In this paper, to meet the needs of studying work of dynamic mechanical properties of welded joint, the dynamic mechanical properties of welded joint were measured by means of SHPB(Split Hopkinson Pressure Bar).The dy...In this paper, to meet the needs of studying work of dynamic mechanical properties of welded joint, the dynamic mechanical properties of welded joint were measured by means of SHPB(Split Hopkinson Pressure Bar).The dynamic mechanical property's curves of every part of welded joint were obtained. For studying the dynamic behavior of mechanical heterogeneity of welded joint, important data were offered. The method of test creates a new way of studying dynamic mechanical properties of welded joint.展开更多
A measuring system for high-speed hydrogen ice pellet was introduced in this paper and the photographing of flying pellet taken therein. With the system, a pellet (minimum size of φ 0.3 mm) velocity (ranging from 50 ...A measuring system for high-speed hydrogen ice pellet was introduced in this paper and the photographing of flying pellet taken therein. With the system, a pellet (minimum size of φ 0.3 mm) velocity (ranging from 50 m/s to 2500 m/s) can be measured in the HL-1M tokamak fueling experiments. By analyzing photographs and the conditions of frozen pellets (including gas supply, gas replenishment, temperature controlling etc), the pellet-freezing technology is summarized in the paper.展开更多
Objective To discuss the measurement of bone tumor volume on the basis of three dimensional images segmentation technology. Methods Twenty patients with lacunar bone tumor from Tianjin Hospital and Tongji Hospital wer...Objective To discuss the measurement of bone tumor volume on the basis of three dimensional images segmentation technology. Methods Twenty patients with lacunar bone tumor from Tianjin Hospital and Tongji Hospital were included in the展开更多
I. Increase in Human Activity and Occurrence of Geological Disasters "A geological disaster is a natural disaster that happens in a geo- logical environment. It is a geological effect (phenomenon) caused or in- flu...I. Increase in Human Activity and Occurrence of Geological Disasters "A geological disaster is a natural disaster that happens in a geo- logical environment. It is a geological effect (phenomenon) caused or in- fluenced by Nature and (or) human factors that leads to losses to human life, property and the environment.TM Based on their cause, geological disasters can be divided into natural geological and artificial geological disasters. Natural geological disas- ters include those caused by natural effects. These include typhoons, rain- fall, melting snow and earthquakes,展开更多
In order to further adapt to the task requirements for rapid testing and high-density launches,the LM-5 series of rocket boosters have adopted an automated acquisition and measurement process for key parameters such a...In order to further adapt to the task requirements for rapid testing and high-density launches,the LM-5 series of rocket boosters have adopted an automated acquisition and measurement process for key parameters such as the weight and centroid of the launch vehicle.A fully automatic rapid measurement technology for the weight characteristics of the rocket,consisting of a measurement system,a control system,an execution system,and a data processing system,has been developed and incorporated.This does not just achieve the adjustment of the overall assembly attitude of the rocket body and the measurement of the center of mass,but also greatly reduces the workload in the traditional measurement operations such as for assembly erection and rail transfer.Thus improving the general convenience,while greatly improving the reliability and measurement accuracy of product installation,which further promotes the popularization of an intelligent measurement technology application.展开更多
In this paper, we present simultaneous multiple pollutant gases (CO2, CO, and NO) measurements by using the non-dispersive infrared (NDIR) technique. A cross-correlation correction method is proposed and used to c...In this paper, we present simultaneous multiple pollutant gases (CO2, CO, and NO) measurements by using the non-dispersive infrared (NDIR) technique. A cross-correlation correction method is proposed and used to correct the cross-interferences among the target gases. The calculation of calibration curves is based on least-square fittings with third-order polynomials, and the interference functions are approximated by linear curves. The pure absorbance of each gas is obtained by solving three simultaneous equations using the fitted interference functions. Through the interference correction, the signal created at each filter channel only depends on the absorption of the intended gas. Gas mixture samples with different concentrations of CO2, CO, and NO are pumped into the sample cell for analysis. The results show that the measurement error of each gas is less than 4.5%.展开更多
The work of quantitative studying the effect of technological progress on economic growth, being of great complexity and far-reaching significance, has become a quite popular research topic in the world. In recent yea...The work of quantitative studying the effect of technological progress on economic growth, being of great complexity and far-reaching significance, has become a quite popular research topic in the world. In recent years there are a large number of scientists who are engaged in this research both at home and abroad.展开更多
Based on structured-light vision measurement technology, we study a measuring method for microdiameter. The measurement principle and mathematical model are described. A novel grayscale barycenter extraction algorithm...Based on structured-light vision measurement technology, we study a measuring method for microdiameter. The measurement principle and mathematical model are described. A novel grayscale barycenter extraction algorithm along the radial direction is proposed, which can precisely gather the image coor- dinates of the ellipse-shaped light-stripe centers. The accuracy of the measurement result shows marked improvement by using the algorithm. The method executes circle fitting to the measured three-dimensional (3D) data using linear least square method, which can acquire the diameter, surface profile, and other information of the object effectively. On the scene, a line-structured light vision system using the presented method is applied to measure the curvature radius of metal blades. Experimental results show that the measurement precision of the system is higher than 2 μm.展开更多
Aiming at the problem that the lattice feature exceeds the view field of the scanning electron microscope(SEM)measuring system,a new lattice measuring method is proposed based on integral imaging technology.When the s...Aiming at the problem that the lattice feature exceeds the view field of the scanning electron microscope(SEM)measuring system,a new lattice measuring method is proposed based on integral imaging technology.When the system works,the SEM measuring system is equivalent to an integral image acquisition system.Firstly,a lattice measuring method is researched based on integral imaging theory.Secondly,the system parameters are calibrated by the VLSI lattice standard.Finally,the value of the lattice standard to be tested is determined based on the calibration parameters and the lattice measuring algorithm.The experimental results show that,compared with the traditional electron microscope measurement method,the relative error of the measured value of the algorithm is maintained within 0.2%,with the same level of measurement accuracy,but it expands the field of view of the electron microscope measurement system,which is suitable for the measurement of samples under high magnification.展开更多
Currently,direct braking-force measurement under dynamic conditions requires a considerable modification to the vehicles and has poor compatibility because there are many types of vehicles.Thus,in this paper,an indire...Currently,direct braking-force measurement under dynamic conditions requires a considerable modification to the vehicles and has poor compatibility because there are many types of vehicles.Thus,in this paper,an indirect measurement method of new-energy vehicles,braking force under dynamic braking conditions is proposed.The mechanical wheel and axle model at low/idling/high speeds is established using the piston-pressure formula,force transfer in the brake-wheel cylinder,relative movement between the wheel and the roller,among others.On this basis,the relationship between wheel braking force and roller-linear acceleration is further derived.Our method does not alter existing vehicle structures or sensor types.The standard sealing bolt is temporarily replaced with a hydraulic sensor for coefficient calibration.Afterward,the braking force can be indirectly calculated using the roller-linear velocity data.The method has characteristics of efficiency and high accuracy without refitting vehicles.展开更多
The creation of a suitable wide area monitoring system(WAMS) is widely recognized as an essential aspect of delivering a power system that will be secure,efficient and sustainable for the foreseeable future. In Great ...The creation of a suitable wide area monitoring system(WAMS) is widely recognized as an essential aspect of delivering a power system that will be secure,efficient and sustainable for the foreseeable future. In Great Britain(GB), the deployment of the first WAMS to monitor the entire power system in real time was the responsibility of the visualization of real time system dynamics using enhanced monitoring(VISOR) project. The core scope of the VISOR project is to deploy this WAMS and demonstrate how WAMS applications can in the near term provide system operators and planners with clear, actionable information. This paper presents the wider scope of the VISOR project and the GB wide WAMS that has been deployed. Furthermore, the paper describes some of the WAMS applications that have been deployed and provides examples of the measurement device performance issues that have been encountered during the project.展开更多
This paper describes the analysis and design of an assistive device for elderly people under development at the EgyptJapan University of Science and Technology(E-JUST) named E-JUST assistive device(EJAD).Several e...This paper describes the analysis and design of an assistive device for elderly people under development at the EgyptJapan University of Science and Technology(E-JUST) named E-JUST assistive device(EJAD).Several experiments were carried out using a motion capture system(VICON) and inertial sensors to identify the human posture during the sit-to-stand motion.The EJAD uses only two inertial measurement units(IMUs) fused through an adaptive neuro-fuzzy inference systems(ANFIS) algorithm to imitate the real motion of the caregiver.The EJAD consists of two main parts,a robot arm and an active walker.The robot arm is a 2-degree-of-freedom(2-DOF) planar manipulator.In addition,a back support with a passive joint is used to support the patient s back.The IMUs on the leg and trunk of the patient are used to compensate for and adapt to the EJAD system motion depending on the obtained patient posture.The ANFIS algorithm is used to train the fuzzy system that converts the IMUs signals to the right posture of the patient.A control scheme is proposed to control the system motion based on practical measurements taken from the experiments.A computer simulation showed a relatively good performance of the EJAD in assisting the patient.展开更多
文摘In this paper, to meet the needs of studying work of dynamic mechanical properties of welded joint, the dynamic mechanical properties of welded joint were measured by means of SHPB(Split Hopkinson Pressure Bar).The dynamic mechanical property's curves of every part of welded joint were obtained. For studying the dynamic behavior of mechanical heterogeneity of welded joint, important data were offered. The method of test creates a new way of studying dynamic mechanical properties of welded joint.
文摘A measuring system for high-speed hydrogen ice pellet was introduced in this paper and the photographing of flying pellet taken therein. With the system, a pellet (minimum size of φ 0.3 mm) velocity (ranging from 50 m/s to 2500 m/s) can be measured in the HL-1M tokamak fueling experiments. By analyzing photographs and the conditions of frozen pellets (including gas supply, gas replenishment, temperature controlling etc), the pellet-freezing technology is summarized in the paper.
文摘Objective To discuss the measurement of bone tumor volume on the basis of three dimensional images segmentation technology. Methods Twenty patients with lacunar bone tumor from Tianjin Hospital and Tongji Hospital were included in the
文摘I. Increase in Human Activity and Occurrence of Geological Disasters "A geological disaster is a natural disaster that happens in a geo- logical environment. It is a geological effect (phenomenon) caused or in- fluenced by Nature and (or) human factors that leads to losses to human life, property and the environment.TM Based on their cause, geological disasters can be divided into natural geological and artificial geological disasters. Natural geological disas- ters include those caused by natural effects. These include typhoons, rain- fall, melting snow and earthquakes,
文摘In order to further adapt to the task requirements for rapid testing and high-density launches,the LM-5 series of rocket boosters have adopted an automated acquisition and measurement process for key parameters such as the weight and centroid of the launch vehicle.A fully automatic rapid measurement technology for the weight characteristics of the rocket,consisting of a measurement system,a control system,an execution system,and a data processing system,has been developed and incorporated.This does not just achieve the adjustment of the overall assembly attitude of the rocket body and the measurement of the center of mass,but also greatly reduces the workload in the traditional measurement operations such as for assembly erection and rail transfer.Thus improving the general convenience,while greatly improving the reliability and measurement accuracy of product installation,which further promotes the popularization of an intelligent measurement technology application.
基金Project supported by the National High Technology Research and Development Program of China (Grant No. 2009AA063006)the National Natural Science Foundation of China (Grant No. 40805015)the Excellent Youth Scientific Foundation of Anhui Province, China (Grant No. 10040606Y28)
文摘In this paper, we present simultaneous multiple pollutant gases (CO2, CO, and NO) measurements by using the non-dispersive infrared (NDIR) technique. A cross-correlation correction method is proposed and used to correct the cross-interferences among the target gases. The calculation of calibration curves is based on least-square fittings with third-order polynomials, and the interference functions are approximated by linear curves. The pure absorbance of each gas is obtained by solving three simultaneous equations using the fitted interference functions. Through the interference correction, the signal created at each filter channel only depends on the absorption of the intended gas. Gas mixture samples with different concentrations of CO2, CO, and NO are pumped into the sample cell for analysis. The results show that the measurement error of each gas is less than 4.5%.
文摘The work of quantitative studying the effect of technological progress on economic growth, being of great complexity and far-reaching significance, has become a quite popular research topic in the world. In recent years there are a large number of scientists who are engaged in this research both at home and abroad.
文摘Based on structured-light vision measurement technology, we study a measuring method for microdiameter. The measurement principle and mathematical model are described. A novel grayscale barycenter extraction algorithm along the radial direction is proposed, which can precisely gather the image coor- dinates of the ellipse-shaped light-stripe centers. The accuracy of the measurement result shows marked improvement by using the algorithm. The method executes circle fitting to the measured three-dimensional (3D) data using linear least square method, which can acquire the diameter, surface profile, and other information of the object effectively. On the scene, a line-structured light vision system using the presented method is applied to measure the curvature radius of metal blades. Experimental results show that the measurement precision of the system is higher than 2 μm.
基金supported by the National Key Research and Development Program(No.2019YFB2005503)。
文摘Aiming at the problem that the lattice feature exceeds the view field of the scanning electron microscope(SEM)measuring system,a new lattice measuring method is proposed based on integral imaging technology.When the system works,the SEM measuring system is equivalent to an integral image acquisition system.Firstly,a lattice measuring method is researched based on integral imaging theory.Secondly,the system parameters are calibrated by the VLSI lattice standard.Finally,the value of the lattice standard to be tested is determined based on the calibration parameters and the lattice measuring algorithm.The experimental results show that,compared with the traditional electron microscope measurement method,the relative error of the measured value of the algorithm is maintained within 0.2%,with the same level of measurement accuracy,but it expands the field of view of the electron microscope measurement system,which is suitable for the measurement of samples under high magnification.
文摘Currently,direct braking-force measurement under dynamic conditions requires a considerable modification to the vehicles and has poor compatibility because there are many types of vehicles.Thus,in this paper,an indirect measurement method of new-energy vehicles,braking force under dynamic braking conditions is proposed.The mechanical wheel and axle model at low/idling/high speeds is established using the piston-pressure formula,force transfer in the brake-wheel cylinder,relative movement between the wheel and the roller,among others.On this basis,the relationship between wheel braking force and roller-linear acceleration is further derived.Our method does not alter existing vehicle structures or sensor types.The standard sealing bolt is temporarily replaced with a hydraulic sensor for coefficient calibration.Afterward,the braking force can be indirectly calculated using the roller-linear velocity data.The method has characteristics of efficiency and high accuracy without refitting vehicles.
基金supported by the GB Network Innovation Competition(NIC)
文摘The creation of a suitable wide area monitoring system(WAMS) is widely recognized as an essential aspect of delivering a power system that will be secure,efficient and sustainable for the foreseeable future. In Great Britain(GB), the deployment of the first WAMS to monitor the entire power system in real time was the responsibility of the visualization of real time system dynamics using enhanced monitoring(VISOR) project. The core scope of the VISOR project is to deploy this WAMS and demonstrate how WAMS applications can in the near term provide system operators and planners with clear, actionable information. This paper presents the wider scope of the VISOR project and the GB wide WAMS that has been deployed. Furthermore, the paper describes some of the WAMS applications that have been deployed and provides examples of the measurement device performance issues that have been encountered during the project.
基金supported in part by a scholarship provided by the Mission DepartmentMinistry of Higher Education of the Government of Egypt
文摘This paper describes the analysis and design of an assistive device for elderly people under development at the EgyptJapan University of Science and Technology(E-JUST) named E-JUST assistive device(EJAD).Several experiments were carried out using a motion capture system(VICON) and inertial sensors to identify the human posture during the sit-to-stand motion.The EJAD uses only two inertial measurement units(IMUs) fused through an adaptive neuro-fuzzy inference systems(ANFIS) algorithm to imitate the real motion of the caregiver.The EJAD consists of two main parts,a robot arm and an active walker.The robot arm is a 2-degree-of-freedom(2-DOF) planar manipulator.In addition,a back support with a passive joint is used to support the patient s back.The IMUs on the leg and trunk of the patient are used to compensate for and adapt to the EJAD system motion depending on the obtained patient posture.The ANFIS algorithm is used to train the fuzzy system that converts the IMUs signals to the right posture of the patient.A control scheme is proposed to control the system motion based on practical measurements taken from the experiments.A computer simulation showed a relatively good performance of the EJAD in assisting the patient.