Road traffic monitoring is an imperative topic widely discussed among researchers.Systems used to monitor traffic frequently rely on cameras mounted on bridges or roadsides.However,aerial images provide the flexibilit...Road traffic monitoring is an imperative topic widely discussed among researchers.Systems used to monitor traffic frequently rely on cameras mounted on bridges or roadsides.However,aerial images provide the flexibility to use mobile platforms to detect the location and motion of the vehicle over a larger area.To this end,different models have shown the ability to recognize and track vehicles.However,these methods are not mature enough to produce accurate results in complex road scenes.Therefore,this paper presents an algorithm that combines state-of-the-art techniques for identifying and tracking vehicles in conjunction with image bursts.The extracted frames were converted to grayscale,followed by the application of a georeferencing algorithm to embed coordinate information into the images.The masking technique eliminated irrelevant data and reduced the computational cost of the overall monitoring system.Next,Sobel edge detection combined with Canny edge detection and Hough line transform has been applied for noise reduction.After preprocessing,the blob detection algorithm helped detect the vehicles.Vehicles of varying sizes have been detected by implementing a dynamic thresholding scheme.Detection was done on the first image of every burst.Then,to track vehicles,the model of each vehicle was made to find its matches in the succeeding images using the template matching algorithm.To further improve the tracking accuracy by incorporating motion information,Scale Invariant Feature Transform(SIFT)features have been used to find the best possible match among multiple matches.An accuracy rate of 87%for detection and 80%accuracy for tracking in the A1 Motorway Netherland dataset has been achieved.For the Vehicle Aerial Imaging from Drone(VAID)dataset,an accuracy rate of 86%for detection and 78%accuracy for tracking has been achieved.展开更多
Analysis and recognition of ancient scripts is a challenging task as these scripts are inscribed on pillars,stones,or leaves.Optical recognition systems can help in preserving,sharing,and accelerate the study of the a...Analysis and recognition of ancient scripts is a challenging task as these scripts are inscribed on pillars,stones,or leaves.Optical recognition systems can help in preserving,sharing,and accelerate the study of the ancient scripts,but lack of standard dataset for such scripts is a major constraint.Although many scholars and researchers have captured and uploaded inscription images on various websites,manual searching,downloading and extraction of these images is tedious and error prone.Web search queries return a vast number of irrelevant results,and manually extracting images for a specific script is not scalable.This paper proposes a novelmultistage system to identify the specific set of script images from a large set of images downloaded from web sources.The proposed system combines the two most important pattern matching techniques-Scale Invariant Feature Transform(SIFT)and Template matching,in a sequential pipeline,and by using the key strengths of each technique,the system can discard irrelevant images while retaining a specific type of images.展开更多
In this paper, a template matching and location method, which has been rapidly adopted in microseismic research in recent years, is applied to laboratory acoustic emission(AE) monitoring. First, we used traditional me...In this paper, a template matching and location method, which has been rapidly adopted in microseismic research in recent years, is applied to laboratory acoustic emission(AE) monitoring. First, we used traditional methods to detect P-wave first motions and locate AE hypocenters in three dimensions. In addition, we selected events located with sufficient accuracy(normally corresponding AE events of relatively larger energy, showing clear P-wave first motion and a higher signal-to-noise ratio in most channels) as template events. Then, the template events were used to scan and match other poorly located events in triggered event records or weak events in continuous records. Through crosscorrelation of the multi-channel waveforms between the template and the event to be detected, the weak signal was detected and located using a grid-searching algorithm(with the grid centered at the template hypocenter). In order to examine the performance of the approach, we calibrated the proposed method using experimental data of different rocks and different types of experiments. The results show that the proposed method can significantly improve the detection capability and location accuracy, and can be applied to various laboratory and in situ experiments, which use multi-channel AE monitoring with waveforms recorded in either triggering or continuous mode.展开更多
Phased array radar has been applied broadly because of its sound performance.But signal of phased array radar is of a wide variety of types.Therefore,recognition of phased array radar is the most puzzling aspect of th...Phased array radar has been applied broadly because of its sound performance.But signal of phased array radar is of a wide variety of types.Therefore,recognition of phased array radar is the most puzzling aspect of the whole emitter identification domain.To solve the problem,the article proposes the method that identifies phased array radar by pulse amplitude information,and studies the phased array radar,models transmit signal of them,and receiving signal by radar countermeasure reconnaissance receiver.From constructing template of pulse train's amplitude vector of mechanical scanning radar,computing distance of samples and standard template,finding threshold of the template matching arithmetic,the article puts forward the template matching algorithm of radar beam scan type recognition to identify phased array radar automatically.展开更多
Template matching is a useful method to detect seismic events through waveform similarity between two signals.The traditional template matching method works well in detecting small tectonic earthquakes.However,the met...Template matching is a useful method to detect seismic events through waveform similarity between two signals.The traditional template matching method works well in detecting small tectonic earthquakes.However,the method has some difficulty when the signals have relatively low signal-to-noise ratios(SNRs)and simple shapes,e.g.a sinusoidal function.In this study,we modify the traditional template matching approach for this situation.We first construct a virtual three-component seismic station using vertical-component waveforms recorded by three stations.Next,we select a template event from the virtual station,and apply the traditional template matching.We then verify this method by detecting icequakes with simple waveforms on the Urumqi Glacier No.1 and compare the results with those from the short-term-averages over long-term-average(STA/LTA),the REST method,and traditional template matching method.It can be concluded that the modified template matching method using virtual stations has some advantages for seismic data with low SNRs.展开更多
To tackle the problem of severe occlusions in visual tracking, we propose a hierarchical template-matching method based on a layered appearance model. This model integrates holistic- and part-region matching in order ...To tackle the problem of severe occlusions in visual tracking, we propose a hierarchical template-matching method based on a layered appearance model. This model integrates holistic- and part-region matching in order to locate an object in a coarse-to-fine manner. Furthermore, in order to reduce ambiguity in object localization, only the discriminative parts of an object' s appearance template are chosen for similarity computing with respect to their cornerness measurements. The similarity between parts is computed in a layer-wise manner, and from this, occlusions can be evaluated. When the object is partly occluded, it can be located accurately by matching candidate regions with the appearance template. When it is completely occluded, its location can be predicted from its historical motion information using a Kalman filter. The proposed tracker is tested on several practical image sequences, and the experimental results show that it can consistently provide accurate object location for stable tracking, even for severe occlusions.展开更多
NIST(National Institute of Standards and Technology) statistical test recognized as the most authoritative is widely used in verifying the randomness of binary sequences. The Non-overlapping Template Matching Test as ...NIST(National Institute of Standards and Technology) statistical test recognized as the most authoritative is widely used in verifying the randomness of binary sequences. The Non-overlapping Template Matching Test as the 7 th test of the NIST Test Suit is remarkably time consuming and the slow performance is one of the major hurdles in the testing process. In this paper, we present an efficient bit-parallel matching algorithm and segmented scan-based strategy for execution on Graphics Processing Unit(GPU) using NVIDIA Compute Unified Device Architecture(CUDA). Experimental results show the significant performance improvement of the parallelized Non-overlapping Template Matching Test, the running speed is 483 times faster than the original NIST implementation without attenuating the test result accuracy.展开更多
Human activity recognition(HAR)can play a vital role in the monitoring of human activities,particularly for healthcare conscious individuals.The accuracy of HAR systems is completely reliant on the extraction of promi...Human activity recognition(HAR)can play a vital role in the monitoring of human activities,particularly for healthcare conscious individuals.The accuracy of HAR systems is completely reliant on the extraction of prominent features.Existing methods find it very challenging to extract optimal features due to the dynamic nature of activities,thereby reducing recognition performance.In this paper,we propose a robust feature extraction method for HAR systems based on template matching.Essentially,in this method,we want to associate a template of an activity frame or sub-frame comprising the corresponding silhouette.In this regard,the template is placed on the frame pixels to calculate the equivalent number of pixels in the template correspondent those in the frame.This process is replicated for the whole frame,and the pixel is directed to the optimum match.The best count is estimated to be the pixel where the silhouette(provided via the template)presented inside the frame.In this way,the feature vector is generated.After feature vector generation,the hiddenMarkovmodel(HMM)has been utilized to label the incoming activity.We utilized different publicly available standard datasets for experiments.The proposed method achieved the best accuracy against existing state-of-the-art systems.展开更多
Traditional fingerprints matching approaches are based on the minutiae and the texture characteristics. It is difficult for today's techniques to deal with the images captured by the solid-state fingerprint sensor...Traditional fingerprints matching approaches are based on the minutiae and the texture characteristics. It is difficult for today's techniques to deal with the images captured by the solid-state fingerprint sensors because the sampling area of these sensors is very small and only portion of the fingerprint can be obtained. In this paper, a novel integrated template has been built using several images and combining the minutiae with the texture characteristics at the same time. By using a kind of Gabor filters (eight directions) on the region around the reliable minutiae, local texture of each minutia termed as minutiacode is extracted. Further, a real-time matching algorithm using the integrated template is presented. The output is determined by the weight factor of the compound matching. Finally, experimental results show that this system performs well in reducing false reject rate (FRR).展开更多
Template matching is a fundamental task in computer vision and has been studied for decades.It plays an essential role in manufacturing industry for estimating the poses of different parts,facilitating downstream task...Template matching is a fundamental task in computer vision and has been studied for decades.It plays an essential role in manufacturing industry for estimating the poses of different parts,facilitating downstream tasks such as robotic grasping.Existing methods fail when the template and source images have different modalities,cluttered backgrounds,or weak textures.They also rarely consider geometric transformations via homographies,which commonly exist even for planar industrial parts.To tackle the challenges,we propose an accurate template matching method based on differentiable coarse-tofine correspondence refinement.We use an edge-aware module to overcome the domain gap between the mask template and the grayscale image,allowing robust matching.An initial warp is estimated using coarse correspondences based on novel structure-aware information provided by transformers.This initial alignment is passed to a refinement network using references and aligned images to obtain sub-pixel level correspondences which are used to give the final geometric transformation.Extensive evaluation shows that our method to be significantly better than state-of-the-art methods and baselines,providing good generalization ability and visually plausible results even on unseen real data.展开更多
Chip surface character recognition is an important part of quality inspection in the field of microelectronics manufacturing.By recognizing the character information on the chip,automated production,quality control,an...Chip surface character recognition is an important part of quality inspection in the field of microelectronics manufacturing.By recognizing the character information on the chip,automated production,quality control,and data collection and analysis can be achieved.This article studies a chip surface character recognition method based on the OpenCV vision library.Firstly,the obtained chip images are preprocessed.Secondly,the template matching method is used to locate the chip position.In addition,the surface characters on the chip are individually segmented,and each character image is extracted separately.Finally,a Support Vector Machine(SVM)is used to classify and recognize characters.The results show that this method can accurately recognize the surface characters of chips and meet the requirements of chip quality inspection.展开更多
Target tracking is very important in computer vision and related areas. It is usually difficult to accurately track fast motion target with appearance variations. Sometimes the tracking algorithms fail for heavy appea...Target tracking is very important in computer vision and related areas. It is usually difficult to accurately track fast motion target with appearance variations. Sometimes the tracking algorithms fail for heavy appearance variations. A multiple template method to track fast motion target with appearance changes is presented under the framework of appearance model with Kalman filter. Firstly, we construct a multiple template appearance model, which includes both the original template and templates affinely transformed from original one. Generally speaking, appearance variations of fast motion target can be covered by affine transformation. Therefore, the affine tr templates match the target of appearance variations better than conventional models. Secondly, we present an improved Kalman filter for approx- imate estimating the motion trail of the target and a modified similarity evaluation function for exact matching. The estimation approach can reduce time complexity of the algorithm and keep accuracy in the meantime. Thirdly, we propose an adaptive scheme for updating template set to alleviate the drift problem. The scheme considers the following differences: the weight differences in two successive frames; different types of affine transformation applied to templates. Finally, experiments demonstrate that the proposed algorithm is robust to appearance varia- tion of fast motion target and achieves real-time performance on middle/low-range computing platform.展开更多
This research introduces a challenge in integrating and cleaning the data,which is a crucial task in object matching.While the object is detected and then measured,the vibration at different light intensities may influ...This research introduces a challenge in integrating and cleaning the data,which is a crucial task in object matching.While the object is detected and then measured,the vibration at different light intensities may influence the durability and reliability of mechanical systems or structures and cause problems such as damage,abnormal stopping,and disaster.Recent research failed to improve the accuracy rate and the computation time in tracking an object and in the vibration measurement.To solve all these problems,this proposed research simplifies the scaling factor determination by assigning a known real-world dimension to a predetermined portion of the image.A novel white color sticker of the known dimensions marked with a color dot is pasted on the surface of an object for the best result in the template matching using the Improved Up-Sampled Cross-Correlation(UCC)algorithm.The vibration measurement is calculated using the Finite-Difference Algorithm(FDA),a machine vision systemfitted with a macro lens sensor that is capable of capturing the image at a closer range,which does not affect the quality of displacement measurement from the video frames.Thefield test was conducted on the TAFE(Tractors and Farm Equipment Limited)tractor parts,and the percentage of error was recorded between 30%and 50%at very low vibration values close to zero,whereas it was recorded between 5%and 10%error in most high-accelerations,the essential range for vibration analysis.Finally,the suggested system is more suitable for measuring the vibration of stationary machinery having low frequency ranges.The use of a macro lens enables to capture of image frames at very close-ups.A 30%to 50%error percentage has been reported when the vibration amplitude is very small.Therefore,this study is not suitable for Nano vibration analysis.展开更多
Purpose-Steady-state visual evoked potential(SSVEP)has been widely used in the application of electroencephalogram(EEG)based non-invasive brain computer interface(BCI)due to its characteristics of high accuracy and in...Purpose-Steady-state visual evoked potential(SSVEP)has been widely used in the application of electroencephalogram(EEG)based non-invasive brain computer interface(BCI)due to its characteristics of high accuracy and information transfer rate(ITR).To recognize the SSVEP components in collected EEG trials,a lot of recognition algorithms based on template matching of training trials have been proposed and applied in recent years.In this paper,a comparative survey of SSVEP recognition algorithms based on template matching of training trails has been done.Design/methodology/approach-To survey and compare the recently proposed recognition algorithms for SSVEP,this paper regarded the conventional canonical correlated analysis(CCA)as the baseline,and selected individual template CCA(ITCCA),multi-set CCA(MsetCCA),task related component analysis(TRCA),latent common source extraction(LCSE)and a sum of squared correlation(SSCOR)for comparison.Findings-For the horizontal comparative of the six surveyed recognition algorithms,this paper adopted the“Tsinghua JFPM-SSVEP”data set and compared the average recognition performance on such data set.The comparative contents including:recognition accuracy,ITR,correlated coefficient and R-square values under different time duration of the SSVEP stimulus presentation.Based on the optimal time duration of stimulus presentation,the author has also compared the efficiency of the six compared algorithms.To measure the influence of different parameters,the number of training trials,the number of electrodes and the usage of filter bank preprocessing were compared in the ablation study.Originality/value-Based on the comparative results,this paper analyzed the advantages and disadvantages of the six compared SSVEP recognition algorithms by considering application scenes,realtime and computational complexity.Finally,the author gives the algorithms selection range for the recognition of real-world online SSVEP-BCI.展开更多
A robust and eficient feature matching method is necessary for visual navigation in asteroid-landing missions.Based on the visual navigation framework and motion characteristics of asteroids,a robust and efficient tem...A robust and eficient feature matching method is necessary for visual navigation in asteroid-landing missions.Based on the visual navigation framework and motion characteristics of asteroids,a robust and efficient template feature matching method is proposed to adapt to feature distortion and scale change cases for visual navigation of asteroids.The proposed method is primarily based on a motion-constrained discriminative correlation filter(DCF).The prior information provided by the motion constraints between sequence images is used to provide a predicted search region for template feature matching.Additionally,some specific template feature samples are generated using the motion constraints for correlation filter learning,which is beneficial for training a scale and feature distortion adaptive correlation filter for accurate feature matching.Moreover,average peak-to-correlation energy(APCE)and jointly consistent measurements(JCMs)were used to eliminate false matching.Images captured by the Touch And Go Camera System(TAGCAMS)of the Bennu asteroid were used to evaluate the performance of the proposed method.In particular,both the robustness and accuracy of region matching and template center matching are evaluated.The qualitative and quantitative results illustrate the advancement of the proposed method in adapting to feature distortions and large-scale changes during spacecraft landing.展开更多
Multi-modal image matching is crucial in aerospace applications because it can fully exploit the complementary and valuable information contained in the amount and diversity of remote sensing images.However,it remains...Multi-modal image matching is crucial in aerospace applications because it can fully exploit the complementary and valuable information contained in the amount and diversity of remote sensing images.However,it remains a challenging task due to significant non-linear radiometric,geometric differences,and noise across different sensors.To improve the performance of heterologous image matching,this paper proposes a normalized self-similarity region descriptor to extract consistent structural information.We first construct the pointwise self-similarity region descriptor based on the Euclidean distance between adjacent image blocks to reflect the structural properties of multi-modal images.Then,a linear normalization approach is used to form Modality Independent Region Descriptor(MIRD),which can effectively distinguish structural features such as points,lines,corners,and flat between multi-modal images.To further improve the matching accuracy,the included angle cosine similarity metric is adopted to exploit the directional vector information of multi-dimensional feature descriptors.The experimental results show that the proposed MIRD has better matching accuracy and robustness for various multi-modal image matching than the state-of-the-art methods.MIRD can effectively extract consistent geometric structure features and suppress the influence of SAR speckle noise using non-local neighboring image blocks operation,effectively applied to various multi-modal image matching.展开更多
Understanding power system dynamics after an event occurs is essential for the purpose of online stability assessment and control applications.Wide area measurement systems(WAMS)based on synchrophasors make power syst...Understanding power system dynamics after an event occurs is essential for the purpose of online stability assessment and control applications.Wide area measurement systems(WAMS)based on synchrophasors make power system dynamics visible to system operators,delivering an accurate picture of overall operating conditions.However,in actual field implementations,some measurements can be inaccessible for various reasons,e.g.,most notably communication failure.To reconstruct these inaccessible measurements,in this paper,the radial basis function artificial neural network(RBF-ANN)is used to estimate the system dynamics.In order to find the best input features of the RBF-ANN model,geometric template matching(GeTeM)and quality-threshold(QT)clustering are employed from the time series analysis to compute the similarity of frequency dynamic responses in different locations of the power system.The proposed method is tested and verified on the Eastern Interconnection(EI)transmission system in the United States.The results obtained indicate that the proposed approach provides a compact and efficient RBF-ANN model that accurately estimates the inaccessible frequency dynamic responses under different operating conditions and with fewer inputs.展开更多
The concept and advantage of reconfigurable technology is introduced. A kind of processor architecture of re configurable macro processor (RMP) model based on FPGA array and DSP is put forward and has been implemented...The concept and advantage of reconfigurable technology is introduced. A kind of processor architecture of re configurable macro processor (RMP) model based on FPGA array and DSP is put forward and has been implemented. Two image algorithms are developed: template-based automatic target recognition and zone labeling. One is estimating for motion direction in the infrared image background, another is line picking-up algorithm based on image zone labeling and phase grouping technique. It is a kind of 'hardware' function that can be called by the DSP in high-level algorithm. It is also a kind of hardware algorithm of the DSP. The results of experiments show the reconfigurable computing technology based on RMP is an ideal accelerating means to deal with the high-speed image processing tasks. High real time performance is obtained in our two applications on RMP.展开更多
Seismic data processing techniques,together with seismic instrumentation,determine our earthquake monitoring capability and the quality of resulting earthquake catalogs.This paper is intended to review the improvement...Seismic data processing techniques,together with seismic instrumentation,determine our earthquake monitoring capability and the quality of resulting earthquake catalogs.This paper is intended to review the improvement of earthquake monitoring capability from the perspective of data processing.Over the past two decades,seismologists have made considerable advancements in seismic data processing,partly thanks to the significant development of computational power,signal processing,and machine learning techniques.In particular,wide application of template matching and increasing use of deep learning significantly enhance our capability to extract signals of small earthquakes from noisy data.Relative location techniques provide a critical tool to elucidate fault geometries and seismicity migration patterns at unprecedented resolution.These techniques are becoming standard,leading to emerging intelligent software systems for next-generation earthquake monitoring.Prospective improvements in future research must consider the urgent needs in highly generalizable detection algorithms(for both permanent and temporary deployments)and in emergency real-time monitoring of ongoing sequences(e.g.,aftershock and induced seismicity sequences).We believe that the maturing of intelligent and high-resolution processing systems could transform traditional earthquake monitoring workflows and eventually liberate seismologists from laborious catalog construction tasks.展开更多
For the autonomous guided vehicle (AGV) used mainly in unfixed work fields, a machine vision method was proposed for the navigation system, in which a series of navigation-signs are placed along the travel route. The ...For the autonomous guided vehicle (AGV) used mainly in unfixed work fields, a machine vision method was proposed for the navigation system, in which a series of navigation-signs are placed along the travel route. The navigation system detects and recognizes these signs, and accordingly informs the travel control system. In order for the navigation to have balanced ability of 1) covering a large area and 2) recognizing details of the sign, the proposed vision method was designed to be a hybrid one, using both the stereo vision and the traditional 2D template matching. The former implemented a coarse recognition function for above 1), and the later implemented a fine recognition function for above 2). The results from the coarse recognition were used in the fine recognition for the gaze control to input suitable 2D image of the signs. Experiments on a prototype system show the feasibility of the proposed hybrid method in achieving the objective specifications for a typical AGV.展开更多
基金supported by a grant from the Basic Science Research Program through the National Research Foundation(NRF)(2021R1F1A1063634)funded by the Ministry of Science and ICT(MSIT),Republic of KoreaThe authors are thankful to the Deanship of Scientific Research at Najran University for funding this work under the Research Group Funding Program Grant Code(NU/RG/SERC/13/40)+2 种基金Also,the authors are thankful to Prince Satam bin Abdulaziz University for supporting this study via funding from Prince Satam bin Abdulaziz University project number(PSAU/2024/R/1445)This work was also supported by Princess Nourah bint Abdulrahman University Researchers Supporting Project Number(PNURSP2023R54)Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘Road traffic monitoring is an imperative topic widely discussed among researchers.Systems used to monitor traffic frequently rely on cameras mounted on bridges or roadsides.However,aerial images provide the flexibility to use mobile platforms to detect the location and motion of the vehicle over a larger area.To this end,different models have shown the ability to recognize and track vehicles.However,these methods are not mature enough to produce accurate results in complex road scenes.Therefore,this paper presents an algorithm that combines state-of-the-art techniques for identifying and tracking vehicles in conjunction with image bursts.The extracted frames were converted to grayscale,followed by the application of a georeferencing algorithm to embed coordinate information into the images.The masking technique eliminated irrelevant data and reduced the computational cost of the overall monitoring system.Next,Sobel edge detection combined with Canny edge detection and Hough line transform has been applied for noise reduction.After preprocessing,the blob detection algorithm helped detect the vehicles.Vehicles of varying sizes have been detected by implementing a dynamic thresholding scheme.Detection was done on the first image of every burst.Then,to track vehicles,the model of each vehicle was made to find its matches in the succeeding images using the template matching algorithm.To further improve the tracking accuracy by incorporating motion information,Scale Invariant Feature Transform(SIFT)features have been used to find the best possible match among multiple matches.An accuracy rate of 87%for detection and 80%accuracy for tracking in the A1 Motorway Netherland dataset has been achieved.For the Vehicle Aerial Imaging from Drone(VAID)dataset,an accuracy rate of 86%for detection and 78%accuracy for tracking has been achieved.
文摘Analysis and recognition of ancient scripts is a challenging task as these scripts are inscribed on pillars,stones,or leaves.Optical recognition systems can help in preserving,sharing,and accelerate the study of the ancient scripts,but lack of standard dataset for such scripts is a major constraint.Although many scholars and researchers have captured and uploaded inscription images on various websites,manual searching,downloading and extraction of these images is tedious and error prone.Web search queries return a vast number of irrelevant results,and manually extracting images for a specific script is not scalable.This paper proposes a novelmultistage system to identify the specific set of script images from a large set of images downloaded from web sources.The proposed system combines the two most important pattern matching techniques-Scale Invariant Feature Transform(SIFT)and Template matching,in a sequential pipeline,and by using the key strengths of each technique,the system can discard irrelevant images while retaining a specific type of images.
基金funding support from Grant-in-Aid for Scientific Research(Grant No.19H00722)by Japan Society for the Promotion of Science(JSPS)。
文摘In this paper, a template matching and location method, which has been rapidly adopted in microseismic research in recent years, is applied to laboratory acoustic emission(AE) monitoring. First, we used traditional methods to detect P-wave first motions and locate AE hypocenters in three dimensions. In addition, we selected events located with sufficient accuracy(normally corresponding AE events of relatively larger energy, showing clear P-wave first motion and a higher signal-to-noise ratio in most channels) as template events. Then, the template events were used to scan and match other poorly located events in triggered event records or weak events in continuous records. Through crosscorrelation of the multi-channel waveforms between the template and the event to be detected, the weak signal was detected and located using a grid-searching algorithm(with the grid centered at the template hypocenter). In order to examine the performance of the approach, we calibrated the proposed method using experimental data of different rocks and different types of experiments. The results show that the proposed method can significantly improve the detection capability and location accuracy, and can be applied to various laboratory and in situ experiments, which use multi-channel AE monitoring with waveforms recorded in either triggering or continuous mode.
基金Supported by the National Science and Technology Supported Program of China(No.2011BAH24B06)
文摘Phased array radar has been applied broadly because of its sound performance.But signal of phased array radar is of a wide variety of types.Therefore,recognition of phased array radar is the most puzzling aspect of the whole emitter identification domain.To solve the problem,the article proposes the method that identifies phased array radar by pulse amplitude information,and studies the phased array radar,models transmit signal of them,and receiving signal by radar countermeasure reconnaissance receiver.From constructing template of pulse train's amplitude vector of mechanical scanning radar,computing distance of samples and standard template,finding threshold of the template matching arithmetic,the article puts forward the template matching algorithm of radar beam scan type recognition to identify phased array radar automatically.
基金financially supported by the National Key R&D Program of China(No.2018YFC1504200)the LU JIAXI International Team Program from the KC Wong Education Foundation and CAS(No.GJTD-2018-12)National Natural Science Foundation of China(Nos.41661164035 and 41704066).
文摘Template matching is a useful method to detect seismic events through waveform similarity between two signals.The traditional template matching method works well in detecting small tectonic earthquakes.However,the method has some difficulty when the signals have relatively low signal-to-noise ratios(SNRs)and simple shapes,e.g.a sinusoidal function.In this study,we modify the traditional template matching approach for this situation.We first construct a virtual three-component seismic station using vertical-component waveforms recorded by three stations.Next,we select a template event from the virtual station,and apply the traditional template matching.We then verify this method by detecting icequakes with simple waveforms on the Urumqi Glacier No.1 and compare the results with those from the short-term-averages over long-term-average(STA/LTA),the REST method,and traditional template matching method.It can be concluded that the modified template matching method using virtual stations has some advantages for seismic data with low SNRs.
基金supported by the Aeronautical Science Foundation of China under Grant 20115169016supported in part by the technique cooperation project of ZTE on Intelligent Video Analysis in 2012
文摘To tackle the problem of severe occlusions in visual tracking, we propose a hierarchical template-matching method based on a layered appearance model. This model integrates holistic- and part-region matching in order to locate an object in a coarse-to-fine manner. Furthermore, in order to reduce ambiguity in object localization, only the discriminative parts of an object' s appearance template are chosen for similarity computing with respect to their cornerness measurements. The similarity between parts is computed in a layer-wise manner, and from this, occlusions can be evaluated. When the object is partly occluded, it can be located accurately by matching candidate regions with the appearance template. When it is completely occluded, its location can be predicted from its historical motion information using a Kalman filter. The proposed tracker is tested on several practical image sequences, and the experimental results show that it can consistently provide accurate object location for stable tracking, even for severe occlusions.
基金supported in part by Shanxi Scholarship Council of China(Grant No.2017-key-2)the Natural Science Foundation of Shanxi Province(Grant No.201801D121145)+1 种基金the Natural Science Foundation of China(NSFC)(Grant No.61731014,61705157,61927811)the Program for Guangdong Introducing Innovative and Entrepreneurial Teams。
文摘NIST(National Institute of Standards and Technology) statistical test recognized as the most authoritative is widely used in verifying the randomness of binary sequences. The Non-overlapping Template Matching Test as the 7 th test of the NIST Test Suit is remarkably time consuming and the slow performance is one of the major hurdles in the testing process. In this paper, we present an efficient bit-parallel matching algorithm and segmented scan-based strategy for execution on Graphics Processing Unit(GPU) using NVIDIA Compute Unified Device Architecture(CUDA). Experimental results show the significant performance improvement of the parallelized Non-overlapping Template Matching Test, the running speed is 483 times faster than the original NIST implementation without attenuating the test result accuracy.
基金The authors extend their appreciation to the Deputyship for Research&Innovation,Ministry of Education in Saudi Arabia for funding this work through the Project Number“375213500”.
文摘Human activity recognition(HAR)can play a vital role in the monitoring of human activities,particularly for healthcare conscious individuals.The accuracy of HAR systems is completely reliant on the extraction of prominent features.Existing methods find it very challenging to extract optimal features due to the dynamic nature of activities,thereby reducing recognition performance.In this paper,we propose a robust feature extraction method for HAR systems based on template matching.Essentially,in this method,we want to associate a template of an activity frame or sub-frame comprising the corresponding silhouette.In this regard,the template is placed on the frame pixels to calculate the equivalent number of pixels in the template correspondent those in the frame.This process is replicated for the whole frame,and the pixel is directed to the optimum match.The best count is estimated to be the pixel where the silhouette(provided via the template)presented inside the frame.In this way,the feature vector is generated.After feature vector generation,the hiddenMarkovmodel(HMM)has been utilized to label the incoming activity.We utilized different publicly available standard datasets for experiments.The proposed method achieved the best accuracy against existing state-of-the-art systems.
文摘Traditional fingerprints matching approaches are based on the minutiae and the texture characteristics. It is difficult for today's techniques to deal with the images captured by the solid-state fingerprint sensors because the sampling area of these sensors is very small and only portion of the fingerprint can be obtained. In this paper, a novel integrated template has been built using several images and combining the minutiae with the texture characteristics at the same time. By using a kind of Gabor filters (eight directions) on the region around the reliable minutiae, local texture of each minutia termed as minutiacode is extracted. Further, a real-time matching algorithm using the integrated template is presented. The output is determined by the weight factor of the compound matching. Finally, experimental results show that this system performs well in reducing false reject rate (FRR).
基金supported in part by the National Key R&D Program of China(2018AAA0102200)the National Natural Science Foundation of China(62002375,62002376,62325221,62132021).
文摘Template matching is a fundamental task in computer vision and has been studied for decades.It plays an essential role in manufacturing industry for estimating the poses of different parts,facilitating downstream tasks such as robotic grasping.Existing methods fail when the template and source images have different modalities,cluttered backgrounds,or weak textures.They also rarely consider geometric transformations via homographies,which commonly exist even for planar industrial parts.To tackle the challenges,we propose an accurate template matching method based on differentiable coarse-tofine correspondence refinement.We use an edge-aware module to overcome the domain gap between the mask template and the grayscale image,allowing robust matching.An initial warp is estimated using coarse correspondences based on novel structure-aware information provided by transformers.This initial alignment is passed to a refinement network using references and aligned images to obtain sub-pixel level correspondences which are used to give the final geometric transformation.Extensive evaluation shows that our method to be significantly better than state-of-the-art methods and baselines,providing good generalization ability and visually plausible results even on unseen real data.
基金Henan Province Science and Technology Research Project“Key Technologies for Intelligent Recognition of Chip Surface Defects Based on Machine Vision”(Project No.242102210161).
文摘Chip surface character recognition is an important part of quality inspection in the field of microelectronics manufacturing.By recognizing the character information on the chip,automated production,quality control,and data collection and analysis can be achieved.This article studies a chip surface character recognition method based on the OpenCV vision library.Firstly,the obtained chip images are preprocessed.Secondly,the template matching method is used to locate the chip position.In addition,the surface characters on the chip are individually segmented,and each character image is extracted separately.Finally,a Support Vector Machine(SVM)is used to classify and recognize characters.The results show that this method can accurately recognize the surface characters of chips and meet the requirements of chip quality inspection.
基金Supported by the National Science Foundation of China(61472289)Hubei Province Science Foundation(2015CFB254)
文摘Target tracking is very important in computer vision and related areas. It is usually difficult to accurately track fast motion target with appearance variations. Sometimes the tracking algorithms fail for heavy appearance variations. A multiple template method to track fast motion target with appearance changes is presented under the framework of appearance model with Kalman filter. Firstly, we construct a multiple template appearance model, which includes both the original template and templates affinely transformed from original one. Generally speaking, appearance variations of fast motion target can be covered by affine transformation. Therefore, the affine tr templates match the target of appearance variations better than conventional models. Secondly, we present an improved Kalman filter for approx- imate estimating the motion trail of the target and a modified similarity evaluation function for exact matching. The estimation approach can reduce time complexity of the algorithm and keep accuracy in the meantime. Thirdly, we propose an adaptive scheme for updating template set to alleviate the drift problem. The scheme considers the following differences: the weight differences in two successive frames; different types of affine transformation applied to templates. Finally, experiments demonstrate that the proposed algorithm is robust to appearance varia- tion of fast motion target and achieves real-time performance on middle/low-range computing platform.
文摘This research introduces a challenge in integrating and cleaning the data,which is a crucial task in object matching.While the object is detected and then measured,the vibration at different light intensities may influence the durability and reliability of mechanical systems or structures and cause problems such as damage,abnormal stopping,and disaster.Recent research failed to improve the accuracy rate and the computation time in tracking an object and in the vibration measurement.To solve all these problems,this proposed research simplifies the scaling factor determination by assigning a known real-world dimension to a predetermined portion of the image.A novel white color sticker of the known dimensions marked with a color dot is pasted on the surface of an object for the best result in the template matching using the Improved Up-Sampled Cross-Correlation(UCC)algorithm.The vibration measurement is calculated using the Finite-Difference Algorithm(FDA),a machine vision systemfitted with a macro lens sensor that is capable of capturing the image at a closer range,which does not affect the quality of displacement measurement from the video frames.Thefield test was conducted on the TAFE(Tractors and Farm Equipment Limited)tractor parts,and the percentage of error was recorded between 30%and 50%at very low vibration values close to zero,whereas it was recorded between 5%and 10%error in most high-accelerations,the essential range for vibration analysis.Finally,the suggested system is more suitable for measuring the vibration of stationary machinery having low frequency ranges.The use of a macro lens enables to capture of image frames at very close-ups.A 30%to 50%error percentage has been reported when the vibration amplitude is very small.Therefore,this study is not suitable for Nano vibration analysis.
基金supported by National Natural Science Foundation of China(Grant No.62106049).
文摘Purpose-Steady-state visual evoked potential(SSVEP)has been widely used in the application of electroencephalogram(EEG)based non-invasive brain computer interface(BCI)due to its characteristics of high accuracy and information transfer rate(ITR).To recognize the SSVEP components in collected EEG trials,a lot of recognition algorithms based on template matching of training trials have been proposed and applied in recent years.In this paper,a comparative survey of SSVEP recognition algorithms based on template matching of training trails has been done.Design/methodology/approach-To survey and compare the recently proposed recognition algorithms for SSVEP,this paper regarded the conventional canonical correlated analysis(CCA)as the baseline,and selected individual template CCA(ITCCA),multi-set CCA(MsetCCA),task related component analysis(TRCA),latent common source extraction(LCSE)and a sum of squared correlation(SSCOR)for comparison.Findings-For the horizontal comparative of the six surveyed recognition algorithms,this paper adopted the“Tsinghua JFPM-SSVEP”data set and compared the average recognition performance on such data set.The comparative contents including:recognition accuracy,ITR,correlated coefficient and R-square values under different time duration of the SSVEP stimulus presentation.Based on the optimal time duration of stimulus presentation,the author has also compared the efficiency of the six compared algorithms.To measure the influence of different parameters,the number of training trials,the number of electrodes and the usage of filter bank preprocessing were compared in the ablation study.Originality/value-Based on the comparative results,this paper analyzed the advantages and disadvantages of the six compared SSVEP recognition algorithms by considering application scenes,realtime and computational complexity.Finally,the author gives the algorithms selection range for the recognition of real-world online SSVEP-BCI.
基金funded by the National Natural Science Foundation of China under Grant Nos.41822106 and 42101447the Dawn Scholar of Shanghai Program under Grant No.18SG22+2 种基金the Science and Technology on Aerospace Flight Dynamics Laboratory,China,under Grant No.KGJ6142210110305State Key Laboratory of Disaster Reduction in Civil Engineering under Grant No.SLDRCE19-B-35Fundamental Research Funds for the Central Universities of China.
文摘A robust and eficient feature matching method is necessary for visual navigation in asteroid-landing missions.Based on the visual navigation framework and motion characteristics of asteroids,a robust and efficient template feature matching method is proposed to adapt to feature distortion and scale change cases for visual navigation of asteroids.The proposed method is primarily based on a motion-constrained discriminative correlation filter(DCF).The prior information provided by the motion constraints between sequence images is used to provide a predicted search region for template feature matching.Additionally,some specific template feature samples are generated using the motion constraints for correlation filter learning,which is beneficial for training a scale and feature distortion adaptive correlation filter for accurate feature matching.Moreover,average peak-to-correlation energy(APCE)and jointly consistent measurements(JCMs)were used to eliminate false matching.Images captured by the Touch And Go Camera System(TAGCAMS)of the Bennu asteroid were used to evaluate the performance of the proposed method.In particular,both the robustness and accuracy of region matching and template center matching are evaluated.The qualitative and quantitative results illustrate the advancement of the proposed method in adapting to feature distortions and large-scale changes during spacecraft landing.
基金supported by the National Natural Science Foundation of China,China(No.61801491)。
文摘Multi-modal image matching is crucial in aerospace applications because it can fully exploit the complementary and valuable information contained in the amount and diversity of remote sensing images.However,it remains a challenging task due to significant non-linear radiometric,geometric differences,and noise across different sensors.To improve the performance of heterologous image matching,this paper proposes a normalized self-similarity region descriptor to extract consistent structural information.We first construct the pointwise self-similarity region descriptor based on the Euclidean distance between adjacent image blocks to reflect the structural properties of multi-modal images.Then,a linear normalization approach is used to form Modality Independent Region Descriptor(MIRD),which can effectively distinguish structural features such as points,lines,corners,and flat between multi-modal images.To further improve the matching accuracy,the included angle cosine similarity metric is adopted to exploit the directional vector information of multi-dimensional feature descriptors.The experimental results show that the proposed MIRD has better matching accuracy and robustness for various multi-modal image matching than the state-of-the-art methods.MIRD can effectively extract consistent geometric structure features and suppress the influence of SAR speckle noise using non-local neighboring image blocks operation,effectively applied to various multi-modal image matching.
基金supported by the Electric Power Research Institute and also makes use of Engineering Research Center Shared Facilities supported by the DOE under U.S.NSF Award Number EEC1041877support is provided by the U.S.CURENT Industry Partnership Program and China National Government Building Highlevel University Graduate Programs([2012]3013).
文摘Understanding power system dynamics after an event occurs is essential for the purpose of online stability assessment and control applications.Wide area measurement systems(WAMS)based on synchrophasors make power system dynamics visible to system operators,delivering an accurate picture of overall operating conditions.However,in actual field implementations,some measurements can be inaccessible for various reasons,e.g.,most notably communication failure.To reconstruct these inaccessible measurements,in this paper,the radial basis function artificial neural network(RBF-ANN)is used to estimate the system dynamics.In order to find the best input features of the RBF-ANN model,geometric template matching(GeTeM)and quality-threshold(QT)clustering are employed from the time series analysis to compute the similarity of frequency dynamic responses in different locations of the power system.The proposed method is tested and verified on the Eastern Interconnection(EI)transmission system in the United States.The results obtained indicate that the proposed approach provides a compact and efficient RBF-ANN model that accurately estimates the inaccessible frequency dynamic responses under different operating conditions and with fewer inputs.
文摘The concept and advantage of reconfigurable technology is introduced. A kind of processor architecture of re configurable macro processor (RMP) model based on FPGA array and DSP is put forward and has been implemented. Two image algorithms are developed: template-based automatic target recognition and zone labeling. One is estimating for motion direction in the infrared image background, another is line picking-up algorithm based on image zone labeling and phase grouping technique. It is a kind of 'hardware' function that can be called by the DSP in high-level algorithm. It is also a kind of hardware algorithm of the DSP. The results of experiments show the reconfigurable computing technology based on RMP is an ideal accelerating means to deal with the high-speed image processing tasks. High real time performance is obtained in our two applications on RMP.
基金supported by the USTC Research Funds of the Double First-Class Initiative(Grant No.YD2080002006)the Special Fund of the Institute of Geophysics,China Earthquake Administration(Grant No.DQJB21Z05).
文摘Seismic data processing techniques,together with seismic instrumentation,determine our earthquake monitoring capability and the quality of resulting earthquake catalogs.This paper is intended to review the improvement of earthquake monitoring capability from the perspective of data processing.Over the past two decades,seismologists have made considerable advancements in seismic data processing,partly thanks to the significant development of computational power,signal processing,and machine learning techniques.In particular,wide application of template matching and increasing use of deep learning significantly enhance our capability to extract signals of small earthquakes from noisy data.Relative location techniques provide a critical tool to elucidate fault geometries and seismicity migration patterns at unprecedented resolution.These techniques are becoming standard,leading to emerging intelligent software systems for next-generation earthquake monitoring.Prospective improvements in future research must consider the urgent needs in highly generalizable detection algorithms(for both permanent and temporary deployments)and in emergency real-time monitoring of ongoing sequences(e.g.,aftershock and induced seismicity sequences).We believe that the maturing of intelligent and high-resolution processing systems could transform traditional earthquake monitoring workflows and eventually liberate seismologists from laborious catalog construction tasks.
文摘For the autonomous guided vehicle (AGV) used mainly in unfixed work fields, a machine vision method was proposed for the navigation system, in which a series of navigation-signs are placed along the travel route. The navigation system detects and recognizes these signs, and accordingly informs the travel control system. In order for the navigation to have balanced ability of 1) covering a large area and 2) recognizing details of the sign, the proposed vision method was designed to be a hybrid one, using both the stereo vision and the traditional 2D template matching. The former implemented a coarse recognition function for above 1), and the later implemented a fine recognition function for above 2). The results from the coarse recognition were used in the fine recognition for the gaze control to input suitable 2D image of the signs. Experiments on a prototype system show the feasibility of the proposed hybrid method in achieving the objective specifications for a typical AGV.