Correlation between the rock mass properties and maximum horizontal stress:A case study of overcoring stress measurements

Understanding the mechanical properties of the lithologies is crucial to accurately determine the horizontal stress magnitude.To investigate the correlation between the rock mass properties and maximum horizontal stress,the three-dimensional(3D)stress tensors at 89 measuring points determined using an improved overcoring technique in nine mines in China were adopted,a newly defined characteristic parameter C_(ERP)was proposed as an indicator for evaluating the structural properties of rock masses,and a fuzzy relation matrix was established using the information distribution method.The results indicate that both the vertical stress and horizontal stress exhibit a good linear growth relationship with depth.There is no remarkable correlation between the elastic modulus,Poisson's ratio and depth,and the distribution of data points is scattered and messy.Moreover,there is no obvious relationship between the rock quality designation(RQD)and depth.The maximum horizontal stress σ_(H) is a function of rock properties,showing a certain linear relationship with the C_(ERP)at the same depth.In addition,the overall change trend of σ_(H) determined by the established fuzzy identification method is to increase with the increase of C_(ERP).The fuzzy identification method also demonstrates a relatively detailed local relationship betweenσ_H and C_(ERP),and the predicted curve rises in a fluctuating way,which is in accord well with the measured stress data.

Confirmatory factor analysis of VISA-P scale and measurement invariance across sexes in athletes with patellar tendinopathy

Background:The Victorian Institute of Sport Assessment–Patella(VISA-P) scale is the most condition-specific patient-reported outcome measure used to assess symptom severity in athletes with patellar tendinopathy.Previous exploratory factor analyses have been conducted to evaluate the scale's dimensionality,with inconsistent results,and the factor structure of the scale remains unclear.The aims of the present study were to determine the factorial structure of the VISA-P scale using confirmatory factor analysis(CFA) and test measurement invariance across sexes.Methods:The study included a convenience sample of 249 Spanish athletes with patellar tendinopathy.CFA was performed to assess factorial validity.Hypothesized 1-and 2-factor models were tested.Measurement invariance across sexes was evaluated via multi-group CFA with several fit indices using EQS 6.1 software.Results:The internal consistency coefficient was 0.74.Several CFA models were examined and the 1-factor model in which errors for Items 7 and8 were correlated showed acceptable fit in terms of comparative fit index(CFI) and goodness-of-fit index(GFI) statistics(CFI = 0.93;GFI = 0.94;standardized root mean square residual = 0.06;root mean square error of approximation = 0.10;90% confidence interval:0.08–0.13).This model was invariant across sexes.Conclusion:The 1-factor model of the Spanish version of the VISA-P scale(VISA-P-Sp) in which errors for Items 7 and 8 were correlated demonstrated relative fit in CFA.Scores obtained via VISA-P-Sp can be compared between men and women without sexes bias.Further studies should examine the VISA-P scale and other single-score patient-reported outcome measures concurrently.

Measurement invariance and latent mean differences of the Chinese version physical activity self-efficacy scale across gender and education levels

Background: Self-efficacy has been identified as an important determinant of youth's behavior change including physical activity(PA) participation. However, the dimensionality check of a PA self-efficacy scale has rarely been conducted in China. The current study aims to examine(1) the unidimensionality of a shortened Chinese version of PA self-efficacy scale(S-PASESC);(2) the measurement invariance of S-PASESC across gender and levels of education;(3) the latent factor mean difference between gender and levels of education;(4) the direct effects of self-efficacy on PA by different gender and education levels; and(5) the comparisons of the direct effects of self-efficacy on PA across gender and education levels.Methods: The participants were 5 th through 11 th grade public school students recruited from 7 cities located in different geographic regions of China. The final data include a total of 3003 participants(49.7% boys) who have completed the scales.Results: Confirmatory factor analysis(CFA) test supported the unidimensionality of S-PASESC. The S-PASESC is invariant across gender and 3 levels of education at both configural, full metric, and full scalar levels. Findings from latent mean comparisons showed that boys reported higher PA self-efficacy than girls. Students' perceived PA self-efficacy tend to decrease from elementary to high school. Finally, self-efficacy positively related to PA by groups of different gender and education levels and the relationship between self-efficacy and PA is stronger among middle school boys than girls.Conclusion: Findings suggest S-PASESC is a valid scale for measuring Chinese students' PA self-efficacy.

A Cross-cultural Examination of the Noise-sensitivity Scale-short Form:Measurement Invariance Testing between the US and Chinese Samples

Unwanted sound that is unpleasant or disruptive to hear, often interpreted as noise, is a widespread environmental pollutant. Similar to other environmental pollutants, this noise incurs a variety of costs to society. Numerous negative health impacts are linked to increases in noise exposure,such as increased cardiovascular risk;and sleep

Factor Structure and Measurement Invariance of the Prenatal Attachment Inventory: A Study among Japanese Pregnant Women

Background: Maternal emotional tie towards a foetus is a predictor of later maternal and child’s mental health. Methods: A questionnaire survey was conducted among 539 first trimester women. It included the Prenatal Attachment Inventory (PAI), Relationship Questionnaire (RQ), and Edinburgh Postnatal Depression Scale (EPDS). The factor structure models derived from exploratory factor analyses were compared by confirmatory factor analyses. Results: A three-factor bifactor model of the PAI was bet fit to the data. The omega coefficients and explained common variance suggested that the influences of three group factors were not negligible. The scores of the three subscales (derived from the three factors) were differently associated with age, gestation week, and adult attachment styles (derived from RQ). They were, however, not correlated with the EPDS scores. Conclusion: The PAI has a model of three groups and one general factor with an excellent fit to the data. The three subscales have construct validity too.

Factor Structure and Measurement Invariance of the Japanese Version of the Mother-to-Infant Bonding Scale

Background: Bonding disorders affect the growth and development of infants. In Japan, the Japanese version of the Mother-to-Infant Bonding Scale (MIBS-J) is widely used for early detection of bonding disorders. Repeated use of a questionnaire has problems of reduced validity. In order to correctly detect bonding disorders at multiple time points, it is necessary to confirm the measurement invariance of the scale. Baba et al. reported that invariance of the MIBS-J factor structure could only be obtained by abridging the scale into three items. Purpose: The aim of this study was to 1) confirm the factor structure and measurement invariance of the MIBS-J between two measurement times and 2) to examine factors that can be used without being affected by measurement time in order to identify item that contribute to measure met invariance. Methods: We analysed the data of 1049 and 878 mothers with a neonate collected in two waves: 5 days (Wave 1) and 1 month postpartum (Wave 2). Exploratory and confirmatory factor analyses were conducted on the data randomly divided into two groups in each wave. Results: The three-item model (MIBS-J items 1, 6, and 8) was most accepted. Measurement invariance and structural invariance were confirmed in the model. This was consistent with Baba et al.’s model. Conclusion: The three MIBS-J items showed measurement invariance and structural invariance in Japanese mothers during 1 month postpartum.

Factor Structure and Longitudinal Invariance of the CES-D across Diverse Residential Backgrounds in Chinese Adolescents

Background:Valid and reliable measures of depressive symptoms are crucial for understanding risk factors,outcomes,and interventions across rural and urban settings.Despite this need,the longitudinal invariance of these measures over time remains understudied.This research explores the structural components of the Center for Epidemiological Studies Depression Scale(CES-D)and examines its consistency across various living environments and temporal stability in a cohort of Chinese teenagers.Method:In the initial phase,1,042 adolescents furnished demographic details and undertook the CES-D assessment.After a three-month interval,967 of these participants repeated the CES-D evaluation.The study employed Confirmatory factor analysis(CFA)to scrutinize the scale’s structural integrity.We investigated factorial invariance by conducting a twopronged CFA:one comparing urban vs.rural backgrounds,and another contrasting the results from the initial assessment with those from the follow-up.Results:The CES-D demonstrated adequate reliability in both rural and urban high school student samples.The preliminary four-factor model applied to the CES-D demonstrated a good fit with the collected data.Invariance tests,including multigroup analyses comparing rural and urban samples and longitudinal assessments,confirmed the scale’s invariance.Conclusions:The results suggest that the CES-D serves as a reliable instrument for evaluating depressive symptoms among Chinese adolescents.Its applicability is consistent across different living environments and remains stable over time.

Measurement invariance of maternal ratings of ADHD symptoms across clinic referred children’s with and without ADHD

The study examined the measurement invariance (configural,metric,scalar,and error variances) and factor mean scores equivalencies of a modified version of the Strengths and Weaknesses of ADHDSymptoms and Normal Behavior Scale (SWAN-M) across ratings provided by mothers of clinic-referred children and adolescents,diagnosed with (N = 666) and without (N = 202) ADHD. Confirmatory factor analysis (CFA) of these ratings provided support for the bi-factor model of ADHD [orthogonal general and specific factors for inattention (IA) and hyperactivity/impulsivity (HI) symptoms]. Multiple-group confirmatory factor analysis (CFA) of the bi-factor model supported full measurement invariance. Findings also showed that for latent mean scores,the ADHD group had higher scores than the non-ADHD group for the ADHD general and IA specific factors. The findings indicate that observed scores (based on maternal ratings of the SWAN-M) are comparable,as they have the same measurement properties. The theoretical,psychometric and clinical implications of the findings are discussed.

Strong invariance principle for a counterbalanced random walk

We study a counterbalanced random walkS_(n)=X_(1)+…+X_(n),which is a discrete time non-Markovian process andX_(n) are given recursively as follows.For n≥2,X_(n) is a new independent sample from some fixed law̸=0 with a fixed probability p,andX_(n)=−X_(v(n))with probability 1−p,where v(n)is a uniform random variable on{1;…;n−1}.We apply martingale method to obtain a strong invariance principle forS_(n).

Influence of sampling on three-dimensional surface shape measurement

In order to accurately measure an object’s three-dimensional surface shape,the influence of sampling on it was studied.First,on the basis of deriving spectra expressions through the Fourier transform,the generation of CCD pixels was analyzed,and its expression was given.Then,based on the discrete expression of deformation fringes obtained after sampling,its Fourier spectrum expression was derived,resulting in an infinitely repeated"spectra island"in the frequency domain.Finally,on the basis of using a low-pass filter to remove high-order harmonic components and retaining only one fundamental frequency component,the inverse Fourier transform was used to reconstruct the signal strength.A method of reducing the sampling interval,i.e.,reducing the number of sampling points per fringe,was proposed to increase the ratio between the sampling frequency and the fundamental frequency of the grating.This was done to reconstruct the object’s surface shape more accurately under the condition of m>4.The basic principle was verified through simulation and experiment.In the simulation,the sampling intervals were 8 pixels,4 pixels,2 pixels,and 1 pixel,the maximum absolute error values obtained in the last three situations were 88.80%,38.38%,and 31.50%in the first situation,respectively,and the corresponding average absolute error values are 71.84%,43.27%,and 32.26%.It is demonstrated that the smaller the sampling interval,the better the recovery effect.Taking the same four sampling intervals in the experiment as in the simulation can also lead to the same conclusions.The simulated and experimental results show that reducing the sampling interval can improve the accuracy of object surface shape measurement and achieve better reconstruction results.

Bunch-length measurement at a bunch-by-bunch rate based on time–frequency-domain joint analysis techniques and its application

This paper presents a new technique for measuring the bunch length of a high-energy electron beam at a bunch-by-bunch rate in storage rings.This technique uses the time–frequency-domain joint analysis of the bunch signal to obtain bunch-by-bunch and turn-by-turn longitudinal parameters,such as bunch length and synchronous phase.The bunch signal is obtained using a button electrode with a bandwidth of several gigahertz.The data acquisition device was a high-speed digital oscilloscope with a sampling rate of more than 10 GS/s,and the single-shot sampling data buffer covered thousands of turns.The bunch-length and synchronous phase information were extracted via offline calculations using Python scripts.The calibration coefficient of the system was determined using a commercial streak camera.Moreover,this technique was tested on two different storage rings and successfully captured various longitudinal transient processes during the harmonic cavity debugging process at the Shanghai Synchrotron Radiation Facility(SSRF),and longitudinal instabilities were observed during the single-bunch accumulation process at Hefei Light Source(HLS).For Gaussian-distribution bunches,the uncertainty of the bunch phase obtained using this technique was better than 0.2 ps,and the bunch-length uncertainty was better than 1 ps.The dynamic range exceeded 10 ms.This technology is a powerful and versatile beam diagnostic tool that can be conveniently deployed in high-energy electron storage rings.

A New Device for Gas-Liquid Flow Measurements Relying on Forced Annular Flow

A new measurement device,consisting of swirling blades and capsule-shaped throttling elements,is proposed in this study to eliminate typical measurement errors caused by complex flow patterns in gas-liquid flow.The swirling blades are used to transform the complex flow pattern into a forced annular flow.Drawing on the research of existing blockage flow meters and also exploiting the single-phase flow measurement theory,a formula is introduced to measure the phase-separated flow of gas and liquid.The formula requires the pressure ratio,Lockhart-Martinelli number(L-M number),and the gas phase Froude number.The unknown parameters appearing in the formula are fitted through numerical simulation using computational fluid dynamics(CFD),which involves a comprehensive analysis of the flow field inside the device from multiple perspectives,and takes into account the influence of pressure fluctuations.Finally,the measurement model is validated through an experimental error analysis.The results demonstrate that the measurement error can be maintained within±8%for various flow patterns,including stratified flow,bubble flow,and wave flow.

Enhancing Energy Efficiency with a Dynamic Trust Measurement Scheme in Power Distribution Network

The application of Intelligent Internet of Things(IIoT)in constructing distribution station areas strongly supports platform transformation,upgrade,and intelligent integration.The sensing layer of IIoT comprises the edge convergence layer and the end sensing layer,with the former using intelligent fusion terminals for real-time data collection and processing.However,the influx of multiple low-voltage in the smart grid raises higher demands for the performance,energy efficiency,and response speed of the substation fusion terminals.Simultaneously,it brings significant security risks to the entire distribution substation,posing a major challenge to the smart grid.In response to these challenges,a proposed dynamic and energy-efficient trust measurement scheme for smart grids aims to address these issues.The scheme begins by establishing a hierarchical trust measurement model,elucidating the trust relationships among smart IoT terminals.It then incorporates multidimensional measurement factors,encompassing static environmental factors,dynamic behaviors,and energy states.This comprehensive approach reduces the impact of subjective factors on trust measurements.Additionally,the scheme incorporates a detection process designed for identifying malicious low-voltage end sensing units,ensuring the prompt identification and elimination of any malicious terminals.This,in turn,enhances the security and reliability of the smart grid environment.The effectiveness of the proposed scheme in pinpointing malicious nodes has been demonstrated through simulation experiments.Notably,the scheme outperforms established trust metric models in terms of energy efficiency,showcasing its significant contribution to the field.

Measuring small longitudinal phase shifts via weak measurement amplification

Weak measurement amplification,which is considered as a very promising scheme in precision measurement,has been applied to various small physical quantities estimations.Since many physical quantities can be converted into phase signals,it is interesting and important to consider measuring small longitudinal phase shifts by using weak measurement.Here,we propose and experimentally demonstrate a novel weak measurement amplification-based small longitudinal phase estimation,which is suitable for polarization interferometry.We realize one order of magnitude amplification measurement of a small phase signal directly introduced by a liquid crystal variable retarder and show that it is robust to the imperfection of interference.Besides,we analyze the effect of magnification error which is never considered in the previous works,and find the constraint on the magnification.Our results may find important applications in high-precision measurements,e.g.,gravitational wave detection.

Research progress on micro-force measurement of a hydrate particle system

It remains a great challenge to understand the hydrates involved in phenomena in practical oil and gas systems.The adhesion forces between hydrate particles,between hydrate particles and pipe walls,and between hydrate particles and reservoir particles are essential factors that control the behaviors of clathrate hydrates in different applications.In this review,we summarize the typical micro-force measurement apparatus and methods utilized to study hydrate particle systems.In addition,the adhesion test results,the related understandings,and the applied numerical calculation models are systematically discussed.

Improved spatio-temporal alignment measurement method for hull deformation

In this paper,an improved spatio-temporal alignment measurement method is presented to address the inertial matching measurement of hull deformation under the coexistence of time delay and large misalignment angle.Large misalignment angle and time delay often occur simultaneously and bring great challenges to the accurate measurement of hull deformation in space and time.The proposed method utilizes coarse alignment with large misalignment angle and time delay estimation of inertial measurement unit modeling to establish a brand-new spatiotemporal aligned hull deformation measurement model.In addition,two-step loop control is designed to ensure the accurate description of dynamic deformation angle and static deformation angle by the time-space alignment method of hull deformation.The experiments illustrate that the proposed method can effectively measure the hull deformation angle when time delay and large misalignment angle coexist.

Unknown Environment Measurement Mapping by Unmanned Aerial Vehicle Using Kalman Filter-Based Low-Cost Estimated Parallel 8-Beam LIDAR

The measurement and mapping of objects in the outer environment have traditionally been conducted using ground-based monitoring systems,as well as satellites.More recently,unmanned aerial vehicles have also been employed for this purpose.The accurate detection and mapping of a target such as buildings,trees,and terrains are of utmost importance in various applications of unmanned aerial vehicles(UAVs),including search and rescue operations,object transportation,object detection,inspection tasks,and mapping activities.However,the rapid measurement and mapping of the object are not currently achievable due to factors such as the object’s size,the intricate nature of the sites,and the complexity of mapping algorithms.The present system introduces a costeffective solution for measurement and mapping by utilizing a small unmanned aerial vehicle(UAV)equipped with an 8-beam Light Detection and Ranging(LiDAR)system.This approach offers advantages over traditional methods that rely on expensive cameras and complex algorithm-based approaches.The reflective properties of laser beams have also been investigated.The system provides prompt results in comparison to traditional camerabased surveillance,with minimal latency and the need for complex algorithms.The Kalman estimation method demonstrates improved performance in the presence of noise.The measurement and mapping of external objects have been successfully conducted at varying distances,utilizing different resolutions.

Measurement and Analysis of Vibration Effect of Free-falling Corner Cube Driving Mechanism in Free Fall Absolute Gravimeter

The vibration interference of the reference corner cube runs through the free flight process of the free-falling corner cube,which is superimposed on the whole laser interference fringes.Thus,it is necessary to solve the interference fringes with the entire fringe to analyze the quantitative influence of vibration on gravity measurements.

Design and application of thickness measurement calibration system based on laser displacement sensor

This study aims to improve the accuracy and safety of steel plate thickness calibration.A differential noncontact thickness measurement calibration system based on laser displacement sensors was designed to address the problems of low precision of traditional contact thickness gauges and radiation risks of radiation-based thickness gauges.First,the measurement method and measurement structure of the thickness calibration system were introduced.Then,the hardware circuit of the thickness system was established based on the STM32 core chip.Finally,the system software was designed to implement system control to filter algorithms and human-computer interaction.Experiments have proven the excellent performance of the differential noncontact thickness measurement calibration system based on laser displacement sensors,which not only considerably improves measurement accuracy but also effectively reduces safety risks during the measurement process.The system offers guiding significance and application value in the field of steel plate production and processing.

A fast forward computational method for nuclear measurement using volumetric detection constraints

Owing to the complex lithology of unconventional reservoirs,field interpreters usually need to provide a basis for interpretation using logging simulation models.Among the various detection tools that use nuclear sources,the detector response can reflect various types of information of the medium.The Monte Carlo method is one of the primary methods used to obtain nuclear detection responses in complex environments.However,this requires a computational process with extensive random sampling,consumes considerable resources,and does not provide real-time response results.Therefore,a novel fast forward computational method(FFCM)for nuclear measurement that uses volumetric detection constraints to rapidly calculate the detector response in various complex environments is proposed.First,the data library required for the FFCM is built by collecting the detection volume,detector counts,and flux sensitivity functions through a Monte Carlo simulation.Then,based on perturbation theory and the Rytov approximation,a model for the detector response is derived using the flux sensitivity function method and a one-group diffusion model.The environmental perturbation is constrained to optimize the model according to the tool structure and the impact of the formation and borehole within the effective detection volume.Finally,the method is applied to a neutron porosity tool for verification.In various complex simulation environments,the maximum relative error between the calculated porosity results of Monte Carlo and FFCM was 6.80%,with a rootmean-square error of 0.62 p.u.In field well applications,the formation porosity model obtained using FFCM was in good agreement with the model obtained by interpreters,which demonstrates the validity and accuracy of the proposed method.