The residue curve maps are considered as a powerful tool for the preliminary design of reactive distillation. The residue curve maps of ethyl acetate synthesis reaction were calculated based on the pseudo-homogeneous ...The residue curve maps are considered as a powerful tool for the preliminary design of reactive distillation. The residue curve maps of ethyl acetate synthesis reaction were calculated based on the pseudo-homogeneous rate-based kinetic model and the NRTL activity coefficient model. The results show that the unstable node branch emerges from the ethyl acetate/water edge, moving toward the chemical equilibrium surface with the increase of Damkoeler value (D), and the node reaches the ternary reactive azeotrope when D-∞ eventually. Conceptual design for the ethyl acetate synthesis of reactive distillation based on the residue curve maps is presented at last.展开更多
Motivated by the definition of the machining errors induced by tool path planning methods, a mapping curve of the tool axis of a cylindrical cutter is constructed on the tool surface. The mapping curve is a typical on...Motivated by the definition of the machining errors induced by tool path planning methods, a mapping curve of the tool axis of a cylindrical cutter is constructed on the tool surface. The mapping curve is a typical one that can be used to express the closeness between the tool surface and the surface to be machined. A novel tool path planning method is proposed for flank or plunge milling ruled surfaces based on the minimization of the one-sided Hausdorff distance (HD) from the mapping curve to the surface to be machined. It is a nonlinear optimization problem in best uniform approximation (BUA) or Chebyshev sense. A mathematical programming model for computing the minimum one-sided HD is proposed. The linearization method of the programming model is provided and the final optimal solutions are obtained by simplex method. The effectiveness of the proposed BUA method is verified by two numerical examples and compared with the least squares (LS) and double point offset (DPO) methods. The variation in tool orientation induced by the optimization of the tool positions is also evaluated.展开更多
基金Project(2008-XY-6) supported by the Development of Science and Technology Start-up Fund of Fuzhou University, ChinaProject(XRC-0826) supported by the Talents Fund of Fuzhou University, China
文摘The residue curve maps are considered as a powerful tool for the preliminary design of reactive distillation. The residue curve maps of ethyl acetate synthesis reaction were calculated based on the pseudo-homogeneous rate-based kinetic model and the NRTL activity coefficient model. The results show that the unstable node branch emerges from the ethyl acetate/water edge, moving toward the chemical equilibrium surface with the increase of Damkoeler value (D), and the node reaches the ternary reactive azeotrope when D-∞ eventually. Conceptual design for the ethyl acetate synthesis of reactive distillation based on the residue curve maps is presented at last.
基金supported by the National Natural Science Foundation of China (51175065)
文摘Motivated by the definition of the machining errors induced by tool path planning methods, a mapping curve of the tool axis of a cylindrical cutter is constructed on the tool surface. The mapping curve is a typical one that can be used to express the closeness between the tool surface and the surface to be machined. A novel tool path planning method is proposed for flank or plunge milling ruled surfaces based on the minimization of the one-sided Hausdorff distance (HD) from the mapping curve to the surface to be machined. It is a nonlinear optimization problem in best uniform approximation (BUA) or Chebyshev sense. A mathematical programming model for computing the minimum one-sided HD is proposed. The linearization method of the programming model is provided and the final optimal solutions are obtained by simplex method. The effectiveness of the proposed BUA method is verified by two numerical examples and compared with the least squares (LS) and double point offset (DPO) methods. The variation in tool orientation induced by the optimization of the tool positions is also evaluated.