期刊文献+
共找到3,508篇文章
< 1 2 176 >
每页显示 20 50 100
Effect of NaCl Concentration on the Cumulative Strain and Pore Distribution of Clay under Cyclic Loading
1
作者 Xinshan Zhuang Shunlei Xia Ruijie Pan 《Fluid Dynamics & Materials Processing》 EI 2024年第2期447-461,共15页
Clay,as the most common soil used for foundationfill,is widely used in various infrastructure projects.The phy-sical and mechanical properties of clay are influenced by the pore solution environment.This study uses a GD... Clay,as the most common soil used for foundationfill,is widely used in various infrastructure projects.The phy-sical and mechanical properties of clay are influenced by the pore solution environment.This study uses a GDS static/dynamic triaxial apparatus and nuclear magnetic resonance experiments to investigate the effects of cyclic loading on clay foundations.Moreover,the development of cumulative strain in clay is analyzed,and afitting model for cumulative plastic strain is introduced by considering factors such as NaCl solution concentration,con-solidation stress ratio,and cycle number.In particular,the effects of the NaCl solution concentration and con-solidation stress ratio on the pore distribution of the test samples before and after cyclic loading are examined,and the relationship between microscopic pore size and macroscopic cumulative strain is obtained accordingly.Our results show that as the consolidation stress ratio grows,an increasing number of large pores in the soil samples are transformed into small pores.As the NaCl solution concentration becomes higher,the number of small pores gradually decreases,while the number of large pores remains unchanged.Cyclic loading causes the disappearance of the large pores in the samples,and the average pore size before cyclic loading is posi-tively correlated with the axial cumulative strain after cyclic loading.The cumulative strain produced by the soil under cyclic loading is inversely proportional to the NaCl solution concentration and consolidation stress ratio. 展开更多
关键词 Geotechnical engineering CLAY cyclic loading nuclear magnetic resonance NaCl solution consolidation ratio accumulative strain
下载PDF
Investigates of substrate mingling ratio and organic loading rate of KOH pretreated corn stover and pig manure in batch and semi-continuous system:Anaerobic digestion performance and microbial characteristics
2
作者 Chenyang Zhu Ruoran Qu +2 位作者 Xiujin Li Xiaoyu Zuo Hairong Yuan 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2023年第10期114-123,共10页
The effects of substrate mingling ratio(SMR)(1:1,1:2,1:3,3:1,and 2:1)and organic loading rate(OLR)(50-90 g total solids per liter per day)on anaerobic co-digestion performance and microbial characteristics were invest... The effects of substrate mingling ratio(SMR)(1:1,1:2,1:3,3:1,and 2:1)and organic loading rate(OLR)(50-90 g total solids per liter per day)on anaerobic co-digestion performance and microbial characteristics were investigated for pig manure(PM)and pretreated/untreated corn stover in batch and semicontinuous anaerobic digestion(AD)system.The results showed that SMR and pretreatment affected co-digestion performance.The maximum cumulative methane yield of 428.5 ml·g^(-1)(based on volatile solids(VS))was obtained for PCP13,which was 35.7%and 40.0%higher than that of CSU and PM.In the first 5 days,the maximum methane yield improvement rate was 378.1%for PCP13.The daily methane yield per gram VS of PCP13 was 11.4%-18.5%higher than that of PC_(U)13.Clostridium_sensu_stricto_1,DMER64,and Bacteroides and Methanosaeta,Methanobacterium,and Methanospirillum had higher relative abundance at the genus level.Therefore,SMR and OLR are important factor affecting the AD process,and OLR can affect methane production through volatile fatty acids. 展开更多
关键词 Substrate mingling ratio Organic loading rate CO-DIGESTION Corn stover Pig manure Microbial community
下载PDF
Mechanical behavior of 2G NPR bolt anchored rock samples under static disturbance loading
3
作者 WANG Jiong JIANG Jian +4 位作者 WANG Siyu CHANG Yiwen LIU Peng HE Manchao CHENG Shuang 《Journal of Mountain Science》 SCIE CSCD 2024年第7期2494-2516,共23页
The deep mining of coal resources is accompanied by severe environmental challenges and various potential engineering hazards.The implementation of NPR(negative Poisson's ratio)bolts are capable of controlling lar... The deep mining of coal resources is accompanied by severe environmental challenges and various potential engineering hazards.The implementation of NPR(negative Poisson's ratio)bolts are capable of controlling large deformations in the surrounding rock effectively.This paper focuses on studying the mechanical properties of the NPR bolt under static disturbance load.The deep nonlinear mechanical experimental system was used to study the mechanical behavior of rock samples with different anchored types(unanchored/PR anchored/2G NPR anchored)under static disturbance load.The whole process of rock samples was taken by high-speed camera to obtain the real-time failure characteristics under static disturbance load.At the same time,the acoustic emission signal was collected to obtain the key characteristic parameters of acoustic emission such as acoustic emission count,energy,and frequency.The deformation at the failure of the samples was calculated and analyzed by digital speckle software.The findings indicate that the failure mode of rock is influenced by different types of anchoring.The peak failure strength of 2G NPR bolt anchored rock samples exhibits an increase of 6.5%when compared to the unanchored rock samples.The cumulative count and cumulative energy of acoustic emission exhibit a decrease of 62.16%and 62.90%,respectively.The maximum deformation of bearing capacity exhibits an increase of 59.27%,while the failure time demonstrates a delay of 42.86%.The peak failure strength of the 2G NPR bolt anchored ones under static disturbance load exhibits an increase of 5.94%when compared to the rock anchored by PR(Poisson's ratio)bolt.The cumulative count and cumulative energy of acoustic emission exhibit a decrease of 47.16%and 43.86%,respectively.The maximum deformation of the bearing capacity exhibits an increase of 50.43%,and the failure time demonstrates a delay of 32%.After anchoring by 2G NPR bolt,anchoring support effectively reduces the risk of damage caused by static disturbance load.These results demonstrate that the support effect of 2G NPR bolt materials surpasses that of PR bolt. 展开更多
关键词 Anchored rock samples Static disturbance load Acoustic emission characteristics Digital speckle Negative Poisson's ratio
下载PDF
Evolution of mechanical parameters of Shuangjiangkou granite under different loading cycles and stress paths
4
作者 Liangjie Gu Xia-Ting Feng +2 位作者 Rui Kong Chengxiang Yang Yuelin Xia 《Journal of Rock Mechanics and Geotechnical Engineering》 SCIE CSCD 2024年第4期1113-1126,共14页
Surrounding rocks at different locations are generally subjected to different stress paths during the process of deep hard rock excavation.In this study,to reveal the mechanical parameters of deep surrounding rock und... Surrounding rocks at different locations are generally subjected to different stress paths during the process of deep hard rock excavation.In this study,to reveal the mechanical parameters of deep surrounding rock under different stress paths,a new cyclic loading and unloading test method for controlled true triaxial loading and unloading and principal stress direction interchange was proposed,and the evolution of mechanical parameters of Shuangjiangkou granite under different stress paths was studied,including the deformation modulus,elastic deformation increment ratios,fracture degree,cohesion and internal friction angle.Additionally,stress path coefficient was defined to characterize different stress paths,and the functional relationships among the stress path coefficient,rock fracture degree difference coefficient,cohesion and internal friction angle were obtained.The results show that during the true triaxial cyclic loading and unloading process,the deformation modulus and cohesion gradually decrease,while the internal friction angle gradually increases with increasing equivalent crack strain.The stress path coefficient is exponentially related to the rock fracture degree difference coefficient.As the stress path coefficient increases,the degrees of cohesion weakening and internal friction angle strengthening decrease linearly.During cyclic loading and unloading under true triaxial principal stress direction interchange,the direction of crack development changes,and the deformation modulus increases,while the cohesion and internal friction angle decrease slightly,indicating that the principal stress direction interchange has a strengthening effect on the surrounding rocks.Finally,the influences of the principal stress interchange direction on the stabilities of deep engineering excavation projects are discussed. 展开更多
关键词 Triaxial cyclic loading and unloading test Stress path Deformation modulus and elastic deformation increment ratios Fracture degree Cohesion and internal friction angle
下载PDF
Optimal allocation method of electric/air braking force of high-speed train considering axle load transfer
5
作者 Feng Guo Jing He 《High-Speed Railway》 2024年第2期77-84,共8页
Reasonable distribution of braking force is a factor for a smooth,safe,and comfortable braking of trains.A dynamic optimal allocation strategy of electric-air braking force is proposed in this paper to solve the probl... Reasonable distribution of braking force is a factor for a smooth,safe,and comfortable braking of trains.A dynamic optimal allocation strategy of electric-air braking force is proposed in this paper to solve the problem of the lack of consideration of adhesion difference of train wheelsets in the existing high-speed train electric-air braking force optimal allocation strategies.In this method,the braking strategy gives priority to the use of electric braking force.The force model of a single train in the braking process is analyzed to calculate the change of adhesion between the wheel and rail of each wheelset after axle load transfer,and then the adhesion of the train is estimated in real time.Next,with the goal of maximizing the total adhesion utilization ratio of trailer/motor vehicles,a linear programming distribution function is constructed.The proportional coefficient of adhesion utilization ratio of each train and the application upper limit of braking force in the function is updated according to the change time point of wheelset adhesion.Finally,the braking force is dynamically allocated.The simulation results of Matlab/Simulink show that the proposed algorithm not only uses the different adhesion limits of each trailer to reduce the total amount of braking force undertaken by the motor vehicle,but also considers the adhesion difference of each wheelset.The strategy can effectively reduce the risk and time of motor vehicles during the braking process and improve the stability of the train braking. 展开更多
关键词 Braking force allocation WHEELSET Dynamicity Axle load transfer total Adhesion utilization ratio
下载PDF
Effects of aspect ratio and loading rate on room-temperature mechanical properties of Cu-based bulk metallic glasses 被引量:1
6
作者 蔡安辉 刘咏 +6 位作者 吴宏 丁大伟 安伟科 周果君 罗云 彭勇宜 李小松 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2016年第10期2617-2632,共16页
Room-temperature mechanical properties of Cu50Zr40Ti10-xNix(0≤x≤4,mole fraction,%) bulk metallic glasses (BMG) with aspect ratios in the range of 1:1-2.5:1 and loading rates in the range of1×10^-5-1×... Room-temperature mechanical properties of Cu50Zr40Ti10-xNix(0≤x≤4,mole fraction,%) bulk metallic glasses (BMG) with aspect ratios in the range of 1:1-2.5:1 and loading rates in the range of1×10^-5-1×10^-2s^-1were systematically investigated by room-temperatureuniaxialcompression test.In the condition of an aspect ratio of 1:1, the superplasticity can be clearly observed for Cu50Zr40Ti10BMG when the loading rate is1×10^-4s^-1, while for Cu50Zr40Ti10-xNix(x=1-3, mole fraction, %) BMGs when the loading rate is1×10^-2s^-1. The plastic strain (εp), yielding strength (σy) and fracture strength (σf) of the studied Cu-based BMGs significantly depend on the aspect ratio and the loading rate. In addition, theσyof the studied Cu-based BMGs with an aspect ratio of 1:1 is close to the σfof those with the other aspect ratios when the loading rate is1×10^-2s^-1. The mechanism for the mechanical response to the loading rate and the aspect ratiowas also discussed. 展开更多
关键词 Cu-based bulk metallic glasses aspect ratio loading rate PLASTICITY STRENGTH
下载PDF
Impact of box ratio and pinwheel pattern on the pallet loading problem 被引量:1
7
作者 伊俊敏 王笃鹏 周晶 《Journal of Southeast University(English Edition)》 EI CAS 2009年第2期267-270,共4页
The pinwheel pattern as a suitable and advantageous alternative for the loading implementation of the pallet loading problem (PLP) is identified after a survey on the loading pattern. The definitions, elements, cate... The pinwheel pattern as a suitable and advantageous alternative for the loading implementation of the pallet loading problem (PLP) is identified after a survey on the loading pattern. The definitions, elements, categories, generating algorithms of the pinwheel pattern are discussed and a uniform symmetric pinwheel notation is proposed. Based on the forming geometry of a pinwheel, the pinwheel structure is analyzed in terms of the innate box ratio, the box/block orientation and the box number by combinatorial and geometrical methods. A revised data set for the PLP with an area ratio range from 1 to 76 and a box ratio range from 1 to 10 is proposed. All pinwheel instances with this data set are calculated, and box ratio range is obtained for each possible pinwheel pattern, which can be found for all non-prime numbers of boxes. And a high box ratio makes an optimal pinwheel pattern more likely appear. Results identify the impact of the above pinwheel pattern and the box ratio on the pallet loading problem. 展开更多
关键词 PACKING pallet loading problem loading pattern box ratio pinwheel pattern
下载PDF
Feasibility study on buoyancy-weight ratios of a submerged floating tunnel prototype subjected to hydrodynamic loads 被引量:7
8
作者 Xu Long Fei Ge Youshi Hong 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 2015年第5期750-761,共12页
The research progress of a novel traffic solution,a submerged floating tunnel(SFT),is reviewed in terms of a study approach and loading scenario.Among existing publications,the buoyancy-weight ratio(BWR) is usuall... The research progress of a novel traffic solution,a submerged floating tunnel(SFT),is reviewed in terms of a study approach and loading scenario.Among existing publications,the buoyancy-weight ratio(BWR) is usually predefined.However,BWR is a critical structural parameter that tremendously affects the dynamic behaviour of not only the tunnel tube itself but also the cable system.In the context of a SFT prototype(SFTP) project in Qiandao Lake(Zhejiang Province,China),the importance of BWR is illustrated by finite element analysis and subsequently,an optimized BWR is proposed within a reasonable range in the present study.In the numerical model,structural damping is identified to be of importance.Rayleigh damping and the corresponding Rayleigh coefficients are attained through a sensitivity study,which shows that the adopted damping ratios are fairly suitable for SFTP.Lastly,the human sense of security is considered by quantifying the comfort index,which helps further optimize BWR in the SFTP structural parameter design. 展开更多
关键词 Submerged floating tunnel Buoyancy-weight ratio Water wave and current loads Dynamic response Human security sense Comfort index
下载PDF
Numerical investigation on free air blast loads generated from center-initiated cylindrical charges with varied aspect ratio in arbitrary orientation 被引量:5
9
作者 Chu Gao Xiang-zhen Kong +2 位作者 Qin Fang Jian Hong Yin Wang 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2022年第9期1662-1678,共17页
In current guidelines, the free air blast loads(overpressure and impulse) are determined by spherical charges, although most of ordnance devices are more nearly cylindrical than spherical in geometry. This may result ... In current guidelines, the free air blast loads(overpressure and impulse) are determined by spherical charges, although most of ordnance devices are more nearly cylindrical than spherical in geometry. This may result in a great underestimation of blast loads in the near field and lead to an unsafe design.However, there is still a lack of systematic quantitative analysis of the blast loads generated from cylindrical charges. In this study, a numerical model is developed by using the hydrocode AUTODYN to investigate the influences of aspect ratio and orientation on the free air blast loads generated from center-initiated cylindrical charges. This is done by examining the pressure contours, the peak overpressures and impulses for various aspect ratios ranged from 1 to 8 and arbitrary orientation monitored along every azimuth angle with an interval of 5°. To characterize the distribution patterns of blast loads,three regions, i.e., the axial region, the vertex region and the radial region are identified, and the propagation of blast waves in each region is analyzed in detail. The complexity of blast loads of cylindrical charges is found to result from the bridge wave and its interaction with primary waves. Several empirical formulas are presented based on curve-fitting the numerical data, including the orientation where the maximum peak overpressure emerges, the critical scaled distance beyond which the charge shape effect could be neglected and blast loads with varied aspect ratio in arbitrary orientation, all of which are useful for blast-resistant design. 展开更多
关键词 Cylindrical charge Blast loads Aspect ratio Azimuth angle Bridge wave
下载PDF
Influence of Axial Load Ratio on Shear Behavior of Through-Diaphragm Connections of Concrete-Filled Square Steel Tubular Columns 被引量:2
10
作者 张广泰 韩建红 +1 位作者 荣彬 Apostolos Fafitis 《Transactions of Tianjin University》 EI CAS 2015年第4期341-346,共6页
Nonlinear finite element analysis and parametric studies were carried out to study the influence of axial load ratio on the shear behavior of the through-diaphragm connections of concrete-filled square steel tubular c... Nonlinear finite element analysis and parametric studies were carried out to study the influence of axial load ratio on the shear behavior of the through-diaphragm connections of concrete-filled square steel tubular columns. The analysis reveals that smaller axial load ratio can improve the shear bearing capacity and ductility while larger axial load ratio will decrease the shear behavior of the through-diaphragm connections. The parametric studies indicate that the axial load ratio should be limited to less than 0.4 and its influence should be considered in the analysis and design of such connections. 展开更多
关键词 through-diaphragm connection concrete-filled square steel TUBULAR COLUMN AXIAL load ratio shearbearing capacity DUCTILITY
下载PDF
Calibration of LRFD Format for Steel Jacket OffshorePlatform in China Offshore Area(2): Load, Resistance and Load Combination Factors 被引量:1
11
作者 周道成 段忠东 欧进萍 《China Ocean Engineering》 SCIE EI 2006年第2期199-212,共14页
Adopting the load and resistance factor design format, the design method for steel jaeket platform structures is developed. Firstly, the limit state equations and design format for steel jacket platform structures are... Adopting the load and resistance factor design format, the design method for steel jaeket platform structures is developed. Firstly, the limit state equations and design format for steel jacket platform structures are introduced. Then, the ratio of live load effect to dead load effect is estimated. The target reliabilities for design of offshore structures in China offshore area are calibrated by past practice in API RP2A-WSD code. The load and resistance factors are optimized by minimizing the difference within the target reliability and the resulting reliability over the range of load effect ratios. Considering the concurrence of different loads, load combination factors are obtained through an optimization process, and the relation between the load combination factor and load correlation coefficient is established. Finally, the design formulae for steel jacket structures in China offshore area are recommended. 展开更多
关键词 steel jacket offshore platform load effect ratio target reliability load and resistance factor load combination factor
下载PDF
Optimizing loading path and die linetype of large length-to-diameter ratio metal stator screw lining hydroforming 被引量:2
12
作者 祝效华 石昌帅 童华 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第1期224-231,共8页
In order to meet the high temperature environment requirement of deep and superdeep well exploitation, a technology of large length-to-diameter ratio metal stator screw lining meshing with rotor is presented. Based on... In order to meet the high temperature environment requirement of deep and superdeep well exploitation, a technology of large length-to-diameter ratio metal stator screw lining meshing with rotor is presented. Based on the elastic-plasticity theory, and under the consideration of the effect of tube size, material mechanical parameters, friction coefficient and loading paths, the external pressure plastic forming mechanical model of metal stator screw lining is established, to study the optimal loading path of metal stator lining tube hydroforming process. The results show that wall thickness reduction of the external pressure tube hydroforming(THF) is about 4%, and three evaluation criteria of metal stator screw lining forming quality are presented: fillet stick mold coefficient, thickness relative error and forming quality coefficient. The smaller the three criteria are, the better the forming quality is.Each indicator has a trend of increase with the loading rate reducing, and the adjustment laws of die arc transition zone equidistance profile curve are acquired for improving tube forming quality. Hence, the research results prove the feasibility of external pressure THF used for processing high-accuracy large length-to-diameter ratio metal stator screw lining, and provide theoretical basis for designing new kind of stator structure which has better performance and longer service life. 展开更多
关键词 tube hydroforming loading path large length-to-diameter ratio metal stator lining simulation
下载PDF
The Experimental Simulation of Rocks on Load/Unload Response Ratio for Earthquake Prediction 被引量:3
13
作者 Wang Yucang, Yin Xiangchu, and Wang HaitaoLaboratory for Non-linear Mechanics of Continuous Media (LNM), Institute of Mechanics,Chinese Academy of Sciences, Beijing 100080, ChinaLaboratory for Non-linear Mechanics of Continuous Media (LNM), Institute of Mechanics,Chinese Academy of Sciences, Beijing 100080, ChinaCenter for Analysis and Prediction , CSB, Beijing 100036, China 《Earthquake Research in China》 1998年第4期40-45,共6页
The load/unload experiments on rock failure under pressure have been carried out in Material Test System (MTS) in the Laboratory for Non-linear Mechanics of Continuous Media (LNM), Institute of Mechanics, Chinese Acad... The load/unload experiments on rock failure under pressure have been carried out in Material Test System (MTS) in the Laboratory for Non-linear Mechanics of Continuous Media (LNM), Institute of Mechanics, Chinese Academy of Sciences, and load/unload response ratio (LURR) values with strain as response (i.e. inverse elastic constant as response rate) have been obtained. The experimental results are in accordance with theoretical results and those in real earthquakes: LURR rises just before rock failure. So LURR can be used as the precursor of rock failure and earthquake prediction. 展开更多
关键词 load\Unload Response ratio Experiment of ROCK FAILURE EARTHQUAKE prediction.
下载PDF
Experimental Research on the Load/Unload Response Ratio (LURR) Theory 被引量:1
14
作者 YuHuaizhong YinXiangchu +8 位作者 LiangNaigang XiaMengfen LiMin XuZhaoyong PengKeyin VictorKukshenko WuZhishen QiLi SurgueiElizarov 《Earthquake Research in China》 2003年第3期227-235,共9页
Implementing acoustic emission experiments with large rock samples, LURR (Load/Unload Response Ratio) theory was studied. The loading conditions in the experiments were designed to simulate the complicated loading pro... Implementing acoustic emission experiments with large rock samples, LURR (Load/Unload Response Ratio) theory was studied. The loading conditions in the experiments were designed to simulate the complicated loading process of underground rocks. The damages emerging inside the rock samples were recorded by the acoustic emission technique during the loading process. The experimental results were consistent with prediction by LURR theory. Integrating the changing processes of LURR value Y and the location process of acoustic emission events showed agreement between the variation of LURR value Y and the damage evolution inside the rocks. Furthermore, the high value of Y emerged before the complete breakdown of materials. Therefore, the damage evolution of rock specimen can be quantitatively analyzed with LURR theory, thus the failure of the rock materials and the earthquake occurrence may be predicted. The experimental results gave a further verification of LURR theory. 展开更多
关键词 load/Unload Response ratio Acoustic emission Circling load Large sample Critical sensitivity
下载PDF
Modeling the blast load induced by a close-in explosion considering cylindrical charge parameters 被引量:3
15
作者 Yi Fan Li Chen +2 位作者 Zhan Li Heng-bo Xiang Qin Fang 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2023年第6期83-108,共26页
Structural damage is significantly influenced by the various parameters of a close-in explosion.To establish a close-in blast loading model for cylindrical charges according to these parameters,a series of field exper... Structural damage is significantly influenced by the various parameters of a close-in explosion.To establish a close-in blast loading model for cylindrical charges according to these parameters,a series of field experiments and a systematic numerical analysis were conducted.A high-fidelity finite element model developed using AUTODYN was first validated using blast data collected from field tests conducted in this and previous studies.A quantitative analysis was then performed to determine the influence of the charge shape,aspect ratio(length to diameter),orientation,and detonation configuration on the characteristics and distributions of the blast loading(incident peak overpressure and impulse)according to scaled distance.The results revealed that the secondary peak overpressure generated by a cylindrical charge was mainly distributed along the axial direction and was smaller than the overpressure generated by an equivalent spherical charge.The effects of charge shape on the blast loading at 45°and 67.5°in the axial plane could be neglected at scaled distances greater than 2 m/kg^(1/3);the effect of aspect ratios greater than 2 on the peak overpressure in the 90°(radial)direction could be neglected at all scaled distances;and double-end detonation increased the radial blast loading by up to 60%compared to singleend detonation.Finally,an empirical cylindrical charge blast loading model was developed considering the influences of charge aspect ratio,orientation,and detonation configuration.The results obtained in this study can serve as a reference for the design of blast tests using cylindrical charges and aid engineers in the design of blast-resistant structures. 展开更多
关键词 Cylindrical charge Secondary peak overpressure Aspect ratio ORIENTATION Detonation initiation point Blast loading model
下载PDF
Optimization of structural parameters for spatial flexible redundant manipulators with maximum ratio of load to mass 被引量:1
16
作者 ZHANG Xu-ping YU Yue-qing 《光学精密工程》 EI CAS CSCD 北大核心 2005年第5期561-569,共9页
Optimization of structural parameters aimed at improving the load carrying capacity of spatial flexible redundant manipulators is presented in this paper. In order to increase the ratio of load to mass of robots, the ... Optimization of structural parameters aimed at improving the load carrying capacity of spatial flexible redundant manipulators is presented in this paper. In order to increase the ratio of load to mass of robots, the cross-sectional parameters and constructional parameters are optimized respectively. The cross-sectional and configurational parameters are optimized simultaneously. The numerical simulation of a 4R spatial manipulator is performed. The results show that the load capacity of robots has been greatly improved through the optimization strategies proposed in this paper. 展开更多
关键词 调节器 结构参数 机器人 动力性质 KED
下载PDF
Influence of Vertical Load on Lateral-Loaded Monopiles by Numerical Simulation 被引量:1
17
作者 Qiang Li Pan Chen +2 位作者 Lihong Gao Dan Meng Jinjie Zou 《Computer Modeling in Engineering & Sciences》 SCIE EI 2023年第4期465-481,共17页
Monopiles are the most common foundation form of offshore wind turbines,which bear the vertical load,lateral load and bending moment.It remains uncertain whether the applied vertical load increases the lateral deflect... Monopiles are the most common foundation form of offshore wind turbines,which bear the vertical load,lateral load and bending moment.It remains uncertain whether the applied vertical load increases the lateral deflection of the pile.This paper investigated the influence of vertical load on the behaviour of monopiles installed in the sand under combined load using three-dimensional numerical methods.The commercial software PLAXIS was used for simulations in this paper.Monopiles were modelled as a structure incorporating linear elastic material behaviour and soil was modelled using the Hardening-Soil(HS)constitutive model.The monopiles under vertical load,lateral load and combined vertical and lateral loads were respectively studied taking into account the sequence of load application and pile slenderness ratio(L/D;L and D are the length and diameter of the pile).Results suggest that the sequence of load application plays a major role in how vertical load affects the deflection behaviour of the pile.Specifically,when L/D ratios obtained by lengthening the pile while keeping its diameter constant are 3,5 and 8,the relationships between lateral load and the deflection behaviour of the pile under the effect of vertical load demonstrate a similar trend.Furthermore,the cause of increased lateral capacity of the pile under the action of applied vertical load in the common practical application case and in the VPL case was analyzed by studying the variation law of soil stress along the pile embedment.Results confirm that the confining effect of vertical load increases means effective stress of the soil around the pile,thus increasing soil stiffness and pile capacity. 展开更多
关键词 PILE lateral capacity combined load sequence of load application L/D ratio
下载PDF
Short-term and imminent anomalies of earthquake of load and unload response ratio of the well level to earth tides
18
作者 张昭栋 陈学忠 +5 位作者 吴子泉 王梅 程烨 苏鸾声 王忠民 石荣会 《Acta Seismologica Sinica(English Edition)》 CSCD 1997年第2期73-81,共9页
In this paper, through the nonlinear response of rock strain and stress, we have analized the physical mechanism of loading and unloading response ratio of the well level to the earth tides,the respouse of an aquife... In this paper, through the nonlinear response of rock strain and stress, we have analized the physical mechanism of loading and unloading response ratio of the well level to the earth tides,the respouse of an aquifer of confined well to bulk strain tide and showed two methods of the calculation of loading and unloading response ratio of the well level to the earth tides. We took the example of the Yu 01 well, which is near the epicenter of Heze M S 5.9 earthquake, calculated the response rate and loading and unloading response ratio of two kinds of the earth tides of it. The response rate and response ratio before the earthquake had the variation of increase. 展开更多
关键词 loading and unloading response ratio earth tide well level Heze earthquake Yu 01 well
下载PDF
Physical meaning and prediction efficiency of the load/unload response ratio of rocks in strain-weakening phase before failure
19
作者 许昭永 杨润海 +3 位作者 王彬 赵晋明 王赟赟 梅世蓉 《Acta Seismologica Sinica(English Edition)》 CSCD 2002年第1期47-55,共9页
Rock experiment results indicate that the load/unload response ratio (LURR) of rocks expressed via strain energy may have singular or negative value after the stress in the rock reaches its maximum before rock failure... Rock experiment results indicate that the load/unload response ratio (LURR) of rocks expressed via strain energy may have singular or negative value after the stress in the rock reaches its maximum before rock failure or when the rock goes into the strain-weakening phase. The universality of this phenomenon is discussed. Expressed via strain or strain energy and the travel time of P wave, the variation form of the reciprocal of LURR during the process of rock failure preparation is derived. The results show that after a sharp decrease the reciprocal of LURR reaches its minimum when the main fracture of the rock is about to appear. This feature can be taken as an indication that the rock main fracture is impending. 展开更多
关键词 strain-weakening phase load/unload response ratio prediction efficiency
下载PDF
The tempo-spatial evolution characteristics of the load/unload response ratio before strong earthquakes in California of America and its predicting implications
20
作者 宋治平 尹祥础 +2 位作者 王裕仓 徐平 薛艳 《Acta Seismologica Sinica(English Edition)》 EI CSCD 2000年第6期628-635,共8页
In this paper, the tempo-spatial evolution characteristics of the load/unload response ratio (namely LURR or Y value) before strong earthquakes with magnitude over 6 during 1976~1994 in California of America are studi... In this paper, the tempo-spatial evolution characteristics of the load/unload response ratio (namely LURR or Y value) before strong earthquakes with magnitude over 6 during 1976~1994 in California of America are studied in detail. The results show that there appear some high-Y regions cohering with the regional tectonic trend in a great area 3~4 years before strong earthquakes and these high-Y regions migrate from the periphery to the epicenter region at a speed of tens of kilometers per year. The load/unload response ratio (LURR) anomalies near the epicenter region characterizes a type of (ascend ? descend( and appear and increase steeply until one year or less before most earthquakes. (Positive( earthquakes form usually a concentration area; in and near which the main shock occurs. We have analyzed the different and same characters of earthquakes between California of American and the Chinese mainland. Basing on these results, we discuss the approach and method how to predict and estimate the three parameters (place, time and magnitude) of a strong earthquake in California of American by applying the characteristics of the LURR. 展开更多
关键词 California of American the load/unload response ratio prediction method
下载PDF
上一页 1 2 176 下一页 到第
使用帮助 返回顶部