Mass-transport Deposits of the Upper Cretaceous Qingshankou Formation, Songliao Terrestrial Basin, Northeast China: Depositional Characteristics, Recognition Criteria and External Geometry

Extensive mass transport deposits（MTDs）, which form a significant component of the stratigraphic record in ancient and modern deep water systems, mostly distributed in the continental margin of ocean basins worldwide. To date, no large-scale MTDs have been found in Chinese terrestrial basins. Based on integrated analysis of the seismic, drilling, core and logging data, this article report MTDs have been found in Songliao terrestrial basin（SLTB）, Northeast China. During the depositional period of the Upper Cretaceous Qingshankou Formation, slope break of lacustrine basins was an ideal discharge place for gravity depositions. Regional sedimentary study of MTDs reveals that Cretaceous-age MTDs in SLTB were deposited in slope-break environments by slide, slump and debris flow, and MTDs were mixed with little turbidite simultaneously. Besides the massive aspect, key features of MTDs are the common presence of deformational structures or softsedimentary deformation, floating shale clasts, boudins, microfaults, distortion beddings, rotated sand debris. Detailed mapping of two three-dimensional（3-D） seismic surveys acquired in Yingtai（YT） and Haituozi（HTZ） areas reveals that MTDs are characterized by chaotic, mounded, and transparent seismic reflection. Growth fault, slope gully and geomorphology of the slope break greatly influenced the sedimentary process and external geometry of MTDs, and as a consequence, MTDs in SLTB exhibit classic fan-like geometry and some special（non-fan-like） external geometry. Furthermore, fanlike MTDs can be divided into three subcategories, including isolated fan, mother-son fan and stacked fan. Non-fan-like MTDs can be divided into two subcategories, strip-like MTDs and faulted-pit MTDs. A new sedimentary model has been built for MTDs in SLTB. MTDs have become a new exploration and development target in the SLTB.

Tumor deposits in axillary adipose tissue in patients with breast cancer:Do they matter?

Tumor deposits(TDs)are defined as discrete,irregular clusters of tumor cells lying in the soft tissue adjacent to but separate from the primary tumor,and are usually found in the lymphatic drainage area of the primary tumor.By definition,no residual lymph node structure should be identified in these tumor masses.At present,TDs are mainly reported in colorectal cancer,with a few reports in gastric cancer.There are very few reports on breast cancer(BC).For TDs,current dominant theories suggest that these are the result of lymph node metastasis of the tumor with complete destruction of the lymph nodes by the tumor tissue.Even some pathologists classify a TD as two lymph node metastases for calculation.Some pathologists also believe that TDs belong to the category of disseminated metastasis.Therefore,regardless of the origin,TDs are an indicator of poor prognosis.Moreover,for BC,sentinel lymph node biopsy is generally used at present.Whether radical axillary lymph node dissection should be adopted for BC with TDs in axillary lymph nodes is still inconclusive.The present commentary of this clinical issue has certain guiding significance.It is aimed to increase the awareness of the scientific community towards this under-recognized problem in BC pathology.

Depositional process of hyperpycnal flow deposits:A case study on Lower Cretaceous Sangyuan outcrop in the Luanping Basin,Northeast China

Sedimentary process research is of great significance for understanding the distribution and characteristics of sediments.Through the detailed observation and measurement of the Sangyuan outcrop in Luanping Basin,this paper studies the depositional process of the hyperpycnal flow deposits,and divides their depositional process into three phases,namely,acceleration,erosion and deceleration.In the acceleration phase,hyperpycnal flow begins to enter the basin nearby,and then speeds up gradually.Deposits developed in the acceleration phase are reverse.In addition,the original deposits become unstable and are taken away by hyperpycnal flows under the eroding force.As a result,there are a lot of mixture of red mud pebbles outside the basin and gray mud pebbles within the basin.In the erosion phase,the reverse deposits are eroded and become thinner or even disappear.Therefore,no reverse grading characteristic is found in the proximal major channel that is closer to the source,but it is still preserved in the middle branch channel that is far from the source.After entering the deceleration phase,normally grading deposits appear and cover previous deposits.The final deposits in the basin are special.Some are reverse,and others are normal.They are superimposed with each other under the action of hyperpycnal flow.The analysis of the Sangyuan outcrop demonstrates the sedimentary process and distribution of hyperpycnites,and reasonably explain the sedimentary characteristics of hyperpycnites.It is helpful to the prediction of oil and gas exploration targets in gravity flow deposits.

Effects of soil crust on the collapsing erosion of colluvial deposits with granite residual soil

Collapsing erosion is a unique phenomenon commonly observed on the granite residue hillslopes in the tropical and subtropical regions of southern China,characterized by its abrupt occurrence and significant erosion volumes.However,the impacts of soil crust conditions on the erosion of colluvial deposits with granite residual soils have only been studied to a limited extent.To address this issue,this study investigates the impacts of three soil crust conditions(i.e.,without crust,10-minute crust,and 20-minute crust)on gully morphology,rainfall infiltration,and runoff and sediment yield during slope erosion of colluvial deposits with granite residues(classified as Acrisols)in Yudu County,Ganzhou City,Jiangxi Province,China,using simulated rainfall tests and photographic methods.The results showed that as the strength of the soil crust increased,the capacity of moisture infiltration and the width and depth of the gully as well as the sediment concentration and yield ratio decreased;at the same time,the runoff ratio increased.The sediment yield in the without-crust test was found to be 1.24 and 1.43 times higher than that observed in the 10-minute crust and 20-minute crust tests,respectively.These results indicate that soil crusts can effectively prevent slope erosion and moisture infiltration,while providing valuable insights for the management of soil erosion in natural environments.

A Novel Three-stage Tectonic Model for Mississippi Valleytype Zn-Pb Deposits in Orogenic Fold-and-Thrust Belts

Mississippi Valley-type(MVT) Zn-Pb deposits predominantly form within both orogenic forelands and fold-andthrust belts, yet the mineralization process within the latter tectonic setting remains inadequately understood. This study, through a comprehensive review of MVT deposits across global fold-and-thrust belts, introduces a novel model elucidating the mineralization process in the context of tectonic belt evolution. It is demonstrated that during the stage Ⅰ, regional compression is introduced by early stages of plate convergence, causing the folding and thrusting and creating structural or lithological traps such as evaporite diapirs and unconformity-related carbonate dissolution-collapse structures. Thereafter, in stage Ⅱ, hydrocarbons begin to migrate and accumulate within these traps, where reduced sulfur is generated through thermochemical or bacterial sulfate reduction concurrent with or preceding Zn-Pb mineralization. In the subsequent stage Ⅲ, as plate convergence persists, the regional stress transitions from compression to transpression or extension. Under these conditions, steeply-dipping extensional faults are generated, facilitating the ascent of metalliferous brines into early-formed structural or lithological traps. Precipitation of Zn and Pb sulfides occurs through the mixing of Zn-Pb-transporting fluids with pre-existing reduced sulfur or by interaction with hydrocarbons.

Storm Liquefaction Deposits:A Possibility of Time Reversal in Sedimentary Strata of an Estuarial Coastal Area

In the sedimentary strata dating of estuarial coastal areas,it is often found that there is phenomenon of time-reversal in strata.The seabed sediments could be liquefied under storm waves.A laboratory wave flume experiment demonstrated that storm-induced liquefaction deposits are formed by the oscillations of liquefied sediments.In this paper,the particle size distribution and ^(210)Pb_(ex) specific activity of the sediment samples from the liquefaction disturbed zone and adjacent stable zone of the Yellow River Delta were tested.The stratigraphic divisions based on storm liquefaction deposit sequence can effectively explain the vertical changes in particle size and ^(210)Pb_(ex) specific activity.Due to the differentiation of particles during the storm induced liquefaction,coarse and fine particles regrouped,which could explain the phenomenon of time-reversal in dating data.

Classification and mineralization of global lithium deposits and lithium extraction technologies for exogenetic lithium deposits

A reasonable classification of deposits holds great significance for identifying prospecting targets and deploying exploration. The world ’s keen demand for lithium resources has expedited the discovery of numerous novel lithium resources. Given the presence of varied classification criteria for lithium resources presently, this study further ascertained and classified the lithium resources according to their occurrence modes, obtaining 10 types and 5 subtypes of lithium deposits(resources) based on endogenetic and exogenetic factors. As indicated by surveys of Cenozoic exogenetic lithium deposits in China and abroad,the formation and distribution of the deposits are primarily determined by plate collision zones, their primary material sources are linked to the anatectic magmas in the deep oceanic crust, and they were formed primarily during the Miocene and Late Paleogene. The researchers ascertained that these deposits,especially those of the salt lake, geothermal, and volcanic deposit types, are formed by unique slightly acidic magmas, tend to migrate and accumulate toward low-lying areas, and display supernormal enrichment. However, the material sources of lithium deposits(resources) of the Neopaleozoic clay subtype and the deep brine type are yet to be further identified. Given the various types and complex origins of lithium deposits(resources), which were formed due to the interactions of multiple spheres, it is recommended that the mineralization of exogenetic lithium deposits(resources) be investigated by integrating tectono-geochemistry, paleoatmospheric circulation, and salinology. So far, industrialized lithium extraction is primarily achieved in lithium deposits of the salt lake, clay, and hard rock types. The lithium extraction employs different processes, with lithium extraction from salt lake-type lithium deposits proving the most energy-saving and cost-effective.

Development and validation of a nomogram for preoperative prediction of tumor deposits in colorectal cancer

BACKGROUND Based on the clinical data of colorectal cancer(CRC)patients who underwent surgery at our institution,a model for predicting the formation of tumor deposits(TDs)in this patient population was established.AIM To establish an effective model for predicting TD formation,thus enabling clinicians to identify CRC patients at high risk for TDs and implement personalized treatment strategies.METHODS CRC patients(n=645)who met the inclusion criteria were randomly divided into training(n=452)and validation(n=193)cohorts using a 7:3 ratio in this retrospective analysis.Least absolute shrinkage and selection operator regression was employed to screen potential risk factors,and multivariable logistic regression analysis was used to identify independent risk factors.Subsequently,a predictive model for TD formation in CRC patients was constructed based on the independent risk factors.The discrimination ability of the model,its consistency with actual results,and its clinical applicability were evaluated using receiveroperating characteristic curves,area under the curve(AUC),calibration curves,and decision curve analysis(DCA).RESULTS Thirty-four(7.5%)patients with TDs were identified in the training cohort based on postoperative pathological specimens.Multivariate logistic regression analysis identified female sex,preoperative intestinal obstruction,left-sided CRC,and lymph node metastasis as independent risk factors for TD formation.The AUCs of the nomogram models constructed using these variables were 0.839 and 0.853 in the training and validation cohorts,respectively.The calibration curve demonstrated good consistency,and the training cohort DCA yielded a threshold probability of 7%-78%.CONCLUSION This study developed and validated a nomogram with good predictive performance for identifying TDs in CRC patients.Our predictive model can assist surgeons in making optimal treatment decisions.

Risk factors predict microscopic extranodal tumor deposits in advanced stage Ⅲ colon cancer patients

BACKGROUND Colorectal cancer is a frequent cause of cancer-related mortality in patients with lymph node or distant metastases.Pericolonic tumor deposits(TDs)are considered prognostically distinct from lymph node metastases.AIM To investigate risk factors for extranodal TDs in stage III colon cancer.METHODS This was a retrospective cohort study.We selected 155 individuals diagnosed with stage III colon cancer from the database of the Cancer Registry of the Tri-Service General Hospital.The patients were allocated into the groups with/without N1c.Multivariate Cox regression analysis and Kaplan-Meier method were done.The primary outcomes investigate the association between the covariates and extranodal TDs,and prognostic significance of the covariates regarding the survival.RESULTS There were 136 individuals in the non-N1c group and 19 individuals in the N1c group.Patients with lymphovascular invasion(LVI)had a higher risk of TDs.Overall survival rates of patients with and without LVI were 6.64 years and 8.61 years,respectively(P=0.027).The N1c patients without LVI had higher overall survival than those who with LVI(7.73 years vs 4.42 years,P=0.010).CONCLUSION Patients having stage III colon cancer with LVI have a higher probability of having TDs than those with stage III colon cancer without LVI.Stage III colon cancer patients with TDs and LVI could have poor prognosis and outcome.

Volcanism Pacing Slumping Gravity Flow Deposits during the Late Carboniferous in the Southern Margin of the Junggar Basin,China

Deep-water gravity depositional processes and evolution in arc systems have become topics of intense research focus in recent years.This study discusses the co-evolution of volcanism and deep-water gravity flow deposits at the southern margin of the Junggar Basin,based on petrology,geochronology and geochemical analyses.The results show that a massive collapse of unstable sediments from the slope was triggered by volcanism,resulting in the formation of slumping gravity flows.The occurrence of volcanic beds in the slump deposits confirm that synchronous volcanism likely affected sediment instability,triggering gravity flows.The Th/Yb,Ta/Yb and Th/Ta elemental ratios,U-Pb ages of detrital zircons and paleocurrent directions indicate that the North Tianshan(NTS)island arc represents the provenance of the Qianxia Formation.Moreover,statistical data on the pyroclastic components in the gravity flow deposits reveal an intensity index of volcanism,indicating that volcanism is strongly related to gravity flow deposits,especially in terms of the type and distribution of the deposits.A model for volcanically-triggered deep-water gravity flow deposits is established,in order to provide a more in-depth understanding of the co-evolution of volcanism and gravity flow deposits within the depositional setting of the late Paleozoic NTS oceanic subduction margin in the Junggar Basin.

Incorporation of perigastric tumor deposits into the TNM staging system for primary gastric cancer

BACKGROUND The current prognostic significance of perigastric tumor deposits(TDs)in gastric cancer(GC)remains unclear.AIM To assess the prognostic value of perigastric TDs and put forward a new TNM staging framework involving TDs for primary GC.METHODS This study retrospectively analyzed the pathological data of 6672 patients with GC who underwent gastrectomy or surgery for GC with other diseases from January 1,2012 to December 31,2017 at the Chinese PLA General Hospital.According to the presence of perigastric TDs or not,the patients were divided into TD-positive and TD-negative groups by using the method of propensity score matching.The differences between TD-positive and TD-negative patients were analyzed using binary logistic regression modeling.The Kaplan-Meier method was used to plot survival curves.Multivariate Cox regression modeling and the log-rank test were used to analyze the data.RESULTS Perigastric TDs were found to be positive in 339(5.09%)of the 6672 patients with GC,among whom 237 were men(69.91%)and 102 were women(30.09%)(2.32:1).The median age was 59 years(range,27 to 78 years).Univariate and multivariate survival analyses indicated that TD-positive GC patients had a poorer prognosis than TD-negative patients(P<0.05).The 1-,3-,and 5-year overall survival rates of GC patients with TDs were 68.3%,19.6%,and 11.2%,respectively,and these were significantly poorer than those without TDs of the same stages.There was significant variation in survival according to TD locations among the GC patients(P<0.05).A new TNM staging framework for GC was formulated according to TD location.When TDs appear in the gastric body,the original stages T1,T2,and T3 are classified as T4a with the new framework,and the original stages T4a and T4b both are classified as T4b.When TDs appear in the lesser curvature,the previous stages N0,N1,N2,and N3 now both are classified as N3.When TDs appear in the greater curvature or the distant tissue,the patient should be categorized as having M1.With the new GC staging scheme including TDs,the survival curves of patients in the lower grade TNM stage with TDs were closer to those of patients in the higher grade TNM stage without TDs.CONCLUSION TDs are a poor prognostic factor for patients with primary GC.The location of TDs is associated with the prognosis of patients with primary GC.Accordingly,we developed a new TNM staging framework involving TDs that is more appropriate for patients with primary GC.

Types,characteristics and geological significance of event deposits of Chang 9 Member of Triassic Yanchang Formation in southwestern Ordos Basin,NW China

Through core observation,thin section identification,and logging and testing data analysis,the types and characteristics of event deposits in the ninth member of Yanchang Formation of Triassic(Chang 9 Member)in southwestern Ordos Basin,China,are examined.There are 4 types and 9 subtypes of event deposits,i.e.earthquake,gravity flow,volcanic and anoxic deposits,in the Chang 9 Member in the study area.Based on the analysis of the characteristics and distribution of such events deposits,it is proposed that the event deposits are generally symbiotic or associated,with intrinsic genetic relations and distribution laws.Five kinds of sedimentary microfacies with relatively developed event deposits are identified,and the genetic model of event deposits is discussed.Seismites are mainly developed in the lake transgression stage when the basin expands episodically,and commonly affected by liquefaction flow,gravity action and brittle shear deformation.Gravity flow,mainly distributed in the high water level period,sandwiched in the fine-grained sediments of prodelta or semi-deep lake,or creates banded or lobate slump turbidite fan.It is relatively developed above the seismites strata.The volcanic event deposits are only seen in the lower part of the Chang 9 Member,showing abrupt contact at the top and bottom,which reflects the volcanic activity at the same time.Anoxic deposits are mostly formed in the late stage of lake transgression to the highstand stage.Very thick organic-rich shales are developed in the highstand stage of Chang 9 Member,and the event deposits in the depositional period of these shales are conducive to potential reservoirs.

Petrogenesis and Physicochemical Conditions of Fertile Porphyry in Non-arc Porphyry Mineralization:A Case from Habo Porphyry Cu-Mo Deposits,SW China

The Habo deposit is a typical porphyry Cu-Mo deposit in the Ailaoshan–Red River metallogenic belt.Ore minerals in the Habo deposit typically occur as veins in the monzonite porphyry.Zircon U-Pb dating suggests that the monzonite porphyry formed at 35.07±0.38 Ma.The monzonite porphyry is characterized by high SiO_(2),Al_(2)O_(3),K_(2)O and Na_(2)O contents,with A/CNK ratios ranging from 0.97 to 1.02.All samples exhibit fractionated REE patterns,characterized by high(La/Yb)N ratios(9.4–13.6,average of 11.2).They show adakite-like geochemical features,high Sr concentrations(627–751 ppm,average of 700 ppm),low Y concentrations(15.13–16.86 ppm,average of 15.81 ppm)and high Sr/Y values(39.5–47.4,average of 44.3).These samples have high initial^(87)Sr/^(86)Sr ratios(0.7074–0.7076)and negativeεNd(t)values(-5.1 to-3.7),whereas the zirconεHf(t)values range from-2.2 to+0.4,suggesting that the monzonite porphyry was derived from the partial melting of a thickened juvenile lower crust.The oxygen fugacity,calculated on the basis of the chemical composition of the amphiboles,shows?NNO values ranging from+1.65 to+2.16(average of 1.94)and lg(fO_(2))ranging from-12.72 to-11.99(average of-12.25),indicating that the monzonite porphyry has high oxygen fugacity.Zircons have high Ce^(4+)/Ce^(3+)ratios(29.29–164.24,average of 84.92),with high?FMQ values ranging from+0.50 to+1.51(average of 0.87)and high lg(fO_(2))values ranging from-14.72 to-12.85(average of-14.07),which also indicates that the oxygen fugacity of the magma was high.The dissolved water content of the Habo monzonite porphyry is 9.5–11.5 wt%,according to the geochemical characteristics,zircon-saturation thermometry(692–794°C)and the mineral phases(amphibole,no plagioclase)in the deep magma chamber.Combined with previous studies,we propose that the high oxygen fugacity and high water content of magma played key roles in controlling the formation of the Habo and other Cu-Mo-Au deposits in the Ailaoshan–Red River metallogenic belt.

Mineralization of the Liwu large-scale stratiform copper deposits in Sichuan Province, China: Constraints from fluid inclusions

The Liwu stratiform copper deposit is located in the northwestern Jianglang dome,western China.Current studies mainly focus on the genetic type and mineralization of this deposit.Detailed fluid inclusion characteristics of metallogenic period quartz veins were studied to reveal the ore-forming fluid features.Laser Raman analysis indicates that the ore-forming fluids is a H_(2)O-NaCl-CH_(4)(-CO_(2))system.Fluid inclusions microthermometry shows a homogenization temperature of 181-375°C and a salinity of 5.26%-16.99%for the disseminated-banded Cu-Zn mineralization;but a homogenization temperature of 142-343°C and a salinity of 5.41%-21.19%for the massive-veined Cu-Zn mineralization.These features suggest a medium-high temperature and a medium salinity for the ore-forming fluids.H-O isotopic data indicates that the ore-forming fluids were mainly from the metamorphic and magmatic water,plus minor formation water.And sulfur isotopic data indicates that sulfur was mainly derived from the formation and magmatic rocks.Metallogenesis of the disseminated-banded mineralization was mainly correlated with fluid mixing and water-rock reaction;whereas that of the massive-veined mineralization was mainly correlated with fluid boiling.The genetic type of the deposit is a medium-high temperature hydrothermal deposit related to magmatism and controlled by shear zones.This study is beneficial to understand the stratiform copper deposit.

Jet formation and penetration performance of a double-layer charge liner with chemically-deposited tungsten as the inner liner

This paper proposes a type of double-layer charge liner fabricated using chemical vapor deposition(CVD)that has tungsten as its inner liner.The feasibility of this design was evaluated through penetration tests.Double-layer charge liners were fabricated by using CVD to deposit tungsten layers on the inner surfaces of pure T2 copper liners.The microstructures of the tungsten layers were analyzed using a scanning electron microscope(SEM).The feasibility analysis was carried out by pulsed X-rays,slug-retrieval test and static penetration tests.The shaped charge jet forming and penetration law of inner tungsten-coated double-layer liner were studied by numerical simulation method.The results showed that the double-layer liners could form well-shaped jets.The errors between the X-ray test results and the numerical results were within 11.07%.A slug-retrieval test was found that the retrieved slug was similar to a numerically simulated slug.Compared with the traditional pure copper shaped charge jet,the penetration depth of the double-layer shaped charge liner increased by 11.4% and>10.8% respectively.In summary,the test results are good,and the numerical simulation is in good agreement with the test,which verified the feasibility of using the CVD method to fabricate double-layer charge liners with a high-density and high-strength refractory metal as the inner liner.

Correlations between trace elements in pyrite and gold mineralization of gold deposits on the North China platform

By studying both the microscopic physical and chemical typomorphic characteristics of typical mineral pyrite samples associated with representative gold deposits on the north-central margin of the North China Platform,this paper seeks to identify macroscopic metallogenic mechanisms of gold deposits and to reveal the formation mechanism of lattice gold in pyrite.Typomorphic characteristics of pyrite reveal that pyrite grain size has a negative correlation with gold content.Cubic pyrite,as the dominant crystal form,contains more gold than pentagonal dodecahedral pyrite.Both pyrite crystal forms and chemical compositions indicate that the replacement style of gold deposit formed in a low saturability,low sulfur fugacity,and at temperatures either much higher or much lower than its best forming temperature;comparatively,that of the quartz vein style of gold deposit occurred under conditions with the best temperature,rich in sulfur,and with high sulfur fugacity.The Au/Ag ratios of the pyrites show that both the replacement and quartz vein styles of deposits are mesothermal and hypothermal,while the Co/Ni ratios of the pyrites indicate that the quartz vein style is of magmatic-hydrothermal origin.The X-ray diffraction intensity of pyrite rich in gold is lower than that of pyrite poor in gold at the quartz vein style.In general,with an increase in gold content in pyrite,the total sum intensityΣI decreases.The pyroelectricity coefficient has a negative correlation trend with the values of(Co+Ni+Se+Te)-As and(Co+Ni+Se+Te)/As.The pyrite pyroelectricity of the replacement style is N-type,indicating that it formed under low sulfur fugacity,while that of the quartz vein style is a mixture of P-N types,indicating that it formed under high sulfur fugacity.On the pyroelectricity-temperature diagram,pyrite of the replacement style is mainly distributed between 200 and 270°C,while that of the quartz vein style varies between 90–118 and274–386°C,demonstrating a multistage forming process.In contrast to previous researchers'conclusions,the authors confirm the existence of lattice gold in pyrites through the use of an electron paramagnetic resonance(EPR)test.Au in the form of Au~+,entering pyrite as an isomorph and producing electron–hole centers,makes the centers produce spin resonance absorption and results in EPR absorption peak II.The intensity of auriferous pyrite absorption peak II has certain direct positive correlations with pyrite gold content.The#I and#III absorption peaks of pyrites possibly result from the existence of Ni^(2+)and/or Cu^(2+).γ1,γ2,andγ3 are the strongest and most typical absorption peaks of the infrared spectra of the pyrites.Generally,with the increase in gold content in the pyrite samples,γ1,γ2,andγ3 tend to shift to higher wavenumbers,and the gold content in the pyrite samples has a positive correlation with their relative absorbance.

Failure mechanism of a large-scale composite deposits caused by the water level increases

The failure of slope caused by variations in water levels on both banks of reservoirs is common.Reservoir landslides greatly threaten the safety of reservoir area.Taking large-scale composite deposits located on the Lancang River in Southwest China as a study case,the origin of the deposits was analyzed based on the field investigation and a multi-material model was established in the physical model test.Combined with numerical simulation,the failure mechanism of the composite deposits during reservoir water level variations was studied.The results indicate that the deformation of the large-scale composite deposits is a staged sliding mode during the impoundment process.The first slip deformation is greatly affected by the buoyancy weight-reducing effect,and the permeability of soil and variation in the water level are the factors controlling slope deformation initiation.The high water sensitivity and low permeability of fine grained soil play an important role in the re-deformation of deposits slope.During the impoundment process,the deformation trend of the deposit slope is decreasing,and vertical consolidation of soil and increasing hydrostatic pressure on the slope surface are the main reasons for deformation attenuation.It is considered that the probability of large-scale sliding of the deposits during the impoundment period is low.But the damage caused by local bank collapse of the deposit slope still needs attention.The results of this paper will further improve our understanding of the failure mechanism of composite deposits caused by water level increases and provide guidance for the construction of hydropower stations.

Accelerated Sequential Deposition Reaction via Crystal Orientation Engineering for Low-Temperature,High-Efficiency Carbon-Electrode CsPbBr_(3) Solar Cells

Low-temperature,ambient processing of high-quality CsPbBr_(3)films is demanded for scalable production of efficient,low-cost carbon-electrode perovskite solar cells(PSCs).Herein,we demonstrate a crystal orientation engineering strategy of PbBr_(2)precursor film to accelerate its reaction with CsBr precursor during two-step sequential deposition of CsPbBr_(3)films.Such a novel strategy is proceeded by adding CsBr species into PbBr_(2)precursor,which can tailor the preferred crystal orientation of PbBr_(2)film from[020]into[031],with CsBr additive staying in the film as CsPb_(2)Br_(5)phase.Theoretical calculations show that the reaction energy barrier of(031)planes of PbBr_(2)with CsBr is lower about 2.28 eV than that of(O2O)planes.Therefore,CsPbBr_(3)films with full coverage,high purity,high crystallinity,micro-sized grains can be obtained at a low temperature of 150℃.Carbon-electrode PSCs with these desired CsPbBr_(3)films yield the record-high efficiency of 10.27%coupled with excellent operation stability.Meanwhile,the 1 cm^(2)area one with the superior efficiency of 8.00%as well as the flexible one with the champion efficiency of 8.27%and excellent mechanical bending characteristics are also achieved.

Review on laser directed energy deposited aluminum alloys

Lightweight aluminum(Al)alloys have been widely used in frontier fields like aerospace and automotive industries,which attracts great interest in additive manufacturing(AM)to process high-value Al parts.As a mainstream AM technique,laser-directed energy deposition(LDED)shows good scalability to meet the requirements for large-format component manufacturing and repair.However,LDED Al alloys are highly challenging due to their inherent poor printability(e.g.low laser absorption,high oxidation sensitivity and cracking tendency).To further promote the development of LDED high-performance Al alloys,this review offers a deep understanding of the challenges and strategies to improve printability in LDED Al alloys.The porosity,cracking,distortion,inclusions,element evaporation and resultant inferior mechanical properties(worse than laser powder bed fusion)are the key challenges in LDED Al alloys.Processing parameter optimizations,in-situ alloy design,reinforcing particle addition and field assistance are the efficient approaches to improving the printability and performance of LDED Al alloys.The underlying correlations between processes,alloy innovation,characteristic microstructures,and achievable performances in LDED Al alloys are discussed.The benchmark mechanical properties and primary strengthening mechanism of LDED Al alloys are summarized.This review aims to provide a critical and in-depth evaluation of current progress in LDED Al alloys.Future opportunities and perspectives in LDED high-performance Al alloys are also outlined.

A Glance on the Mineral Deposits and Stratigraphic Sequential Variations and Structures in Different Sections of Indus Basin (Pakistan): New Titanosaurian Sauropod Dinosaurs from the Latest Maastrichtian Vitakri Formation of Pakistan

Indus basin hosts many significant mineral deposits like gypsum and cement raw materials, gemstones, iron, coal, marble, dimension and construction stones, petroleum and water resources, world class pink salt and other many minerals in different regions which need further exploitation and development. The construction of new water dams in different regions are vital (for availability of cheap electricity), because of available barren and fertile lands and wastage of water as flood. Further the installation of more cement industries in different regions of Indus Basin especially in middle Indus (Sulaiman Range where gypsum, clays and limestones can be available via belt) can increase export to receive more foreign exchange and make local cement cheap for the sustainable development of Pakistan. 31 stratigraphic sequential sections at different sections of Indus basins are presented to know the variation and local stratigraphy. Further here three new titanosaur taxa are being described. Saraikimasoom is based on snout;Gspsaurus, (Maojandino), Nicksaurus and Khanazeem are based on cranial, vertebral and appendicular elements;Balochisaurus, Marisaurus, Pakisaurus, and 3 new genera and species Imrankhanhero zilefatmi, Qaikshaheen masoomniazi and Ikqaumishan smqureshi based on vertebral and appendicular elements;and Sulaimanisaurus and Khetranisaurus based on only caudal vertebrae. Although Pakistani Titanosaurians seem to be proliferated found from one horizon of Vitakri Formation just below the K-Pg boundary they have a wide range of diagnostic features and key elements among titanosaurs which can be used for comparison and phylogenetic analyses with broad updated character data set of titanosaurs.