Research and Realization of a Master-Slave Robotic System for Retinal Vascular Bypass Surgery

Retinal surgery continues to be one of the most technical demanding surgeries for its high manipulation accuracy requirement, small and constrained workspace, and delicate retinal tissue. Robotic systems have the potential to enhance and expand the capabilities of surgeons during retinal surgery. Thus, focusing on retinal vessel bypass surgery, a master-slave robot system is developed in this paper. This robotic system is designed based on characteristics of retinal vascular bypass surgery and analysis of the surgical workspace in eyeball. A novel end-effector of two degrees of freedom is designed and a novel remote center of motion mechanism is adopted in the robot structure.The kinematics and the mapping relationship are then established, the gravity compensation control strategy and the hand tremor elimination algorithm are applied to achieve the high motion accuracy. The experiments on an artificial eyeball and an in vitro porcine eye are conducted, verifying the feasibility of this system.

Master-slave robot force telepresence technology

In order to make the manipulators useful, some force feedback is required to enable the operator to sense the robot’s feelings. Without force feedback, many tasks will not be able to be carried out. For these reasons, a master slave system with different kinematics has been developed. The system permits us to vary the ratio of the position/attitude, to design a master manipulator without considering the kinematics of the slave manipulator, and so on. To overcome the difficulties, a master slave manipulator system with different kinematics is proposed. The master manipulator is force controlled via a force torque sensor in the handle. As to master slave manipulator system with two way force feedback is concerned, the force goes to the actuator from the operator, and come back to the operator from the actuator. The working situation is viewed by the stereo TV supervisory system. The force and vision telepresence are thus achieved. In order to ensure the maneuverability, direct drive DC motors and PWM servo units are adopted to improve the response speed. It can provide force response in a wide range. A lot of experiments were performed with the master slave manipulator system force telepresence to study the force response under restricted environment. By two force sensors, the force position bilateral force response system effectively decreases the affection of friction and inertia force, and increases the authenticity of bilateral force response. When the slave manipulator arm is encountered with soft object(sponge), in the experiments, the operator can clearly have the fine feeling as if he himself is contacted with the object.

Tremor suppression in master-slave robot remote welding system

Welding seam tracking precision was decreased due to human hand tremor during the master-slave welding teleoperation. To solve this problem, a master-slave robot remote welding system was built, the system consisted of a master manipulator with six degree of freedom （ DOF ） , an industrial computer control system and a slave Motoman HP3 J robot, and human hand tremor and digital filtering were discussed. An optimal digital filter was designed to clean human tremor signal for improving the welding seam tracking precision. The experimental results show that the digital filter suppresses the operator＇ s tremor signal.

Force assistant master-slave telerehabilitation robotic system

A prototype of the master slave telerehabilitation robotic system with force feedback is developed. This system contains a pair of robots with the master being operated by the therapist and the slave following the master to guide the patients to exercise. A slave device with a slave controller is designed to stretch and mobilize the impaired elbow joints accurately and safely. A master device with a master controller is designed to control/monitor the procedure of treatment and assess the outcome of treatment remotely and accurately. By using the twoport network theory and the circuit equivalent impedance models, the position-force control scheme is designed to generate force feedback for the therapist who is to be informed of the interaction force between the subject and the robot arm during exercise. Experiments were conducted with a healthy male. Results show that the therapist can guide the patient to exercise by the master arm and can feel the interaction forces between the impaired arm and the robot. Compared with the traditional therapy, this system is more cost-efficient, more convenient and safer for both the stroke patients and the clinicians.

Research on Master-slave Telerobot Force Telepresence Technology

A 3 DOF master-slave telerobot system is established for study on force telepresence technology. A force feedback and position control scheme is adopted in the bilateral force response control system,and force fidelity and controllability experiments demonstrate feasibility of the con-trol system.

Meet the RT-G:Robot Redefines Policing

In a bustling street in Wenzhou,east China’s Zhejiang Province,a futuristic ball-shaped robot recently made waves online as it patrolled alongside uniformed police officers.Developed through a collaboration between Wenzhou police and Zhejiang University,the RT-G is no ordinary robot.According to Huang Sufeng,deputy commander of a special patrol police brigade in Wenzhou,east China’s Zhejiang Province.

Master-Slave机器手协调控制选择行列式算法

提出了一种基于选择行列式的Master-Slave机器手的协调控制算法。通过选择行列式的导入,实现了对Master机器手和Slave机器手各个变量的协调控制。本方法应用于装有视觉传感器的机器手的追踪控制,经过实验证明了基于选择行列式的算法能够实现人类的某些技能赋予机器手,在支援机器手的同时还能够通过有效地协调遥控,完成机器手的自主控制。

基于RobotStudio的视觉分拣打磨工作站仿真设计

为解决中小型零件混流自动化生产等问题,提出基于RobotStudio的工业机器人视觉分拣打磨工作站的仿真设计方案。根据零件的生产工艺流程,利用UG软件创建视觉分拣打磨工作站的整体布局;通过分析工作站各个模块功能,设计了各模块的结构;利用RobotStudio软件构建了工作站仿真模型。以视觉引导Smart组件和输送链跟踪仿真为例,阐述了ABB工业机器人通过视觉引导获取工件空间位姿的四元数和欧拉角的转换方法,并介绍了视觉拍照、机器人与工业相机通信等动态仿真的设置过程,以及输送链跟踪动态效果的设置方法。为实现工作站全过程仿真,设计了整体工作站逻辑,编制了仿真工作站离线程序,并将仿真工作站同步到实验平台调试验证。该设计可为智能制造生产线的设计、制造及应用提供参考。

A Master-Slave Blockchain Paradigm and Application in Digital Rights Management

Upon flaws of current blockchain platforms of heavyweight, large capacity of ledger, and time-consuming of synchronization of data, in this paper, we proposed a new paradigm of master-slave blockchain scheme(MSB) for pervasive computing that suitable for general PC, mobile device such as smart phones or PADs to participants in the working of mining and verification, in which we separated traditional blockchain model in 2 layer defined as master node layer and a series of slavery agents layer, then we proposed 2 approaches for partially computing model(PCM) and non-computing of model(NCM) in the MSB blockchain, Finally large amounts of simulations manifest the proposed master-slave blockchain scheme is feasible, extendible and suitable for pervasive computing especially in the 5 G generation environment, and can apply in the DRM-related applications.

Achievement of chaotic synchronization trajectories of master-slave manipulators with feedback control strategy

This paper addresses a master-slave synchro- nization strategy for complex dynamic systems based on feedback control. This strategy is applied to 3-DOF pla- nar manipulators in order to obtain synchronization in such complicated as chaotic motions of end-effectors. A chaotic curve is selected from Duffing equation as the trajectory of master end-effector and a piecewise approximation method is proposed to accurately represent this chaotic trajectory of end-effectors. The dynamical equations of master-slave manipulators with synchronization controller are derived, and the Lyapunov stability theory is used to determine the stability of this controlled synchronization system. In numer- ical experiments, the synchronous motions of end-effectors as well as three joint angles and torques of master-slave manipulators are studied under the control of the proposed synchronization strategy. It is found that the positive gain matrix affects the implementation of synchronization con- trol strategy. This synchronization control strategy proves the synchronization＇s feasibility and controllability for com- plicated motions generated by master-slave manipulators.

Exponential networked synchronization of master-slave chaotic systems with timevarying communication topologies

The networked synchronization problem of a class of master-slave chaotic systems with time-varying communication topologies is investigated in this paper. Based on algebraic graph theory and matrix theory, a simple linear state feedback controller is designed to synchronize the master chaotic system and the slave chaotic systems with a time- varying communication topology connection. The exponential stability of the closed-loop networked synchronization error system is guaranteed by applying Lyapunov stability theory. The derived novel criteria are in the form of linear matrix inequalities （LMIs）, which are easy to examine and tremendously reduce the computation burden from the feedback matrices. This paper provides an alternative networked secure communication scheme which can be extended conveniently. An illustrative example is given to demonstrate the effectiveness of the proposed networked synchronization method.

A master-slave generalized predictive synchronization control for preheating process of multi-cavity hot runner system

As a key component of injection molding,multi-cavity hot runner(MCHR)system faces the crucial problem of polymer melt filling imbalance among the cavities.The thermal imbalance in the system has been considered as the leading cause.Hence,the solution may rest with the synchronization of those heating processes in MCHR system.This paper proposes a’Master-Slave’generalized predictive synchronization control(MS-GPSC)method with’Mr.Slowest’strategy for preheating stage of MCHR system.The core of the proposed method is choosing the heating process with slowest dynamics as the’Master’to track the setpoint,while the other heating processes are treated as‘Slaves’tracking the output of’Master’.This proposed method is shown to have the good ability of temperature synchronization.The corresponding analysis is conducted on parameters tuning and stability,simulations and experiments show the strategy is effective.

The evolution of robotics:research and application progress of dental implant robotic systems

The use of robots to augment human capabilities and assist in work has long been an aspiration.Robotics has been developing since the 1960s when the first industrial robot was introduced.As technology has advanced,robotic-assisted surgery has shown numerous advantages,including more precision,efficiency,minimal invasiveness,and safety than is possible with conventional techniques,which are research hotspots and cutting-edge trends.This article reviewed the history of medical robot development and seminal research papers about current research progress.Taking the autonomous dental implant robotic system as an example,the advantages and prospects of medical robotic systems would be discussed which would provide a reference for future research.

基于Robotstudio的工业机器人课程教学设计与实践

阐述工业机器人实训课程教学实践,将Robotstudio软件融入课程教学中,探讨以实例项目驱动的教学内容设计,以虚实结合手段提升课堂教学效果的教学模式,从而实现教学与实践的统一。

基于Robot Studio的分类码垛仿真设计

针对工业机器人轨迹规划和自动化生产协调难度大的问题,提出一种基于Robot Studio的分类码垛仿真设计方案。使用Robot Studio软件,创建工业机器人仿真工作站。通过Smart组件的设计、I/O信号的设定、工作站逻辑的建立和程序编写等工作,最终实现工业机器人智能分类码垛操作。经过模拟仿真,结果表明:分类码垛的速度和准确率均可达到预期要求。说明该分类码垛设计方案可行,可以为实际码垛工作站的搭建和生产提供一定的现实指导。

Adaptive H_∞ Synchronization of Master-slave Systems with Mixed Time-varying Delays and Nonlinear Perturbations: An LMI Approach

This paper proposes an adaptive synchronization problem for the master and slave structure of linear systems with nonlinear perturbations and mixed time-varying delays comprising different discrete and distributed time delays. Using an appropriate Lyapunov-Krasovskii functional, some delay-dependent sufficient conditions and an adaptation law including the master-slave parame- ters are established for designing a delayed synchronization law in terms of linear matrix inequalities（LMIs）. The time-varying controller guarantees the H ∞ synchronization of the two coupled master and slave systems regardless of their initial states. Particularly, it is shown that the synchronization speed can be controlled by adjusting the updated gain of the synchronization signal. Two numerical examples are given to demonstrate the effectiveness of the method.

Robotic versus laparoscopic surgery for sporadic benign insulinoma:Short-and long-term outcomes

Background:Minimally invasive surgery is the optimal treatment for insulinoma.The present study aimed to compare short-and long-term outcomes of laparoscopic and robotic surgery for sporadic benign insulinoma.Methods:A retrospective analysis of patients who underwent laparoscopic or robotic surgery for insulinoma at our center between September 2007 and December 2019 was conducted.The demographic,perioperative and postoperative follow-up results were compared between the laparoscopic and robotic groups.Results:A total of 85 patients were enrolled,including 36 with laparoscopic approach and 49 with robotic approach.Enucleation was the preferred surgical procedure.Fifty-nine patients(69.4%)underwent enucleation;among them,26 and 33 patients underwent laparoscopic and robotic surgery,respectively.Robotic enucleation had a lower conversion rate to laparotomy(0 vs.19.2%,P=0.013),shorter operative time(102.0 vs.145.5 min,P=0.008)and shorter postoperative hospital stay(6.0 vs.8.5 d,P=0.002)than laparoscopic enucleation.There were no differences between the groups in terms of intraoperative blood loss,the rates of postoperative pancreatic fistula and complications.After a median follow-up of 65 months,two patients in the laparoscopic group developed a functional recurrence and none of the patients in the robotic group had a recurrence.Conclusions:Robotic enucleation can reduce the conversion rate to laparotomy and shorten operative time,which might lead to a reduction in postoperative hospital stay.

Neuromorphic circuits based on memristors: endowing robots with a human-like brain

Robots are widely used,providing significant convenience in daily life and production.With the rapid development of artificial intelligence and neuromorphic computing in recent years,the realization of more intelligent robots through a pro-found intersection of neuroscience and robotics has received much attention.Neuromorphic circuits based on memristors used to construct hardware neural networks have proved to be a promising solution of shattering traditional control limita-tions in the field of robot control,showcasing characteristics that enhance robot intelligence,speed,and energy efficiency.Start-ing with introducing the working mechanism of memristors and peripheral circuit design,this review gives a comprehensive analysis on the biomimetic information processing and biomimetic driving operations achieved through the utilization of neuro-morphic circuits in brain-like control.Four hardware neural network approaches,including digital-analog hybrid circuit design,novel device structure design,multi-regulation mechanism,and crossbar array,are summarized,which can well simulate the motor decision-making mechanism,multi-information integration and parallel control of brain at the hardware level.It will be definitely conductive to promote the application of memristor-based neuromorphic circuits in areas such as intelligent robotics,artificial intelligence,and neural computing.Finally,a conclusion and future prospects are discussed.

Intervention Effect of Lower Limb Rehabilitation Robot with Task-Oriented Training on Stroke Patients and Its Influence on KFAROM Score

Objective: To explore the effect of lower limb rehabilitation robot combined with task-oriented training on stroke patients and its influence on KFAROM score. Methods: 100 stroke patients with hemiplegia admitted to our hospital from January 2023 to December 2023 were randomly divided into two groups, the control group (50 cases) was given task-oriented training assisted by nurses, and the observation group (50 cases) was given lower limb rehabilitation robot with task-oriented training. Lower limb balance, lower limb muscle strength, motor function, ankle function, knee flexion range of motion and walking ability were observed. Results: After treatment, the scores of BBS, quadriceps femoris and hamstrings in the observation group were significantly higher than those in the control group (P Conclusion: In the clinical treatment of stroke patients, the combination of task-oriented training and lower limb rehabilitation robot can effectively improve the lower limb muscle strength, facilitate the recovery of balance function, and have a significant effect on the recovery of motor function, which can improve the walking ability of stroke patients and the range of motion of knee flexion, and achieve more ideal therapeutic effectiveness.

Advanced Design of Soft Robots with Artificial Intelligence

In recent years,breakthrough has been made in the field of artificial intelligence(AI),which has also revolutionized the industry of robotics.Soft robots featured with high-level safety,less weight,lower power consumption have always been one of the research hotspots.Recently,multifunctional sensors for perception of soft robotics have been rapidly developed,while more algorithms and models of machine learning with high accuracy have been optimized and proposed.Designs of soft robots with AI have also been advanced ranging from multimodal sensing,human-machine interaction to effective actuation in robotic systems.Nonethe-less,comprehensive reviews concerning the new developments and strategies for the ingenious design of the soft robotic systems equipped with AI are rare.Here,the new development is systematically reviewed in the field of soft robots with AI.First,background and mechanisms of soft robotic systems are briefed,after which development focused on how to endow the soft robots with AI,including the aspects of feeling,thought and reaction,is illustrated.Next,applications of soft robots with AI are systematically summarized and discussed together with advanced strategies proposed for performance enhancement.Design thoughts for future intelligent soft robotics are pointed out.Finally,some perspectives are put forward.