Formation of Water Quality of Surface Water Bodies Used in the Material Processing

In the process of production or processing of materials by various methods,there is a need for a large volume of water of the required quality.Today in many regions of the world,there is an acute problem of providing industry with water of a required quality.Its solution is an urgent and difficult task.The water quality of surface water bodies is formed by a combination of a large number of both natural and anthropogenic factors,and is often significantly heterogeneous not only in the water area,but also in depth.As a rule,the water supply of large industrial enterprises is located along the river network.Mergers are the most important nodes of river systems.Understanding the mechanism of transport of pollutants at the confluence of rivers is critical for assessing water quality.In recent years,thanks to the data of satellite images,the interest of researchers in the phenomenon of mixing the waters of merging rivers has increased.The nature of the merger is influenced by the formation of transverse circulation.Within the framework of this work,a study of vorticity,as well as the width of the mixing zone,depending on the distance from the confluence,the speeds of the merging rivers and the angle of confluence was carried out.Since the consumer properties of water are largely determined by its chemical and physical indicators,the intensity of mixing,determined largely by the nature of the secondary circulation,is of fundamental importance for assessing the distribution of hydrochemical indicators of water quality in the mixing zone.These characteristics are important not only for organizing water intake for drinking and technical purposes with the best consumer properties,but also for organizing an effective monitoring system for confluence zones.

Effect of mechanical anisotropy on material removal rate and surface quality during polishing CdZnTe wafers

The mechanical characters of CdZnTe crystal were investigated by nanoscratch tests, and the effects of mechanical anisotropy on the material removal rate and surface quality were studied by polishing tests. There is a peak of frictional coefficient at the early stage of scratch, and increasing the vertical force will result in the increase of peak value correspondingly. The fluctuation phenomenon of frictional coefficient is generated at high vertical force. The lateral forces show the apparent twofold and threefold symmetries on （110） and （111） planes, respectively. To obtain high surface quality, low polishing pressure and hard direction （〈 T10 〉 directions on （110） plane and 〈 112 〉 directions on （111） plane） should be selected, and to achieve high material removal rate, high polishing pressure and soft direction （〈001〉 directions on （110） plane and 〈 121 〉 directions on （111） plane） should be selected.

Hydration mechanism of low quality fly ash in cement-based materials

The hydration mechanism of low quality fly ash in cement-based materials was investigated. The hydration heat of the composite cementitious materials was determined by isothermal calorimetry, and the hydration products, quantity, pore structure and morphology were measured by X-ray diffraction(XRD), thermalgravity-differential thermal analysis(TG-DTA), mercury intrusion porosimetry(MIP) and scanning electron microscopy(SEM), respectively. The results indicate that grinding could not only improve the physical properties of the low quality fly ash on particle effect, but also improve hydration properties of the cementitious system from various aspects compared with raw low quality fly ash(RLFA). At the early stage of hydration, the low quanlity fly ash acts as almost inert material; but then at the later stage, high chemical activity, especially for ground low quality fly ash(GLFA), could be observed. It can accelerate the formation of hydration products containing more chemical bonded water, resulting in higher degree of cement hydration, thus denser microstructure and more reasonable pore size distribution, but the hydration heat in total is reduced. It can also delay the induction period, but the accelerating period is shortened and there is little influence on the second exothermic peak.

Effects of Functional Organic Materials on Morphological Indexes,Quality and Yield of Watermelon

[Objectives]This study was conducted to explore suitable organic compound application models for watermelon growth.[Methods]With watermelon hybrid material"M22×P18"as the test material,the effects of four functional organic materials,namely garlic straw treatment(T_(1)),onion straw treatment(T_(2)),garlic straw+sheep manure treatment(T_(3))and onion straw+chicken manure treatment(T_(4)),on the morphological indexes,yield and quality of watermelon were investigated.[Results]Different functional organic materials had different effects on morphological indexes,yield and quality of watermelon.The morphological indexes,nutritional quality indexes and yield of watermelon treated with garlic straw and sheep manure compound(T_(3))and onion straw and chicken manure compound(T_(4))were significantly higher than those treated simply with garlic straw(T_(1))and onion straw(T_(2)),and T_(3)performed relatively better.Compared with treatment T_(2),T_(3)showed a stem diameter,vine length and leaf number increasing by 43.05%,46.69%and 40.77%respectively,central sugar and side sugar contents increasing by 11.72%and 21.90%respectively,and a yield increasing by 42.91%,with significant differences from T_(2).[Conclusions]This study provides technical support for high-quality and high-yielding cultivation of watermelon.

Effects of Functional Organic Materials on Fresh Weight,Quality,Single-melon Weight and SPAD Value of Watermelon

[Objectives]This study was conducted to explore a functional organic material formula suitable for watermelon cultivation with high quality,high yield and high efficiency.[Methods]Four treatments were set in the experiment,namely four functional organic materials,garlic straw treatment(T_(1)),onion straw treatment(T_(2)),garlic straw+sheep manure treatment(T_(3))and onion straw+chicken manure treatment(T_(4)),to investigate the effects of different functional organic materials on fresh weight,quality,single-melon weight and SPAD value of watermelon.[Results]The effects of different functional organic materials on fresh weight,quality,single-melon weight and SPAD value of watermelon were quite different.The fresh weight,quality,single-melon weight and SPAD value of watermelon were higher in treatment T_(3)applying garlic straw and sheep manure and treatment T_(4)applying onion straw and chicken manure than in treatment T_(1)applying garlic straw and treatment T_(2)applying onion straw.Specifically,the fresh weight of whole plant was the highest in treatment T_(3),followed by treatment T_(4),and the values of the two treatments increased by 12.83%and 5.94%respectively compared with treatment T_(1);the weight of single melon was the highest in treatment T_(3),followed by treatment T_(4),and the values of the two treatments increased by 42.45%and 31.77%respectively compared with treatment T_(2);and the SPAD values of treatments T_(3)and T_(4)were significantly higher than those of treatments T_(1)and T_(2),and the value of treatment T_(3)was the largest.[Conclusions]This study provides theoretical support for the popularization and application of fertilization techniques combining organic fertilizers and reduced chemical fertilizers for watermelon.

GMA material design and construction quality control for asphalt pavement of steel box girder: Case study of the Hong Kong–Zhuhai–Macao Bridge

To improve the quality of the Hong Kong–Zhuhai–Macao Bridge paving project,a new paving layer material,Guss-mastic asphalt(GMA),was proposed in this paper by combining the advantages of two types of cast asphalt mixtures:mastic asphalt(MA)and Guss asphalt(GA).Based on the characteristics of GMA,to simulate its actual production process,this study developed a small-simulated cooker mixing equipment.Moreover,the flow degree,60C dynamic stability,and impact toughness were proposed to be used to evaluate the construction and ease,high temperature stability,and fatigue resistance of GMA cast asphalt mixtures,respectively.Moreover,the quality control standards for GMA paving materials by indoor tests,field trial mix GMA material performance tests,and accelerated loading tests were finalized.The study showed that the developed simulated cooker yielded consistent mixing results in the same working environment as the engineering cooker device.Increasing the coarse aggregate incorporation rate,coarsening the mastic epure(ME)gradation composition,and using a smaller oil to stone ratio can reduce the flowability of the GMA materials to varying degrees.The four-point bending fatigue life and impact toughness of the different GMA materials are correlated well.A mobility of<20 s,60C dynamic stability of 400–800 times/mm,15C impact toughness of400 N⋅mm,and cooker car mixing temperature control standard of 210C–230C form an appropriate control index system for the design and production of GMA cast asphalt mixtures.Simultaneously,accelerated loading tests verified the accuracy and reliability of the quality control index system that has been used in the GMA paving project of the Hong Kong–Zhuhai–Macao Bridge deck and has achieved good application results.

Risk Analysis and Quality Control of Cosmetic Raw Materials

The present situation of cosmetic raw materials has been introduced,mainly including the measures of risk analysis and quality control for cosmetic raw materials.Through the inspection of cosmetic raw materials,the formulation design and development,and the incoming management,the departments in the enterprise have worked together to achieve the risk analysis and quality control of cosmetic raw materials,to ensure the quality and safety of cosmetics.

The Use of Self-cleaning Materials and Study Their Impact on the Quality of the Visual Appearance of Large Industrial Cities

One of the capabilities of the architecture is to respond to growing and,in some cases,varied needs of users.However,architecture and construction industry,in comparison with other sciences,have been very slow and inadequate to implement this technology despite very suitable ground for improvement.At the moment,one of the most essential discussions in this field is how to achieve qualitative understanding of construction materials.Accordingly,one of the key sections of a construction which plays a significant role in optimizing performance is shell of the building.In this article,in addition to the utilization technique of selfcleaning materials in construction industry which will result in embellishment of urban design,an attempt has also been made to present a suitable model on how to utilize these materials in order to improve the visual appearance quality of megalopolises.The technology of self-cleaning surfaces in order to increase durability and reduce costs and required time for equipment maintenance has currently become the focal point in construction industry.Now providing one answer to the question of whether will selfcleaning,purifying facades change the future of urban architecture?The main panorama of this research is to find and establish a dynamic and sustainable balance in embellishment of urban design.The necessity of research in this field as well as finding the best and most practical solution seem.To achieve all this,an analytical and descriptive research has been utilized,data has been collected by various books and national and international websites.

Use of Affordable Materials to Improve Water Quality in Peri-Urban Settlements in Windhoek, Namibia

Water samples from Daan Viljoen dam, Avis dam and Goreangab dam were collected and filtered with burlap, cotton and polyester. The water samples were analyzed for the presence of total coliform, Escherichia coli, heterotrophic plate count (HPC), somatic coliphage, Clostridium perfringens, turbidity and conductivity. The bacteriological analysis was carried out by membrane filtration and pour plate techniques. The water from the three dams was found to contain high levels of microorganisms which indicated that it was not safe for human consumption. Turbidity was improved after filtration. Cotton filtered out the most microorganisms (p < 0.05) in all dams compared with the other two types of cloths.

Evaluation of physicochemical properties as supporting information on quality control of raw materials and veterinary pharmaceutical formulations

This study aimed to show that the physicochemical proprieties obtained by Fourier transform infrared spectroscopy （FTIR）, thermogravimetry （TG）, and scanning electronic microscopy （SEM） can be useful tools for evaluating the quality of active pharmaceutical ingredients （APIs） and pharmaceutical products. In addition, a simple, sensitive, and efficient method employing HPLC-DAD was developed for simulta- neous determination of lidocaine （LID）, ciprofloxacin （CFX） and enrofloxacin （EFX） in raw materials and in veterinary pharmaceutical formulations. Compounds were separated using a Gemini Cm （250 mm×4.6 mm, 5μm） Phenomenex column, at a temperature of 25℃, with a mobile phase containing 10 mM of phosphoric acid （pH 3.29）： acetonitrile （85.7：14.3, v/v） and a flow rate of 1.5 mL/min. Physicochemical characterization by TG, FTIR, and SEM of raw materials of LID, CFX, and EFX provided information useful for the evaluation, differentiation, and qualification of raw materials. Finally, the HPLC method was proved to be useful for evaluation of raw material and finished products, besides satisfying the need for an analytical method that allows simultaneous determination of EFX, CFX, and LID, which can also be extended to other matrices and applications.

Research Progress of Soil Factors Affecting the Quality of Chinese Medicinal Materials

The paper summarized the effects of soil on the quality of Chinese medicinal materials from the aspects of physical,chemical and biological properties of soil,in order to provide a reference for further research on the internal relationship between soil factors and the quality of Chinese medicinal materials,and to provide a theoretical basis for the cultivation and quality improvement of Chinese medicinal materials.

Study on Quality Control of Concrete Raw Materials in Road and Bridge Construction

The main material of concrete is a construction building material composed of water and mineral mixture and cement and chemical additives in the corresponding proportion and below the standard.In the process of making concrete material,slurry and cement are needed to mix,then cement slurry and sand are mixed into mortar according to the corresponding proportion,and aggregate is added to mortar to form concrete building material.In the process of concrete preparation,the most important construction link is mixing,which needs to be fully stirred to make the performance of concrete meet the construction needs.In the process of concrete construction technology development,both mix ratio and production technology have become more and more mature,but there are still some problems,which have an impact on the quality of concrete[1].Therefore,this paper discusses the quality control of concrete raw materials according to the construction process of road and bridge.

Effect of Different Mulch Materials on Yield and Nutrition Profile of Common Capsicum (Capsicum annuum) Cultivars in Bangladesh

Capsicum is a nutritious vegetable and its cultivation in farms is getting popular in Bangladesh. Although many efforts have lain to explore better yielding and nutritionally rich cultivars with suitable modern cultivation techniques but still have to find the desired outcome. Thus, it’s necessary to conduct further research to identify the high-yielding and nutritious capsicum cultivars in Bangladesh. An experiment was conducted from July 2021 to June 2022 at the Bangladesh Institute of Research and Training on Applied Nutrition (BIRTAN) research field with three cultivars of capsicum: B0 = California Wonder, B1 = BARI Misti Morich-1 and B2 = BARI Misti Morich-2 and three mulching: T0 = No mulching, T1 = Water hyacinth, T2 = Poly Mulching in randomized complete block design with three replications to identify better quality capsicum cultivar and suitable mulching material. Among cultivars the BARI Misti Morich-2 (B2) showed increased agronomic parameters like number of branches and effective branches per plant, leaves length and width, consequently yield and yield contributing traits were also enhanced like fruits per plant, fruit length, fruit diameter and yield per plant (25.97%, 4.54%, 3.64% and 21.43%, respectively). Poly Mulching (T2) increased agronomic traits, yield traits and yield (0.61 kg) than BARI Misti Morich-1 (T1). The combined effect of B2T2 increased the number of branches per plant, effective branches per plant, leaves length and breadth by 40%, 90%, 15.57% and 26.22%, respectively, hence resulting in an increased yield of 20%. BARI Misti Morich-2 cultivar showed an increase in Fe, Zn and Vitamin-C content of 26.24% and 23.10%, 8.82% and 5.14%, and 6.03% and 5.74% than B0 and B1 cultivars, respectively. Therefore, BARI Misti Morich-2 exhibited the improved agronomic, yield and nutritional traits of capsicum under poly mulching among other cultivars in Bangladesh.

Atmospheric Pollutants in a Commercial Region of Fortaleza, Ceará, Brazil: Integration of Health, Environment and Economy in Urban Planning to Improve Air Quality

The accelerated growth of the vehicular fleet, the modernization of large urban centers, and the few adjustments to the road network in Fortaleza have intensified the problems of traffic and emissions of atmospheric pollutants, highlighting the necessity for strategic urban planning initiatives to address the escalating issues of traffic and pollution. With the objective of analyzing the indices of concentrations of atmospheric pollutants and estimating how these levels can affect human health, this work consists of a study of the analysis of air quality in the intense trade region of Fortaleza. For this, the analysis zone was divided into three perimeters (Major - Medium - Minor), where each perimeter was analyzed at 7 am, 12 noon and 5 pm. Concentrations of the type of O3, particulate matter (PM2.5 and PM10), CO2 and HCHO were collected. Our results demonstrate that most of the analyses are within the limits of current legislation;however, at certain times and perimeters, the analyses of CO2 and HCHO exceeded the established limits. In view of the above, we conclude that public policies to control air quality are necessary to reduce the damage to human health and the environment caused by pollutants.

Quality Improvement of Granular Wastes-The Effective Way to Recycle Secondary Raw Building Materials

Granular wastes have negative effects on the environment due to contamination. On the other hand, stony components in granular wastes have a potential good perspectives for utilization in civil engineering works as secondary raw building materials. To reuse such materials without environmental risks, all contaminants must be removed or reduced to an acceptable level. Therefore liberation of materials is an important step in waste treatment. For this purpose, separation and cleansing techniques are suitable. Based on the analysis of contaminants in wastes, it is discussed how to select suitable techniques. The rules for technique selection and processes for quality improvement are set up. To evaluate the environmental quality and technical quality of output products, it is necessary to check leaching behaviours and physical properties.

Application of Equilibrium Partitioning Approach to the Derivation of Sediment Quality Guidelines for Metals in Dianchi Lake

For the past 20 years, numerous studies have been carried out on the application of equilibrium partitioning approach （EqPA） for the derivation of sediment quality guidelines （SQGs）. However, for metals, few Equilibrium-partitioning- based numerical SQGs have been developed or are currently available because of the confounding factors mediating the bioavailability of metals. A study was conducted at Dianchi Lake, which is a heavily eutrophicated lake on the Yunnan- Guizhou Plateau, China with the focus on the measurement of partitioning coefficient （Kp） and SQGs derivation and normalization to acid volatile sulfide （AVS）, fine material, and organic carbon. Using new normalization methods, SQGs were formulated for seven metals including copper, zinc, lead, cadmium, chromium, mercury, and arsenic in Dianchi Lake. In Dianchi Lake sediments, the fine material contributed 25.4%-36.0% to the SQG values, with the largest contribution to the SQG value of mercury; AVS contributed 2.9%-75.0% to the SQG values, with the largest contribution to the SQG value of cadmium. This indicated that the fine material and the AVS were the most important controlling factors to the bioavailability of mercury and caximium, respectively. The contribution of total organic carbon （TOC） to the SQG values of copper and leaxi was 3.8% and 7.1%, respectively, indicating that at relatively lower concentrations, the contribution of TOC was not significant. In addition to normalization methods, appropriate procedures for the application of EqPA including sample collection, storage, and analysis are also essential to improve the reliability of SQGs. The normalized Dianchi Lake SQGs were higher than most of the empirically based SQGs developed in North America, but lower than Hong Kong interim SQGs except for cadmium and arsenic. The differences could be attributed to the approaches used for derivation of SQGs and the water quality criteria adopted and the differences in the physical and chemical characteristics of the sediments.

Ultrastable and ultrasensitive pH-switchable carbon dots with high quantum yield for water quality identification,glucose detection,and two starch-based solid-state fluorescence materials

It is attractive and encouraging to develop new fluorescent carbon dots(CDs)with excellent optical properties and promising applications prospects.Herein,highly-efficient green emissive CDs(m-CDs)with a high quantum yield(QY)of 71.7%in water are prepared through a facile solvothermal method.Interestingly,the m-CDs exhibit excellent fluorescence stability in the pH range of 1–9.However,the fluorescence intensity of the m-CDs is almost completely quenched as the pH is increased from 9 to 10.The mechanism of the unique pH-responsive behavior is discussed in detail and a plausible mechanism is proposed.Owing to the unique pH-responsive behavior,the m-CDs are used as a on-off fluorescent probe for water quality identification.By combining the reversible pH-ultrasensitive optical properties of the m-CDs in the pH range of 9–10 with the glucose oxidase-mimicking(GOx-mimicking)ability of Au nanoparticles(AuNPs),glucose can be quantitatively detected.Finally,two environment-friendly starch-based solid-state fluorescence materials(powder and film)are developed through green preparation routes.

A comparison of different methods for preserving plant molecular materials and the effect of degraded DNA on ddRAD sequencing

Obtaining high-quality plant materials for experiments is challenging for many research projects.Therefore, it is of special importance to determine the best method for preserving biological macromolecules like DNA, which degrade over time. Although some research has demonstrated that DNA degradation has little effect on traditional molecular markers, the effects of DNA degradation on dd RADseq, a popular reduced-representation sequencing technology, have not been adequately investigated. In this study, we first chose six woody bamboo species(Bambusoideae, Poaceae) to explore appropriate methods for preserving molecular materials with two DNA extraction approaches. Then we sequenced twenty-one bamboos and examined the effects of DNA quality on data generation using the dd RAD-seq technique(Midd RAD-seq). Finally, we reconstructed phylogenies of twenty woody bamboo species. We found that the integrity of dry-powdered DNA was preserved longer than that of TE-dissolved DNA,regardless of whether the DNA was extracted by a modified CTAB protocol or DNAsecure plant kit. The dd RAD-seq data were robust, except when DNA was severely degraded. In addition, we resolved the phylogenetic positions of the sampled Phyllostachys spp. Our results suggest that dry-powdered DNA is the most appropriate preservation method for plant molecular materials. Furthermore, a moderate level of DNA degradation has little effect on reduced representation sequencing techniques represented by dd RAD-seq.

Intellectual Property Protection and High Quality Development of Radix Glycyrrhizae for Treatment of COVID-19

Radix Glycyrrhizae is the dominant native medicinal material variety in the north and northwestern medicinal materials producing areas.It is a main Chinese medicine of effective TCM drugs and formulas for the treatment of new coronavirus disease(COVID-19).This paper introduces the medicinal value of Radix Glycyrrhizae,involving the labeling,cultural heritage,and creative intellectual property rights of the Chinese medicinal materials,analyzes the poverty-stricken areas that are ecologically suitable for Radix Glycyrrhizae cultivation,and the superior counties and production bases of the Chinese medicinal materials.Besides,mainly from the aspects of perfect intellectual property rights,the establishment of authentic medicinal material production bases,and the construction of quality control systems,etc.,it discusses the rural revitalization strategy and the development strategy of traditional Chinese medicine(TCM),agricultural intellectual property protection and high-quality development strategy of Radix Glycyrrhizae.

Application of Factor Analysis in Sensory Evaluation of Tobacco Raw Materials

[ Objective] This study aimed to analyze the main sensory quality indexes of reconstituted tobacco materials. [ Method ] The factor analysis was per- formed to analyze sensory quality of reconstituted tobacco raw materials. [ Result] The results showed that the contribution rate was 87. 791% and four factors were obtained via factor analysis. The factor loading of factor 1 （ aroma quality, aroma amount, offensive odor, after-taste） was relatively large. Factor 2 was the exterior factor. Factor 3 was momentum factor. Factor 4 was the concentration factor. The comprehensive scores of samples from different regions demonstrated a descending order of Hubei, Yuxi, Chuxiong, Honghe, Dali, Kunming, Hunan, Henan, Fujian, Qujing, Baoshan, Guizhou, Zhaotong, Chongqing, Puer, Wenshan, Guang- dong, and Jiangxi. [ Conclusion] The factor analysis results provided a theoretical basis for subsequent sensory evaluation of reconstituted tobacco.