Observation of nonconservation characteristics of radio frequency noise mechanism of 40-nm n-MOSFET

Bias non-conservation characteristics of radio-frequency noise mechanism of 40-nm n-MOSFET are observed by modeling and measuring its drain current noise. A compact model for the drain current noise of 40-nm MOSFET is proposed through the noise analysis. This model fully describes three kinds of main physical sources that determine the noise mechanism of 40-nm MOSFET, i.e., intrinsic drain current noise, thermal noise induced by the gate parasitic resistance, and coupling thermal noise induced by substrate parasitic effect. The accuracy of the proposed model is verified by noise measurements, and the intrinsic drain current noise is proved to be the suppressed shot noise, and with the decrease of the gate voltage, the suppressed degree gradually decreases until it vanishes. The most important findings of the bias non-conservative nature of noise mechanism of 40-nm n-MOSFET are as follows.（i） In the strong inversion region, the suppressed shot noise is weakly affected by the thermal noise of gate parasitic resistance. Therefore, one can empirically model the channel excess noise as being like the suppressed shot noise.（ii） In the middle inversion region, it is almost full of shot noise.（iii） In the weak inversion region, the thermal noise is strongly frequency-dependent, which is almost controlled by the capacitive coupling of substrate parasitic resistance. Measurement results over a wide temperature range demonstrate that the thermal noise of 40-nm n-MOSFET exists in a region from the weak to strong inversion, contrary to the predictions of suppressed shot noise model only suitable for the strong inversion and middle inversion region. These new findings of the noise mechanism of 40-nm n-MOSFET are very beneficial for its applications in ultra low-voltage and low-power RF, such as novel device electronic structure optimization, integrated circuit design and process technology evaluation.

Random noise stimulation in the treatment of patients with neurological disorders

Random noise stimulation technique involves applying any form of energy(for instance,light,mechanical,electrical,sound)with unpredictable intensities through time to the brain or sensory receptors to enhance sensory,motor,or cognitive functions.Random noise stimulation initially employed mechanical noise in auditory and cutaneous stimuli,but electrical energies applied to the brain or the skin are becoming more frequent,with a series of clinical applications.Indeed,recent evidence shows that transcranial random noise stimulation can increase corticospinal excitability,improve cognitive/motor performance,and produce beneficial aftereffects at the behavioral and psychological levels.Here,we present a narrative review about the potential uses of random noise stimulation to treat neurological disorders,including attention deficit hyperactivity disorder,schizophrenia,amblyopia,myopia,tinnitus,multiple sclerosis,post-stroke,vestibular-postural disorders,and sensitivity loss.Many of the reviewed studies reveal that the optimal way to deliver random noise stimulation-based therapies is with the concomitant use of neurological and neuropsychological assessments to validate the beneficial aftereffects.In addition,we highlight the requirement of more randomized controlled trials and more physiological studies of random noise stimulation to discover another optimal way to perform the random noise stimulation interventions.

The load criteria for ship mechanical noise prediction in low frequencies and experimental validation

The loading method of the external excitations generated by the equipment directly affects the predicted result of the mechanical noise which should be the same under different excitation forms for the given equipment.In this paper,general load criteria are proposed to define forces/moments as the standard form and convert other forms of loads in the low-frequency domain.As the most typical form to charac-terize equipment excitation,acceleration load loading methods for different conditions are investigated.The equivalent formula between ideal accelerations and generalized forces establishes the first load cri-terion.The second load criterion is proposed to address the issue of an average acceleration loading,in which the phase and amplitude distribution are both absent,and cannot apply to the load identification.The upper and lower limits of the mechanical noise can be determined by the vibroacoustic transfer func-tion of the three load models,and the energy-averaged value is used to represent the mechanical noise.Furthermore,the third criterion is used to handle the case where the acceleration load is given by the results of a bench test.According to the equipment source descriptor invariance,the conversion method is achieved between the bench test and the real ship based on the transfer function of a load model,and the mechanical noise is predicted by an equivalent energy method.Finally,a three-parameter method to quantitatively evaluate the well-fitting of experimental and numerical results,and the load criteria are well validated by underwater acoustic experiments of an experimental model.

Numerical analysis of broadband noise reduction with wavy leading edge

Large Eddy Simulation（LES） is performed to investigate the airfoil broadband noise reduction with wavy leading edge under anisotropic incoming turbulence. The anisotropic incoming turbulence is generated by a rod with a diameter of 10 mm. The incoming flow velocity is 40 m/s and the corresponding Reynolds numbers based on airfoil chord and rod diameter are about 397000 and 26000, respectively. The far-field acoustic field is predicted using an acoustic analogy method which has been validated by the experiment. A straight leading edge airfoil and a wavy leading edge airfoil are simulated. The results show that wavy leading edge increases the airfoil lift and drag whereas the lift and drag fluctuations are substantially reduced. In addition, wavy leading edge can significantly change the flow pattern around the leading edge and a pair of counter-rotating streamwise vortices stemming from each wavy leading edge peak are observed.An averaged noise reduction of 9.5 dB is observed with the wavy leading edge at the azimuthal angle of 90°. Moreover, the wavy leading edge can mitigate noise radiation at all the azimuthal angles without significantly changing the noise directivity. The underlying noise reduction mechanisms are then analyzed in detail.

Flap side-edge noise mechanism and shape modification noise reduction design

Flap side-edge noise is a significant noise source for airplane at takeoff and landing stages. The generation mechanism of flap side-edge noise is analyzed by numerical simulation on unsteady flow field using Very Large Eddy Simulation （VLES）. Two kinds of flap side-edge shape modifications are proposed, and their frequency spectrum and directivity of far-field noise are compared with the baseline configuration using permeable integral surface Ffowcs Williams and Hawkings （FW-H） acoustic analogy method to investigate their effects on noise reduction. Via the numerical simulation of flow field and acoustic field, it proves that the flap side-edge noise is broadband noise in nature. The different shapes of flap side-edge change the pattern of flow field, vortex structures and the development of vortex, thus having influences on noise source distributions and characteristics of far-field noise. The result shows that at the given 5° angle of attack, the proposed flap side-edge shape modifications can reduce the overall sound pressure level （OASPL） by 1 to 2 dB without decreasing the lift and drag aerodynamic performances.

Theoretical analysis and experimental research on non-cavitation noise modulation mechanism of underwater counter-rotation propeller

The underwater counter-rotation propeller non-cavitation noise has an obvious mod- ulation characteristic which is due to the interaction of flow and blade. A modulation mecha- nism is presented in this paper. A sound pressure spectrum model is presented to describe its non-cavitation noise with application of generalized acoustic analogy method, the modulation mechanism is expressed with the improvement of sound pressure model. The power spectrum and modulation spectrum are presented by numerical simulation. Theoretical analysis and nu- merical simulation results are verified by the cavitation tunnel experiment. The modulation model of counter-rotation propeller is beneficial to the prediction modulation characteristics and identification of underwater high-speed vehicles.

The Effect of Lateral Guiding Mechanism on Noise Characteristics in Semiconductor Lasers

A comparison between intensity noise spectra and also the line shapes of gain-guided, weakly-index-guided, and strongly-index-guided semiconductor lasers are made using numerical solution of Maxwell-Bloch equations including spontaneous emission noise.

Utilization of Whale-inspired Leading-edge Tubercles for Airfoil Noise Reduction

Numerical studies are conducted to explore the noise reduction effect of leading-edge tubercles inspired by humpback whale flippers.Large eddy simulations are performed to solve the flow field,while the acoustic analogy theory is used for noise prediction.In this paper,a baseline airfoil with a straight leading-edge and three bionic airfoils with tubercled leading-edges are simulated.The tubercles have sinusoidal profiles and the profiles are determined by the tubercle wavelength and amplitude.The tubercles used in this study have a fixed wavelength of 0.1c with three different amplitudes of 0.1c,0.15c and 0.2c,where c is the mean chord of the airfoil.The freestream velocity is set to 40 m/s and the chord based Reynolds number is 400,000.The predicted flow field and acoustic field of the baseline airfoil are compared against the experiments and good agreements are found.A considerable noise reduction level is achieved by the leading-edge tubercles and the tubercle with larger amplitude can obtain better noise reduction.The underlying flow mechanisms responsible for the noise reduction are analyzed in detail.

Interior noise field of a viscoelastic cylindrical shell excited by TBL pressure fluctuations:Ⅰ.Production mechanisms of the noise

Applying the wavenumber frequency transfer function to describe the whole system including tht elastic cylindrical shell and the fluid loading, a general expression of the cross spectrum of the interior noise induced by the TBL (turbulent boundary layer) pressure fiuctuations is derived. There are two production mechanisms of the noise: one is direct transfer of the convective ridge of the pressure fluctuations through the shell, the other is the reradiation of resonance modes excited by the pressure fluctuations. At low frequencies the noise produced by the latter mechanism is dominant. Solving the frequency equation of the cylindrical shell with liquid loading, the two Stoneley-type poles in the complex K plane are presented. They are the major sources of the reradiation of shell at low frequencies. Finally, effects of the shell radius, shell thickness, absorption of material and the flow speeds on the noise reduction are computed by numerical iniegration.