Structural Design Strategies of Polymer Matrix Composites for Electromagnetic Interference Shielding:A Review

With the widespread application of electronic communication technology,the resulting electromagnetic radiation pollution has been significantly increased.Metal matrix electromagnetic interference(EMI)shielding materials have disadvantages such as high density,easy corrosion,difficult processing and high price,etc.Polymer matrix EMI shielding composites possess light weight,corrosion resistance and easy processing.However,the current polymer matrix composites present relatively low electrical conductivity and poor EMI shielding performance.This review firstly discusses the key concept,loss mechanism and test method of EMI shielding.Then the current development status of EMI shielding materials is summarized,and the research progress of polymer matrix EMI shielding composites with different structures is illustrated,especially for their preparation methods and evaluation.Finally,the corresponding key scientific and technical problems are proposed,and their development trend is also prospected.

A comprehensive review on material selection for polymer matrix composites subjected to impact load

Polymer matrix composites(PMC)are extensively been used in many engineering applications.Various natural fibers have emerged as potential replacements to synthetic fibers as reinforcing materials composites owing to their fairly better mechanical properties,low cost,environment friendliness and biodegradability.Selection of appropriate constituents of composites for a particular application is a tedious task for a designer/engineer.Impact loading has emerged as the serious threat for the composites used in structural or secondary structural application and demands the usage of appropriate fiber and matrix combination to enhance the energy absorption and mitigate the failure.The objective of the present review is to explore the composite with various fiber and matrix combination used for impact applications,identify the gap in the literature and suggest the potential naturally available fiber and matrix combination of composites for future work in the field of impact loading.The novelty of the present study lies in exploring the combination of naturally available fiber and matrix combination which can help in better energy absorption and mitigate the failure when subjected to impact loading.In addition,the application of multi attributes decision making(MADM)tools is demonstrated for selection of fiber and matrix materials which can serve as a benchmark study for the researchers in future.

Prediction of Viscoelastic Behavior of Unidirectional Polymer Matrix Composites

To develop a novel method predicting the viscoelastic behavior of polymer matrix composites according to the viscoelasticity of the matrix, we used the viscoelastic model of the matrix to build new models for unidirectional composites in both 0° and 90° directions. Viscoelastic parameters for both new models were derived, and the obtained equations shared the same form as the viscoelastic constitutive equation of matrix material. The viscoelastic behaviors of matrix material and unidirectional composites were also tested. Results showed that fitting parameters of creep compliance equation were close to the theoretical values of viscoelastic constitutive parameters of the unidirectional composites, proving the validity of the models. A new method was obtained to predict the viscoelastic property of the unidirectional composites based on the viscoelastic property of composite matrix and elastic property of the unidirectional composites. This method provides a theoretical basis for future studies on the viscoelasticity of composite laminates.

Preparation and Compressive Stress Effect of Polymer Matrix RE-Fe Giant Magnetostrictive Composite

Polymer matrix RE-Fe giant magnetostrictire composite （GMPC） was prepared using bonding and magnetic field forming technique, and magnetostriction of samples was measured for different compressive stress. The experimental results show thai there is certain compressive effect in GMPC. And the influence of compressive stress on magnetostriction of sample was investigated. It offers essential reference for application and device design of GMPC.

Preparation of a Slow Release Biofertilizer From a Polymeric Urea-Formaldehyde Matrix (PUFM)

Fertilizers industry faces the challenge of improving the efficiency of its products either by optimizing the fertilizers in use or by developing new types of them.During the last decade,controlled and slow release technologies have become more important.These technologies aim to increase the efficiency of the applied substance by increasing its action over time and avoiding losses of all kinds(leaching,volatilization).The main purpose of the current study was to obtain a slow release biofertilizer by incorporating microalgae into a polymeric urea-formaldehyde matrix(PUFM).The quantitative analysis of macronutrients and micronutrients in the microalgae was determined using different techniques including titration,UV and Atomic Adsorption Spectroscopy.The matrix and the formulation obtained(PUFM+CHLO)were also characterized by Infrared Spectroscopy(FTIR)and Scanning Electron Microscopy(SEM).The“in vitro”study showed a typical slow release behavior of nitrogen(N),phosphorus(P)and potassium(K)macronutrients.It was also shown that(PUFM+CHLO)formulation has the slowest macronutrients release time with a maximum release of 28%,26%y 46%for(N-P-K)macronutrients respectively during a period of 30 days.The"in vivo"study exposed the benefits of the biofertilizer formulation(PUFM+CHLO)from conventional commercial fertilizer(CF)(NPK-14-5-12).Due to the presence of nutrients of natural origin in microalgae,(PUFM+CHLO)shows ecological effects which could also developing sustainable agriculture systems.

Partial pore blockage and polymer chain rigidification phenomena in PEO/ZIF-8 mixed matrix membranes synthesized by in situ polymerization

Nanostructured zeolitic imidazolate frameworks(ZIF-8) was incorporated into the mixture of poly(ethylene glycol) methyl ether acrylate(PEGMEA) and pentaerythritol triacrylate(PETA) to synthesize mixed matrix membranes(MMMs) by in situ polymerization for CO_2/CH_4 separation. The solvent-free polymerization between PEGMEA and PETA was induced by UV light with 1-hydroxylcyclohexyl phenyl ketone as initiator. The chemical structural characterization was performed by Fourier transform infrared spectroscopy. The morphology was characterized by scanning electron microscope. The average chain-to-chain distance of the polymer chains in MMMs was investigated by X-ray diffraction. The thermal property was evaluated by differential scanning calorimetry. The CH_4 and CO_2 gas transport properties of MMMs are reported. The relationship between gas permeation–separation performances or physical properties and ZIF-8 loading is also discussed. However, the permeation–separation performance was not improved in Robeson upper bound plot compared with original polymer membrane as predicted. The significant partial pore blockage and polymer rigidification effect around the ZIFs confirmed by the increase in glass temperature and the decrease in the d-spacing, were mainly responsible for the failure in performance improvement, which offset the high diffusion induced by porous ZIF-8.

Thermal conductivity model of filled polymer composites

Theoretical and empirical models for predicting the thermal conductivity of polymer composites were summarized since the 1920s.The effects of particle shape,filler amount,dispersion state of fillers,and interfacial thermal barrier on the thermal conductivity of filled polymer composites were investigated,and the agreement of experimental data with theoretical models in literatures was discussed.Silica with high thermal conductivity was chosen to mix with polyvinyl-acetate （EVA） copolymer to prepare SiO2/EVA co-films.Experimental data of the co-films＇ thermal conductivity were compared with some classical theoretical and empirical models.The results show that Agari＇s model,the mixed model,and the percolation model can predict well the thermal conductivity of SiO2/EVA co-films.

THERMOCHROMIC POLYMER MATERIALS

Thermochromic polymers will play an extremely important role in the next future. The physical background of thermochromism and the state of development of thermochromic polymers based on light absorption effects are reported. In detail, the interactions between the polymer matrix and the thermochromic composite - composed of leuco or indicator dyes - are discussed on a molecular level. Thermochromic hydrogels with extremely high transparency, an outstanding switching behavior from colorless to colored or between different colors is presented. Preparation of thermosetting and thermoplastic polymers, including the resulting optical, and, for the first time, the mechanical properties are discussed in relation to matrix tuned high-resistant microcapsules.

Effects of ultrasonic pretreatment on sludge dewaterability and extracellular polymeric substances distribution in mesophilic anaerobic digestion

Effect of ultrasonic pretreatment on sludge dewaterability was determined and the fate of extracellular polymeric substances （EPS） matrix in mesophilic anaerobic digestion after ultrasonic pretreatment was studied. Characteristics of proteins （PN）, polysaccharides （PS）, excitation-emission matrix （EEM） fluorescence spectroscopy and molecular weight （MW） distribution of dissolved organic matters （DOM） in different EPS fractions were evaluated. The results showed that after ultrasonic pretreatment, the normalized capillary suction time （CST） decreased from 44.4 to 11.1 （sec·L）/g total suspended solids （TSS） during anaerobic digestion, indicating that sludge dewaterability was greatly improved. The normalized CST was significantly correlated with PN concentration （R2 = 0.92, p 〈 0.01） and the PN/PS ratio （R2 = 0.84, p 〈 0.01） in the loosely bound EPS （LB-EPS） fraction. Meanwhile, the average MW of DOM in the LB- EPS and tightly bound EPS （TB-EPS） fractions also had a good correlation with the normalized CST （R2 〉 0.66, p 〈 0.01）. According to EEM fluorescence spectroscopy, tryptophan-like substances intensities in the slime, LB-EPS and TB-EPS fractions were correlated with the normalized CST. The organic matters in the EPS matrix played an important role in influencing sludge dewaterability.

Material selection of polymeric composite automotive bumper beam using analytical hierarchy process

Selection of materials,as an area of design research,has been under considerable interest over the years.Materials selection is one of the most important activities in the product development process.Inappropriate decision of materials can cause the product to be reproduced or remanufactured.To avoid this circumstance,one of the useful tools that can be employed in determining the most appropriate material is analytical hierarchy process(AHP).To illustrate the application of AHP,six different types of composite materials were considered.The most appropriate one for suitability of use in manufacturing automotive bumper beam was determined by considering eight main selection factors and 12 sub-factors.The AHP analysis reveals that the glass fibre epoxy is the most appropriate material because it has the highest value(25.7%,mass fraction) compared with other materials.The final material is obtained by performing six different scenarios of the sensitivity analysis.It is proved that glass fibre epoxy is the most optimum decision.

Production and characterisation of new bioresorbable radiopaque Mg–Zn–Y alloy to improve X-ray visibility of polymeric scaffolds

For the medical diagnosis,radiopaque materials(RM)made from high specific gravity elements like Pt,Au,Ta,Iodine,Bromine are either attached or blended or coated on an implant to makes it detectable under X-ray/Fluoroscopy/CT-Scan.RM facilitate the surgeon in an operation theatre to position an implant during the surgery.Mainly,RM are non-degradable,thus in case of biodegradable implants,it may detach from the body and accumulate in vital organ cause serious health issue.Therefore,a new bioresorbable radiopaque material(BRM)was produced by alloying the high specific gravity elements Zn(35%w/w)and Y(4%w/w)with Mg metal.In this alloy,three main phases were identified,alpha Mg,Mg_(7)Zn_(3)and icosahedral quasicrystalline I-phase Mg3Zn6Y,which reinforce the Mg matrix.Hereafter,BRM was powdered to a size of less than 25 microns and blended in different ratios with bioresorbable poly-L-lactic acid(PLLA)for fabricating PLLA/BRM bio-composite.BRM microparticles were uniformly distributed and interfacial bonded with the matrix.The X-ray was passed through bio-composite to captureμCT radiograph for evaluating linear attenuation co-efficient(μ)and optical density(OD).Thermal analysis reveals that BRM particles act as a nucleating site and enhance the crystallinity of the polymeric chain.During the In Vitro accelerated degradation study,the alkaline nature of BRM neutralise the acidity of PLLA and balance the pH of the body fluid to reduce the inflammatory reactions,but this compromises the stability of the polymer as it increases the decomposition rate.

Luminescence of Terbium Complexes Incorporated into Silica Matrix

Binary and ternary terbium complexes were synthesized: Tb(N PA) 3·4H 2O and Tb(N PA) 3(phen·2H 2O (N HPA = N phenyl 2 aminobenzoic acid and phen = 1,10 phenanthroline). These complexes were introduced into inorganic polymeric porous silica matrix by the sol gel method. The luminescence behavior of the complexes in silica gels was compared with the corresponding solid state complexes by means of emission, excitation spectra and luminescence lifetimes. The result indicates that the terbium ions show fewer emission lines and lower emission intensities in the silica gel than those in pure terbium complexes. The lifetimes of terbium ions in silica gel doped with terbium complexes become longer than those of terbium complexes.

EFFECT OF OVERLAP CONCENTRATION AND PERSISTENCE LENGTH ON DNA SEPARATION IN POLYMER SOLUTIONS BY ELECTROPHORESIS

The persistence length and the overlap concentration(c~*) of poly(ethylene oxide)(PEO) and hydroxyethylcellulose(HEC) with similar molecular weight in 1×TBE buffer were studied by laser light scattering and viscometry.Their effect on DNA separation was investigated by capillary electrophoresis.It was determined that the persistence length of HEC was at least 5 times higher than that of PEO.Therefore,the c~* of HEC was smaller than that of PEO by a factor of ca.2.5.It was also found that the c~* values deter...

Nonlinear Micromechanical Modelling of Transverse Tensile Damage Behavior in Fiber-Reinforced Polymer Composites

The investigation focusing on the mechanical behaviors at the microstructural level in composite materials can provide valuable insight into the failure mechanisms at larger scales.A micromechanics damage model which comprises the coupling of the matrix constitutive model and the cohesive zone(CZM)model at fiber-matrix interfaces is presented to evaluate the transverse tensile damage behaviors of unidirectional(UD)fiber-reinforced polymer(FRP)composites.For the polymeric matrix that exhibits highly non-linear mechanical responses,special focus is paid on the formulation of the constitutive model,which characterizes a mixture of elasticity,plasticity as well as damage.The proposed constitutive model includes the numerical implementation of a fracture plane based ellipse-parabola criterion that is an extension of the classic Mohr-Coulomb criterion,corresponding post-yield flow rule and post-failure degradation rule in the fully implicit integration scheme.The numerical results are in good agreement with experimental measurements.It is found that directly using the matrix properties measured at the ply level to characterize the mechanical responses at the constituent level may bring large discrepancies in homogenized stress-strain responses and dominant failure mechanisms.The distribution of fracture plane angles in matrix is predicted,where it is shown to provide novel insight into the microscopic damage initiation and accumulation under transverse tension.

Usability of Polymer Concrete as a Machine-Making Material Regarding Fatigue Strength

In many studies conducted on polymer concretes of different structures, some of the mechanical behaviours such as compression, bending, damping, and fatigue have been investigated. Specimens and experimental taxonomy used in the majority of these studies explore the idea of using polymer concrete either as a construction material or as a material for building the body of machine tools. The experimental methodology and specimens used in this study to investigate the fatigue strength were chosen according to the machine-making material. In “rotational flexural fatigue” experiments conducted using high compressive strength composite materials, fatigue strength values were observed to be lower than previous studies.

Electric Modulus Analysis of Carbon Black/Copolymer Composite Materials

We have investigated the electrical properties of carbon black (CB) loaded in ethylene butylacrylate copolymer composite (EBA) in the frequency range between 102 and 104 Hz and temperature range between 153 and 353 K. The frequency dependence of electrical data that have been analyzed in two frameworks: the electrical modulus formalism with the Kohlrausch-Williams-Watts stretched exponential function (KWW) and the electrical conductivity by using the Jonscher’s power law in the frequency domain. The stretching exponent βKWW and n are found to be temperature independent for all CB fractions and to be decreased when the CB volume concentrations loaded in copolymer matrix increases. It is found that the activation energy obtained by the modulus method is in good agreement with that obtained by the DC conductivity in the power law which is independent on the CB contents that exist in the copolymer matrix, suggesting that these particles do not interact significantly with the chain segments of the macromolecules in the EBA copolymer.

Fabrication and Characterization of Glass Fiber with SiC Reinforced Polymer Composites

Glass Fiber Reinforced Polymeric (GFRP) Composites are most commonly used as bumpers for vehicles, electrical equipment panels, and medical devices enclosures. These materials are also widely used for structural applications in aerospace, automotive, and in providing alternatives to traditional metallic materials. The paper fabricated epoxy and polyester resin composites by using silicon carbide in various proportions along with GFRP. The hand lay-up technique was used to fabricate the laminates. To determine the properties of fabricated composites, the tensile, impact, and flexural tests were conducted. This method of fabrication was very simple and cost-effective. Their mechanical properties like yield strength, yield strain, Young’s modulus, flexural modulus, and impact energy were investigated. The mechanical properties of the GFRP composites were also compared with the fiber volume fraction. The fiber volume fraction plays a major role in the mechanical properties of GFRP composites. Young’s modulus and tensile strength of fabricated composites were modelled and compared with measured values. The results show that composites with epoxy resin demonstrate higher strength and modulus compared to composites with polyester resin.

基于耦合强度设计结构矩阵的复杂产品配置模型优化及应用

针对复杂产品内部结构耦合性强、配置设计求解效率和准确性低的问题,提出基于耦合强度设计结构矩阵的复杂产品配置模型优化技术。定义了产品配置结构体,基于结构体之间的父子逻辑关系和约束关系,对配置模型进行耦合分析,并对结构体间的耦合关系进行量化。通过映射得到配置模型耦合强度设计结构矩阵,对其进行分解变换并给出的聚合强度指数函数进行判定,得到结构体聚合集。采用基于净供给度解耦算法撕裂聚合集,重组配置结构体,优化配置模型。该技术在高档数控机床配置设计中得到了应用与验证,提高了数控机床的配置效率与准确性。

合成高等规立构PAN的聚合优化方法的研究

通过提出“分解组合”的优化策略思想 ,对合成高等规立构聚丙烯腈 (PAN)的聚合方法进行优化处理 ,建立了一种新型的合成方法——丙烯腈阴离子模板聚合法 (ANMAP)。实验结果表明 ,ANMAP聚合及工艺流程有效、合理、可行 ,同时证明了所提出的“分解组合”

厚截面树脂基复合材料的温度场研究Ⅰ:模拟

研究了厚截面树脂基复合材料制造过程中的内部温度场发展变化。从含有非线性内热源的瞬态热传导方程出发 ,建立了用于分析复合材料热传导的有限元公式。以通用有限元软件包为基础 ,开发了能够模拟复合材料整个制造过程中复杂物理化学变化的软件。并用该软件对两种不同厚度树脂基复合材料的制造过程进行了模拟计算 ,发现现有的固化一般厚度复合材料的固化历程不适合固化厚截面复合材料。