China's Processing Trade Development for Mechanical and Electrical Products

Since the launch of the economic reform and opening to the outside world, China has seen rapid growth in its export of mechanical and electrical products, with its export

Multi-component quantitative and feed-forward neural network for pattern classification of raw and wine-processed Corni Fructus

Background:To promote the quality evaluation,clarify the processing mechanism and distinguish origins of Corni Fructus(cornus)from different regions.Methods:This study developed a high performance liquid chromatography method for simultaneous determination of 5-hydroxymethylfurfural,2 phenolic acids and 4 iridoid glycosides and the reference fingerprint of cornus from different regions.In addition,the feedforward neural network model provided a pattern classification of sample regions.Results:The content of morroniside and loganin were the highest in all raw cornus samples ranging from 9.45μg/mg to 16.3μg/mg and 6.64μg/mg to 13.7μg/mg,respectively.The level of sweroside in raw cornus from Henan(0.83μg/mg^(-1).39μg/mg)and Zhejiang(0.64μg/mg^(-1).17μg/mg)were greater than other origins.After wine-processing,the glucose or fructose were dehydrated to increase the levels of 5-hydroxymethylfurfural.The C-4 position of-COOCH3 of hot-sensitive iridoid glycosides was hydrolyzed to generate-COOH as stable components.Polyphenol derivatives may be degraded to increase the content of phenolic acid.Subsequently,an excellent feedforward neural network model for identification of raw cornus and wine-prepared cornus was established which could distinguish the sample origins.Conclusion:This work provided a trustworthy method to evaluate the quality and distinguish the sources of cornus.Meanwhile,the clear processing mechanism provided a scientific foundation for controlling the cornus quality during wine-processing.

Enlightenment and Suggestions on the Construction of Information Platform and Processing Mechanism of Drug Shortages in Developed Countries to China

Objective To study how to improve and perfect the information platform and processing mechanism of drug shortages in China.Methods By searching the relevant policies from official websites of FDA,European Medicines Agency(EMA),Health Canada(HC)and National Health Commission,the good experience of the United States,the European Union and Canada in the construction of information platform and processing mechanism of drug shortages was summarized for reference in China.Results and Conclusion China has initially established the processing mechanism of drug shortages,but the platform construction should be improved,and the information disclosure of drug shortages varies from province to province.We should improve the information platform of drug shortages,strengthen the disclosure and communication of information,enrich the processing tools and measures after the drug shortages occurs,and strengthen the cooperation with relevant associations and other non-governmental departments.

COMPUTER SIMULATION OF 3-DIMENSIONAL DYNAMIC ASSEMBLY PROCESS OF MECHANICAL ROTATIONAL BODY

Focusing on the study of the components of mechanical rotational body,the data structure and algorithm of component model generation are discussed.Some problems in assembly process of 3 dimensional graph of components are studied in great detail.

NUMERICAL SIMULATION OF ROUND TO OVAL ROLLING PROCESS

Three dimensional thermal-mechanical coupled elasto-plastic FEM has been used for simulation of round to oval single pass rolling. The analysis was conducted using MARC/AUTOFORCE1. 2 code. The material is assumed to be elasto-plastic and it obey the Von Mises yield criterion and Prandtl- Reuss rule. Deformation of the workpiece is simulated in a step-by-step manner,updating the coordinates of material points and the property after each step, so that both nonsteady-state and stendy-state deformation can be simulated. The heat transfter between the workpiece, the rolls, and enviroment and the heat generation due to plastic work and friction force, are considered in the analys- is.Predicted the deformation shape of the workpiece, distributions of strains, stresses, strain rates and temperatures, roll-separating force and roll torque are presented.

Laboratory Simulation of the Formation Process of Surface Geochemical Anomalies Applied to Hydrocarbon Exploration

The formation mechanisms and processes of geochemical anomalies used as proxies in surface geochemistry exploration （SGE） have not been well understood. Previous studies cannot realize 3D measurement of microseeping hydrocarbons from reservoirs to the surface, which made it difficult to understand the features and pathways of deep hydrocarbon microseepages. Understanding the processes of hydrocarbon microseepages will contribute to the acceptance and effectiveness of surface geochemistry. Based on a simplified geological model of hydrocarbon microseepages, including hydrocarbon reservoir, direct caprock, overlying strata and Quaternary sediments, this work established a 3D experimental system to simulate the mechanisms and processes of deep hydrocarbon microseepes extending to the surface. The dispersive halos of microseeping hydrocarbons in the subsurface were adequately described by using this 3D experimental system. Results indicate that different migration patterns of hydrocarbons above the point gas source within the simulated caprock and overlying strata can be reflected by the ratio of i-butane to n-butane （i-C4/n-C4）, which follow diffusion and infiltration （buoyancy） mechanisms. This is not the case for vertical measurement lines far from the point gas source. A vertical gas flow in the form of a plume was found during hydrocarbon microseepage. For sampling methods, the high-density grid sampling is favorable for delineating prospecting targets. Hydrocarbon infiltration or buoyancy flow occurs in the zones of infiltration clusters, coupling with a diffusion mechanism at the top of the water table and forming surface geochemical anomalies. These results are significant in understanding hydrocarbon microseepage and interpreting SGE data.

Evolutionary game analysis of problem processing mechanism in new collaboration

This paper analyzes a problem processing mechanism in a new collaboration system between the main manufacturer and the supplier in the"main manufacturer-supplier"mode,which has been widely applied in the collaborative development management of the complex product.This paper adopts the collaboration theory,the evolutionary game theory and numerical simulation to analyze the decision-making mechanism where one upstream supplier and one downstream manufacturer must process an unpredicted problem without any advance contract in common.Results show that both players'decision-makings are in some correlation with the initial state,income impact coefficients,and dealing cost.It is worth noting that only the initial state influences the final decision,while income impact coefficients and dealing cost just influence the decision process.This paper shows reasonable and practical suggestions for the manufacturer and supplier in a new collaboration system for the first time and is dedicated to the managerial implications on reducing risks of processing problems.

Mechanism of Salt Migration Driven by Tectonic Processes:Insights from Physical and Numerical Modeling

1 Introduction Physical and numerical models are constructed to investigate the evolution and mechanism of salt migration driven by tectonic processes.In recent years,we have designed and ran series of models to simulate salt

Mechanisms underlying syntactic and semantic processing of Chinese simple sentences Evidence from event-related brain potentials

This study sought to test the processing of three types of sentences in Chinese, as correct sentences, semantic violation sentences, and sentences containing semantic and syntactic violations, based on the following sentence pattern： ＂subject （noun） ＋ yi/gang/zheng ＋ predicate （verb）＂. Event-related potentials on the scalp were recorded using 32-channel electroencephalography. Compared with correct sentences, target words elicited an early left anterior negativity （N400） and a later positivity （P600） over frontal, central and temporal sites in sentences involving semantic violations. In addition, when sentences contained both semantic and syntactic violations, the target words elicited a greater N400 and P600 distributed in posterior brain areas. These results indicate that Chinese sentence comprehension involves covert grammar processes.

Recent process in special steel,heat treatment and surface modification of automotive components

Demand of improving the mechanical properties and productivity of automotive components while minimizing environmental impact makes the development of special steel combined with advance heat treatment and surface modification technologies become an important research area. Recently,to reduce CO_2 emissions by saving the manufacturing time,the following new special steel and advance heat treatment methods were developed: (1 ) An anti-coarsening extra-fine case hardening steel for automobile gear was developed,whose carburizing temperature can be improved for conventional 930 - 950℃to 1 050℃without coarsening,and the carburizing time can be reduced by maximum 75%. (2) Various microalloyed steels for fracture splitting connecting rod were developed.By using the above-mentioned steel combined with Thermo Mechanical Control Process(TMCP) method,the manufacturing time can be reduced by 30%-40%. (3) Vacuum carburizing and mild carburizing combined with induction quenching are being developed to replace the traditional gas carburizing,and the CO_2 emissions can be reduced by 20%-40%. (4) Intensive quenching is another new quenching technology which can be defined as cooling usually with pure water quenchant or low concentration water/salt solutions at a rate several times higher than the rate of ' normal' or conventional quenching,and the conventional effective case hardening depth can be reduce greatly and carburizing time can reduced. In addition,the high pressure gas quenching for reducing the quenching distortion and dual shot-peening for improving fatigue strength of gear will also be discussed. In a word,the present paper will focus on how to use the interaction among the development of special steel, advance heat treatment and surface modification to improve the strength of automotive components while reducing the manufacturing cost and impact to environment.

Transformation Process and Mechanism of Lithium Borates

Amounts of lithium-containing salt lake brine resources are widely distributed in the four provinces named Qinghai,Tibet,Inner Mongolia and Xinjiang province,especially the salt lakes in Qinghai-Tibet Plateau are abundant of

Design and Research on Virtual Display of Whole Process Mechanization for Rice Production in Cold Region

With the development of society,the virtual reality technology and multimedia technology have been applied to modern large-scale agriculture. The paper describes the design ideas for animation display of mechanized rice production in cold region,and elaborates the design of major part of each scene. By animation display,we can know about the whole process of rice production,as well as the benefits of mechanized operation.

Experimental studies of focal mechanism based on the dynamic process of energy release

ＥｘｐｅｒｉｍｅｎｔａｌｓｔｕｄｉｅｓｏｆｆｏｃａｌｍｅｃｈａｎｉｓｍｂａｓｅｄｏｎｔｈｅｄｙｎａｍｉｃｐｒｏｃｅｓｏｆｅｎｅｒｇｙｒｅｌｅａｓｅＸＩＭＩＮＧＺＨＥＮＧ１）（郑熙铭）ＨＯＵＸＩＵＧＡＯ２）（高后秀）ＹＵＱＩＮＹＡＮＧ２）（杨渝...

A preliminary analysis of physical mechanism of transformation process from a landed typhoon into an extratropical cyclone

A diagnostic study is performed in the paper on the process of typhoon Norris (1980) transforming into an ex-tratropical cyclone after its landing over Southeast China. The main findings are as follows:The changes of kinetic energy are mainly attributed to the generation due to non-divergent wind. During the early stage of the typhoon landing, there exits only a small quantity of kinetic energy exchanging with the environment. And after it is transformed into an extratropical cyclone, a large amount of kinetic energy is exported from the system toward the environment.The horizontal and vertical flux-divergence terms of eddy available potenlial energy are the prominent sinks in the budgets of eddy kinetic energy. The generations of eddy kinetic energy due to both the barotropic and baroclinic processes are source terms. The former is remarkable during the initial stage. But after the depression is transformed into an extratropical cyclone, the roles of the generation by the barotropic and baroclinic processes are reversed, 1. e. , the latter has become more significant than the former.Diabatic heating is the most dominant heat source. The terms of vertical heat flux by cumulus and large-scale motion are the major sinks. And the latter is prominent after the system is transformed into an extratropical cycfone.

Ehrenfest Approach to the Adiabatic Invariants and Calculation of the Intervals of Time Entering the Energy Emission Process in Simple Quantum Systems

In the first step, the Ehrenfest reasoning concerning the adiabatic invariance of the angular orbital momentum is applied to the electron motion in the hydrogen atom. It is demonstrated that the time of the energy emission from the quantum level n+1 to level n can be deduced from the orbital angular momentum examined in the hydrogen atom. This time is found precisely equal to the time interval dictated by the Joule-Lenz law governing the electron transition between the levels n+1 and n. In the next step, the mechanical parameters entering the quantum systems are applied in calculating the time intervals characteristic for the electron transitions. This concerns the neighbouring energy levels in the hydrogen atom as well as the Landau levels in the electron gas submitted to the action of a constant magnetic field.

THE APPLICATION OF MICROELECTRODE TO THE STUDY OF MULTISTEP ELECTRODE PROCESSES UNDER STEADY STATE CONDITIONS PART I EE MECHANISM

Under steady-state conditions, the general currents of EE reactions at disk,hemispherical and spherical microelectrodes are derived.From these equations, some electrode reaction parameters can be very simply obtained.

Formation mechanism of a smooth, defectfree surface of fused silica optics using rapid CO2 laser polishing

Surface defects introduced by conventional mechanical processing methods can induce irreversible damage and reduce the service life of optics applied in high-power lasers.Compared to mechanical processing,laser polishing with moving beam spot is a noncontact processing method,which is able to form a defect-free surface.This work aims to explore the mechanism of forming a smooth,defect-free fused silica surface by high-power density laser polishing with coupled multiple beams.The underlying mechanisms of laser polishing was revealed by numerical simulations and the theoretical results were verified by experiments.The simulated polishing depth and machined surface morphology were in close agreement with the experimental results.To obtain the optimized polishing quality,the effects of laser polishing parameters(e.g.overlap rate,pulse width and polishing times)on the polishing quality were experimentally investigated.It was found that the processing efficiency of fused silica materials by carbon dioxide(CO2)laser polishing could reach 8.68 mm2 s−1,and the surface roughness(Ra)was better than 25 nm.Besides,the cracks on pristine fused silica surfaces introduced by initial grinding process were completely removed by laser polishing to achieve a defect-free surface.The maximum laser polishing rate can reach 3.88μm s−1,much higher than that of the traditional mechanical polishing methods.The rapid CO2 laser polishing can effectively achieve smooth,defect-free surface,which is of great significance to improve the surface quality of fused silica optics applied in high-power laser facilities.

Analysis on Technical Transformation of Machining in Aviation Industry

This paper focuses on the analysis of the aviation industry machining technology transformation,and its current development status.The entire development plan for numerical control machine tool needs to be perfected,and the balance of numerical control technology development has to be strengthened.Additionally,the utilization rate of numerical control machines is relatively low;thus,raise the rate of equipment,numerical control,and numerical control equipment usage,and enhance the mechanical processing technology management task.Its aim is to improve aviation industry machining efficiency,which leads to a good development in China's aviation industry.

Effect of Different Aging Processes on the Microstructure and Mechanical Properties of a Novel Al–Cu–Li Alloy

The effects of different aging processes on the microstructure and mechanical properties of a novel Al-Cu-Li alloy have been investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. It is found that the tensile properties of a novel Al-Cu-Li alloy are sensitive to aging processes, which correspond to different microstructures. σ（Al_5Cu_6Mg_2） and T_1（Al_2CuLi） phases are the major precipitates for the alloy in T6 aging condition（165 ℃/60 h）. After duplex aging condition（150 ℃/24 h ＋ 180 ℃/12 h）, σ, θ＇（Al_2Cu） and T_1 phases are detected. Only the T_1 phases can be found in the T8 state alloy（6% pre-strain＋135 ℃/60 h）. The failure modes of alloy in T6 and duplex aging conditions are dimple-intergranular fracture, while typical quasi-cleavage fracture in T8 condition.

Nonlocal Physics in the Wave Function Terminology

Shortcomings of the Boltzmann physical kinetics and the Schrödinger wave mechanics are considered. From the position of nonlocal physics, the Schrödinger equation is a local equation;this fact leads to the great shortcomings of the linear Schrödinger wave mechanics. Nonlocal nonlinear quantum mechanics is considered using the wave function terminology.