In this study, the problem of measuring noise pollution distribution by the intertial-based integrated navigation system is effectively suppressed. Based on nonlinear inertial navigation error modeling, a nested dual ...In this study, the problem of measuring noise pollution distribution by the intertial-based integrated navigation system is effectively suppressed. Based on nonlinear inertial navigation error modeling, a nested dual Kalman filter framework structure is developed. It consists of unscented Kalman filter (UKF)master filter and Kalman filter slave filter. This method uses nonlinear UKF for integrated navigation state estimation. At the same time, the exact noise measurement covariance is estimated by the Kalman filter dependency filter. The algorithm based on dual adaptive UKF (Dual-AUKF) has high accuracy and robustness, especially in the case of measurement information interference. Finally, vehicle-mounted and ship-mounted integrated navigation tests are conducted. Compared with traditional UKF and the Sage-Husa adaptive UKF (SH-AUKF), this method has comparable filtering accuracy and better filtering stability. The effectiveness of the proposed algorithm is verified.展开更多
Intelligent traffic control requires accurate estimation of the road states and incorporation of adaptive or dynamically adjusted intelligent algorithms for making the decision.In this article,these issues are handled...Intelligent traffic control requires accurate estimation of the road states and incorporation of adaptive or dynamically adjusted intelligent algorithms for making the decision.In this article,these issues are handled by proposing a novel framework for traffic control using vehicular communications and Internet of Things data.The framework integrates Kalman filtering and Q-learning.Unlike smoothing Kalman filtering,our data fusion Kalman filter incorporates a process-aware model which makes it superior in terms of the prediction error.Unlike traditional Q-learning,our Q-learning algorithm enables adaptive state quantization by changing the threshold of separating low traffic from high traffic on the road according to the maximum number of vehicles in the junction roads.For evaluation,the model has been simulated on a single intersection consisting of four roads:east,west,north,and south.A comparison of the developed adaptive quantized Q-learning(AQQL)framework with state-of-the-art and greedy approaches shows the superiority of AQQL with an improvement percentage in terms of the released number of vehicles of AQQL is 5%over the greedy approach and 340%over the state-of-the-art approach.Hence,AQQL provides an effective traffic control that can be applied in today’s intelligent traffic system.展开更多
The aging prediction of railway catenary is of profound significance for ensuring the regular operation of electrified trains.However,in real-world scenarios,accurate predictions are challenging due to various interfe...The aging prediction of railway catenary is of profound significance for ensuring the regular operation of electrified trains.However,in real-world scenarios,accurate predictions are challenging due to various interferences.This paper addresses this challenge by proposing a novel method for predicting the aging of railway catenary based on an improved Kalman filter(KF).The proposed method focuses on modifying the priori state estimate covariance and measurement error covariance of the KF to enhance accuracy in complex environments.By comparing the optimal displacement value with the theoretically calculated value based on the thermal expansion effect of metals,it becomes possible to ascertain the aging status of the catenary.To improve prediction accuracy,a railway catenary aging prediction model is constructed by integrating the Takagi-Sugeno(T-S)fuzzy neural network(FNN)and KF.In this model,an adaptive training method is introduced,allowing the FNN to use fewer fuzzy rules.The inputs of the model include time,temperature,and historical displacement,while the output is the predicted displacement.Furthermore,the KF is enhanced by modifying its prior state estimate covariance and measurement error covariance.These modifications contribute to more accurate predictions.Lastly,a low-power experimental platform based on FPGA is implemented to verify the effectiveness of the proposed method.The test results demonstrate that the proposed method outperforms the compared method,showcasing its superior performance.展开更多
For the last two decades,low-cost Global Navigation Satellite System(GNSS)receivers have been used in various applications.These receivers are mini-size,less expensive than geodetic-grade receivers,and in high demand....For the last two decades,low-cost Global Navigation Satellite System(GNSS)receivers have been used in various applications.These receivers are mini-size,less expensive than geodetic-grade receivers,and in high demand.Irrespective of these outstanding features,low-cost GNSS receivers are potentially poorer hardwares with internal signal processing,resulting in lower quality.They typically come with low-cost GNSS antenna that has lower performance than their counterparts,particularly for multipath mitigation.Therefore,this research evaluated the low-cost GNSS device performance using a high-rate kinematic survey.For this purpose,these receivers were assembled with an Inertial Measurement Unit(IMU)sensor,which actively transmited data on acceleration and orientation rate during the observation.The position and navigation parameter data were obtained from the IMU readings,even without GNSS signals via the U-blox F9R GNSS/IMU device mounted on a vehicle.This research was conducted in an area with demanding conditions,such as an open sky area,an urban environment,and a shopping mall basement,to examine the device’s performance.The data were processed by two approaches:the Single Point Positioning-IMU(SPP/IMU)and the Differential GNSS-IMU(DGNSS/IMU).The Unscented Kalman Filter(UKF)was selected as a filtering algorithm due to its excellent performance in handling nonlinear system models.The result showed that integrating GNSS/IMU in SPP processing mode could increase the accuracy in eastward and northward components up to 68.28%and 66.64%.Integration of DGNSS/IMU increased the accuracy in eastward and northward components to 93.02%and 93.03%compared to the positioning of standalone GNSS.In addition,the positioning accuracy can be improved by reducing the IMU noise using low-pass and high-pass filters.This application could still not gain the expected position accuracy under signal outage conditions.展开更多
In light of the prevailing issue that the existing convolutional neural network(CNN)power quality disturbance identification method can only extract single-scale features,which leads to a lack of feature information a...In light of the prevailing issue that the existing convolutional neural network(CNN)power quality disturbance identification method can only extract single-scale features,which leads to a lack of feature information and weak anti-noise performance,a new approach for identifying power quality disturbances based on an adaptive Kalman filter(KF)and multi-scale channel attention(MS-CAM)fused convolutional neural network is suggested.Single and composite-disruption signals are generated through simulation.The adaptive maximum likelihood Kalman filter is employed for noise reduction in the initial disturbance signal,and subsequent integration of multi-scale features into the conventional CNN architecture is conducted.The multi-scale features of the signal are captured by convolution kernels of different sizes so that the model can obtain diverse feature expressions.The attention mechanism(ATT)is introduced to adaptively allocate the extracted features,and the features are fused and selected to obtain the new main features.The Softmax classifier is employed for the classification of power quality disturbances.Finally,by comparing the recognition accuracy of the convolutional neural network(CNN),the model using the attention mechanism,the bidirectional long-term and short-term memory network(MS-Bi-LSTM),and the multi-scale convolutional neural network(MSCNN)with the attention mechanism with the proposed method.The simulation results demonstrate that the proposed method is higher than CNN,MS-Bi-LSTM,and MSCNN,and the overall recognition rate exceeds 99%,and the proposed method has significant classification accuracy and robust classification performance.This achievement provides a new perspective for further exploration in the field of power quality disturbance classification.展开更多
A wireless sensor network mobile target tracking algorithm(ISO-EKF)based on improved snake optimization algorithm(ISO)is proposed to address the difficulty of estimating initial values when using extended Kalman filte...A wireless sensor network mobile target tracking algorithm(ISO-EKF)based on improved snake optimization algorithm(ISO)is proposed to address the difficulty of estimating initial values when using extended Kalman filtering to solve the state of nonlinear mobile target tracking.First,the steps of extended Kalman filtering(EKF)are introduced.Second,the ISO is used to adjust the parameters of the EKF in real time to adapt to the current motion state of the mobile target.Finally,the effectiveness of the algorithm is demonstrated through filtering and tracking using the constant velocity circular motion model(CM).Under the specified conditions,the position and velocity mean square error curves are compared among the snake optimizer(SO)-EKF algorithm,EKF algorithm,and the proposed algorithm.The comparison shows that the proposed algorithm reduces the root mean square error of position by 52%and 41%compared to the SOEKF algorithm and EKF algorithm,respectively.展开更多
The goal of this work is to provide an understanding of estimation technology for both linear and nonlinear dynamical systems.A critical analysis of both the Kalman filter(KF)and the extended Kalman filter(EKF)will be...The goal of this work is to provide an understanding of estimation technology for both linear and nonlinear dynamical systems.A critical analysis of both the Kalman filter(KF)and the extended Kalman filter(EKF)will be provided,along with examples to illustrate some important issues related to filtering convergence due to system modeling.A conceptual explanation of the topic with illustrative examples provided in the paper can help the readers capture the essential principles and avoid making mistakes while implementing the algorithms.Adding fictitious process noise to the system model assumed by the filter designers for convergence assurance is being investigated.A comparison of estimation accuracy with linear and nonlinear measurements is made.Parameter identification by the state estimation method through the augmentation of the state vector is also discussed.The intended readers of this article may include researchers,working engineers,or engineering students.This article can serve as a better understanding of the topic as well as a further connection to probability,stochastic process,and system theory.The lesson learned enables the readers to interpret the theory and algorithms appropriately and precisely implement the computer codes that nicely match the estimation algorithms related to the mathematical equations.This is especially helpful for those readers with less experience or background in optimal estimation theory,as it provides a solid foundation for further study on the theory and applications of the topic.展开更多
It is quite often that the theoretic model used in the Kalman filtering may not be sufficiently accurate for practical applications,due to the fact that the covariances of noises are not exactly known.Our previous wor...It is quite often that the theoretic model used in the Kalman filtering may not be sufficiently accurate for practical applications,due to the fact that the covariances of noises are not exactly known.Our previous work reveals that in such scenario the filter calculated mean square errors(FMSE)and the true mean square errors(TMSE)become inconsistent,while FMSE and TMSE are consistent in the Kalman filter with accurate models.This can lead to low credibility of state estimation regardless of using Kalman filters or adaptive Kalman filters.Obviously,it is important to study the inconsistency issue since it is vital to understand the quantitative influence induced by the inaccurate models.Aiming at this,the concept of credibility is adopted to discuss the inconsistency problem in this paper.In order to formulate the degree of the credibility,a trust factor is constructed based on the FMSE and the TMSE.However,the trust factor can not be directly computed since the TMSE cannot be found for practical applications.Based on the definition of trust factor,the estimation of the trust factor is successfully modified to online estimation of the TMSE.More importantly,a necessary and sufficient condition is found,which turns out to be the basis for better design of Kalman filters with high performance.Accordingly,beyond trust factor estimation with Sage-Husa technique(TFE-SHT),three novel trust factor estimation methods,which are directly numerical solving method(TFE-DNS),the particle swarm optimization method(PSO)and expectation maximization-particle swarm optimization method(EM-PSO)are proposed.The analysis and simulation results both show that the proposed TFE-DNS is better than the TFE-SHT for the case of single unknown noise covariance.Meanwhile,the proposed EMPSO performs completely better than the EM and PSO on the estimation of the credibility degree and state when both noise covariances should be estimated online.展开更多
Unmanned aerial vehicles(UAVs)can be used to monitor traffic in a variety of settings,including security,traffic surveillance,and traffic control.Numerous academics have been drawn to this topic because of the challen...Unmanned aerial vehicles(UAVs)can be used to monitor traffic in a variety of settings,including security,traffic surveillance,and traffic control.Numerous academics have been drawn to this topic because of the challenges and the large variety of applications.This paper proposes a new and efficient vehicle detection and tracking system that is based on road extraction and identifying objects on it.It is inspired by existing detection systems that comprise stationary data collectors such as induction loops and stationary cameras that have a limited field of view and are not mobile.The goal of this study is to develop a method that first extracts the region of interest(ROI),then finds and tracks the items of interest.The suggested system is divided into six stages.The photos from the obtained dataset are appropriately georeferenced to their actual locations in the first phase,after which they are all co-registered.The ROI,or road and its objects,are retrieved using the GrabCut method in the second phase.The third phase entails data preparation.The segmented images’noise is eliminated using Gaussian blur,after which the images are changed to grayscale and forwarded to the following stage for additional morphological procedures.The YOLOv3 algorithm is used in the fourth step to find any automobiles in the photos.Following that,the Kalman filter and centroid tracking are used to perform the tracking of the detected cars.The Lucas-Kanade method is then used to perform the trajectory analysis on the vehicles.The suggested model is put to the test and assessed using the Vehicle Aerial Imaging from Drone(VAID)dataset.For detection and tracking,the model was able to attain accuracy levels of 96.7%and 91.6%,respectively.展开更多
To provide stable and accurate position information of control points in a complex coastal environment,an adaptive iterated extended Kalman filter(AIEKF)for fixed-point positioning integrating global navigation satell...To provide stable and accurate position information of control points in a complex coastal environment,an adaptive iterated extended Kalman filter(AIEKF)for fixed-point positioning integrating global navigation satellite system,inertial navigation system,and ultra wide band(UWB)is proposed.In thismethod,the switched global navigation satellite system(GNSS)and UWB measurement are used as the measurement of the proposed filter.For the data fusion filter,the expectation-maximization(EM)based IEKF is used as the forward filter,then,the Rauch-Tung-Striebel smoother for IEKF filter’s result smoothing.Tests illustrate that the proposed AIEKF is able to provide an accurate estimation.展开更多
Computer vision(CV)-based techniques have been widely used in the field of structural health monitoring(SHM)owing to ease of installation and cost-effectiveness for displacement measurement.This paper introduces compu...Computer vision(CV)-based techniques have been widely used in the field of structural health monitoring(SHM)owing to ease of installation and cost-effectiveness for displacement measurement.This paper introduces computer vision based method for robust displacement measurement under occlusion by incorporating random sample consensus(RANSAC).The proposed method uses the Kanade-Lucas-Tomasi(KLT)tracker to extract feature points for tracking,and these feature points are filtered through RANSAC to remove points that are noisy or occluded.With the filtered feature points,the proposed method incorporates Kalman filter to estimate acceleration from velocity and displacement extracted by the KLT.For validation,numerical simulation and experimental validation are conducted.In the simulation,performance of the proposed RANSAC filtering was validated to extract correct displacement out of group of displacements that includes dummy displacement with noise or bias.In the experiment,both RANSAC filtering and acceleration measurement were validated by partially occluding the target for tracking attached on the structure.The results demonstrated that the proposed method successfully measures displacement and estimates acceleration as compared to a reference displacement sensor and accelerometer,even under occluded conditions.展开更多
It is necessary to know the status of adhesion conditions between wheel and rail for efficient accelerating and decelerating of railroad vehicle.The proper estimation of adhesion conditions and their real-time impleme...It is necessary to know the status of adhesion conditions between wheel and rail for efficient accelerating and decelerating of railroad vehicle.The proper estimation of adhesion conditions and their real-time implementation is considered a challenge for scholars.In this paper,the development of simulation model of extended Kalman filter(EKF)in MATLAB/Simulink is presented to estimate various railway wheelset parameters in different contact conditions of track.Due to concurrent in nature,the Xilinx®System-on-Chip Zynq Field Programmable Gate Array(FPGA)device is chosen to check the onboard estimation ofwheel-rail interaction parameters by using the National Instruments(NI)myRIO®development board.The NImyRIO®development board is flexible to deal with nonlinearities,uncertain changes,and fastchanging dynamics in real-time occurring in wheel-rail contact conditions during vehicle operation.The simulated dataset of the railway nonlinear wheelsetmodel is tested on FPGA-based EKF with different track conditions and with accelerating and decelerating operations of the vehicle.The proposed model-based estimation of railway wheelset parameters is synthesized on FPGA and its simulation is carried out for functional verification on FPGA.The obtained simulation results are aligned with the simulation results obtained through MATLAB.To the best of our knowledge,this is the first time study that presents the implementation of a model-based estimation of railway wheelset parameters on FPGA and its functional verification.The functional behavior of the FPGA-based estimator shows that these results are the addition of current knowledge in the field of the railway.展开更多
The stability of the subsea oil and gas production system is heavily influenced by slug flow. One successful method of managing slug flow is to use top valve control based on subsea pipeline pressure. However, the com...The stability of the subsea oil and gas production system is heavily influenced by slug flow. One successful method of managing slug flow is to use top valve control based on subsea pipeline pressure. However, the complexity of production makes it difficult to measure the pressure of subsea pipelines, and measured values are not always accessible in real-time. The research introduces a technique for integrating Unscented Kalman Filter (UKF) and Wavelet Neural Network (WNN) to estimate the state of subsea pipeline pressure using historical data and a state model. The proposed method treats multiphase flow transport as a nonlinear model, with a dynamic WNN serving as the state observer. To achieve real-time state estimation, the WNN is included into the UKF algorithm to create a WNN-based UKF state equation. Integrate WNN and UKF in a novel way to predict system state accurately. The simulated results show that the approach can efficiently predict the inlet pressure and manage the slug flow in real-time using the riser's top pressure, outlet flow and valve opening. This method of estimate can significantly increase the control effect.展开更多
In this paper,a Millimeter wave(mmWave)beam tracking problem is studied in orthogonal time frequency space(OTFS)systems.Considering the nonlinearity of beamforming and the constraints of existing Kalman-filtering base...In this paper,a Millimeter wave(mmWave)beam tracking problem is studied in orthogonal time frequency space(OTFS)systems.Considering the nonlinearity of beamforming and the constraints of existing Kalman-filtering based beam tracking schemes,we propose a novel Cubature Kalman Filter(CKF)framework tracking the channel state information(CSI)to manage the challenge of highspeed channel variation in single-user moving scene for OTFS systems.Aiming for low complexity for mobile settings,this paper trains only one beam pair to track a path to maintain the reliable communication link in the analog beamforming architecture.Simulation results show that our proposed method has better tracking performance to improve the accuracy of the estimated beam angle compared with prior work.展开更多
Distributed drive electric vehicles(DDEVs)possess great advantages in the viewpoint of fuel consumption,environment protection and traffic mobility.Whereas the effects of inertial parameter variation in DDEV control s...Distributed drive electric vehicles(DDEVs)possess great advantages in the viewpoint of fuel consumption,environment protection and traffic mobility.Whereas the effects of inertial parameter variation in DDEV control system become much more pronounced due to the drastic reduction of vehicle weights and body size,and inertial parameter has seldom been tackled and systematically estimated.This paper presents a dual central difference Kalman filter(DCDKF)where two Kalman filters run in parallel to simultaneously estimate vehicle different dynamic states and inertial parameters,such as vehicle sideslip angle,vehicle mass,vehicle yaw moment of inertia,the distance from the front axle to centre of gravity.The proposed estimation method only integrates and utilizes real-time measurements of hub torque information and other in-vehicle sensors from standard DDEVs.The four-wheel nonlinear vehicle dynamics estimation model considering payload variations,Pacejka tire model,wheel and motor dynamics model is developed,the observability of the DCDKF observer is analysed and derived via Lie derivative and differential geometry theory.To address system nonlinearities in vehicle dynamics estimation,the DCDKF and dual extended Kalman filter(DEKF)are also investigated and compared.Simulation with various maneuvers are carried out to verify the effectiveness of the proposed method using Matlab/Simulink-CarsimR.The results show that the proposed DCDKF method can effectively estimate vehicle dynamic states and inertial parameters despite the existence of payload variations and variable driving conditions.This research provides a boot-strapping procedure which can performs optimal estimation to estimate simultaneously vehicle system state and inertial parameter with high accuracy and real-time ability.展开更多
To accurately predict traffic flow on the highways,this paper proposes a Convolutional Neural Network-Bi-directional Long Short-Term Memory-Attention Mechanism(CNN-BiLSTM-Attention)traffic flow prediction model based ...To accurately predict traffic flow on the highways,this paper proposes a Convolutional Neural Network-Bi-directional Long Short-Term Memory-Attention Mechanism(CNN-BiLSTM-Attention)traffic flow prediction model based on Kalman-filtered data processing.Firstly,the original fluctuating data is processed by Kalman filtering,which can reduce the instability of short-term traffic flow prediction due to unexpected accidents.Then the local spatial features of the traffic data during different periods are extracted,dimensionality is reduced through a one-dimensional CNN,and the BiLSTM network is used to analyze the time series information.Finally,the Attention Mechanism assigns feature weights and performs Soft-max regression.The experimental results show that the data processed by Kalman filter is more accurate in predicting the results on the CNN-BiLSTM-Attention model.Compared with the CNN-BiLSTM model,the Root Mean Square Error(RMSE)of the Kal-CNN-BiLSTM-Attention model is reduced by 17.58 and Mean Absolute Error(MAE)by 12.38,and the accuracy of the improved model is almost free from non-working days.To further verify the model’s applicability,the experiments were re-run using two other sets of fluctuating data,and the experimental results again demonstrated the stability of the model.Therefore,the Kal-CNN-BiLSTM-Attention traffic flow prediction model proposed in this paper is more applicable to a broader range of data and has higher accuracy.展开更多
We applied KF Particle, a Kalman Filter package for secondary vertex finding and fitting, to strange and open charm hadron reconstruction in heavy-ion collisions in the STAR experiment. Compared to the conventional he...We applied KF Particle, a Kalman Filter package for secondary vertex finding and fitting, to strange and open charm hadron reconstruction in heavy-ion collisions in the STAR experiment. Compared to the conventional helix swimming method used in STAR, the KF Particle method considerably improved the reconstructed Λ, Ω, and D~0 significance. In addition, the Monte Carlo simulation with STAR detector responses could adequately reproduce the topological variable distributions reconstructed in real data using the KF Particle method, thereby retaining substantial control of the reconstruction efficiency uncertainties for strange and open charm hadron measurements in heavy-ion collisions.展开更多
Compared with the study of single point motion of landslides,studying landslide block movement based on data from multiple monitoring points is of great significance for improving the accurate identification of landsl...Compared with the study of single point motion of landslides,studying landslide block movement based on data from multiple monitoring points is of great significance for improving the accurate identification of landslide deformation.Based on the study of landslide block,this paper regarded the landslide block as a rigid body in particle swarm optimization algorithm.The monitoring data were organized to achieve the optimal state of landslide block,and the 6-degree of freedom pose of the landslide block was calculated after the regularization.Based on the characteristics of data from multiple monitoring points of landslide blocks,a prediction equation for the motion state of landslide blocks was established.By using Kalman filtering data assimilation method,the parameters of prediction equation for landslide block motion state were adjusted to achieve the optimal prediction.This paper took the Baishuihe landslide in the Three Gorges reservoir area as the research object.Based on the block segmentation of the landslide,the monitoring data of the Baishuihe landslide block were organized,6-degree of freedom pose of block B was calculated,and the Kalman filtering data assimilation method was used to predict the landslide block movement.The research results showed that the proposed prediction method of the landslide movement state has good prediction accuracy and meets the expected goal.This paper provides a new research method and thinking angle to study the motion state of landslide block.展开更多
Phasor Measurement Units(PMUs)provide Global Positioning System(GPS)time-stamped synchronized measurements of voltage and current with the phase angle of the system at certain points along with the grid system.Those s...Phasor Measurement Units(PMUs)provide Global Positioning System(GPS)time-stamped synchronized measurements of voltage and current with the phase angle of the system at certain points along with the grid system.Those synchronized data measurements are extracted in the form of amplitude and phase from various locations of the power grid to monitor and control the power system condition.A PMU device is a crucial part of the power equipment in terms of the cost and operative point of view.However,such ongoing development and improvement to PMUs’principal work are essential to the network operators to enhance the grid quality and the operating expenses.This paper introduces a proposed method that led to lowcost and less complex techniques to optimize the performance of PMU using Second-Order Kalman Filter.It is based on the Asyncrhophasor technique resulting in a phase error minimization when receiving the signal from an access point or from the main access point.The MATLAB model has been created to implement the proposed method in the presence of Gaussian and non-Gaussian.The results have shown the proposed method which is Second-Order Kalman Filter outperforms the existing model.The results were tested usingMean Square Error(MSE).The proposed Second-Order Kalman Filter method has been replaced with a synchronization unit into thePMUstructure to clarify the significance of the proposed new PMU.展开更多
A new method of unscented extended Kalman filter (UEKF) for nonlinear system is presented. This new method is a combination of the unscented transformation and the extended Kalman filter (EKF). The extended Kalman...A new method of unscented extended Kalman filter (UEKF) for nonlinear system is presented. This new method is a combination of the unscented transformation and the extended Kalman filter (EKF). The extended Kalman filter is similar to that in a conventional EKF. However, in every running step of the EKF the unscented transformation is running, the deterministic sample is caught by unscented transformation, then posterior mean of non- lineadty is caught by propagating, but the posterior covariance of nonlinearity is caught by linearizing. The accuracy of new method is a little better than that of the unscented Kalman filter (UKF), however, the computational time of the UEKF is much less than that of the UKF.展开更多
基金supported by China Postdoctoral Science Foundation(2023M741882)the National Natural Science Foundation of China(62103222,62273195)。
文摘In this study, the problem of measuring noise pollution distribution by the intertial-based integrated navigation system is effectively suppressed. Based on nonlinear inertial navigation error modeling, a nested dual Kalman filter framework structure is developed. It consists of unscented Kalman filter (UKF)master filter and Kalman filter slave filter. This method uses nonlinear UKF for integrated navigation state estimation. At the same time, the exact noise measurement covariance is estimated by the Kalman filter dependency filter. The algorithm based on dual adaptive UKF (Dual-AUKF) has high accuracy and robustness, especially in the case of measurement information interference. Finally, vehicle-mounted and ship-mounted integrated navigation tests are conducted. Compared with traditional UKF and the Sage-Husa adaptive UKF (SH-AUKF), this method has comparable filtering accuracy and better filtering stability. The effectiveness of the proposed algorithm is verified.
文摘Intelligent traffic control requires accurate estimation of the road states and incorporation of adaptive or dynamically adjusted intelligent algorithms for making the decision.In this article,these issues are handled by proposing a novel framework for traffic control using vehicular communications and Internet of Things data.The framework integrates Kalman filtering and Q-learning.Unlike smoothing Kalman filtering,our data fusion Kalman filter incorporates a process-aware model which makes it superior in terms of the prediction error.Unlike traditional Q-learning,our Q-learning algorithm enables adaptive state quantization by changing the threshold of separating low traffic from high traffic on the road according to the maximum number of vehicles in the junction roads.For evaluation,the model has been simulated on a single intersection consisting of four roads:east,west,north,and south.A comparison of the developed adaptive quantized Q-learning(AQQL)framework with state-of-the-art and greedy approaches shows the superiority of AQQL with an improvement percentage in terms of the released number of vehicles of AQQL is 5%over the greedy approach and 340%over the state-of-the-art approach.Hence,AQQL provides an effective traffic control that can be applied in today’s intelligent traffic system.
基金supported by the Science and Technology Research Project of Henan Province (No.222102210087)the Science and Technology Research Project of Henan Province (No.222102220102).
文摘The aging prediction of railway catenary is of profound significance for ensuring the regular operation of electrified trains.However,in real-world scenarios,accurate predictions are challenging due to various interferences.This paper addresses this challenge by proposing a novel method for predicting the aging of railway catenary based on an improved Kalman filter(KF).The proposed method focuses on modifying the priori state estimate covariance and measurement error covariance of the KF to enhance accuracy in complex environments.By comparing the optimal displacement value with the theoretically calculated value based on the thermal expansion effect of metals,it becomes possible to ascertain the aging status of the catenary.To improve prediction accuracy,a railway catenary aging prediction model is constructed by integrating the Takagi-Sugeno(T-S)fuzzy neural network(FNN)and KF.In this model,an adaptive training method is introduced,allowing the FNN to use fewer fuzzy rules.The inputs of the model include time,temperature,and historical displacement,while the output is the predicted displacement.Furthermore,the KF is enhanced by modifying its prior state estimate covariance and measurement error covariance.These modifications contribute to more accurate predictions.Lastly,a low-power experimental platform based on FPGA is implemented to verify the effectiveness of the proposed method.The test results demonstrate that the proposed method outperforms the compared method,showcasing its superior performance.
基金funded by the project scheme of the Publication Writing-IPR Incentive Program(PPHKI)2022Directorate of Research and Community Service(DRPM)Institut Teknologi Sepuluh Nopember(ITS)Surabaya,Indonesia for the financial supports。
文摘For the last two decades,low-cost Global Navigation Satellite System(GNSS)receivers have been used in various applications.These receivers are mini-size,less expensive than geodetic-grade receivers,and in high demand.Irrespective of these outstanding features,low-cost GNSS receivers are potentially poorer hardwares with internal signal processing,resulting in lower quality.They typically come with low-cost GNSS antenna that has lower performance than their counterparts,particularly for multipath mitigation.Therefore,this research evaluated the low-cost GNSS device performance using a high-rate kinematic survey.For this purpose,these receivers were assembled with an Inertial Measurement Unit(IMU)sensor,which actively transmited data on acceleration and orientation rate during the observation.The position and navigation parameter data were obtained from the IMU readings,even without GNSS signals via the U-blox F9R GNSS/IMU device mounted on a vehicle.This research was conducted in an area with demanding conditions,such as an open sky area,an urban environment,and a shopping mall basement,to examine the device’s performance.The data were processed by two approaches:the Single Point Positioning-IMU(SPP/IMU)and the Differential GNSS-IMU(DGNSS/IMU).The Unscented Kalman Filter(UKF)was selected as a filtering algorithm due to its excellent performance in handling nonlinear system models.The result showed that integrating GNSS/IMU in SPP processing mode could increase the accuracy in eastward and northward components up to 68.28%and 66.64%.Integration of DGNSS/IMU increased the accuracy in eastward and northward components to 93.02%and 93.03%compared to the positioning of standalone GNSS.In addition,the positioning accuracy can be improved by reducing the IMU noise using low-pass and high-pass filters.This application could still not gain the expected position accuracy under signal outage conditions.
基金The project is supported by the National Natural Science Foundation of China(52067013)the Key Projects of the Natural Science Foundation of Gansu Provincial Science and Technology Department(22JR5RA318).
文摘In light of the prevailing issue that the existing convolutional neural network(CNN)power quality disturbance identification method can only extract single-scale features,which leads to a lack of feature information and weak anti-noise performance,a new approach for identifying power quality disturbances based on an adaptive Kalman filter(KF)and multi-scale channel attention(MS-CAM)fused convolutional neural network is suggested.Single and composite-disruption signals are generated through simulation.The adaptive maximum likelihood Kalman filter is employed for noise reduction in the initial disturbance signal,and subsequent integration of multi-scale features into the conventional CNN architecture is conducted.The multi-scale features of the signal are captured by convolution kernels of different sizes so that the model can obtain diverse feature expressions.The attention mechanism(ATT)is introduced to adaptively allocate the extracted features,and the features are fused and selected to obtain the new main features.The Softmax classifier is employed for the classification of power quality disturbances.Finally,by comparing the recognition accuracy of the convolutional neural network(CNN),the model using the attention mechanism,the bidirectional long-term and short-term memory network(MS-Bi-LSTM),and the multi-scale convolutional neural network(MSCNN)with the attention mechanism with the proposed method.The simulation results demonstrate that the proposed method is higher than CNN,MS-Bi-LSTM,and MSCNN,and the overall recognition rate exceeds 99%,and the proposed method has significant classification accuracy and robust classification performance.This achievement provides a new perspective for further exploration in the field of power quality disturbance classification.
基金supported by National Natural Science Foundation of China (Nos.62265010,62061024)Gansu Province Science and Technology Plan (No.23YFGA0062)Gansu Province Innovation Fund (No.2022A-215)。
文摘A wireless sensor network mobile target tracking algorithm(ISO-EKF)based on improved snake optimization algorithm(ISO)is proposed to address the difficulty of estimating initial values when using extended Kalman filtering to solve the state of nonlinear mobile target tracking.First,the steps of extended Kalman filtering(EKF)are introduced.Second,the ISO is used to adjust the parameters of the EKF in real time to adapt to the current motion state of the mobile target.Finally,the effectiveness of the algorithm is demonstrated through filtering and tracking using the constant velocity circular motion model(CM).Under the specified conditions,the position and velocity mean square error curves are compared among the snake optimizer(SO)-EKF algorithm,EKF algorithm,and the proposed algorithm.The comparison shows that the proposed algorithm reduces the root mean square error of position by 52%and 41%compared to the SOEKF algorithm and EKF algorithm,respectively.
基金supported by the Ministry of Science and Technology,Taiwan(Grant Number MOST 110-2221-E-019-042).
文摘The goal of this work is to provide an understanding of estimation technology for both linear and nonlinear dynamical systems.A critical analysis of both the Kalman filter(KF)and the extended Kalman filter(EKF)will be provided,along with examples to illustrate some important issues related to filtering convergence due to system modeling.A conceptual explanation of the topic with illustrative examples provided in the paper can help the readers capture the essential principles and avoid making mistakes while implementing the algorithms.Adding fictitious process noise to the system model assumed by the filter designers for convergence assurance is being investigated.A comparison of estimation accuracy with linear and nonlinear measurements is made.Parameter identification by the state estimation method through the augmentation of the state vector is also discussed.The intended readers of this article may include researchers,working engineers,or engineering students.This article can serve as a better understanding of the topic as well as a further connection to probability,stochastic process,and system theory.The lesson learned enables the readers to interpret the theory and algorithms appropriately and precisely implement the computer codes that nicely match the estimation algorithms related to the mathematical equations.This is especially helpful for those readers with less experience or background in optimal estimation theory,as it provides a solid foundation for further study on the theory and applications of the topic.
基金supported by the National Natural Science Foundation of China(62033010)Aeronautical Science Foundation of China(2019460T5001)。
文摘It is quite often that the theoretic model used in the Kalman filtering may not be sufficiently accurate for practical applications,due to the fact that the covariances of noises are not exactly known.Our previous work reveals that in such scenario the filter calculated mean square errors(FMSE)and the true mean square errors(TMSE)become inconsistent,while FMSE and TMSE are consistent in the Kalman filter with accurate models.This can lead to low credibility of state estimation regardless of using Kalman filters or adaptive Kalman filters.Obviously,it is important to study the inconsistency issue since it is vital to understand the quantitative influence induced by the inaccurate models.Aiming at this,the concept of credibility is adopted to discuss the inconsistency problem in this paper.In order to formulate the degree of the credibility,a trust factor is constructed based on the FMSE and the TMSE.However,the trust factor can not be directly computed since the TMSE cannot be found for practical applications.Based on the definition of trust factor,the estimation of the trust factor is successfully modified to online estimation of the TMSE.More importantly,a necessary and sufficient condition is found,which turns out to be the basis for better design of Kalman filters with high performance.Accordingly,beyond trust factor estimation with Sage-Husa technique(TFE-SHT),three novel trust factor estimation methods,which are directly numerical solving method(TFE-DNS),the particle swarm optimization method(PSO)and expectation maximization-particle swarm optimization method(EM-PSO)are proposed.The analysis and simulation results both show that the proposed TFE-DNS is better than the TFE-SHT for the case of single unknown noise covariance.Meanwhile,the proposed EMPSO performs completely better than the EM and PSO on the estimation of the credibility degree and state when both noise covariances should be estimated online.
基金supported by the MSIT(Ministry of Science and ICT),Korea,under the ICAN(ICT Challenge and Advanced Network of HRD)program(IITP-2023-RS-2022-00156326)supervised by the IITP(Institute of Information&Communications Technology Planning&Evaluation).
文摘Unmanned aerial vehicles(UAVs)can be used to monitor traffic in a variety of settings,including security,traffic surveillance,and traffic control.Numerous academics have been drawn to this topic because of the challenges and the large variety of applications.This paper proposes a new and efficient vehicle detection and tracking system that is based on road extraction and identifying objects on it.It is inspired by existing detection systems that comprise stationary data collectors such as induction loops and stationary cameras that have a limited field of view and are not mobile.The goal of this study is to develop a method that first extracts the region of interest(ROI),then finds and tracks the items of interest.The suggested system is divided into six stages.The photos from the obtained dataset are appropriately georeferenced to their actual locations in the first phase,after which they are all co-registered.The ROI,or road and its objects,are retrieved using the GrabCut method in the second phase.The third phase entails data preparation.The segmented images’noise is eliminated using Gaussian blur,after which the images are changed to grayscale and forwarded to the following stage for additional morphological procedures.The YOLOv3 algorithm is used in the fourth step to find any automobiles in the photos.Following that,the Kalman filter and centroid tracking are used to perform the tracking of the detected cars.The Lucas-Kanade method is then used to perform the trajectory analysis on the vehicles.The suggested model is put to the test and assessed using the Vehicle Aerial Imaging from Drone(VAID)dataset.For detection and tracking,the model was able to attain accuracy levels of 96.7%and 91.6%,respectively.
基金supported in part by the Shandong Natural Science Foundation under Grant ZR2020MF067.
文摘To provide stable and accurate position information of control points in a complex coastal environment,an adaptive iterated extended Kalman filter(AIEKF)for fixed-point positioning integrating global navigation satellite system,inertial navigation system,and ultra wide band(UWB)is proposed.In thismethod,the switched global navigation satellite system(GNSS)and UWB measurement are used as the measurement of the proposed filter.For the data fusion filter,the expectation-maximization(EM)based IEKF is used as the forward filter,then,the Rauch-Tung-Striebel smoother for IEKF filter’s result smoothing.Tests illustrate that the proposed AIEKF is able to provide an accurate estimation.
基金National R&D Project for Smart Construction Technology (RS-2020-KA156887) funded by the Korea Agency for Infrastructure Technology Advancement under the Ministry of Land, InfrastructureTransport and managed by the Korea Expressway Corporation and National Research Foundation of Korea (NRF) Grant (NRF-2021R1A6A3A13046053)the Chung-Ang University Research grants in 2022。
文摘Computer vision(CV)-based techniques have been widely used in the field of structural health monitoring(SHM)owing to ease of installation and cost-effectiveness for displacement measurement.This paper introduces computer vision based method for robust displacement measurement under occlusion by incorporating random sample consensus(RANSAC).The proposed method uses the Kanade-Lucas-Tomasi(KLT)tracker to extract feature points for tracking,and these feature points are filtered through RANSAC to remove points that are noisy or occluded.With the filtered feature points,the proposed method incorporates Kalman filter to estimate acceleration from velocity and displacement extracted by the KLT.For validation,numerical simulation and experimental validation are conducted.In the simulation,performance of the proposed RANSAC filtering was validated to extract correct displacement out of group of displacements that includes dummy displacement with noise or bias.In the experiment,both RANSAC filtering and acceleration measurement were validated by partially occluding the target for tracking attached on the structure.The results demonstrated that the proposed method successfully measures displacement and estimates acceleration as compared to a reference displacement sensor and accelerometer,even under occluded conditions.
文摘It is necessary to know the status of adhesion conditions between wheel and rail for efficient accelerating and decelerating of railroad vehicle.The proper estimation of adhesion conditions and their real-time implementation is considered a challenge for scholars.In this paper,the development of simulation model of extended Kalman filter(EKF)in MATLAB/Simulink is presented to estimate various railway wheelset parameters in different contact conditions of track.Due to concurrent in nature,the Xilinx®System-on-Chip Zynq Field Programmable Gate Array(FPGA)device is chosen to check the onboard estimation ofwheel-rail interaction parameters by using the National Instruments(NI)myRIO®development board.The NImyRIO®development board is flexible to deal with nonlinearities,uncertain changes,and fastchanging dynamics in real-time occurring in wheel-rail contact conditions during vehicle operation.The simulated dataset of the railway nonlinear wheelsetmodel is tested on FPGA-based EKF with different track conditions and with accelerating and decelerating operations of the vehicle.The proposed model-based estimation of railway wheelset parameters is synthesized on FPGA and its simulation is carried out for functional verification on FPGA.The obtained simulation results are aligned with the simulation results obtained through MATLAB.To the best of our knowledge,this is the first time study that presents the implementation of a model-based estimation of railway wheelset parameters on FPGA and its functional verification.The functional behavior of the FPGA-based estimator shows that these results are the addition of current knowledge in the field of the railway.
基金supported by Development Project in Key Technical Field of Sichuan Province(2019ZDZX0030)International Science and Technology Innovation Cooperation Program of Sichuan Province(2021YFH0115)+1 种基金Nanchong-SWPU Science and Technology Strategic Cooperation Project(SXHZ057)Key and Core Technology Breakthrough Project of CNPC(2021ZG08).
文摘The stability of the subsea oil and gas production system is heavily influenced by slug flow. One successful method of managing slug flow is to use top valve control based on subsea pipeline pressure. However, the complexity of production makes it difficult to measure the pressure of subsea pipelines, and measured values are not always accessible in real-time. The research introduces a technique for integrating Unscented Kalman Filter (UKF) and Wavelet Neural Network (WNN) to estimate the state of subsea pipeline pressure using historical data and a state model. The proposed method treats multiphase flow transport as a nonlinear model, with a dynamic WNN serving as the state observer. To achieve real-time state estimation, the WNN is included into the UKF algorithm to create a WNN-based UKF state equation. Integrate WNN and UKF in a novel way to predict system state accurately. The simulated results show that the approach can efficiently predict the inlet pressure and manage the slug flow in real-time using the riser's top pressure, outlet flow and valve opening. This method of estimate can significantly increase the control effect.
文摘In this paper,a Millimeter wave(mmWave)beam tracking problem is studied in orthogonal time frequency space(OTFS)systems.Considering the nonlinearity of beamforming and the constraints of existing Kalman-filtering based beam tracking schemes,we propose a novel Cubature Kalman Filter(CKF)framework tracking the channel state information(CSI)to manage the challenge of highspeed channel variation in single-user moving scene for OTFS systems.Aiming for low complexity for mobile settings,this paper trains only one beam pair to track a path to maintain the reliable communication link in the analog beamforming architecture.Simulation results show that our proposed method has better tracking performance to improve the accuracy of the estimated beam angle compared with prior work.
基金Supported by National Natural Science Foundation of China(Grant Nos.51905329,51975118)Foundation of State Key Laboratory of Automotive Simulation and Control of China(Grant No.20181112).
文摘Distributed drive electric vehicles(DDEVs)possess great advantages in the viewpoint of fuel consumption,environment protection and traffic mobility.Whereas the effects of inertial parameter variation in DDEV control system become much more pronounced due to the drastic reduction of vehicle weights and body size,and inertial parameter has seldom been tackled and systematically estimated.This paper presents a dual central difference Kalman filter(DCDKF)where two Kalman filters run in parallel to simultaneously estimate vehicle different dynamic states and inertial parameters,such as vehicle sideslip angle,vehicle mass,vehicle yaw moment of inertia,the distance from the front axle to centre of gravity.The proposed estimation method only integrates and utilizes real-time measurements of hub torque information and other in-vehicle sensors from standard DDEVs.The four-wheel nonlinear vehicle dynamics estimation model considering payload variations,Pacejka tire model,wheel and motor dynamics model is developed,the observability of the DCDKF observer is analysed and derived via Lie derivative and differential geometry theory.To address system nonlinearities in vehicle dynamics estimation,the DCDKF and dual extended Kalman filter(DEKF)are also investigated and compared.Simulation with various maneuvers are carried out to verify the effectiveness of the proposed method using Matlab/Simulink-CarsimR.The results show that the proposed DCDKF method can effectively estimate vehicle dynamic states and inertial parameters despite the existence of payload variations and variable driving conditions.This research provides a boot-strapping procedure which can performs optimal estimation to estimate simultaneously vehicle system state and inertial parameter with high accuracy and real-time ability.
基金Supported by Program for Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region(No.NJYT23060).
文摘To accurately predict traffic flow on the highways,this paper proposes a Convolutional Neural Network-Bi-directional Long Short-Term Memory-Attention Mechanism(CNN-BiLSTM-Attention)traffic flow prediction model based on Kalman-filtered data processing.Firstly,the original fluctuating data is processed by Kalman filtering,which can reduce the instability of short-term traffic flow prediction due to unexpected accidents.Then the local spatial features of the traffic data during different periods are extracted,dimensionality is reduced through a one-dimensional CNN,and the BiLSTM network is used to analyze the time series information.Finally,the Attention Mechanism assigns feature weights and performs Soft-max regression.The experimental results show that the data processed by Kalman filter is more accurate in predicting the results on the CNN-BiLSTM-Attention model.Compared with the CNN-BiLSTM model,the Root Mean Square Error(RMSE)of the Kal-CNN-BiLSTM-Attention model is reduced by 17.58 and Mean Absolute Error(MAE)by 12.38,and the accuracy of the improved model is almost free from non-working days.To further verify the model’s applicability,the experiments were re-run using two other sets of fluctuating data,and the experimental results again demonstrated the stability of the model.Therefore,the Kal-CNN-BiLSTM-Attention traffic flow prediction model proposed in this paper is more applicable to a broader range of data and has higher accuracy.
基金supported by the National Natural Science Foundation of China (Nos. 11890712 and 12061141008)the National Key R&D Program of China (Nos. 2018YFE0104700 and 2018YFE0205200)+1 种基金supported in part by the Offices of NP and HEP within the U.S. DOE Office of ScienceYue-Hang Leung was partially supported by the GSI-Heidelberg cooperation contract。
文摘We applied KF Particle, a Kalman Filter package for secondary vertex finding and fitting, to strange and open charm hadron reconstruction in heavy-ion collisions in the STAR experiment. Compared to the conventional helix swimming method used in STAR, the KF Particle method considerably improved the reconstructed Λ, Ω, and D~0 significance. In addition, the Monte Carlo simulation with STAR detector responses could adequately reproduce the topological variable distributions reconstructed in real data using the KF Particle method, thereby retaining substantial control of the reconstruction efficiency uncertainties for strange and open charm hadron measurements in heavy-ion collisions.
基金supported by National Natural Science Foundation of China(Grant Nos.42090054,52027814 and 41772376)the Open Fund of the Technology Innovation Center for Automated Geological Disaster Monitoring,Ministry of Natural Resources(Grant No.2022058014)。
文摘Compared with the study of single point motion of landslides,studying landslide block movement based on data from multiple monitoring points is of great significance for improving the accurate identification of landslide deformation.Based on the study of landslide block,this paper regarded the landslide block as a rigid body in particle swarm optimization algorithm.The monitoring data were organized to achieve the optimal state of landslide block,and the 6-degree of freedom pose of the landslide block was calculated after the regularization.Based on the characteristics of data from multiple monitoring points of landslide blocks,a prediction equation for the motion state of landslide blocks was established.By using Kalman filtering data assimilation method,the parameters of prediction equation for landslide block motion state were adjusted to achieve the optimal prediction.This paper took the Baishuihe landslide in the Three Gorges reservoir area as the research object.Based on the block segmentation of the landslide,the monitoring data of the Baishuihe landslide block were organized,6-degree of freedom pose of block B was calculated,and the Kalman filtering data assimilation method was used to predict the landslide block movement.The research results showed that the proposed prediction method of the landslide movement state has good prediction accuracy and meets the expected goal.This paper provides a new research method and thinking angle to study the motion state of landslide block.
文摘Phasor Measurement Units(PMUs)provide Global Positioning System(GPS)time-stamped synchronized measurements of voltage and current with the phase angle of the system at certain points along with the grid system.Those synchronized data measurements are extracted in the form of amplitude and phase from various locations of the power grid to monitor and control the power system condition.A PMU device is a crucial part of the power equipment in terms of the cost and operative point of view.However,such ongoing development and improvement to PMUs’principal work are essential to the network operators to enhance the grid quality and the operating expenses.This paper introduces a proposed method that led to lowcost and less complex techniques to optimize the performance of PMU using Second-Order Kalman Filter.It is based on the Asyncrhophasor technique resulting in a phase error minimization when receiving the signal from an access point or from the main access point.The MATLAB model has been created to implement the proposed method in the presence of Gaussian and non-Gaussian.The results have shown the proposed method which is Second-Order Kalman Filter outperforms the existing model.The results were tested usingMean Square Error(MSE).The proposed Second-Order Kalman Filter method has been replaced with a synchronization unit into thePMUstructure to clarify the significance of the proposed new PMU.
文摘A new method of unscented extended Kalman filter (UEKF) for nonlinear system is presented. This new method is a combination of the unscented transformation and the extended Kalman filter (EKF). The extended Kalman filter is similar to that in a conventional EKF. However, in every running step of the EKF the unscented transformation is running, the deterministic sample is caught by unscented transformation, then posterior mean of non- lineadty is caught by propagating, but the posterior covariance of nonlinearity is caught by linearizing. The accuracy of new method is a little better than that of the unscented Kalman filter (UKF), however, the computational time of the UEKF is much less than that of the UKF.