Optimal design theories of tuned mass dampers with nonlinear viscous damping

Optimal design theory for linear tuned mass dampers （TMD） has been thoroughly investigated, but is still under development for nonlinear TMDs. In this paper, optimization procedures in the time domain are proposed for design of a TMD with nonlinear viscous damping. A dynamic analysis of a structure implemented with a nonlinear TMD is conducted first. Optimum design parameters for the nonlinear TMD are searched using an optimization method to minimize the performance index. The feasibility of the proposed optimization method is illustrated numerically by using the Taipei 101 structure implemented with TMD. The sensitivity analysis shows that the performance index is less sensitive to the damping coefficient than to the frequency ratio. Time history analysis is conducted using the Taipei 101 structure implemented with different TMDs under wind excitation. For both linear and nonlinear TMDs, the comfort requirements for building occupants are satisfied as long as the TMD is properly designed. It was found that as the damping exponent increases, the relative displacement of the TMD decreases but the damping force increases.

APPLICABILITY OF THE MASS ACTION LAW IN COMBINATION WITH THE COEXISTENCE THEORY OF METALLIC MELTS INVOLVING COMPOUND TO BINARY METALLIC MELTS

Based on the atomicity and molecularity as well as the consistency ofthermodynamic properties and activities of metallic melts with their structures, the coexistencetheory of metallic melts structure involving compound has been suggested. According to this theory,the calculating models of mass action concentrations for different binary metallic melts have beenformulated. The calculated mass action concentrations agree well with corresponding measuredactivities, which confirms that the suggested theory can reflect the structural characteristics ofmetallic melts involving compound and that the mass action law is widely applicable to this kind ofmetallic melts.

Mass Transfer Modeling in Pervaporation Based on Multi-fields Synergy Theory

Toprovide a theoretical basis for optimizing the pervaporation procedure, a mass transfer model for pervaporation for binary mixtures was developed basedon the multi-fields synergy theory. This model used the mechanism of sorption-diffusion-desorption and introduced a diffusion coefficient, which was dependent on the feed concentration and temperature. Regarding the strong coupling effect in the mass transfer, the concentration distribution in membrane was predicted using the Flory-Huggins thermodynamic theory. The batch experiments and other experiments with constant composition-were conducted-using a modified chitosan pervaporatioffmembrane to separate tert-butyl alcohol （TBA）-water mixtures. The parameters of the mass transfer model were obtained from the flux of the experiments with a constant composition and the activity coefficients available through phase equilibrium equation, using the Willson equation in the feed side and the Flory-Huggins thermodynamic theory within the membrane The simulation results of the experiments .are in good agreement with the results, of the experiments.

Nuclear Fusion Research and Development Need New Relativistic Mass and Energy Corrections Given by the Information Relativity Theory

Hundred years after the conjecture of the British astronomer Eddington that the sun is powered by nuclear fusion of hydrogen, new physics theory may help make energy harvesting by nuclear fusion soon a reality. Researchers as well as investors funding fusion megaprojects are asked to deal with new relativistic corrections for mass and energy proposed by Suleiman in his Information Relativity Theory (IRT). These corrections were calculated in this contribution. It will help to decide whether a venture will be successful and to save big investments when in doubt. The assumed optimal kinetic energy for controlled nuclear fusion must be corrected to a somewhat higher level. At very high kinetic energy in the upper GeV range, it remains not enough baryonic mass to be transformed in energy. The fusion probability faded out to zero already at the golden limit of the recession speed of between target nucleon and projectile nucleon. Cold nuclear fusion, if ever possible, is recommended for protons rather than deuterons at highest experimental possible temperatures around 1000 (K) and needs fine-tuned kinetic nucleon energy. It would be also of interest whether a golden ratio based nuclear fuel confinement chamber could be beneficial. In this connection, also cold nuclear fusion setups should be discussed. Nature is governed by the golden ratio and criticality of physical systems influenced by it, and nuclear physics is not an exception. Computer simulations of the underlying controlled nuclear fusion processes should gain profit from IRT corrected starting information and may tackle anew possible low energy nuclear transmutations considering the wave-like dark components of matter and energy.

Effective-mass theory for coupled quantum dots grown on （11N）-oriented substrates

The electronic structures of coupled quantum dots grown on （11N）-oriented substrates are studied in the framework of effective-mass envelope-function theory. The results show that the all-hole subbands have the smallest widths and the optical properties are best for the （113）, （114）, and （115） growth directions. Our theoretical results agree with the available experimental data. Our calculated results are useful for the application of coupled quantum dots in photoelectric devices.

Valence band structure and density of states effective mass model of biaxial tensile strained silicon based on k·p theory

After constructing a stress and strain model, the valence bands of in-plane biaxial tensile strained Si is calculated by k·p method. In the paper we calculate the accurate anisotropy valance bands and the splitting energy between light and heavy hole bands. The results show that the valance bands are highly distorted, and the anisotropy is more obvious. To obtain the density of states （DOS） effective mass, which is a very important parameter for device modeling, a DOS effective mass model of biaxial tensile strained Si is constructed based on the valance band calculation. This model can be directly used in the device model of metal-oxide semiconductor field effect transistor （MOSFET）. It also a provides valuable reference for biaxial tensile strained silicon MOSFET design.

Classical Theory of Advance of Perihelion of Mercury with Velocity Dependent Inertial and Gravitational Masses

It is shown that Mercury's motion of the perihelion around the Sun, which is believed to be explicable quantitatively only by general relativity, can be fully understood within the frame of the dynamics of special relativity. It is only necessary to take into consideration the relativistic dependence of the planet's inertial and gravitational masses on its velocity (relative to the Sun) in the conservation equations for energy, and linear and angular momenta in the gravitational field. The physical Problem is reduced to a singular, nonlinear differential equation, which is solved numerically for the planet Mercury. The advance of the perihelion of Mercury is shown to be = 42.087' for a period of 100 years, which is in agreement with the as- tronomical observations and the result (by analytical approximations) of general relativity.

A Back Look on the Binary Phase Diagrams of Metals from the Mass Action Law and the Coexistence Theory of Metallic Melts

According to the mass action law and the coexistence theory of metallic melts, the mass action concentrations of Cu-Mg, Bi-Tl and Ni-Al melts involving compound formation have been calculated. The calculated results show that, except the ultimate case of pure element, when two elements are present in the melts, all structural units (atoms and molecules) without exception will be present in the melts, i.e., their concentrations may change from great to small, but they will not vanish into nothing, and only under such conditions, the calculated results both agree with practice and obey the law of mass action. In view of that over considerable wide composition range, the activities of both elements of the three solid binary alloys mentioned above have been measured, this seems in contradiction with the present relevant phase diagrams, in which the structural units are determined by composition range, so the latter needs further investigation and consideration.

A Unifying Theory of Dark Energy, Dark Matter, and Baryonic Matter in the Positive-Negative Mass Universe Pair: Protogalaxy and Galaxy Evolutions

This paper modifies the Farnes’ unifying theory of dark energy and dark matter which are negative-mass, created continuously from the negative-mass universe in the positive-negative mass universe pair. The first modification explains that observed dark energy is 68.6%, greater than 50% for the symmetrical positive-negative mass universe pair. This paper starts with the proposed positive-negative-mass 11D universe pair (without kinetic energy) which is transformed into the positive-negative mass 10D universe pair and the external dual gravities as in the Randall-Sundrum model, resulting in the four equal and separate universes consisting of the positive-mass 10D universe, the positive-mass massive external gravity, the negative-mass 10D universe and the negative-mass massive external gravity. The positive-mass 10D universe is transformed into 4D universe (home universe) with kinetic energy through the inflation and the Big Bang to create positive-mass dark matter which is five times of positive-mass baryonic matter. The other three universes without kinetic energy oscillate between 10D and 10D through 4D, resulting in the hidden universes when D > 4 and dark energy when D = 4, which is created continuously to our 4D home universe with the maximum dark energy = 3/4 = 75%. In the second modification to explain dark matter in the CMB, dark matter initially is not repulsive. The condensed baryonic gas at the critical surface density induces dark matter repulsive force to transform dark matter in the region into repulsive dark matter repulsing one another. The calculated percentages of dark energy, dark matter, and baryonic matter are 68.6 (as an input from the observation), 26 and 5.2, respectively, in agreement with observed 68.6, 26.5 and 4.9, respectively, and dark energy started in 4.33 billion years ago in agreement with the observed 4.71 ± 0.98 billion years ago. In conclusion, the modified Farnes’ unifying theory reinterprets the Farnes’ equations, and is a unifying theory of dark energy, dark matter, and baryonic matter in the positive-negative mass universe pair. The unifying theory explains protogalaxy and galaxy evolutions in agreement with the observations.

Product family modeling technology for customized cosmetic packaging design based on basic-element theory

Background:As the market demands change,SMEs(small and medium-sized enterprises)have long faced many design issues,including high costs,lengthy cycles,and insufficient innovation.These issues are especially noticeable in the domain of cosmetic packaging design.Objective:To explore innovative product family modeling methods and configuration design processes to improve the efficiency of enterprise cosmetic packaging design and develop the design for mass customization.Methods:To accomplish this objective,the basic-element theory has been introduced and applied to the design and development system of the product family.Results:By examining the mapping relationships between the demand domain,functional domain,technology domain,and structure domain,four interrelated models have been developed,including the demand model,functional model,technology model,and structure model.Together,these models form the mechanism and methodology of product family modeling,specifically for cosmetic packaging design.Through an analysis of a case study on men’s cosmetic packaging design,the feasibility of the proposed product family modeling technology has been demonstrated in terms of customized cosmetic packaging design,and the design efficiency has been enhanced.Conclusion:The product family modeling technology employs a formalized element as a module configuration design language,permeating throughout the entire development cycle of cosmetic packaging design,thus facilitating a structured and modularized configuration design process for the product family system.The application of the basic-element principle in product family modeling technology contributes to the enrichment of the research field surrounding cosmetic packaging product family configuration design,while also providing valuable methods and references for enterprises aiming to elevate the efficiency of cosmetic packaging design for the mass customization product model.

Retrospective and prospective review of the generalized nonlinear strength theory for geomaterials

Strength theory is the basic theory for calculating and designing the strength of engineering materials in civil,hydraulic,mechanical,aerospace,military,and other engineering disciplines.Therefore,the comprehensive study of the generalized nonlinear strength theory(GNST)of geomaterials has significance for the construction of engineering rock strength.This paper reviews the GNST of geomaterials to demonstrate the research status of nonlinear strength characteristics of geomaterials under complex stress paths.First,it systematically summarizes the research progress of GNST(classical and empirical criteria).Then,the latest research the authors conducted over the past five years on the GNST is introduced,and a generalized three-dimensional(3D)nonlinear Hoek‒Brown(HB)criterion(NGHB criterion)is proposed for practical applications.This criterion can be degenerated into the existing three modified HB criteria and has a better prediction performance.The strength prediction errors for six rocks and two in-situ rock masses are 2.0724%-3.5091%and 1.0144%-3.2321%,respectively.Finally,the development and outlook of the GNST are expounded,and a new topic about the building strength index of rock mass and determining the strength of in-situ engineering rock mass is proposed.The summarization of the GNST provides theoretical traceability and optimization for constructing in-situ engineering rock mass strength.

Novelties Filtration Theory of Liquid Chromatography-Mass Spectrometry in Volume Nanotube of Cotton Filament of Layers Woven Fabrics

Objectives of the research to present a modern theory of water purification for multiple purposes entitled “a novelties filtration theory of liquid chromatography-mass spectrometry” is an exceedingly sensitive and specific analytical technique in volume layers woven fabrics that can precisely determine the identities and quantities of compounds within volume Nanotube of cotton filament of layers woven fabrics. The problems are that the filters in the local and international markets have increased complications in configuration, installation and cost without reaching the efficiency that humanity hopes. Throw materials and methods the chromatography-mass spectrometry in layers woven fabrics, and throw the nanotube of cotton filament for purification of water dyes and smells. Industry, in which mass spectrometry is a convenient, versatile method for characterization and identification of process throw the Nanotube of cotton filament for purification of water dyes and smells. Results came up with a theme “innovations in textiles”, and also, for characterization of fibers and contaminants of the fabrics. Additive manufacturing in layers woven fabrics, are the processes used to synthesize a volume object under computer control with successive material layers that have been used and highlighted. The conclusions has included chromatography-mass spectrometry drop, physico-chemical, biological, combined physical-biological and chemical-biological treatment processes recently being developed to meet Jet-filtration, the strict discharging limits set by ASTM standards. Some important aspects of both qualitative and quantitative data analysis have been described and the power of using mass profiles to enhance selectivity and sensitivity has been demonstrated.

Solving the Olbers’s Paradox, Explaining the “Red-Shift”, and Challenging the Relativities by “Sun Matters Theory” and “Sun Model of Universe”, an Evolution of the Einstein’s Static Universe Model

Olbers’s paradox, known as the dark night paradox, is an argument in astrophysics that the darkness of the night sky conflicts with the assumption of an infinite and eternal static universe. Big-Bang theory was used to partially explain this paradox, while introducing new problems. Hereby, we propose a better theory, named Sun Matters Theory, to explain this paradox. Moreover, this unique theory supports and extended the Einstein’s static universe model proposed by Albert Einstein in 1917. Further, we proposed our new universe model, “Sun Model of Universe”. Based on the new model and novel theory, we generated innovative field equation by upgrading Einstein’s Field Equation through adding back the cosmological constant, introducing a new variable and modifying the gravitationally-related concepts. According to the Sun Model of Universe, the dark matter and dark energy comprise the so-called “Sun Matters”. The observed phenomenon like the red shift is explained as due to the interaction of ordinary light with Sun Matters leading to its energy and frequency decrease. In Sun Model, our big universe consists of many universes with ordinary matter at the core mixed and surrounded with the Sun Matters. In those universes, the laws of physics may be completely or partially different from that of our ordinary universe with parallel civilizations. The darkness of night can be easily explained as resulting from the interaction of light with the Sun Matters leading to the sharp decrease in the light intensity. Sun Matters also scatter the light from a star, which makes it shining as observed by Hubble. Further, there is a kind of Sun Matters named “Sun Waters”, surrounding every starts. When lights pass by the sun, the Sun Waters deflect the lights to bend the light path. According to the Sun Model, it is the light bent not the space bent that was proposed in the theory of relativities.

On the Vacuum Hydrodynamics of Moving Bodies—The Theory of General Singularity

The Theory of General Singularity is presented, unifying quantum field theory, general relativity, and the standard model. This theory posits phonons as fundamental excitations in a quantum vacuum, modeled as a Bose-Einstein condensate. Through key equations, the role of phonons as intermediaries between matter, energy, and spacetime geometry is demonstrated. The theory expands Einsteins field equations to differentiate between visible and dark matter, and revises the standard model by incorporating phonons. It addresses dark matter, dark energy, gravity, and phase transitions, while making testable predictions. The theory proposes that singularities, the essence of particles and black holes, are quantum entities ubiquitous in nature, constituting the very essence of elementary particles, seen as micro black holes or quantum fractal structures of spacetime. As the theory is refined with increasing mathematical rigor, it builds upon the foundation of initial physical intuition, connecting the spacetime continuum of general relativity with the hydrodynamics of the quantum vacuum. Inspired by the insights of Tesla and Majorana, who believed that physical intuition justifies the infringement of mathematical rigor in the early stages of theory development, this work aims to advance the understanding of the fundamental laws of the universe and the perception of reality.

An analysis of the interaction mechanism between the social history of medicine research and health communication from the perspective of mass communication

The mass communication model and interactive ritual chain theory,which serve as communication paradigms in the new media era,facilitate and enhance the synergy between the fields of social history of medicine and health communication.This study employs a comprehensive framework based on the five elements of the mass communication model:information source,communication subject,communication object,message content,and post-communication feedback.Additionally,it incorporates the interactive ritual chain theory to examine the evolving dynamics and developmental trajectory of research in the social history of medicine during the new media era.Conclusively,this paper acknowledges the existing interaction gaps in the interaction between health communication and the social history of medicine research while outlining the challenges for fostering collaboration and proposing strategic optimizations for effective integration.

Damage failure of cemented backfill and its reasonable match with rock mass

In order to study the failure mechanism of backfill and the reasonable matches between backfill and rock mass, and to achieve the object of safe and efficient mining in metal mine, four types of backfills were tested under uniaxial compression loading, with cement?tailing ratios of 0.250:1, 0.125:1, 0.100:1 and 0.083:1, respectively. With the help of the stress?strain curves, the deformation and failure characteristics of different backfills with differing cement?tailing ratios were analyzed. Based on the experimental results, the damage constitutive equations of cemented backfills with four cement?tailing ratios were proposed on the basis of damage mechanics. Moreover, comparative analysis of constitutive model and experimental results were made to verify the reliability of the damage model. In addition, an energy model using catastrophe theory to obtain the instability criteria of system was established to study the interaction between backfill and rock mass, and then the system instability criterion was deduced. The results show that there are different damage characteristics for different backfills, backfills with lower cement?tailing ratio tend to have a lower damage value when stress reaches peak value, and damage more rapidly and more obviously in failure process after peak value of stress; the stiffness and elastic modulus of rock mass with lower strength are more likely to lead to system instability. The results of this work provide a scientific basis for the rational strength design of backfill mine.

A universal thermodynamic model of calculating mass action concentrations for structural units or ion couples in aqueous solutions and its applications in binary and ternary aqueous solutions

A universal thermodynamic model of calculating mass action concentrations for structural units or ion couples in ternary and binary strong electrolyte aqueous solution was developed based on the ion and molecule coexistence theory and verified in four kinds of binary aqueous solutions and two kinds of ternary aqueous solutions. The calculated mass action concentrations of structural units or ion couples in four binary aqueous solutions and two ternary solutions at 298.15 K have good agreement with the reported activity data from literatures after shifting the standard state and concentration unit. Therefore, the calculated mass action concentrations of structural units or ion couples from the developed universal thermodynamic model for ternary and binary aqueous solutions can be applied to predict reaction ability of components in ternary and binary strong electrolyte aqueous solutions. It is also proved that the assumptions applied in the developed thermodynamic model are correct and reasonable, i.e., strong electrolyte aqueous solution is composed of cations and anions as simple ions, H2O as simple molecule and other hydrous salt compounds as complex molecules. The calculated mass action concentrations of structural units or ion couples in ternary and binary strong electrolyte aqueous solutions strictly follow the mass action law.

基于统计证据的Mass函数和D-S证据理论的多传感器目标识别

mass函数表示对证据的精确信任程度,是信任函数的基本概率分配。文章在阐述Dempster-Shafer(D-S)证据理论和决策方法的基础上,较系统地论述了基于统计证据的mass函数和D-S证据理论的目标识别的数据融合方法,并给出了具体的识别实例。从计算结果可以看出,该方法有利于目标识别的实现,具有较好的实用性。

基于目标多特征的mass函数确定方法

针对D-S证据理论在目标识别中mass函数难以获取的问题,提出一种基于目标多特征的mass函数确定方法。该方法首先利用模糊理论中的隶属函数确定目标的特征隶属度矩阵,然后根据特征隶属度矩阵计算mass函数确定过程中各特征的可信度,最后把各特征的隶属度值和可信度转换成mass函数。仿真结果表明,该方法获取的mass函数具有很好的可靠性和抗干扰性。

基于熵的Mass函数算法及在液压泵故障诊断中的应用

如何确定Mass函数是D-S证据理论的棘手问题,本文从信息论的观点出发,提出一种新的计算Mass函数的算法。该算法依据证据体可信度因素和证据体与目标关联的相对熵来分配证据体的Mass函数,较全面反映证据体的不确定性。将方法应用于液压泵诊断中,结果表明它获取的Mass函数是符合实际情况的,具有较好的实用性,而且其算法容易实现。