Ultrasonic Lamb waves are considered as a sensitive and effective tool for nondestructive testing and evaluation of plate-like or pipe-like structures. The nature of multimode and dispersion causes the wave packets to...Ultrasonic Lamb waves are considered as a sensitive and effective tool for nondestructive testing and evaluation of plate-like or pipe-like structures. The nature of multimode and dispersion causes the wave packets to spread, and the modes overlap in both time and frequency domains as they propagate through the structures. By using a two-component laser interferometer technique, in combination with a priori knowledge of the dispersion characteristics and wave structure information of Lamb wave modes, a two-component signal processing technique is presented for implementing dispersion removal and mode separation simultaneously for two modes mixture signals of Lamb waves. The proposed algorithm is first processed and verified using synthetic Lamb wave signals. Then, the two-component displacements test experiment is conducted using different aluminum plate samples. Moreover, we confirm the effectiveness and robustness of this method.展开更多
To effectively obtain the downforce of the gauge wheels in real time,mechanical models of the interaction among the ground,gauge wheels,gauge wheel arms,and depth adjustment lever were constructed.A measuring method w...To effectively obtain the downforce of the gauge wheels in real time,mechanical models of the interaction among the ground,gauge wheels,gauge wheel arms,and depth adjustment lever were constructed.A measuring method was proposed for monitoring the downforce through a two-dimensional radial sensing device,and a corresponding prototype was designed.Through simulation analysis of the sensing device with ANSYS,a 45°angle was determined to exist between the strain gauge axis and the sensing device axis,and the Wheatstone bridging circuit of R1+R3−R5−R7(R stands for resistance strain gauge,different figures represent the strain gauge number)and R2+R4−R6−R8 was adopted.According to performance and calibration tests for the sensing device,the maximum interaction effect between the X and Y axes was 2.52%,and the output signal was stable and consistent.The standard error of the slope of the fitting equation of the downforce calculation model is 0.008.According to the field test,the average downforce of the gauge wheels was 1148,1017,843,and 713 N,at different sowing speeds of 6,8,10,and 12 km/h,respectively.The coefficients of variation were 0.40,0.41,0.62,and 0.71,respectively.The results indicate that the downforce fluctuation of the gauge wheels became more severe with increasing planting speed.Both the strain simulation analysis and field test verified that the measurement method is accurate and reliable,the performance of the sensing device is stable,the measurement method and sensing device meet the application requirements and lay a foundation for the research of accurate and stable control of downforce of no-till planter.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.11374230)
文摘Ultrasonic Lamb waves are considered as a sensitive and effective tool for nondestructive testing and evaluation of plate-like or pipe-like structures. The nature of multimode and dispersion causes the wave packets to spread, and the modes overlap in both time and frequency domains as they propagate through the structures. By using a two-component laser interferometer technique, in combination with a priori knowledge of the dispersion characteristics and wave structure information of Lamb wave modes, a two-component signal processing technique is presented for implementing dispersion removal and mode separation simultaneously for two modes mixture signals of Lamb waves. The proposed algorithm is first processed and verified using synthetic Lamb wave signals. Then, the two-component displacements test experiment is conducted using different aluminum plate samples. Moreover, we confirm the effectiveness and robustness of this method.
基金supported by the State’s Key Project of Research and Development Plan of China(Grant No.2021YFD2000401)the Heilongjiang Province Engineering Science and Technology Major Project of China(Grant No.2020ZX17B01)the National Modern Agricultural Industry Technology System Project(Grant No.GARS-04).
文摘To effectively obtain the downforce of the gauge wheels in real time,mechanical models of the interaction among the ground,gauge wheels,gauge wheel arms,and depth adjustment lever were constructed.A measuring method was proposed for monitoring the downforce through a two-dimensional radial sensing device,and a corresponding prototype was designed.Through simulation analysis of the sensing device with ANSYS,a 45°angle was determined to exist between the strain gauge axis and the sensing device axis,and the Wheatstone bridging circuit of R1+R3−R5−R7(R stands for resistance strain gauge,different figures represent the strain gauge number)and R2+R4−R6−R8 was adopted.According to performance and calibration tests for the sensing device,the maximum interaction effect between the X and Y axes was 2.52%,and the output signal was stable and consistent.The standard error of the slope of the fitting equation of the downforce calculation model is 0.008.According to the field test,the average downforce of the gauge wheels was 1148,1017,843,and 713 N,at different sowing speeds of 6,8,10,and 12 km/h,respectively.The coefficients of variation were 0.40,0.41,0.62,and 0.71,respectively.The results indicate that the downforce fluctuation of the gauge wheels became more severe with increasing planting speed.Both the strain simulation analysis and field test verified that the measurement method is accurate and reliable,the performance of the sensing device is stable,the measurement method and sensing device meet the application requirements and lay a foundation for the research of accurate and stable control of downforce of no-till planter.
