To study the characteristics of attenuation, hydrostatic towage and wave response of the vertical-axis floating tidal current energy power generation device （VAFTCEPGD）, a prototype is designed and experiment is car...To study the characteristics of attenuation, hydrostatic towage and wave response of the vertical-axis floating tidal current energy power generation device （VAFTCEPGD）, a prototype is designed and experiment is carried out in the towing tank. Free decay is conducted to obtain attenuation characteristics of the VAFTCEPGD, and characteristics of mooring forces and motion response, floating condition, especially the lateral displacement of the VAFTCEPGD are obtained from the towing in still water. Tension response of the #1 mooring line and vibration characteristics of the VAFTCEPGD in regular waves as well as in level 4 irregular wave sea state with the current velocity of 0.6 m/s. The results can be reference for theoretical study and engineering applications related to VAFTCEPGD.展开更多
The energy of a radio wave is reduced through the dispersion, the refraction and the absorption because the medium transferring the vibration of a radio wave is the seawater. In the end the reduced energy of a radio w...The energy of a radio wave is reduced through the dispersion, the refraction and the absorption because the medium transferring the vibration of a radio wave is the seawater. In the end the reduced energy of a radio wave causes the reduced transmitting length for communication, the long postponed communication and the frequent error. The subsea communication for the marine environment monitoring which must overcome the weak points of the RF wave and the most practical method for the marine sensor network realization is to use the acoustic wave method, but the energy consumption rate of the acoustic wave communication method is about 100 times greater than the one of the RF wave method. So, the power supply of the sensor node in the marine sensor network system is the most important interest field. In this study, the sample which consists of an acrylic elastomer(VHB4905 film from 3M), conductible carbon grease(from MG chemical) and electric wire for the basic study of an energy harvesting strategy and technique using EAP actuator was fabricated, and the conductible carbon grease was used for an electrode. The characteristics of the fabricated sample were analyzed through the experiment. We also mixed carbon grease with aluminum powder for conductibility improvement, and the effect of the mixed electrode was confirmed through the conductivity measurement.展开更多
In the hostile and highly corrosive marine environment,advanced composite materials can be used in marine current turbines due to their high strength-to-weight ratios and excellent resistance to corrosion.A composite ...In the hostile and highly corrosive marine environment,advanced composite materials can be used in marine current turbines due to their high strength-to-weight ratios and excellent resistance to corrosion.A composite material marine current turbine(CMMCT),which has significant advantages over traditional designs,has been developed and investigated numerically.A substantial improvement in turbine performance is achieved by placement of a duct to concentrate the energy.Computational fluid dynamics(CFD) results show that the extracted power of a ducted CMMCT can be three to four times the power extracted by a bare turbine of the same turbine area.The results provide an insight into the hydrodynamic design and operation of a CMMCT used to shorten the design period and improve technical performance.展开更多
随着陆地资源日益枯竭,海洋成为人类生存和发展的广阔空间。针对海洋的研究不断扩大,海洋观测仪器日益增多,决定海上仪器工作时间的关键就是其内部电源的供电能力。在国家海洋能专项资金课题支持下,设计了一种利用海洋潮流能发电的2.5 ...随着陆地资源日益枯竭,海洋成为人类生存和发展的广阔空间。针对海洋的研究不断扩大,海洋观测仪器日益增多,决定海上仪器工作时间的关键就是其内部电源的供电能力。在国家海洋能专项资金课题支持下,设计了一种利用海洋潮流能发电的2.5 k W拖曳式水平轴潮流能发电装置,为大型海洋浮标装置提供可靠的水下电能补充,通过拖动试验及海上试验表明该装置启动流速低、可靠性高。展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.51309068,51309069,51579055 and 11572094)the Special Funded of Innovational Talents of Science and Technology in Harbin(Grant No.RC2014QN001008)+1 种基金the China Postdoctoral Science Foundation(Grant Nos.2014M561334 and 2015T80330)the Heilongjiang Postdoctoral Science Foundation(Grant No.LBH-Z14060)
文摘To study the characteristics of attenuation, hydrostatic towage and wave response of the vertical-axis floating tidal current energy power generation device （VAFTCEPGD）, a prototype is designed and experiment is carried out in the towing tank. Free decay is conducted to obtain attenuation characteristics of the VAFTCEPGD, and characteristics of mooring forces and motion response, floating condition, especially the lateral displacement of the VAFTCEPGD are obtained from the towing in still water. Tension response of the #1 mooring line and vibration characteristics of the VAFTCEPGD in regular waves as well as in level 4 irregular wave sea state with the current velocity of 0.6 m/s. The results can be reference for theoretical study and engineering applications related to VAFTCEPGD.
文摘The energy of a radio wave is reduced through the dispersion, the refraction and the absorption because the medium transferring the vibration of a radio wave is the seawater. In the end the reduced energy of a radio wave causes the reduced transmitting length for communication, the long postponed communication and the frequent error. The subsea communication for the marine environment monitoring which must overcome the weak points of the RF wave and the most practical method for the marine sensor network realization is to use the acoustic wave method, but the energy consumption rate of the acoustic wave communication method is about 100 times greater than the one of the RF wave method. So, the power supply of the sensor node in the marine sensor network system is the most important interest field. In this study, the sample which consists of an acrylic elastomer(VHB4905 film from 3M), conductible carbon grease(from MG chemical) and electric wire for the basic study of an energy harvesting strategy and technique using EAP actuator was fabricated, and the conductible carbon grease was used for an electrode. The characteristics of the fabricated sample were analyzed through the experiment. We also mixed carbon grease with aluminum powder for conductibility improvement, and the effect of the mixed electrode was confirmed through the conductivity measurement.
文摘In the hostile and highly corrosive marine environment,advanced composite materials can be used in marine current turbines due to their high strength-to-weight ratios and excellent resistance to corrosion.A composite material marine current turbine(CMMCT),which has significant advantages over traditional designs,has been developed and investigated numerically.A substantial improvement in turbine performance is achieved by placement of a duct to concentrate the energy.Computational fluid dynamics(CFD) results show that the extracted power of a ducted CMMCT can be three to four times the power extracted by a bare turbine of the same turbine area.The results provide an insight into the hydrodynamic design and operation of a CMMCT used to shorten the design period and improve technical performance.
文摘随着陆地资源日益枯竭,海洋成为人类生存和发展的广阔空间。针对海洋的研究不断扩大,海洋观测仪器日益增多,决定海上仪器工作时间的关键就是其内部电源的供电能力。在国家海洋能专项资金课题支持下,设计了一种利用海洋潮流能发电的2.5 k W拖曳式水平轴潮流能发电装置,为大型海洋浮标装置提供可靠的水下电能补充,通过拖动试验及海上试验表明该装置启动流速低、可靠性高。
