Amorphous Iridium Oxide-Integrated Anode Electrodes with Ultrahigh Material Utilization for Hydrogen Production at Industrial Current Densities

Herein,ionomer-free amorphous iridium oxide(IrO_(x))thin electrodes are first developed as highly active anodes for proton exchange membrane electrolyzer cells(PEMECs)via low-cost,environmentally friendly,and easily scalable electrodeposition at room temperature.Combined with a Nafion 117 membrane,the IrO_(x)-integrated electrode with an ultralow loading of 0.075 mg cm^(-2)delivers a high cell efficiency of about 90%,achieving more than 96%catalyst savings and 42-fold higher catalyst utilization compared to commercial catalyst-coated membrane(2 mg cm^(-2)).Additionally,the IrO_(x)electrode demonstrates superior performance,higher catalyst utilization and significantly simplified fabrication with easy scalability compared with the most previously reported anodes.Notably,the remarkable performance could be mainly due to the amorphous phase property,sufficient Ir^(3+)content,and rich surface hydroxide groups in catalysts.Overall,due to the high activity,high cell efficiency,an economical,greatly simplified and easily scalable fabrication process,and ultrahigh material utilization,the IrO_(x)electrode shows great potential to be applied in industry and accelerates the commercialization of PEMECs and renewable energy evolution.

Study and application on product design system orienting to optimal utilization of material resources

Product design plays a decisive role in material resource consumption in manufacturing systems. So it is significant to study optimal utilization of material resources of manufacturing system from the perspective of product design. This paper firstly defines concept of product design, then after an analysis of design objectives the author proposes a target system of product design with three subsystems: structural system, functional system, and technical system. Finally, a product design system on Architectural Metal Structure Enterprises is developed and used in light of the great consumption of material resources in Metal Structure Enterprises. The system has got an obvious effect on improving comprehensive optimal using rate of material resources of enterprises, reducing design cycle, improving management of enterprises.

Evaluation on Diseases Resistance of Cotton Material and Its Utilization

Fusarium wilt and Verticillium wilt are important worldwide fungal diseases on cotton that cause damage to yield and quality.The pathogens survive in soil as microsclerotia for many years,and

Review of the fabrication and application of porous materials from silicon-rich industrial solid waste

Porous materials have promise as sound insulation, heat barrier, vibration attenuation, and catalysts. Most industrial solid wastes, such as tailings, coal gangue, and fly ash are rich in silicon. Additionally, a high silicon content waste is a potential raw material for the syn- thesis of silicon-based, multi-porous materials such as zeolites, mesoporous silica, glass-ceramics, and geopolymer foams. Representative sil- icon-rich industrial solid wastes (SRISWs) are the focus of this mini review of the processing and application of porous silicon materials with respect to the physical and chemical properties of the SRISW. The transformation methods of preparing porous materials from SRISWs are summarized, and their research status in micro-, meso-, and macro-scale porous materials are described. Possible problems in the application of SRISWs and in the preparation of functional porous materials are analyzed, and their development prospects are discussed. This review should provide a typical reference for the recycling and use of industrial solid wastes to develop sustainable “green materials.”

Creating new middle breeding materials by utilizing new techniques

A new breeding program"Creating new middle breedingmaterials by utilizing new techniques",cooperated byChina National Rice Research Institute (CNRRI)andJapan International Research Center for Agricultural Sci-ence(JIRCAS)",started in Hangzhou,China in 1999.

Preparation of large-area isotopic magnesium targets for the 25Mg(p,γ)^26 Al experiment at JUNA

To study the 25Mg(p,y)^26 Al reaction at the Jinping Underground Nuclear Astrophysics laboratory,a large-area 25Mg target with a uniform thickness is needed.A rotating unit is used to ensure the uniformity of the target thickness during evaporation.After many attempts,19 targets with diameters of 40 mm and a non-uniformity of8.4%were prepared simultaneously.The rate of material utilization was approximately 4.7 times higher than that obtained using a conventional evaporation method.

On Designing Biopolymer-Bound Soil Composites (BSC) for Peak Compressive Strength

Biopolymer-bound Soil Composites(BSC),are a novel bio-based construction material class,produced through the mixture and desiccation of biopolymers with inorganic aggregates with applications in soil stabilization,brick creation and in situ construction on Earth and space.This paper introduces a mixture design methodology to produce maximum strength for a given soil-biopolymer combination.Twenty protein and sand mix designs were investigated,with varying amounts of biopolymer solution and compaction regimes during manufacture.The ultimate compressive strength,density,and shrinkage of BSC samples are reported.It is observed that the compressive strength of BSC materials increases proportional to tighter particle packing(soil dry bulk density)and binder content.A theory to explain this peak compressive strength phenomenon is presented.