In this paper, a hybrid control strategy for a matrix converter fed wind energy conversion system is presented. Since the wind speed may vary, output parameters like power, frequency and voltage may fluctuate. Hence i...In this paper, a hybrid control strategy for a matrix converter fed wind energy conversion system is presented. Since the wind speed may vary, output parameters like power, frequency and voltage may fluctuate. Hence it is necessary to design a system that regulates output parameters, such as voltage and frequency, and thereby provides a constant voltage and frequency output from the wind energy conversion system. Matrix converter is used in the proposed solution as the main power conditioner as a more efficient alternative when compared to traditional back-back converter structure. To control the output voltage, a vector modulation based refined control structure is used. A power tracker is included to maximize the mechanical output power of the turbine. Over current protection and clamp circuit input protection have been introduced to protect the system from over current. It reduces the spikes generated at the output of the converter. The designed system is capable of supplying an output voltage of constant frequency and amplitude within the expected ranges of input during the operation. The matrix converter control using direct modulation method, modified Venturini modulation method and vector modulation method was simulated, the results were compared and it was inferred that vector modulation method was superior to the other two methods. With the proposed technique, voltage transfer ratio and harmonic profile have been improved compared to the other two modulation techniques. The behaviour of the system is corroborated by MATLAB Simulink, and hardware is realized using an FPGA controller. Experimental results are found to be matching with the simulation results.展开更多
Matrix converter fed motor drive is superior to pulse width modulation inverter drives since it not only provides bi-directional power flow,sinusoidal input/output currents,unity input power factor,but also allows a c...Matrix converter fed motor drive is superior to pulse width modulation inverter drives since it not only provides bi-directional power flow,sinusoidal input/output currents,unity input power factor,but also allows a compact design due to the lack of DC-link capacitors for energy storage.In this paper,model and control of matrix converter fed induction motor drive system are analyzed.A combined control strategy is simplified and improved,which realizes space vector pulse width modulation of matrix converter and rotor flux oriented vector control technique for induction motor drive simultaneously.This control strategy combines the advantages of matrix converter with the good drive performance of vector control technique.Experimental results demonstrate the feasibility and effectiveness of the proposed control strategy.展开更多
This paper proposes a dual-frequency discontinuous space vector pulse width modulation(DFDSVPWM)for a five-phase voltage source inverter with harmonic injection.In this modulation,for dual-frequency voltage output and...This paper proposes a dual-frequency discontinuous space vector pulse width modulation(DFDSVPWM)for a five-phase voltage source inverter with harmonic injection.In this modulation,for dual-frequency voltage output and reduction of switching losses,two different zero-vector-inserted modes are flexibly employed by alternatively using two types of zero vectors.Based on the comparison with continuous SVPWM,the idea and principle of the proposed DFDSVPWM are analyzed and an example of PWM signals for one bridge is also presented.For switching losses analysis,the impact factors and the calculation method are investigated and the corresponding implementation is given as well.The simulation and experimental results from a prototype verify the correctness and effectiveness of the proposed modulation and it has the advantages of outputting dual-frequency voltage and reducing switching losses.展开更多
电压源换流器型直流输电(voltage source converter based HVDC,VSC-HVDC)应用于大容量功率传输的主要障碍之一是其相对较高的换流器损耗。因而,换流器损耗的准确计算对系统设计、器件参数及冷却装置的选择非常重要。通过分析换流器IGB...电压源换流器型直流输电(voltage source converter based HVDC,VSC-HVDC)应用于大容量功率传输的主要障碍之一是其相对较高的换流器损耗。因而,换流器损耗的准确计算对系统设计、器件参数及冷却装置的选择非常重要。通过分析换流器IGBT器件的开关特性,同时考虑结温、死区效应的影响,提出一种基于曲线拟合理论的通用换流器损耗计算方法。该方法能够有效利用厂家提供的器件特性参数,适合于实际工程应用。在此基础上,分析了正弦脉宽和最小开关PWM两种调制方式下的换流器损耗特性,建立了基于PSCAD/EMTDC的通用的损耗计算模块。展开更多
文摘In this paper, a hybrid control strategy for a matrix converter fed wind energy conversion system is presented. Since the wind speed may vary, output parameters like power, frequency and voltage may fluctuate. Hence it is necessary to design a system that regulates output parameters, such as voltage and frequency, and thereby provides a constant voltage and frequency output from the wind energy conversion system. Matrix converter is used in the proposed solution as the main power conditioner as a more efficient alternative when compared to traditional back-back converter structure. To control the output voltage, a vector modulation based refined control structure is used. A power tracker is included to maximize the mechanical output power of the turbine. Over current protection and clamp circuit input protection have been introduced to protect the system from over current. It reduces the spikes generated at the output of the converter. The designed system is capable of supplying an output voltage of constant frequency and amplitude within the expected ranges of input during the operation. The matrix converter control using direct modulation method, modified Venturini modulation method and vector modulation method was simulated, the results were compared and it was inferred that vector modulation method was superior to the other two methods. With the proposed technique, voltage transfer ratio and harmonic profile have been improved compared to the other two modulation techniques. The behaviour of the system is corroborated by MATLAB Simulink, and hardware is realized using an FPGA controller. Experimental results are found to be matching with the simulation results.
文摘Matrix converter fed motor drive is superior to pulse width modulation inverter drives since it not only provides bi-directional power flow,sinusoidal input/output currents,unity input power factor,but also allows a compact design due to the lack of DC-link capacitors for energy storage.In this paper,model and control of matrix converter fed induction motor drive system are analyzed.A combined control strategy is simplified and improved,which realizes space vector pulse width modulation of matrix converter and rotor flux oriented vector control technique for induction motor drive simultaneously.This control strategy combines the advantages of matrix converter with the good drive performance of vector control technique.Experimental results demonstrate the feasibility and effectiveness of the proposed control strategy.
基金This work was supported in part by the National Natural Science Foundation of China(51507079)the China Postdoctoral Science Foundation Funded Project(2014M560421,2016T90454)the Fundamental Research Funds for the Central Universities(NJ20160046,NS2018025).
文摘This paper proposes a dual-frequency discontinuous space vector pulse width modulation(DFDSVPWM)for a five-phase voltage source inverter with harmonic injection.In this modulation,for dual-frequency voltage output and reduction of switching losses,two different zero-vector-inserted modes are flexibly employed by alternatively using two types of zero vectors.Based on the comparison with continuous SVPWM,the idea and principle of the proposed DFDSVPWM are analyzed and an example of PWM signals for one bridge is also presented.For switching losses analysis,the impact factors and the calculation method are investigated and the corresponding implementation is given as well.The simulation and experimental results from a prototype verify the correctness and effectiveness of the proposed modulation and it has the advantages of outputting dual-frequency voltage and reducing switching losses.
文摘电压源换流器型直流输电(voltage source converter based HVDC,VSC-HVDC)应用于大容量功率传输的主要障碍之一是其相对较高的换流器损耗。因而,换流器损耗的准确计算对系统设计、器件参数及冷却装置的选择非常重要。通过分析换流器IGBT器件的开关特性,同时考虑结温、死区效应的影响,提出一种基于曲线拟合理论的通用换流器损耗计算方法。该方法能够有效利用厂家提供的器件特性参数,适合于实际工程应用。在此基础上,分析了正弦脉宽和最小开关PWM两种调制方式下的换流器损耗特性,建立了基于PSCAD/EMTDC的通用的损耗计算模块。
