Bunch-length measurement at a bunch-by-bunch rate based on time–frequency-domain joint analysis techniques and its application

This paper presents a new technique for measuring the bunch length of a high-energy electron beam at a bunch-by-bunch rate in storage rings.This technique uses the time–frequency-domain joint analysis of the bunch signal to obtain bunch-by-bunch and turn-by-turn longitudinal parameters,such as bunch length and synchronous phase.The bunch signal is obtained using a button electrode with a bandwidth of several gigahertz.The data acquisition device was a high-speed digital oscilloscope with a sampling rate of more than 10 GS/s,and the single-shot sampling data buffer covered thousands of turns.The bunch-length and synchronous phase information were extracted via offline calculations using Python scripts.The calibration coefficient of the system was determined using a commercial streak camera.Moreover,this technique was tested on two different storage rings and successfully captured various longitudinal transient processes during the harmonic cavity debugging process at the Shanghai Synchrotron Radiation Facility(SSRF),and longitudinal instabilities were observed during the single-bunch accumulation process at Hefei Light Source(HLS).For Gaussian-distribution bunches,the uncertainty of the bunch phase obtained using this technique was better than 0.2 ps,and the bunch-length uncertainty was better than 1 ps.The dynamic range exceeded 10 ms.This technology is a powerful and versatile beam diagnostic tool that can be conveniently deployed in high-energy electron storage rings.

Instantaneous rotation speed measurement and error analysis for variable speed hydraulic system

In order to monitor the working state of piston motor and measure its instantaneous rotation speed accurately, the measuring principle and method of instantaneous rotation speed based on industrial personal computer and data acquisition card are introduced, and the major error source, influence mechanism and processing method of data quantization error are dis- cussed. By means of hybrid programming approach of LabVIEW and MATLAB, the instantaneous rotation speed measurement system for the piston motor in variable speed hydraulic system is designed. The simulation and experimental results show that the designed instantaneous speed measurement system is feasible. Furthermore, the sampling frequency has an important influ- ence on the instantaneous rotation speed measurement of piston motor and higher sampling frequency can lower quantization er- ror and improve measurement accuracy.

Resilience based importance measure analysis for SoS

In a system of systems(SoS),resilience is an important factor in maintaining the functionality,stability,and enhancing the operation effectiveness.From the perspective of resilience,this paper studies the importance of the SoS,and a resilience-based importance measure analysis is conducted to provide suggestions in the design and optimization of the structure of the SoS.In this paper,the components of the SoS are simplified as four kinds of network nodes:sensor,decision point,influencer,and target.In this networked SoS,the number of operation loops is used as the performance indicator,and an approximate algorithm,which is based on eigenvalue of the adjacency matrix,is proposed to calculate the number of operation loops.In order to understand the performance change of the SoS during the attack and defense process in the operations,an integral resilience model is proposed to depict the resilience of the SoS.From different perspectives of enhancing the resilience,different measures,parameters and the corresponding algorithms for the resilience importance of components are proposed.Finally,a case study on an SoS is conducted to verify the validity of the network modelling and the resiliencebased importance analysis method.

Morphological Measurement and Analysis of Gymnarchus Niloticus

Gyrnnarchus niloticus swims by undulations of a long-based dorsal fin, while its body axis is in many cases held straight during swimming. This paper provides a brief relevant introduction to Gyrnnarchus niloticus, which belongs to the African freshwater electric eels but can inspire our bionic interests in propulsion besides its abilities in electric sensing. A special larva of Gyrnnarchus niloticus was morphologically measured by photographing it with a piece of scale-calibrated paper as the background. Then we analyzed the data by a CFD-aided approach. Detailed flow patterns around the larva and a NACA0012 hydrofoil were respectively calculated and visualized at the Reynolds number of 7350 or so. The results show that the profile of Gyrnnarchus niloticus is well streamlined.

Vector-intensity measure based seismic vulnerability analysis of bridge structures

This paper presents a method for seismic vulnerability analysis of bridge structures based on vector-valued intensity measure （viM）, which predicts the limit-state capacities efficiently with multi-intensity measures of seismic event. Accounting for the uncertainties of the bridge model, ten single-bent overpass bridge structures are taken as samples statistically using Latin hypercube sampling approach. 200 earthquake records are chosen randomly for the uncertainties of ground motions according to the site condition of the bridges. The uncertainties of structural capacity and seismic demand are evaluated with the ratios of demand to capacity in different damage state. By comparing the relative importance of different intensity measures, Sa（T1） and Sa（T2） are chosen as viM. Then, the vector-valued fragility functions of different bridge components are developed. Finally, the system-level vulnerability of the bridge based on viM is studied with Duunett- Sobel class correlation matrix which can consider the correlation effects of different bridge components. The study indicates that an increment IMs from a scalar IM to viM results in a significant reduction in the dispersion of fragility functions and in the uncertainties in evaluating earthquake risk. The feasibility and validity of the proposed vulnerability analysis method is validated and the bridge is more vulnerable than any components.

Uncertainty analysis of flow rate measurement for multiphase flow using CFD

The venturi meter has an advantage in its use,because it can measure flow without being much affected by the type of the measured fluid or flow conditions.Hence,it has excellent versatility and is being widely applied in many industries.The flow of a liquid containing air is a representative example of a multiphase flow and exhibits complex flow characteristics.In particular,the greater the gas volume fraction（GVF）,the more inhomogeneous the flow becomes.As a result,using a venturi meter to measure the rate of a flow that has a high GVF generates an error.In this study,the cause of the error occurred in measuring the flow rate for the multiphase flow when using the venturi meter for analysis by CFD.To ensure the reliability of this study,the accuracy of the multiphase flow models for numerical analysis was verified through comparison between the calculated results of numerical analysis and the experimental data.As a result,the Grace model,which is a multiphase flow model established by an experiment with water and air,was confirmed to have the highest reliability.Finally,the characteristics of the internal flow Held about the multiphase flow analysis result generated by applying the Grace model were analyzed to find the cause of the uncertainty occurring when measuring the flow rate of the multiphase flow using the venturi meter.A phase separation phenomenon occurred due to a density difference of water and air inside the venturi,and flow inhomogeneity happened according to the flow velocity difference of each phase.It was confirmed that this flow inhomogeneity increased as the GVF increased due to the uncertainty of the flow measurement.

Measurement uncertainty in pharmaceutical analysis and its application

The measurement uncertainty provides complete information about an analytical result. This is very important because several decisions of compliance or non-compliance are based on analytical results in pharmaceutical industries. The aim of this work was to evaluate and discuss the estimation of uncertainty in pharmaceutical analysis. The uncertainty is a useful tool in the assessment of compliance or non-compliance of in-process and final pharmaceutical products as well as in the assessment of pharmaceutical equivalence and stability study of drug products.

ONE-WAY MULTIVARIATE REPEATED MEASUREMENTS ANALYSIS OF VARIANCE MODEL

The one-way multivariate repeated measurements analysis of variance (1-way MRM ANOVA) model for complete data and the sphericity test are studied.

In-situ strain measurement and error analysis of arc welding with 2D digital image correlation

The deformation and residual stress generated by the welding process can seriously affect the use of components.As a result,it is very important to understand the evolution of stress and strain during the welding process.The strain measurement method based on digital image correlation(DIC)is an excellent method to detect welding strain and residual stress.The out-of-plane translation and out-of-plane rotation introduce errors to the two-dimensional DIC.In this paper,the causes of errors are analyzed theoretically,and the formulas of errors caused by the out-of-plane displacement and the out-of-plane rotation are derived.The out-of-plane translation experiment and the out-of-plane rotation experiment were carried out to verify the theory,and the experimental results are consistent with the theoretical analysis results.The error caused by the out-of-plane translation can be reduced by increasing the object distance;the error caused by the out-of-plane rotation is greatly affected by the rotation angle.

Seismic fragility analysis of clay-pile-pier systems considering the optimization of ground motion intensity measures

The performance of clay-pile-pier system under earthquake shaking was comprehensively examined via three-dimensional finite element analyses,in which the complex stress-strain relationships of a clay and piled pier system were depicted by a hyperbolic-hysteretic and an equivalent elastoplastic model,respectively.One hundred twenty ground motions with varying peak accelerations were considered,along with the variations in bridge superstructure mass and pile flexural rigidity.Comprehensive comparison studies suggested that peak pile-cap acceleration and peak pile-cap velocity are the optimal ground motion intensity measures for seismic responses of the pier and the pile,respectively.Furthermore,based on two optimal ground motion intensity measures and using curvature ductility to quantify different damage states,seismic fragility analyses were performed.The pier generally had no evident damage except when the bridge girder mass was equal to 960 t,which seemed to be comparatively insensitive to the varying pile flexural rigidity.In comparison,the pile was found to be more vulnerable to seismic damage and its failure probabilities tended to clearly reduce with the increment of pile flexural rigidity,while the influence of the bridge girder mass was relatively minor.

Optimization Study of Outburst Prevention Measures for Tuzhu Coal Mine Based on Fixed Weight Clustering Analysis

Affected by many involved factors, different dimensions, data with large difference, incomplete information and so on, the most optimal selection of regional outburst prevention measures for outburst mine has become a complicated system project. The traditional way of outburst prevention measure selection belongs to qualitative method, which may cause high-cost of gas control, huge quantities of drilling work, long construction time and even secondary disaster. To solve the above-mentioned problems, in light of occurrence status of coal seam gas in No. 21 mining area of Jinzhushan Tuzhu Mine, through grey fixed weight clustering theory and a combination method of qualitative and quantitative analysis, the judging model with multi-objective classification for optimization of outburst prevention measures was established. The three weight coefficients of outburst prevention technology scheme are sorted, in order to determine the advantages and disadvantages of each outburst prevention technology scheme under the comprehensive evaluation of multi-target. Finally, the problem of quantitative selection for regional outburst prevention technology scheme is solved under the situation of multi-factor mode and incomplete information, which provides reasonable and effective technical measures for prevention of coal and gas outburst disaster.

Workflow logs analysis system for enterprise performance measurement

Workflow logs that record the execution of business processes offer very valuable data resource for real-time enterprise performance measurement. In this paper, a novel scheme that uses the technology of data warehouse and OLAP to explore workflow logs and create complex analysis reports for enterprise performance measurement is proposed. Three key points of this scheme are studied: 1) the measure set; 2) the open and flexible architecture for workflow logs analysis system; 3) the data models in WFMS and data warehouse. A case study that shows the validity of the scheme is also provided.

Radiation Damage Analysis of Individual Subcells for GaInP/GaAs/Ge Solar Cells Using Photoluminescence Measurements

The radiation damage of three individual subcells for GalnP/GaAs//Ge triple-junction solar cells irradiated with electrons and protons is investigated using photoluminescence （PL） measurements. The PL spectra of each subcell are obtained using different excitation lasers. The PL intensity has a fast degradation after irradiation, and decreases as the displacement damage dose increases. Furthermore, the normalized PL intensity varying with the displacement damage dose is analyzed in detail, and then the lifetime damage coefficients of the recombination centers for GaInP top-cell, GaAs mid-cell and Ge bottom-cell of the triple-junction solar cells are determined from the PL radiative efficiency.

Spectrum Occupancy Measurement and Analysis

This paper analyzes current spectrum utilization from all aspects based on related methods of spectrum measurement. The measurement results show that some spectrum resources are not used effectively due to current fixed spectrum allocation policy, and the spectrum occupancy varies dramatically in terms of time and space. These results provide basis for the development of next generation wireless communication technologies such as Cognitive Radio (CR).

Mechanical Analysis and Measurements of a Multicomponent NbTi/Cu Superconducting Magnets Structure for the Fully Superconducting Electron Cyclotron Resonance Ion Source

A fully superconducting electron cyclotron resonance （ECR） ion source （SECRAL ID is currently being built in the Institute of Modern Physics, Chinese Academy of Sciences. Its key components are three superconducting solenoids （Nb-Ti/Cu） and six superconducting sextupoles （Nb-Ti/Cu）. Different from the conventional supercon- ducting ECR magnetic structure, the SEC17AL Ⅱ includes three superconducting solenoid coils＇ that are located inside the superconducting sextupoles. The SECRAL Ⅱ can significantly reduce the interaction forces between the sextupole and the solenoids, and the magnets can also be more compact in size. For this multi-component SECRAL Ⅱ generating its self field of -8 T and being often exposed to the high self field, the mechanical analysis has become the main issue to keep their stress at 〈200 MPa on coils. The analytical and experimental results in mechanics are presented in the SECRAL Ⅱ structure. To improve the accuracy and efficiency of analysis, according to the composite rule of micromechanics, the equivalent uniform windings are used to simulate the epoxy-impregnated Nb-Ti/Cu coils. In addition, using low temperature strain gauges and a wireless fast strain acquisition system, a fundamental experiment on the based on our analysis, the stresses and deformations optimized. strains developments of a sextupole is reported. Finally, for its assembly of each SECRAL Ⅱ coil will be further

Analysis of a Lightning Strike Accident of a Rural House and Defensive Measures

A lightning strike accident of a residential house in the rural areas of Neijiang is analyzed through on-site investigation,and the causes are discussed. Defensive measures of lightning disasters are proposed to provide reference for the prevention of lightning disasters in the construction of new countryside.

Flux measurements for a DD neutron generator using neutron activation analysis

The fast and maximum thermal neutron fluxes from the DD-109 neutron generator at the University of Sharjah were experimentally measured by the activation technique using different neutron reactions. The thermal and fast neutron fluxes were found to be 2.960 × 10~6 and6.186 × 10~7 n/cm^2 s, respectively. This was done to verify the modeling results for the optimum moderator thickness needed to maximize the thermal neutron flux. The optimum moderator thickness was found to be between 3.5 and4 cm. The present data were compared with the detailed MCNP model-based calculation performed in earlier work to simulate the generator.

Comparative Analysis on Two Kinds of Measurement Methods of Particulate Matters in Waste Gas of Low Velocity

In the current waste gas sampling of fixed source,it is required that deviation of tracking rate of constant velocity sampling should not be more than 10%.When flow rate of the waste gas is less than 5 m/s,the tracking rate can not meet this requirement.The sampling of fixed velocity can meet the requirement of particulate matter sampling on gas collection volume at low velocity.Through the comparison of two different methods for the determination of particulate matter in waste gas under the low flow velocity of flue gas,it was found that there were some differences between the fixed velocity measurement and the constant velocity measurement.The results showed that measurement result of the fixed velocity was higher than that of constant velocity measurement under low velocity.At the same time,the deviation of fixed velocity measurement was not obvious under different low velocity.

MEASUREMENT AND CORRELATIVE ANALYSIS OF THE ADULT CHINESE MANDIBULAR ARCHES

One hundred fifty three mandibles of adult Chinese cadavers were measured. The acquired data were correlatively analysed with computer. It was found that bigonial breadth (EE’) was correlated with the breadth between bilateral canines (BB’), the bimentalbreite (CC’) and the breadth between right and left vertex of alveolar ridge between the first and the second molar (DD’). The length of mandibular body (AF) was strongly correlated with the vertical distance from bigonial breadth to the breadth of bilateral canines (BB’F), to the bimentalbreite (CC’F) and to the breadth between right and left vertex of alveolar ridge between the first and the second molar (DD’F). Six regressive equations were established. Significance of these equations was discussed.

Importance Measure Analysis for Use in Dynamic Performance Design of a Co-cured Composite Damping Instrument Panel

For the best dynamic performance of a co-cured composite damping instrument panel with light weight and high strength, a multilayer sandwich structure with polymethaerylimide （PMI） foam combined with embedded and co-cured composite damping structure is proposed. The struetue can maintain the excellent mechanical properties of composite materials, and achieve the damping and light effect at the same time. Input variables which may affect the dynamic performance of the instrument panel were selected and variance based importance measure was analyzed through multi- finite element method （FEM） analysis. Using the results of the importance measure analysis, with other design requirements, the important design variable was optimized and an instrument panel with the best dynamic performance under the requirements of light weight and high strength was obtained. The structure of the instrument panel can provide reference for the design of precision, high speed, and dynamic composite component. The importance measure analysis of dynamic performance of the instrument panel can provide a reference for relative design.