Application of Artificial Neural Networks Based Monte Carlo Simulation in the Expert System Design and Control of Crude Oil Distillation Column of a Nigerian Refinery

This research work investigated comparative studies of expert system design and control of crude oil distillation column (CODC) using artificial neural networks based Monte Carlo (ANNBMC) simulation of random processes and artificial neural networks (ANN) model which were validated using experimental data obtained from functioning crude oil distillation column of Port-Harcourt Refinery, Nigeria by MATLAB computer program. Ninety percent (90%) of the experimental data sets were used for training while ten percent (10%) were used for testing the networks. The maximum relative errors between the experimental and calculated data obtained from the output variables of the neural network for CODC design were 1.98 error % and 0.57 error % when ANN only and ANNBMC were used respectively while their respective values for the maximum relative error were 0.346 error % and 0.124 error % when they were used for the controller prediction. Larger number of iteration steps of below 2500 and 5000 were required to achieve convergence of less than 10-7?for the training error using ANNBMC for both the design of the CODC and controller respectively while less than 400 and 700 iteration steps were needed to achieve convergence of 10-4?using ANN only. The linear regression analysis performed revealed the minimum and maximum prediction accuracies to be 80.65% and 98.79%;and 98.38% and 99.98% when ANN and ANNBMC were used for the CODC design respectively. Also, the minimum and maximum prediction accuracies were 92.83% and 99.34%;and 98.89% and 99.71% when ANN and ANNBMC were used for the CODC controller respectively as both methodologies have excellent predictions. Hence, artificial neural networks based Monte Carlo simulation is an effective and better tool for the design and control of crude oil distillation column.

Artificial Neural Network and Full Factorial Design Assisted AT-MRAM on Fe Oxides, Organic Materials, and Fe/Mn Oxides in Surficial Sediments

Artificial neural network（ANN） and full factorial design assisted atrazine（AT） multiple regression adsorption model（AT-MRAM） were developed to analyze the adsorption capability of the main components in the surficial sediments（SSs）. Artificial neural network was used to build a model（the determination coefficient square r2 is 0.9977） to describe the process of atrazine adsorption onto SSs, and then to predict responses of the full factorial design. Based on the results of the full factorial design, the interactions of the main components in SSs on AT adsorption were investigated through the analysis of variance（ANOVA）, F-test and t-test. The adsorption capability of the main components in SSs for AT was calculated via a multiple regression adsorption model（MRAM）. The results show that the greatest contribution to the adsorption of AT on a molar basis was attributed to Fe/Mn（–1.993 μmol/mol）. Organic materials（OMs） and Fe oxides in SSs are the important adsorption sites for AT, and the adsorption capabilities are 1.944 and 0.418 μmol/mol, respectively. The interaction among the non-residual components（Fe, Mn oxides and OMs） in SSs interferes in the adsorption of AT that shouldn’t be neglected, revealing the significant contribution of the interaction among non-residual components to controlling the behavior of AT in aquatic environments.

ARTIFICIAL NEURAL NETWORKS BASED GEARS MATERIAL SELECTION HYBRID INTELLIGENT SYSTEM

An artificial neural networks(ANNs) based gear material selection hybrid intelligent system is established by analyzing the individual advantages and weakness of expert system (ES) and ANNs and the applications in material select of them. The system mainly consists of tow parts: ES and ANNs. By being trained with much data samples, the back propagation (BP) ANN gets the knowledge of gear materials selection, and is able to inference according to user input. The system realizes the complementing of ANNs and ES. Using this system, engineers without materials selection experience can conveniently deal with gear materials selection.

The Development of Highly Loaded Turbine Rotating Blades by Using 3D Optimization Design Method of Turbomachinery Blades Based on Artificial Neural Network & Genetic Algorithm

In order to improve turbine internal efficiency and lower manufacturing cost, a new highly loaded rotating blade has been developed. The 3D optimization design method based on artificial neural network and genetic algorithm is adopted to construct the blade shape. The blade is stacked by the center of gravity in radial direction with five sections. For each blade section, independent suction and pressure sides are constructed from the camber line using Bezier curves. Three-dimensional flow analysis is carried out to verify the performance of the new blade. It is found that the new blade has improved the blade performance by 0.5%. Consequently, it is verified that the new blade is effective to improve the turbine internal efficiency and to lower the turbine weight and manufacturing cost by reducing the blade number by about 15%.

Artificial neural network based inverse design method for circular sliding slopes

Current design method for circular sliding slopes is not so reasonable that it often results in slope (sliding.) As a result, artificial neural network (ANN) is used to establish an artificial neural network based inverse design method for circular sliding slopes. A sample set containing 21 successful circular sliding slopes excavated in the past is used to train the network. A test sample of 3 successful circular sliding slopes excavated in the past is used to test the trained network. The test results show that the ANN based inverse design method is valid and can be applied to the design of circular sliding slopes.

Artificial Neural Network Method Based on Expert Knowledge and Its Application to Quantitative Identification of Potential Seismic Sources

In this paper,an approach is developed to optimize the quality of the training samples in the conventional Artificial Neural Network(ANN)by incorporating expert knowledge in the means of constructing expert-rule samples from rules in an expert system,and through training by using these samples,an ANN based on expert-knowledge is further developed.The method is introduced into the field of quantitative identification of potential seismic sources on the basis of the rules in an expert system.Then it is applied to the quantitative identification of the potential seismic sources in Beijing and its adjacent area.The result indicates that the expert rule based on ANN method can well incorporate and represent the expert knowledge in the rules in an expert system,and the quality of the samples and the efficiency of training and the accuracy of the result are optimized.

Design and Application of an Expert System for Equipment Maintenance and Forecast

The maintenance and forecast expert system of equipment based on Artificial Neural Network is composed of control, measure, failure forecast, execution, data processing module and database. The data processing module obtains the change of the controlled objects＇ structure and parameters, then takes correspondent measures according to the examination and diagnosis information. The failure forecast module finds the control system fault, separates the fault symptom location, tells the fault kind, estimates the magnitude and time of the fault, and finally makes evaluation and decision.

Learning material law from displacement fields by artificial neural network

The recently developed data-driven approach can establish the material law for nonlinear elastic composite materials(especially newly developed materials)by the generated stress-strain data under different loading paths(Computational Mechanics,2019).Generally,the displacement(or strain)fields can be obtained relatively easier using digital image correlation(DIC)technique experimentally,but the stress field is hard to be measured.This situation limits the applicability of the proposed data-driven approach.In this paper,a method based on artificial neural network(ANN)to identify stress fields and further obtain the material law of nonlinear elastic materials is presented,which can make the proposed data-driven approach more practical.A numerical example is given to prove the validity of the method.The limitations of the proposed approach are also discussed.

Prediction of mechanical property of E4303 electrode using artificial neural network

Based on the method of artificial neural network, a new approach has been devised to predict the mechanical property of E4303 electrode. The outlined predication model for determining the mechanical property of electrode was built upon the production data. The research leverages a back propagation algorithm as the neural network’s learning rule. The result indicates that there are positive correlations between the predicted results and the practical production data. Hence, using the neural network, predication of electrode property can be realized. For the first time, this research provides a more scientific method for designing electrode.

Prediction of column failure modes based on artificial neural network

To implement the performance-based seismic design of engineered structures,the failure modes of members must be classified.The classification method of column failure modes is analyzed using data from the Pacific Earthquake Engineering Research Center(PEER).The main factors affecting failure modes of columns include the hoop ratios,longitudinal reinforcement ratios,ratios of transverse reinforcement spacing to section depth,aspect ratios,axial compression ratios,and flexure-shear ratios.This study proposes a data-driven prediction model based on an artificial neural network(ANN)to identify the column failure modes.In this study,111 groups of data are used,out of which 89 are used as training data and 22 are used as test data,and the ANN prediction model of failure modes is developed.The results show that the proposed method based on ANN is superior to traditional methods in identifying the column failure modes.

Recycling Strategy and Recyclability Assessment Model Based on the Artificial Neural Network

Now, a rapidly growing concern for the environmental protection and resource utilization has stimulated many new activities in the in dustrialized world for coping with urgent environmental problems created by the steadily increasing consumption of industrial products. Increasingly stringent r egulations and widely expressed public concern for the environment highlight the importance of disposing solid waste generated from industrial and consumable pr oducts. How to efficiently recycle and tackle this problem has been a very impo rtant issue over the world. Designing products for recyclability is driven by environmental and economic goals. To obtain good recyclability, two measures can be adopted. One is better recycling strategy and technology; the other is design for recycling (DFR). The recycling strategies of products generally inclu de: reuse, service, remanufacturing, recycling of production scraps during the p roduct usage, recycle (separation first) and disposal. Recyclability assessment is a very important content in DFR. This paper first discusses the content of D FR and strategies and types related to products recyclability, and points out th at easy or difficult recyclability depends on the design phase. Then method and procedure of recyclability assessment based on ANN is explored in detail. The pr ocess consists of selection of the ANN input and output parameters, control of t he sample quality and construction and training of the neural network. At la st, the case study shows this method is simple and operative.

Seismic Health Monitoring of Foundations Using Artificial Neural Networks

Damage identification plays an important role in structural health monitoring systems. Despite variety in damage identification methods, little attention has been paid to the seismic damage identification of foundations. When shear walls serve as the lateral load resistance system of structures, foundations may subject to the high level of concentrated moment and shear forces. Consequently, they can experience severe damage. Since such damage is often internal and not visible, visual inspections cannot identify the location and the severity of damage. Therefore, a robust method is required for damage localization and quantification of foundations. According to the concept of performance-based seismic design of structures, the seismic behavior of foundations is considered as Force-Controlled. Therefore, for damage identification of foundation, internal forces should be estimated during ground motions. In this study, for real-time seismic damage detection of foundations, a method based on artificial neural networks was proposed. A feed-forward multilayer neural network with one hidden layer was selected to map input samples to output parameters. The lateral displacements of stories were considered as the input parameters of the neural network while moment and shear force demands at critical points of foundations were taken into account as the output parameters. In order to prepare well-distributed data sets for training the neural network, several nonlinear time history analyses were carried out. The proposed method was tested on the foundation of a five-story concrete shear wall building. The obtained results revealed that the proposed method was successfully estimated moment and shear force demands at the critical points of the foundation.

Material Removal Rate Prediction of Electrical Discharge Machining Process Using Artificial Neural Network

This article presents an Artificial Neural Network （ANN） architecture to model the Electrical Discharge Machining （EDM） process. It is aimed to develop the ANN model using an input-output pattern of raw data collected from an experimental of EDM process, whereas several research objectives have been outlined such as experimenting machining material for selected gap current, identifying machining parameters for ANN variables and selecting appropriate size of data selection. The experimental data （input variables） of copper-electrode and steel-workpiece is based on a selected gap current where pulse on time, pulse off time and sparking frequency have been chosen at optimum value of Material Removal Rate （MRR）. In this paper, the result has significantly demonstrated that the ANN model is capable of predicting the MRR with low percentage prediction error when compared with the experimental result.

Product Assembly Cost Estimation Based on Artificial Neural Networks

This paper proposes a method for assembly cost estimation in actual manufacture during the design phase using artificial neural networks(ANN). It can support the designers in cost effectiveness, then help to control the total cost. The method was used in the assembly cost estimation of the crucial parts of some railway stock products. As a comparison, we use the linear regression (LR) model in the same field. The result shows that ANN model performs better than the LR model in assembly cost estimation.

Comparison of Response Surface Methodology and Artificial Neural Network in Predicting the Microwave-Assisted Extraction Procedure to Determine Zinc in Fish Muscles

In this paper, the estimation capacities of the response surface methodology (RSM) and artificial neural network (ANN), in a microwave-assisted extraction method to determine the amount of zinc in fish samples were investigated. The experiments were carried out based on a 3-level, 4-variable Box–Behnken design. The amount of zinc was considered as a function of four independent variables, namely irradiation power, irradiation time, nitric acid concentration, and temperature. The RSM results showed the quadratic polynomial model can be used to describe the relationship between the various factors and the response. Using the ANN analysis, the optimal configuration of the ANN model was found to be 4-10-1. After predicting the model using RSM and ANN, two methodologies were then compared for their predictive capabilities. The results showed that the ANN model is much more accurate in prediction as compared to the RSM.

Investigation of Optimal Megnetic Properties in NdFeB Magnets by Artificial Neural Network

In order to study the effect of alloy component on magnetic properties of NdFeB magnets, the experiment schemes are carried out by the uniform design theory, and the relationship between the component and the magnetic properties is established by artificial neural network(ANN) predicting model.The element contents of alloys are optimized by the ANN model.Meanwhile, the influences of mono-factor or multi-factor interaction on alloy magnetic properties are respectively discussed according to the curves ploted by ANN model.Simulation result shows that the predicted and measured results are in good agreement.The relative error is every low, the error is not more than 1.68% for remanence Br, 1.56% for maximal energy product (BH)m, and 7.73% for coercivity Hcj.Hcj can be obviously improved and Br can be reduced by increasing Nd or Zr content.Co and B have advantageous effects on increasing Br and disadvantageous effects on increasing Hcj.Influence of alloying elements on Hcj and Br are inverse, and the interaction among the alloying elements play an important role in the magnetic properties of NdFeB magnets.The ANN prediction model presents a new approach to investigate the nonlinear relationship between the component and the magnetic properties of NdFeB alloys.

An Expert System for the Prediction of Surface Finish in Turning Process

Prediction of surface finish in turning process is a difficult but important task. Artificial Neural Networks (ANN) can reliably pred ict the surface finish but require a lot of training data. To overcome this prob lem, an expert system approach is proposed, wherein it will be possible to predi ct the surface finish from limited experiments. The expert system contains a kno wledge base prepared from machining data handbooks and number of experiments con ducted by turning steel rods, over a wide range of cutting parameters. With this knowledge base, the expert system predicts surface finish for different tool-w ork-piece combinations, by carrying out few experiments for each case. The prop osed expert system model is validated by carrying out a number of experiments.

Study on Missile Intelligent Fault Diagnosis System Based on Fuzzy NN Expert System

In order to study intelligent fault diagnosis methods based on fuzzy neural network (NN) expert system and build up intelligent fault diagnosis for a type of missile weapon system, the concrete implementation of a fuzzy NN fault diagnosis expert system is given in this paper. Based on thorough research of knowledge presentation, the intelligent fault diagnosis system is implemented with artificial intelligence for a large-scale missile weapon equipment. The method is an effective way to perform fuzzy fault diagnosis. Moreover, it provides a new way of the fault diagnosis for large-scale missile weapon equipment.

MOLTEN SALT PHASE DIAGRAMS CALCULATION USING ARTIFICIAL NEURAL NETWORK OR PATTERN RECOGNITION-BOND PARAMETERS PART 3.ESTIMATION OF LIQUIDUS TEMPERATURE AND EXPERT SYSTEM

１ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｅｘｐｅｒｉｍｅｎｔａｌｄａｔａｏｎｔｈｅｌｉｑｕｉｄｕｓｌｉｎｅｓｏｒｓｕｒｆａｃｅｓｉｎｂｉｎａｒｙｏｒｔｅｒｎａｒｙｓｙｓｔｅｍｓｆｒｏｍｒｅｆｅｒｅｎｃｅｓａｒｅａｌｗａｙｓｆｉｎｉｔｅ．Ｓｏｍｅｔｉｍｅｓｔ...

RBF-Type Artificial Neural Network Model Applied in Alloy Design of Steels

RBF model,a new type of artificial neural network model was developed to design the content of carbon in low-alloy engineering steels.The errors of the ANN model are：MSE 0.052 1,MSRE 17.85%,and VOF 1.932 9.The results obtained are satisfactory.The method is a powerful aid for designing new steels.