The numerical moire method with sensitivity as high as 0.03 nm has been presented. A quantitative displacement and strain analysis program has been proposed by using this method. It is applied to an edge dislocation a...The numerical moire method with sensitivity as high as 0.03 nm has been presented. A quantitative displacement and strain analysis program has been proposed by using this method. It is applied to an edge dislocation and a stacking fault in aluminum. The measured strain of edge dislocation is compared with theoretical prediction given by Peierls-Nabarro dislocation model. The displacement of stacking fault is also obtained.展开更多
We propose a novel system for synchronous measurement of out-of-plane deformation and two orthogonal slopes using a single camera. The linearly polarized reference beam introduced by an optical fiber interferes with t...We propose a novel system for synchronous measurement of out-of-plane deformation and two orthogonal slopes using a single camera. The linearly polarized reference beam introduced by an optical fiber interferes with the unpolarized object beam to measure the out-of-plane deformation. A modified Mach–Zehnder interferometer is used to measure the two orthogonal slopes of the out-of-plane deformation. One of the object beams of the Mach–Zehnder interferometer is an unpolarized beam, and the other object beam is split into two orthogonal linearly polarized object beams by a polarizing prism. The two beams are orthogonally polarized. Hence, they will not interfere with each other. The two polarized beams respectively interfere with the unpolarized beam to simultaneously measure the two orthogonal slopes of the out-of-plane deformation. In addition, the imaging lens and apertures are respectively placed in three optical paths to independently control the carrier frequencies and shearing amounts. The effectiveness of this method can be proved by measuring two pressure-loaded circular plates.展开更多
基金the National Natural Science Foundation of China under Grants No.10562003 and 10272054
文摘The numerical moire method with sensitivity as high as 0.03 nm has been presented. A quantitative displacement and strain analysis program has been proposed by using this method. It is applied to an edge dislocation and a stacking fault in aluminum. The measured strain of edge dislocation is compared with theoretical prediction given by Peierls-Nabarro dislocation model. The displacement of stacking fault is also obtained.
基金Project supported by the National Key Research and Development Program of China (Grant No. 2016YFF0101803)the Hefei Municipal Natural Science Foundation (Grant No. 2021017)the Fundamental Research Funds for the Central Universities of China (Grant No. JZ2019HGTB0076)。
文摘We propose a novel system for synchronous measurement of out-of-plane deformation and two orthogonal slopes using a single camera. The linearly polarized reference beam introduced by an optical fiber interferes with the unpolarized object beam to measure the out-of-plane deformation. A modified Mach–Zehnder interferometer is used to measure the two orthogonal slopes of the out-of-plane deformation. One of the object beams of the Mach–Zehnder interferometer is an unpolarized beam, and the other object beam is split into two orthogonal linearly polarized object beams by a polarizing prism. The two beams are orthogonally polarized. Hence, they will not interfere with each other. The two polarized beams respectively interfere with the unpolarized beam to simultaneously measure the two orthogonal slopes of the out-of-plane deformation. In addition, the imaging lens and apertures are respectively placed in three optical paths to independently control the carrier frequencies and shearing amounts. The effectiveness of this method can be proved by measuring two pressure-loaded circular plates.
