El Niño-Southern Oscillation(ENSO)is the strongest interannual climate mode influencing the coupled ocean-atmosphere system in the tropical Pacific,and numerous dynamical and statistical models have been develope...El Niño-Southern Oscillation(ENSO)is the strongest interannual climate mode influencing the coupled ocean-atmosphere system in the tropical Pacific,and numerous dynamical and statistical models have been developed to simulate and predict it.In some simplified coupled ocean-atmosphere models,the relationship between sea surface temperature(SST)anomalies and wind stress(τ)anomalies can be constructed by statistical methods,such as singular value decomposition(SVD).In recent years,the applications of artificial intelligence(AI)to climate modeling have shown promising prospects,and the integrations of AI-based models with dynamical models are active areas of research.This study constructs U-Net models for representing the relationship between SSTAs andτanomalies in the tropical Pacific;the UNet-derivedτmodel,denoted asτUNet,is then used to replace the original SVD-basedτmodel of an intermediate coupled model(ICM),forming a newly AI-integrated ICM,referred to as ICM-UNet.The simulation results obtained from ICM-UNet demonstrate their ability to represent the spatiotemporal variability of oceanic and atmospheric anomaly fields in the equatorial Pacific.In the ocean-only case study,theτUNet-derived wind stress anomaly fields are used to force the ocean component of the ICM,the results of which also indicate reasonable simulations of typical ENSO events.These results demonstrate the feasibility of integrating an AI-derived model with a physics-based dynamical model for ENSO modeling studies.Furthermore,the successful integration of the dynamical ocean models with the AI-based atmospheric wind model provides a novel approach to ocean-atmosphere interaction modeling studies.展开更多
Against the backdrop of continuous development in the field of education,universities are encouraged to innovate their talent cultivation systems and objectives.The deep integration of industry and education has emerg...Against the backdrop of continuous development in the field of education,universities are encouraged to innovate their talent cultivation systems and objectives.The deep integration of industry and education has emerged as an effective strategy,aligning with the basic requirements of the new engineering education initiative and exerting a positive impact on socioeconomic development.However,an analysis of the current state of industry-education integration in universities reveals several issues that require optimization,affecting the ultimate effectiveness of integration.To optimize this phenomenon and achieve high-quality development,universities need to further explore the construction of a deep integration model of industry and education,adhering to corresponding principles to form a comprehensive system.On this basis,pathways for deep industry-education integration can be summarized.展开更多
Objective: To investigate the effect of the integrated nursing model in the prevention of chemotherapy-induced peripheral injury. Methods: A total of 60 tumor patients receiving oxaliplatin for 1 - 6 cycles of chemoth...Objective: To investigate the effect of the integrated nursing model in the prevention of chemotherapy-induced peripheral injury. Methods: A total of 60 tumor patients receiving oxaliplatin for 1 - 6 cycles of chemotherapy from January to September 2023 were selected. 30 patients were selected from January to March and divided into the control group, and 30 patients were selected from July to 9 as the experimental group. The control group received conventional chemotherapy nursing, while the experimental group received integrated nursing. Anxiety, peripheral nerve toxicity stage and quality of life score were compared between the two groups before and after intervention. Results: After intervention, the scores of the self-rating Anxiety Scale (SAS) and the total scores of the oxaliplatin Levi specific sensory neurotoxicity scale in the experimental group were significantly lower than those in the control group, and the differences were statistically significant (P< 0.05);The Quality of Life Scale (FACT-G) score of cancer patients was higher than that of control group, and the difference was statistically significant (P< 0.05). Conclusion: The integrated nursing model can effectively reduce the anxiety of patients, reduce the incidence of peripheral nerve injury and improve the quality of life of patients.展开更多
Designing and optimizing complex scientific code for new computing architectures is a challenging task. To address this issue in the E3SM land model (ELM) development, we developed a software tool called SPEL, which f...Designing and optimizing complex scientific code for new computing architectures is a challenging task. To address this issue in the E3SM land model (ELM) development, we developed a software tool called SPEL, which facilitates code generation, verification, and performance tuning using compiler directives within a Function Unit Test framework. In this paper, we present a SPEL extension that leverages the version control system (e.g., Git) to autonomous code generation and demonstrate its application to continuous code integration and development of the ELM software system. The study can benefit the scientific software development community.展开更多
The BOPPPS model has been widely used in information-based teaching reform,which emphasizes studentcentered principles and student participation and interaction,including six steps:bridge-in,objective,pre-assessment,p...The BOPPPS model has been widely used in information-based teaching reform,which emphasizes studentcentered principles and student participation and interaction,including six steps:bridge-in,objective,pre-assessment,participatory learning,post-assessment,and summary.This paper applies the BOPPPS model in the Integrated English course at the three stages of teaching practice-before class,during class,and after class-to achieve blended teaching.It shows that this teaching mode provides students with a more abundant learning experience,helps to stimulate students’learning interests,and improves their comprehensive language application skills.展开更多
Objective: To analyze the impact of an integrated extended care model on improving the quality of life of elderly patients with Type 2 Diabetes Mellitus (T2DM). Methods: A total of 176 patients admitted to the hospita...Objective: To analyze the impact of an integrated extended care model on improving the quality of life of elderly patients with Type 2 Diabetes Mellitus (T2DM). Methods: A total of 176 patients admitted to the hospital from March 2015 to February 2018 were selected and randomly assigned to an observation group and a control group, with 88 patients each. The control group implemented conventional nursing interventions, and the observation group carried out an integrated extended-care model. The level of glycemic control, quality of life, and daily medication adherence between both groups were compared. Results: The observation group showed significant improvement in the level of glycemic control, and their fasting blood glucose, 2-hour postprandial blood glucose, and glycated hemoglobin levels were significantly lower as compared with those in the study group (P < 0.05). The quality of life of the patients in the observation group was higher than that of the control group (P < 0.05). The observation group had a higher compliance score (95.48 ± 7.45) than the control group (81.31 ± 8.72) (t = 8.909, P < 0.05). Conclusion: The integrated extended care model allows patients to receive comprehensive and individualized nursing services after discharge, which improves the effect of drug therapy and the quality of life of patients.展开更多
The core education function of higher vocational colleges is to train technical talents with high quality,so as to meet the needs of talents in the development stage of our society.Under the guidance of talent trainin...The core education function of higher vocational colleges is to train technical talents with high quality,so as to meet the needs of talents in the development stage of our society.Under the guidance of talent training,higher vocational colleges need to pay attention to establishing an all-round and three-dimensional education model,and promote innovation of higher vocational education on the basis of this.It is also a way to promote the innovation of higher vocational education to vigorously promote the construction of“post,course,competition,certificate”mode in the construction of education mode.Through the construction of“post,course,competition,certificate”mode,the education mode of higher vocational colleges is gradually improved,so as to strengthen the effectiveness of talent training in higher vocational colleges.Therefore,in this paper,the author puts forward some suggestions to promote the construction of the integrated education mode of the electronic information engineering technology major in higher vocational colleges,so as to help improve the talent training level of higher vocational colleges.展开更多
Cities are facing challenges of high rise in population number and con-sequently need to be equipped with latest smart services to provide luxuries of life to its residents.Smart integrated solutions are also a need t...Cities are facing challenges of high rise in population number and con-sequently need to be equipped with latest smart services to provide luxuries of life to its residents.Smart integrated solutions are also a need to deal with the social and environmental challenges,caused by increasing urbanization.Currently,the development of smart services’integrated network,within a city,is facing the bar-riers including;less efficient collection and sharing of data,along with inadequate collaboration of software and hardware.Aiming to resolve these issues,this paper recommended a solution for a synchronous functionality in the smart services’integration process through modeling technique.Using this integration modeling solution,atfirst,the service participants,processes and tasks of smart services are identified and then standard illustrations are developed for the better understand-ing of the integrated service group environment.Business process modeling and notation(BPMN)language based models are developed and discussed for a devised case study,to test and experiment i.e.,for remote healthcare from a smart home.The research is concluded with the integration process model application for the required data sharing among different service groups.The outcomes of the modeling are better understanding and attaining maximum automation that can be referenced and replicated.展开更多
Urban-rural integration (URI) is a global challenge that is highly related to inequalities, poverty, economic growth, and other Sustainable Development Goals (SDGs). Existing research has evaluated the extent of URI a...Urban-rural integration (URI) is a global challenge that is highly related to inequalities, poverty, economic growth, and other Sustainable Development Goals (SDGs). Existing research has evaluated the extent of URI and explored its influencing factors, but urban-rural linkages are seldom incorporated in evaluation systems, and geographical factors are rarely recognized as the influencing factors. We construct a URI framework including regional economy, rural development, urban-rural linkage, and urban-rural gap. Based on a dataset consisting of 1,669 counties in China in 2020, we reveal the spatial pattern of URI and find a high correlation between the spatial pattern of URI and the relief degree of land surface (RDLS). Using structural equation modeling, we discover that topography has direct ( − 0.18, p < 0.001) and indirect ( − 0.17, p < 0.001) effects on URI. The indirect negative effects are mediated through the infrastructure, and the combination of localized advantages and modern technical conditions could mitigate the negative impact of topography. Finally, we identify 742 counties as lagging regions in URI, which can be clustered into eight types. Our findings could facilitate policy designing for those countries striving for integrated and sustainable development of urban and rural areas.展开更多
We present a study on the dynamic stability of porous functionally graded(PFG)beams under hygro-thermal loading.The variations of the properties of the beams across the beam thicknesses are described by the power-law ...We present a study on the dynamic stability of porous functionally graded(PFG)beams under hygro-thermal loading.The variations of the properties of the beams across the beam thicknesses are described by the power-law model.Unlike most studies on this topic,we consider both the bending deformation of the beams and the hygro-thermal load as size-dependent,simultaneously,by adopting the equivalent differential forms of the well-posed nonlocal strain gradient integral theory(NSGIT)which are strictly equipped with a set of constitutive boundary conditions(CBCs),and through which both the stiffness-hardening and stiffness-softening effects of the structures can be observed with the length-scale parameters changed.All the variables presented in the differential problem formulation are discretized.The numerical solution of the dynamic instability region(DIR)of various bounded beams is then developed via the generalized differential quadrature method(GDQM).After verifying the present formulation and results,we examine the effects of different parameters such as the nonlocal/gradient length-scale parameters,the static force factor,the functionally graded(FG)parameter,and the porosity parameter on the DIR.Furthermore,the influence of considering the size-dependent hygro-thermal load is also presented.展开更多
The grounded theory of qualitative methods was applied to researching the social integration of tourism la-bor migrants in the Jiuhua Mountain of Anhui Province, China. The research was conducted based on the in-depth...The grounded theory of qualitative methods was applied to researching the social integration of tourism la-bor migrants in the Jiuhua Mountain of Anhui Province, China. The research was conducted based on the in-depth in-terviewing of 15 samples, open-consultation and the analysis of secondhand data. The integration models of tourism labor migrants in the Jiuhua Mountain were formed through four processes including theoretic sampling, cod-ing-analysis, cross-tabulation and contextualization. The result shows that modes of production and life styles decide self-integration orientation of tourism labor migrants in the Jiuhua Mountain. Cultural differences are fundamental dis-similarity between tourism labor migrants and natives. There are three kinds of integration models including rapid, free and gradually advancing integration. The differences among different types of migrants’ integration models are re-markable. Taking the working integration as the abscissa and taking the life integration as the coordinate, an "S" model of integration matrix appears in the gradually advancing integration of intermediate and high administers from the working to the life which should be paid special attention to.展开更多
Process integration is the important aspect of product development process. The recent researches focus on project management, workflow management and process modeling. Based on the analysis of the process, product de...Process integration is the important aspect of product development process. The recent researches focus on project management, workflow management and process modeling. Based on the analysis of the process, product development process is divided into three levels according to different grains from macroscopy to microcosm. Our research concentrate on the workflow and the free-grained design process. According to the need of representing the data and the relationships among them for process integration, context model is introduced, and its characters are analyzed. The tree-like structure of inheritance among context model's classes is illustrated; The relationships of reference among them are also explained. Then, extensible markup language (XML) file is used to depict these classes. A four-tier framework of process integration has been established, in which model-view-controller pattern is designed to realize the separation between context model and its various views. The integration of applications is applied by the encapsulation of enterprise's business logic as distributed services. The prototype system for the design of air filter is applied in an institute.展开更多
The paradigm of extended enterprise is the core competency focused. An extended enterprise expands its scope from bounding a single enterprise to including additional processes performed by other enterprises. The inte...The paradigm of extended enterprise is the core competency focused. An extended enterprise expands its scope from bounding a single enterprise to including additional processes performed by other enterprises. The integration of processes is enterprise based. This paper proposes a recursive enterprises interconnected chain model for the extended enterprise, and presents an enterprise-based integration framework for the extended enterprise. The case study is based on a motorcycle group corporation.展开更多
General purpose graphic processing unit (GPU) calculation technology is gradually widely used in various fields. Its mode of single instruction, multiple threads is capable of seismic numerical simulation which has ...General purpose graphic processing unit (GPU) calculation technology is gradually widely used in various fields. Its mode of single instruction, multiple threads is capable of seismic numerical simulation which has a huge quantity of data and calculation steps. In this study, we introduce a GPU-based parallel calculation method of a precise integration method (PIM) for seismic forward modeling. Compared with CPU single-core calculation, GPU parallel calculating perfectly keeps the features of PIM, which has small bandwidth, high accuracy and capability of modeling complex substructures, and GPU calculation brings high computational efficiency, which means that high-performing GPU parallel calculation can make seismic forward modeling closer to real seismic records.展开更多
Prediction has become more and more difficult in mineral exploration, especially in the mature exploration environment such as Tongling copper district. For enhancing predictive discovery of hidden ore deposits in suc...Prediction has become more and more difficult in mineral exploration, especially in the mature exploration environment such as Tongling copper district. For enhancing predictive discovery of hidden ore deposits in such mature environment, the key strategies which should be adopted include the innovation of the exploration models, application of the advanced exploration techniques and integration of multiple sets of information. The innovation of the exploration models should incorporate the new metallogenic concepts that are based on the geodynamic anatomization. The advanced techniques applied in the mature exploration environment should aim at the speciality and complexity of the geological setting and working environments. The information synthesis is to integrate multiple sets of data for giving a more credible and visual prospectivity map by using the geographic imformation system(GIS) and several mathematical methods, such as weight of evidence and fuzzy logic, which can extract useful information from every set of data as much as possible. Guided by these strategies, a predictive exploration in Fenghuangshan ore field of Tongling copper district was implemented, and a hidden ore deposit was discovered.展开更多
The 3D clearance of a high-speed train(HST) is critical to ensure the safety of railway transportation. Many studies have been conducted on the inspection of the clearance profile in railway operation based on the vis...The 3D clearance of a high-speed train(HST) is critical to ensure the safety of railway transportation. Many studies have been conducted on the inspection of the clearance profile in railway operation based on the vision system, but few researchers have focused on the computation of the 3D clearance in the design phase of an HST. This paper summarizes the virtual 3D clearance computation of an HST based on model integration and the convex hull method. First, both the aerodynamic and kinetic analysis models of the HST are constructed. The two models are then integrated according to the corresponding relationship map, and an array of transformation matrixes of the HST is created to drive the designed model simulating the physical railway motion. Furthermore, the convex hull method is adopted to compute the 3D envelope of the moving train. Finally, the Hausdorff metric is involved in the measurement of the minimum clearance model and the 3D envelope model. In addition, the color map of the Hausdorff distance is established to verify that the designed shape of the HST meets the national standards. This paper provides an effective method to accurately calculate the 3D clearance for the shape design of an HST, which greatly reduces the development cost by minimizing the physical prototype that must be built.展开更多
Towards integration of supply chain, manufacturing/production and investment decision making, this paper presents a hierarchical model architecture which contains six sub-models covering the areas of manufacturing con...Towards integration of supply chain, manufacturing/production and investment decision making, this paper presents a hierarchical model architecture which contains six sub-models covering the areas of manufacturing control, production operation, design and revamp, production management, supply chain and investment decision making. Six types of flow, material, energy, information, humanware, partsware and capital are clasified. These flows connect enterprise components/subsystems to formulate system topology and logical structure. Enterprise components/subsystems are abstracted to generic elementary and composite classes. Finally, the model architecture is applied to a management system of an integrated suply chain, and suggestion are made on the usage of the model architecture and further development of the model as well as implementation issues.展开更多
The globalization and the intensive competition of th e automotive market require shortening the product development cycle, improving the quality and reducing the cost. Optimizing the product development process, b ui...The globalization and the intensive competition of th e automotive market require shortening the product development cycle, improving the quality and reducing the cost. Optimizing the product development process, b uilding product’s consistent defining model for life cycle, and realizing the in tegration of CAD/CAM/CAE and Concurrent Engineering (CE) become the means to acc ept the challenge. A new product modeling technology, Multi Model Technology (MM T), is provided in this paper to meet the needs of the challenge for automotive powertrain product development. First, the paper introduces the concept of Multi Model Technology. MMT introduce s Object-oriented Technology (OT) into product modeling process and combine OT with feature-based modeling technology. With the help of OT, MMT builds product object model to support system level management in product development. The obj ect model of the product is a Multi Model Structure. The MMS consists of finish part model level (assembly model level), rough part model level (part model leve l), function model level and basic model level. Every models in the MMS is creat ed by feature-based technology in design process. In this case, models in the M MS of product can be shared by casting mould, sand core and sand core mould. The refore, CAD engineers, CAE engineers and CAM engineers can work concurrently and the integration of CAD/CAM/CAE can be realized. Second, MMT is applied in cylinder head development. The multi model structures of cylinder head, its casting mould, sand core and sand core mould are built, an d the process-oriented feature models of every objects in the multi model struc tures are modeled, the application of different model objects in development pro cess is analyzed. The integrated modeling technology of cylinder head, its casti ng mould, sand core and sand core mould under MMT is studied. And the concurrent engineering oriented integration method of CAD/CAE and the method to realize th e integration of CAD/CAE under MMT are also discussed. Based on above, the integ ration of CAD/CAM/CAE of cylinder head is realized in automotive powertrain prod uct. The practice results shows that the modeling technology in this paper can optimi ze the development process, realize the data sharing and concurrent engineering in the product development process.展开更多
The conventional Kalman filter(CKF)is widely used in tightly-coupled INS/GPS integrated navigation systems.The linearization accuracy of the CKF observation model is one of the decisive factors of the estimation acc...The conventional Kalman filter(CKF)is widely used in tightly-coupled INS/GPS integrated navigation systems.The linearization accuracy of the CKF observation model is one of the decisive factors of the estimation accuracy and therefore navigation accuracy.Additionally,the conventional observation model(COM)used by the filter may be divergent,which would result into some terrible accuracies of INS/GPS integration navigation in some cases.To improve the navigation accuracy,the linearization accuracy of the COM still needs further improvement.To deal with this issue,the observation model is modified with the linearization of the range and range rate equations in this paper.Compared with COM,the modified observation model(MOM)further considers the difference between the real user position and the position calculated by SINS.To verify the advantages of this model,INS/GPS integrated navigation simulation experiments are conducted with the usage of COM and MOM respectively.According to the simulation results,the positions(velocities)calculated using COM are divergent over time while the others using MOM are convergent,which demonstrates the higher linearization accuracy of MOM.展开更多
Lie symmetry analysis is applied to a(3+1)-dimensional Virasoro integrable model and the corresponding similarity reduction equations are obtained with the different infinitesimal generators.Invariant solutions with a...Lie symmetry analysis is applied to a(3+1)-dimensional Virasoro integrable model and the corresponding similarity reduction equations are obtained with the different infinitesimal generators.Invariant solutions with arbitrary functions for the(3+1)-dimensional Virasoro integrable model,including the interaction solution between a kink and a soliton,the lump-type solution and periodic solutions,have been studied analytically and graphically.展开更多
基金supported by the National Natural Science Foundation of China(NFSCGrant No.42030410)+2 种基金Laoshan Laboratory(No.LSKJ202202402)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB40000000)the Startup Foundation for Introducing Talent of NUIST.
文摘El Niño-Southern Oscillation(ENSO)is the strongest interannual climate mode influencing the coupled ocean-atmosphere system in the tropical Pacific,and numerous dynamical and statistical models have been developed to simulate and predict it.In some simplified coupled ocean-atmosphere models,the relationship between sea surface temperature(SST)anomalies and wind stress(τ)anomalies can be constructed by statistical methods,such as singular value decomposition(SVD).In recent years,the applications of artificial intelligence(AI)to climate modeling have shown promising prospects,and the integrations of AI-based models with dynamical models are active areas of research.This study constructs U-Net models for representing the relationship between SSTAs andτanomalies in the tropical Pacific;the UNet-derivedτmodel,denoted asτUNet,is then used to replace the original SVD-basedτmodel of an intermediate coupled model(ICM),forming a newly AI-integrated ICM,referred to as ICM-UNet.The simulation results obtained from ICM-UNet demonstrate their ability to represent the spatiotemporal variability of oceanic and atmospheric anomaly fields in the equatorial Pacific.In the ocean-only case study,theτUNet-derived wind stress anomaly fields are used to force the ocean component of the ICM,the results of which also indicate reasonable simulations of typical ENSO events.These results demonstrate the feasibility of integrating an AI-derived model with a physics-based dynamical model for ENSO modeling studies.Furthermore,the successful integration of the dynamical ocean models with the AI-based atmospheric wind model provides a novel approach to ocean-atmosphere interaction modeling studies.
基金2023 Annual Project of the China Association for Construction Education“Research on the Development Path of Private Colleges and Industry Integration in Liaoning Province Under the Strategy of Intelligent Manufacturing Strong Province”(Project number:2023239)。
文摘Against the backdrop of continuous development in the field of education,universities are encouraged to innovate their talent cultivation systems and objectives.The deep integration of industry and education has emerged as an effective strategy,aligning with the basic requirements of the new engineering education initiative and exerting a positive impact on socioeconomic development.However,an analysis of the current state of industry-education integration in universities reveals several issues that require optimization,affecting the ultimate effectiveness of integration.To optimize this phenomenon and achieve high-quality development,universities need to further explore the construction of a deep integration model of industry and education,adhering to corresponding principles to form a comprehensive system.On this basis,pathways for deep industry-education integration can be summarized.
文摘Objective: To investigate the effect of the integrated nursing model in the prevention of chemotherapy-induced peripheral injury. Methods: A total of 60 tumor patients receiving oxaliplatin for 1 - 6 cycles of chemotherapy from January to September 2023 were selected. 30 patients were selected from January to March and divided into the control group, and 30 patients were selected from July to 9 as the experimental group. The control group received conventional chemotherapy nursing, while the experimental group received integrated nursing. Anxiety, peripheral nerve toxicity stage and quality of life score were compared between the two groups before and after intervention. Results: After intervention, the scores of the self-rating Anxiety Scale (SAS) and the total scores of the oxaliplatin Levi specific sensory neurotoxicity scale in the experimental group were significantly lower than those in the control group, and the differences were statistically significant (P< 0.05);The Quality of Life Scale (FACT-G) score of cancer patients was higher than that of control group, and the difference was statistically significant (P< 0.05). Conclusion: The integrated nursing model can effectively reduce the anxiety of patients, reduce the incidence of peripheral nerve injury and improve the quality of life of patients.
文摘Designing and optimizing complex scientific code for new computing architectures is a challenging task. To address this issue in the E3SM land model (ELM) development, we developed a software tool called SPEL, which facilitates code generation, verification, and performance tuning using compiler directives within a Function Unit Test framework. In this paper, we present a SPEL extension that leverages the version control system (e.g., Git) to autonomous code generation and demonstrate its application to continuous code integration and development of the ELM software system. The study can benefit the scientific software development community.
基金The Sichuan Association for Non-Government Education Research Project“Task-Based Curriculum Design and Research under the Construction of Practical Teaching System:Taking the Integrated English as an Example”(MBXH23YB463)2023 Courses Ideological and Political Project of Southwest Jiaotong University Hope College“Integrated English I”(KCSZ2023022)。
文摘The BOPPPS model has been widely used in information-based teaching reform,which emphasizes studentcentered principles and student participation and interaction,including six steps:bridge-in,objective,pre-assessment,participatory learning,post-assessment,and summary.This paper applies the BOPPPS model in the Integrated English course at the three stages of teaching practice-before class,during class,and after class-to achieve blended teaching.It shows that this teaching mode provides students with a more abundant learning experience,helps to stimulate students’learning interests,and improves their comprehensive language application skills.
文摘Objective: To analyze the impact of an integrated extended care model on improving the quality of life of elderly patients with Type 2 Diabetes Mellitus (T2DM). Methods: A total of 176 patients admitted to the hospital from March 2015 to February 2018 were selected and randomly assigned to an observation group and a control group, with 88 patients each. The control group implemented conventional nursing interventions, and the observation group carried out an integrated extended-care model. The level of glycemic control, quality of life, and daily medication adherence between both groups were compared. Results: The observation group showed significant improvement in the level of glycemic control, and their fasting blood glucose, 2-hour postprandial blood glucose, and glycated hemoglobin levels were significantly lower as compared with those in the study group (P < 0.05). The quality of life of the patients in the observation group was higher than that of the control group (P < 0.05). The observation group had a higher compliance score (95.48 ± 7.45) than the control group (81.31 ± 8.72) (t = 8.909, P < 0.05). Conclusion: The integrated extended care model allows patients to receive comprehensive and individualized nursing services after discharge, which improves the effect of drug therapy and the quality of life of patients.
文摘The core education function of higher vocational colleges is to train technical talents with high quality,so as to meet the needs of talents in the development stage of our society.Under the guidance of talent training,higher vocational colleges need to pay attention to establishing an all-round and three-dimensional education model,and promote innovation of higher vocational education on the basis of this.It is also a way to promote the innovation of higher vocational education to vigorously promote the construction of“post,course,competition,certificate”mode in the construction of education mode.Through the construction of“post,course,competition,certificate”mode,the education mode of higher vocational colleges is gradually improved,so as to strengthen the effectiveness of talent training in higher vocational colleges.Therefore,in this paper,the author puts forward some suggestions to promote the construction of the integrated education mode of the electronic information engineering technology major in higher vocational colleges,so as to help improve the talent training level of higher vocational colleges.
文摘Cities are facing challenges of high rise in population number and con-sequently need to be equipped with latest smart services to provide luxuries of life to its residents.Smart integrated solutions are also a need to deal with the social and environmental challenges,caused by increasing urbanization.Currently,the development of smart services’integrated network,within a city,is facing the bar-riers including;less efficient collection and sharing of data,along with inadequate collaboration of software and hardware.Aiming to resolve these issues,this paper recommended a solution for a synchronous functionality in the smart services’integration process through modeling technique.Using this integration modeling solution,atfirst,the service participants,processes and tasks of smart services are identified and then standard illustrations are developed for the better understand-ing of the integrated service group environment.Business process modeling and notation(BPMN)language based models are developed and discussed for a devised case study,to test and experiment i.e.,for remote healthcare from a smart home.The research is concluded with the integration process model application for the required data sharing among different service groups.The outcomes of the modeling are better understanding and attaining maximum automation that can be referenced and replicated.
基金the National Natural Science Foundation of China(Grants No.T2261129477 and 41971220)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA23070300).
文摘Urban-rural integration (URI) is a global challenge that is highly related to inequalities, poverty, economic growth, and other Sustainable Development Goals (SDGs). Existing research has evaluated the extent of URI and explored its influencing factors, but urban-rural linkages are seldom incorporated in evaluation systems, and geographical factors are rarely recognized as the influencing factors. We construct a URI framework including regional economy, rural development, urban-rural linkage, and urban-rural gap. Based on a dataset consisting of 1,669 counties in China in 2020, we reveal the spatial pattern of URI and find a high correlation between the spatial pattern of URI and the relief degree of land surface (RDLS). Using structural equation modeling, we discover that topography has direct ( − 0.18, p < 0.001) and indirect ( − 0.17, p < 0.001) effects on URI. The indirect negative effects are mediated through the infrastructure, and the combination of localized advantages and modern technical conditions could mitigate the negative impact of topography. Finally, we identify 742 counties as lagging regions in URI, which can be clustered into eight types. Our findings could facilitate policy designing for those countries striving for integrated and sustainable development of urban and rural areas.
基金Project supported by the National Natural Science Foundation of China(No.12172169)the Natural Sciences and Engineering Research Council of Canada(No.NSERC RGPIN-2023-03227)。
文摘We present a study on the dynamic stability of porous functionally graded(PFG)beams under hygro-thermal loading.The variations of the properties of the beams across the beam thicknesses are described by the power-law model.Unlike most studies on this topic,we consider both the bending deformation of the beams and the hygro-thermal load as size-dependent,simultaneously,by adopting the equivalent differential forms of the well-posed nonlocal strain gradient integral theory(NSGIT)which are strictly equipped with a set of constitutive boundary conditions(CBCs),and through which both the stiffness-hardening and stiffness-softening effects of the structures can be observed with the length-scale parameters changed.All the variables presented in the differential problem formulation are discretized.The numerical solution of the dynamic instability region(DIR)of various bounded beams is then developed via the generalized differential quadrature method(GDQM).After verifying the present formulation and results,we examine the effects of different parameters such as the nonlocal/gradient length-scale parameters,the static force factor,the functionally graded(FG)parameter,and the porosity parameter on the DIR.Furthermore,the influence of considering the size-dependent hygro-thermal load is also presented.
基金Under the auspices of the Social Science Foundation of China (No. 40771059)Project of Key Research Institute of Humanities and Social Science of Anhui Provincial Education Department (No. 2008sk082rd)
文摘The grounded theory of qualitative methods was applied to researching the social integration of tourism la-bor migrants in the Jiuhua Mountain of Anhui Province, China. The research was conducted based on the in-depth in-terviewing of 15 samples, open-consultation and the analysis of secondhand data. The integration models of tourism labor migrants in the Jiuhua Mountain were formed through four processes including theoretic sampling, cod-ing-analysis, cross-tabulation and contextualization. The result shows that modes of production and life styles decide self-integration orientation of tourism labor migrants in the Jiuhua Mountain. Cultural differences are fundamental dis-similarity between tourism labor migrants and natives. There are three kinds of integration models including rapid, free and gradually advancing integration. The differences among different types of migrants’ integration models are re-markable. Taking the working integration as the abscissa and taking the life integration as the coordinate, an "S" model of integration matrix appears in the gradually advancing integration of intermediate and high administers from the working to the life which should be paid special attention to.
基金National Defense Science Foundation of China (No.B0920060901)
文摘Process integration is the important aspect of product development process. The recent researches focus on project management, workflow management and process modeling. Based on the analysis of the process, product development process is divided into three levels according to different grains from macroscopy to microcosm. Our research concentrate on the workflow and the free-grained design process. According to the need of representing the data and the relationships among them for process integration, context model is introduced, and its characters are analyzed. The tree-like structure of inheritance among context model's classes is illustrated; The relationships of reference among them are also explained. Then, extensible markup language (XML) file is used to depict these classes. A four-tier framework of process integration has been established, in which model-view-controller pattern is designed to realize the separation between context model and its various views. The integration of applications is applied by the encapsulation of enterprise's business logic as distributed services. The prototype system for the design of air filter is applied in an institute.
文摘The paradigm of extended enterprise is the core competency focused. An extended enterprise expands its scope from bounding a single enterprise to including additional processes performed by other enterprises. The integration of processes is enterprise based. This paper proposes a recursive enterprises interconnected chain model for the extended enterprise, and presents an enterprise-based integration framework for the extended enterprise. The case study is based on a motorcycle group corporation.
基金supported by the National Natural Science Foundation of China (Nos 40974066 and 40821062)National Basic Research Program of China (No 2007CB209602)
文摘General purpose graphic processing unit (GPU) calculation technology is gradually widely used in various fields. Its mode of single instruction, multiple threads is capable of seismic numerical simulation which has a huge quantity of data and calculation steps. In this study, we introduce a GPU-based parallel calculation method of a precise integration method (PIM) for seismic forward modeling. Compared with CPU single-core calculation, GPU parallel calculating perfectly keeps the features of PIM, which has small bandwidth, high accuracy and capability of modeling complex substructures, and GPU calculation brings high computational efficiency, which means that high-performing GPU parallel calculation can make seismic forward modeling closer to real seismic records.
基金Project(2001CB409809) supported by the National Key Foundmental Research and Development Program of Chinaproject(1042610) supported by the Key Program of the Education Ministry of China
文摘Prediction has become more and more difficult in mineral exploration, especially in the mature exploration environment such as Tongling copper district. For enhancing predictive discovery of hidden ore deposits in such mature environment, the key strategies which should be adopted include the innovation of the exploration models, application of the advanced exploration techniques and integration of multiple sets of information. The innovation of the exploration models should incorporate the new metallogenic concepts that are based on the geodynamic anatomization. The advanced techniques applied in the mature exploration environment should aim at the speciality and complexity of the geological setting and working environments. The information synthesis is to integrate multiple sets of data for giving a more credible and visual prospectivity map by using the geographic imformation system(GIS) and several mathematical methods, such as weight of evidence and fuzzy logic, which can extract useful information from every set of data as much as possible. Guided by these strategies, a predictive exploration in Fenghuangshan ore field of Tongling copper district was implemented, and a hidden ore deposit was discovered.
基金Projects(51605495,51575541)supported by the National Natural Science Foundation of ChinaProject(2015JJ2168)supported by the Natural Science Foundation of Hunan Province of China
文摘The 3D clearance of a high-speed train(HST) is critical to ensure the safety of railway transportation. Many studies have been conducted on the inspection of the clearance profile in railway operation based on the vision system, but few researchers have focused on the computation of the 3D clearance in the design phase of an HST. This paper summarizes the virtual 3D clearance computation of an HST based on model integration and the convex hull method. First, both the aerodynamic and kinetic analysis models of the HST are constructed. The two models are then integrated according to the corresponding relationship map, and an array of transformation matrixes of the HST is created to drive the designed model simulating the physical railway motion. Furthermore, the convex hull method is adopted to compute the 3D envelope of the moving train. Finally, the Hausdorff metric is involved in the measurement of the minimum clearance model and the 3D envelope model. In addition, the color map of the Hausdorff distance is established to verify that the designed shape of the HST meets the national standards. This paper provides an effective method to accurately calculate the 3D clearance for the shape design of an HST, which greatly reduces the development cost by minimizing the physical prototype that must be built.
基金Supported by the National Natural Science Foundation of China (No. 79931000) and The State Major Basic Research Development Program (No. G20000263).
文摘Towards integration of supply chain, manufacturing/production and investment decision making, this paper presents a hierarchical model architecture which contains six sub-models covering the areas of manufacturing control, production operation, design and revamp, production management, supply chain and investment decision making. Six types of flow, material, energy, information, humanware, partsware and capital are clasified. These flows connect enterprise components/subsystems to formulate system topology and logical structure. Enterprise components/subsystems are abstracted to generic elementary and composite classes. Finally, the model architecture is applied to a management system of an integrated suply chain, and suggestion are made on the usage of the model architecture and further development of the model as well as implementation issues.
文摘The globalization and the intensive competition of th e automotive market require shortening the product development cycle, improving the quality and reducing the cost. Optimizing the product development process, b uilding product’s consistent defining model for life cycle, and realizing the in tegration of CAD/CAM/CAE and Concurrent Engineering (CE) become the means to acc ept the challenge. A new product modeling technology, Multi Model Technology (MM T), is provided in this paper to meet the needs of the challenge for automotive powertrain product development. First, the paper introduces the concept of Multi Model Technology. MMT introduce s Object-oriented Technology (OT) into product modeling process and combine OT with feature-based modeling technology. With the help of OT, MMT builds product object model to support system level management in product development. The obj ect model of the product is a Multi Model Structure. The MMS consists of finish part model level (assembly model level), rough part model level (part model leve l), function model level and basic model level. Every models in the MMS is creat ed by feature-based technology in design process. In this case, models in the M MS of product can be shared by casting mould, sand core and sand core mould. The refore, CAD engineers, CAE engineers and CAM engineers can work concurrently and the integration of CAD/CAM/CAE can be realized. Second, MMT is applied in cylinder head development. The multi model structures of cylinder head, its casting mould, sand core and sand core mould are built, an d the process-oriented feature models of every objects in the multi model struc tures are modeled, the application of different model objects in development pro cess is analyzed. The integrated modeling technology of cylinder head, its casti ng mould, sand core and sand core mould under MMT is studied. And the concurrent engineering oriented integration method of CAD/CAE and the method to realize th e integration of CAD/CAE under MMT are also discussed. Based on above, the integ ration of CAD/CAM/CAE of cylinder head is realized in automotive powertrain prod uct. The practice results shows that the modeling technology in this paper can optimi ze the development process, realize the data sharing and concurrent engineering in the product development process.
基金Supported by the National Natural Science Foundation of China(61502257,41304031)
文摘The conventional Kalman filter(CKF)is widely used in tightly-coupled INS/GPS integrated navigation systems.The linearization accuracy of the CKF observation model is one of the decisive factors of the estimation accuracy and therefore navigation accuracy.Additionally,the conventional observation model(COM)used by the filter may be divergent,which would result into some terrible accuracies of INS/GPS integration navigation in some cases.To improve the navigation accuracy,the linearization accuracy of the COM still needs further improvement.To deal with this issue,the observation model is modified with the linearization of the range and range rate equations in this paper.Compared with COM,the modified observation model(MOM)further considers the difference between the real user position and the position calculated by SINS.To verify the advantages of this model,INS/GPS integrated navigation simulation experiments are conducted with the usage of COM and MOM respectively.According to the simulation results,the positions(velocities)calculated using COM are divergent over time while the others using MOM are convergent,which demonstrates the higher linearization accuracy of MOM.
文摘Lie symmetry analysis is applied to a(3+1)-dimensional Virasoro integrable model and the corresponding similarity reduction equations are obtained with the different infinitesimal generators.Invariant solutions with arbitrary functions for the(3+1)-dimensional Virasoro integrable model,including the interaction solution between a kink and a soliton,the lump-type solution and periodic solutions,have been studied analytically and graphically.