On electro-acoustic characteristics of a marine broadband sparker for seismic exploration

The construction of major marine infrastructure projects and the exploration and development of deep-sea mineral resources require fine imaging of seabed strata and structures.The highresolution marine seismic exploration based on a high broadband sparker source is an important approach to reveal seabed stratum and reservoir structure,and identify geohazard.To optimize the performance of sparker seismic source,we investigated the electro-acoustic characteristics of spark discharge under conditions of different charging voltages and electrode numbers.Results show that the sound source level increased with the increase of the charging voltage,whereas the main frequency decreased when the charging voltage increases.In addition,it was found that the charging capacitance had more obvious influence on the main frequency than the sound source level did.Although the load energy decreased with increasing electrode number,the sound source level still increased but the main frequency decreased.Meanwhile,the primary to bubble(P/B)ratio increased with the increase of the electrode number.To gain a deeper insight into the electro-acoustic characteristics,we investigate the relationship between sound source level and power peak,from which a good correlation was observed.A more practical statistical analysis on the rise rate of current was processed,and a perfect logarithmic function was derived.Furthermore,we found that the main frequency was most possibly subjected to the electrical energy,especially the charging energy per electrode.The results indicate that the charging energy per electrode less than 10 J could increase the main frequency to above 300 Hz.At last,the main frequency could be reduced to 20 Hz when the charging energy of a single-electrode discharge was enhanced to over 4 kJ.This study shall be helpful in developing a sparker seismic source and improving the performance for marine engineering exploration and geohazard assessment.

Modeling air gun signatures in marine seismic exploration considering multiple physical factors

Based on analyzing the limit of Ziolkowski＇s bubble oscillation formulation,a new model with various physical factors is established to simulate air gun signatures fo marine seismic exploration.The practical effects of physical factors,such as heat transfe across the bubble wall,air gun port throttling,vertical rise of the bubble,fluid viscosity,and the existence of the air gun body were all taken into account in the new model.Compared with Ziolkowski＇s model,the signatures simulated by the new model,with small peak amplitude and rapid decay of bubble oscillation,are more consistent with actual signatures The experiment analysis indicates：（1）gun port throttling controls the peak amplitude of ai gun pulse;（2）since the hydrostatic pressure decreases when the bubble rises,the bubble oscillation period changes;（3）heat transfer and fluid viscosity are the main factors tha explain the bubble oscillation damping.

Marine Engineering Geological Exploration Information System(MEGEIS):A GIS-based Application to Marine Resources Exploitation

Based on the ArcGIS geographic information system and the ORACLE database management system,this paper reports our studies on the technology of Marine Engineering Geological Exploration Information System(MEGEIS). By analyzing system structure,designing function modules and discussing data management,this paper systematically proposes a framework of technol-ogy to integrate,manage,and analyze the seabed information comprehensively. Then,the technology is applied to the design and development of the Bohai Sea Oilfield Paradigm Area Information System. The system can not only meet the practical demands of marine resources exploration and exploitation in the Bohai Sea oilfield,but also serve as a preparatory work in theory and technology for the realization of the 'Digital Seabed'.

Assessment of natural gas hydrate reservoirs at Site GMGS3-W19 in the Shenhu area,South China Sea based on various well logs

To obtain the characteristics of the gas hydrate reservoirs at GMGS3-W19,extensive geophysical logging data and cores were analyzed to assess the reservoir properties.Sediment porosities were estimated from density,neutron,and nuclear magnetic resonance(NMR)logs.Both the resistivity and NMR logs were used to calculate gas hydrate saturations,the Simandoux model was employed to eliminate the effects of high clay content determined based on the ECS and core data.The density porosity was closely in agreement with the core-derived porosity,and the neutron porosity was higher while the NMR porosity was lower than the density porosity of sediments without hydrates.The resistivity log has higher vertical resolution than the NMR log and thus is more favorable for assessing gas hydrate saturation with strong heterogeneity.For the gas hydrate reservoirs at GMGS3-W19,the porosity,gas hydrate saturation and free gas saturation was 52.7%,42.7%and 10%,on average,respectively.The various logs provide different methods for the comprehensive evaluation of hydrate reservoir,which supports the selection of candidate site for gas hydrate production testing.

A Decentralized Parallel One-Pass Fixed-Interval Deconvolution Algorithm for Multisensor Systems with Multiplicative Noises

A decentralized parallel one-pass deconvolution algorithm for multisensor systems with multiplicative noises is proposed. Comparing with the conventional deconvolution algorithm, it avoids the computational overload and the high storage requirement. The algorithm is optimal in the sense of linear minimum-variance. The simulation results illustrate the validity of the proposed algorithm.