetoresistive (GMR) magnetic head represents its most important property in applications, and it is calculated by the micromagnetic modeling of the free layer and the pinned layer in the heart of the GMR head. Affections of the bias hard magnetic layer and the anti-ferromagnetic pinning layer are modeled by effective magnetic fields. The simulated transfer curve agrees with experiment quite well, therefore the values of these effective magnetic fields can be determined by the model. A synthetic antiferromagnetic spin valve structure GMR head is also analyzed for comparison.
基金Supported by the Knowledge Innovation Project of Chinese Academy of Sciences under Grant No YYYJ-0701-02, the National Natural Science Foundation of China under Grant Nos 60576046 and 60606002, and the National Basic Research Program of China under Grant No 2002CB311903, 2006CB604905 and 513270605.
文摘The structural and magnetic properties of Sm ion-implanted GaN with different Sm concentrations are investigated. XRD results do not show any peaks associated with second phase formation. Magnetic investigations performed by superconducting quantum interference device reveal ferromagnetic behavior with an ordering tem- perature above room temperature in all the implanted samples, while the effective magnetic moment per Sin obtained from saturation magnetization gives a much higher value than the atomic moment of Sm. These results could be explained by the phenomenological model proposed by Dhar et al. [Phys. Rev. Lett. 94(2005)037205, Phys. Rev. B 72(2005)245203] in terms of a long-range spin polarization of the GaN matrix by the Sm atoms.