Magmatic-hydrothermal Evolution and Mineralization Mechanisms of the Wangjiazhuang Cu(-Mo)Deposit in the Zouping Volcanic Basin,Shandong Province,China:Constraints from Fluid Inclusions

The Wangjiazhuang Cu(-Mo)deposit,located within the Zouping volcanic basin in western Shandong Province,China,is unique in this area for having an economic value.In order to expound the metallogenetic characteristics of this porphyry-like hydrothermal deposit,a detailed fluid inclusion study has been conducted,employing the techniques of representative sampling,fluid inclusion petrography,microthermometry,Raman spectroscopy,LA-ICP-MS analysis of single fluid inclusions,as well as cathode fluorescence spectrometer analysis of host mineral quartz.The deposit contains mainly two types of orebodies,i.e.veinlet-dissemination-stockwork orebodies in the K-Si alteration zone and pegmatiticquartz sulfide veins above them.In addition,minor breccia ore occurs locally.Four types of fluid inclusions in the deposit and altered quartz monzonite are identified:L-type one-or two-phase aqueous inclusions,V-type vapor-rich inclusions with V/L ratios greater than 50%-90%,D-type multiphase fluid inclusions containing daughter minerals or solids and S-type silicate-bearing fluid inclusions containing mainly muscovite and biotite.Ore petrography and fluid inclusion study has revealed a three-stage mineralization process,driven by magmatic-hydrothermal fluid activity,as follows.Initially,a hydrothermal fluid,separated from the parent magma,infiltrated into the quartz monzonite,resulting in its extensive K-Si alteration,as indicated by silicate-bearing fluid inclusions trapped in altered quartz monzonite.This is followed by the early mineralization,the formation of quartz veinlets and dissemination-stockwork ores.During the main mineralization stage,due to the participation and mixing of meteoric groundwater with magmatic-sourced hydrothermal fluid,the cooling and phase separation caused deposition of metals from the hydrothermal fluids.As a result,the pegmatitic-quartz sulfide-vein ores formed.In the late mineralization stage,decreasing fluid salinity led to the formation of L-type aqueous inclusions and chalcopyrite-sulfosalt ore.Coexistence of V-type and D-type inclusions and their similar homogenization temperatures with different homogenization modes suggest that phase separation or boiling of the ore-forming fluids took place during the early and the main mineralization stages.The formation P-T conditions of S-type inclusions and the early and the main mineralization stages were estimated as ca.156-182 MPa and 450-650℃,350-450℃,18-35 MPa and 280-380℃,8-15 MPa,respectively,based on the microthermometric data of the fluid inclusions formed at the individual stages.

Trace element compositions of pyrite and stibnite:implications for the genesis of antimony mineralization in the Yangla Cu skarn deposit,Northwestern Yunnan,China

The Yangla Cu skarn deposit is located in the central part of the Jinshajiang Suture Zone,southwest China,with a total reserve of 150 Mt Cu@1.03%.The newly discovered antimony orebodies at the depth of Yangla are strictly controlled by the stratum,structure,and lithology,which are lenticular and vein-like within the marble fracture zone,which can provide a window into multistage miner-alization and ore genesis at Yangla.Mineralization can be divided into three types,Cu–Pb–Zn(skarn)pyrite,galena,and sphalerite,Cu(porphyry)chalcopyrite and pyrite,and Sb(hydrothermal)stibnite and pyrite.The mineral assem-blages were stibnite+pyrite+calcite+quartz±minor scheelite in antimony ores.This study presents quantitative measurements of the trace element compositions of pyrite and stibnite from the Yangla antimony ores.Analysis of pyrite with electron probe microanalysis(EPMA)showed enrichment in Co,Ni,Sb,As,and Mo,and deficit in its S and Fe contents when compared to the stoichiometric con-centrations of S and Fe in pyrite.The Sb-related pyrite may belong to sedimentary-reworked genesis and may be modi-fied by hydrothermalfluids,thereby presenting a certain dif-ference(i.e.,crystal morphology,texture,and chemical com-position)compared to the skarn and porphyry Cu-related pyrite in the Yangla Cu skarn deposit.Analysis of stibnite with EPMA and inductively coupled plasma-mass spectrom-etry showed enrichment in As,Pb,Sn,Pb,Cu,and Zn,and presented much higher Sb contents and slightly lower S con-tents when compared to the stoichiometric concentrations of Sb and S in stibnite.Statistical analysis of the stibnite trace elements showed correlations for the elemental pairs Cu–Pb,As–Sb,and Sn–Pb,and the coupled substitution equations Sb^(3+)↔Cu^(+)+Pb^(2+),Sb^(3+)↔As^(3+),and Sn^(2+)↔Pb^(2+)may be the major factors governed the incorporating Cu,Pb,As and Sn within the stibnite.Moreover,this study preliminary shows that the antimony mineralization may belong to a car-bonate replacement hydrothermal genesis at Yangla.

Geology and mineralization of the Dongping supergiant alkalic-hosted Au-Te deposit(>100 t Au)in Northern Hebei Province,China:A review

The Dongping deposit is the largest alkalic-hosted gold deposit in China containing>100 t of Au.This paper presents a new understanding for Dongping ore system,based on the previous studies.The mineralization originally occurred at 400-380 Ma,simultaneous with emplacement of the Shuiquangou alkaline complex,and was overprinted by the hydrothermal activity in the Yanshanian.Isotope compositions of ores indicate metals of the deposit are mainly provided by the Shuiquangou complex.Ore-forming fluids are characterized by increasing oxygen fugacity and decreasing sulfur fugacity,while tellurium fugacity increased in the Stage II-2 and decreased in Stage II-3.These systematic changes are closely related to the processes of mineral precipitation and fluid evolution.Sulfide precipitation from Stage Ⅰ to Stage Ⅱ was triggered by fluid boiling,which leads to the precipitation of Pb-Bi-Te,due to decrement of sulfur fugacity.Condensation of gas phase containing high concentration of H_2Te leads to precipitation of Te-Au-Ag minerals and native tellurium.Based on these hypotheses,this paper present a polyphase metallogenic model as follow.During the Devonian,fluids were released from alkaline magmas,which carried ore-forming materials form the surrounding rocks and precipitate the early ores.During the Jurassic-Cretaceous,fluorine-rich fluids exsolved from highly factionated Shangshuiquan granite,which extracted and concentrated Au from the Shuiquangou complex and the Sanggan Group metamorphic rocks,and finally formed the Dongping gold deposit.

A review of in situ carbon mineralization in basalt

Global warming has greatly threatened the human living environment and carbon capture and storage(CCS)technology is recognized as a promising way to reduce carbon emissions.Mineral storage is considered a reliable option for long-term carbon storage.Basalt rich in alkaline earth elements facilitates rapid and permanent CO_(2) fixation as carbonates.However,the complex CO_(2)-fluid-basalt interaction poses challenges for assessing carbon storage potential.Under different reaction conditions,the carbonation products and carbonation rates vary.Carbon mineralization reactions also induce petrophysical and mechanical responses,which have potential risks for the long-term injectivity and the carbon storage safety in basalt reservoirs.In this paper,recent advances in carbon mineralization storage in basalt based on laboratory research are comprehensively reviewed.The assessment methods for carbon storage potential are introduced and the carbon trapping mechanisms are investigated with the identification of the controlling factors.Changes in pore structure,permeability and mechanical properties in both static reactions and reactive percolation experiments are also discussed.This study could provide insight into challenges as well as perspectives for future research.

Clay minerals and elemental composition of sediments on different sedimentary units in the northern East China Sea shelf:provenance tracing and genetic mechanism analysis

The composition,provenance,and genetic mechanism of sediment on different sedimentary units of the East China Sea(ECS)shelf are essential for understanding the depositional dynamics environment in the ECS.The sediments in the northern ECS shelf are distributed in a ring-shaped distribution centered on the southwestern Cheju Island Mud.From the inside to the outside,the grain size goes from fine to coarse.Aside from the“grain size effect”,hydrodynamic sorting and mineral composition are important restrictions on the content of rare earth elements(REEs).Based on the grain size,REEs,and clay mineral composition of 300 surface sediments,as well as the sedimentary genesis,the northern ECS shelf is divided into three geochemical zones:southwestern Cheju Island Mud Area(ZoneⅠ),Changjiang Shoal Sand Ridges(ZoneⅡ-1),Sand Ridges of the East China Sea shelf(ZoneⅡ-2).The northern ECS shelf is mostly impacted by Chinese mainland rivers(the Changjiang River and Huanghe River),and the provenance and transport mechanism of sediments of different grain sizes is diverse.The bulk sediments come primarily from the Changjiang River,with some material from the Huanghe River carried by the Yellow Sea Coastal Current and the North Jiangsu Coastal Current,and less from Korean rivers.Among them,surface sediments in the southwestern Cheju Island Mud Area(ZoneⅠ)come mostly from the Changjiang River and partly from the Huanghe River.It was formed by the counterclockwise rotating cold eddies in the northern ECS shelf,which caused the sedimentation and accumulation of the fine-grained sediments of the Changjiang River and the Huanghe River.The Changjiang Shoal Sand Ridges(ZoneⅡ-1)were developed during the early-middle Holocene sea-level highstand.It is the modern tidal sand ridge sediment formed by intense hydrodynamic action under the influence of the Yellow Sea Coastal Current,North Jiangsu Coastal Current,and Changjiang Diluted Water.The surface sediments mainly originate from the Changjiang River and Huanghe River,with the Changjiang River dominating,and the Korean River(Hanjiang River)influencing just a few stations.Sand Ridges of the East China Sea shelf(ZoneⅡ-2)are the relict sediments of the paleo-Changjiang River created by sea invasion at the end of the Last Deglaciation in the Epipleistocene.The clay mineral composition of the surface sediments in the study area is just dominated by the Changjiang River,with the North Jiangsu Coastal Current and the Changjiang Diluted Water as the main transporting currents.

Study of the Emplacement Mechanism of the Fenghuangshan Granite Pluton and Related Cu-Au Mineralization in Tongling, Anhui Province

The Fenghuangshan Pluton is located in the Tongling polymineral-cluster district in the middle-lower section of the Yangtze metallogenic belt. In tectonic terms, it is in the middle of the Guichi-Fanchang faulted fold bundle of the lower Yangtze Platform fold belt between the Dabie Orogenic Belt and the Jiangnan Massif. Analyses of the structural deformation characteristics of both the contact zone and the interior of the pluton are used to explain its emplacement mechanism. The foliation and lineation of the pluton, consisting of the oriented distribution of dark minerals and xenoliths, mainly concentrate along the margin of the pluton. Toward the center of the pluton, the foliation structure becomes weak, showing intense compression formation at the margin, and reflecting the conformable intrusion of the pluton. The relatively gentle lineation is evidence of a rotatory emplacement mechanism. Relatively steep marginal foliation reflects compression expanding. Affected by the thermal power of the pluton, the metamorphism of the contact zone has zonation. Both the strike of the axial plane of fold at the contact zone and that of the flow cleavage of the ductile shear zone are consistent with the boundary of the pluton, which reflects the speciality of conformable intrusion. The hinges of the folds are mostly inclined and erect, reflecting both the rotation of the pluton and its upward spiraling emplacement mechanism. Boudins developed in both the contact zone and the steep strata indicate the emplacement characteristic of the ballon expanding. The surrounding rock of the contact zone shortens horizontally. The average percentage of shortening is 39.7%, which further proves the mechanism of the pluton expanding, and the space occupied by the active expanding intrusion was provided by the shortening of the surrounding rock. The left-lateral shear shown by the ductile shear zone and the rheomorphic fold reveals that the pluton emplacement and the deformation of surrounding rock are controlled by a NNE-striking left-lateral shear stress field. These characteristics of pluton structures provide a mechanism of emplacement. In the deep, the pluton apirally rose left lateral, and in the shallow, the one forcefully emplaced balloningly.

Coupling mechanism of mineralization and hydrocarbon-forming in hydrothermal convection system: An example from Longtoushan Sn-polymetal deposit, Dachang

Longtoushan Sn-polymetal deposit is a large-scale deposit of high-tenor. The ore-bodies occur in reef limestone of middle Devonian. There is much anthraxolite in reef limestone and ore-bodies. The anthraxolite is the postmature result of oil-gas' thermal metamorphism. The close relationship of anthraxolite and Sn-polymetal deposit reveals the space-time relation between oil-gas evolution and Sn-polymetal mineralization. Sulfur isotope of Longtoushan deposit is close to oil's sulfur in Devonian, which indicates obvious relationship between the sulfur's source of deposit and oil-gas' activity. The forming of Longtoushan deposit relates to exhalative-sedimentary mineralization in Devonian. Because of the favorable hydrocarbon-forming condition of Longtoushan reef and surrounding basin facies' black shale and peat, coupling of ore-formation and hydrocarbon-forming occurs in seabed's hydrothermal convection. The distributing of ore-forming elements indicates the presence of hydrothermal convection system. The thermal fluid containing organic matters conduces to Sn-polymetal elements' activation and transfer, and provides catalyzing condition to the transforming from SO42- to S2-. The erosion action of brine containing organic acid to reef limestone induces the growing of crannies and karst's caverns, which provides advantageous space to Sn-polymetal mineralization. The heat source of mineralization provides thermocatalysis condition to hydrocarbon-forming. When the circulatory fluid containing oil-gas enters the high-temperature region(＞150 ℃ ), the oil-gas is decomposed and anthraxolite comes into being.

Geochemical Characteristics of Two Types of Ores from Jinshan Shear Zone-hosted Gold Deposit, Jiangxi, with a Discussion on the Mechanism of Two-stage Mineralization

Two types of gold ores,siliceous mylonite and quartz vein,formed at the first and second stages of mineralization respectively, can be clearly recognized in the shear zone-hosted gold deposit at Jinshan, Jiangxi.Similarity in REE and trace elements between the siliceous mylonite and the country rocks indicates that the ore metals were supplied by the surrounding strata during the first stage of mineralization.On the other hand, as indicated by fluid inclusion data,the ore-forming fluid at the second stage was of meteoric origin and the precipitation of gold was caused by phase separation.

Mechanism of mechanical activation for spontaneous combustion of sulfide minerals

In order to uncover the intrinsic reasons for spontaneous combustion of sulfide minerals,representative samples were collected from typical metal mines to carry out the mechanical activation experiment.The structures and heat behaviors of activated samples were characterized by scanning electron microscopy（SEM）,X-ray diffraction（XRD） analysis,and simultaneous thermal analysis（STA）.It is found that the sulfide minerals after mechanical activation show many changes with increased specific surface areas,aggregation phenomenon,decreased diffraction peak intensity,broadened diffraction peak,declined initial temperatures of heat release and self-ignition points.A new theory for explaining the spontaneous combustion of sulfide minerals is put forward：the chemical reaction activity of sulfide minerals is heightened by all kinds of mechanical forces during the mining,and the spontaneous combustion takes place finally under proper environment.

Correlations between mineral composition and mechanical properties of granite using digital image processing and discrete element method

This study investigated the correlations between mechanical properties and mineralogy of granite using the digital image processing(DIP) and discrete element method(DEM). The results showed that the X-ray diffraction(XRD)-based DIP method effectively analyzed the mineral composition contents and spatial distributions of granite. During the particle flow code(PFC2D) model calibration phase, the numerical simulation exhibited that the uniaxial compressive strength(UCS) value, elastic modulus(E), and failure pattern of the granite specimen in the UCS test were comparable to the experiment. By establishing 351 sets of numerical models and exploring the impacts of mineral composition on the mechanical properties of granite, it indicated that there was no negative correlation between quartz and feldspar for UCS, tensile strength(σ_(t)), and E. In contrast, mica had a significant negative correlation for UCS, σ_(t), and E. The presence of quartz increased the brittleness of granite, whereas the presence of mica and feldspar increased its ductility in UCS and direct tensile strength(DTS) tests. Varying contents of major mineral compositions in granite showed minor influence on the number of cracks in both UCS and DTS tests.

Interactions between Bacillus mucilaginosus and silicate minerals(weathered adamellite and feldspar):Weathering rate,products,and reaction mechanisms

Bacillus mucilaginosus is a common soil bacterium,and usually used as a model bacterium in studying microbe-mineral interactions.Several reaction mechanisms of B.mucilaginosus weathering silicate minerals were proposed.However,the molecule mechanisms and detailed processes were still unclear.In this paper,bacterium-mineral interactions were studied in terms of variations in pH value over the experimental period,variations in mineral composition,weathering rates of silicate minerals and volatile metabolites in the culture medium,etc.,to further explore the bacterium-mineral interaction mechanisms.The results showed that B.mucilaginosus could enhance silicate mineral weathering obviously.The weathering rates were quite different for various kinds of silicate minerals,and the weathering rate of weathered adamellite could reach 150 mg/m2/d.Although B.mucilaginosus produced little acidic substance,pH in the microenvironment of bacterium-mineral complex might be far lower than that of the circumjacent environment;a large amount of acetic acid was found in the metabolites,and was likely to play an important role as a ligand.These results appear to suggest that acidolysis and ligand degradation are the main mechanisms of B.mucilaginosus dissolving silicate minerals,the formation of bacterium-mineral complexes is the necessary condition for the bacteria weathering silicate minerals,and extracelluar polysaccharides played important roles in bacterium-mineral interaction processes by forming bacterium-mineral complexes and maintaining the spe-cial physicochemical properties of microenvironment.

Mechanism of influence of chloride ions on electrogenerative leaching of sulfide minerals

A dual cell system was used to study the influence of chloride ions on the electrogenerative leaching of sulfide minerals. The results show that the influences of chloride ions on a series of electrogenerative leaching system are similar, and chlorine ion is involved in the electrogenerative leaching process of sulfide minerals directly. The output power increases with the increase of Cl^- concentration. The influence on the electrogenerative leaching rate decreases when the Cl^- concentration reaches a certain value. The mechanisms of anodic reaction are deduced based on the reasonable hypothesis, and kinetic equations with respect to chlorine ions for each sulfide mineral are obtained. The kinetic equations show that when concentration of Cl^- is relatively low, the electrogenerative leaching rates are predicted to have 2/5,3/7,1/3 and 1/3 order dependence on Cl^- concentration for chalcopyrite concentrate,nickel concentrate, sphalerite and galena. As concentration of Cl^- increases, the correlative dependence of electrogenerative leaching rate on concentration of Cl^- becomes weak.

Analysis of soft rock mineral components and roadway failure mechanism

The mineral components and microstructure of soft rock sampled from roadway floor in Xiagou pit are determined by X ray diffraction and scanning electron microscope. Combined with the test of expansion and water softening property of the soft rock, the roadway failure mechanism is analyzed, and the reasonable repair supporting principle of roadway is put forward.

Advances in depressants for flotation separation of Cu–Fe sulfide minerals at low alkalinity:A critical review

The flotation separation of Cu–Fe sulfide minerals at low alkalinity can be achieved using selective depressants.In the flotation system of Cu–Fe sulfide minerals,depressants usually preferentially interact with the pyrite surface to render the mineral surface hydrophilic and hinder the adsorption of the collector.This review summarizes the advances in depressants for the flotation separation of Cu–Fe sulfide minerals at low alkalinity.These advances include use of inorganic depressants (oxidants and sulfur–oxygen compounds),natural polysaccharides (starch,dextrin,konjac glucomannan,and galactomannan),modified polymers (carboxymethyl cellulose,polyacrylamide,lignosulfonate,and tricarboxylate sodium starch),organic acids (polyglutamic acid,sodium humate,tannic acid,pyrogallic acid,salicylic acid,and lactic acid),sodium dimethyl dithiocarbamate,and diethylenetriamine.The potential application of specific inorganic and organic depressants in the flotation separation of Cu–Fe sulfide minerals at low alkalinity is reviewed.The advances in the use of organic depressants with respect to the flotation separation of Cu–Fe sulfide minerals are comprehensively detailed.Additionally,the depression performances and mechanisms of different types of organic depressants on mineral surfaces are summarized.Finally,several perspectives on depressants vis-à-vis flotation separation of Cu–Fe sulfide minerals at low alkalinity are proposed.

Mechanism of influence of ferric ion on electrogenerative leaching of sulfide minerals with FeCl_3

A dual cell system was used to study the influence of ferric ion on the electrogenerative leaching of sulfide minerals. Reaction mechanisms for the ferric chloride electrogenerative leaching of a series of sulfide minerals were proposed based on the data collected from the dual cell experiments. The influences of ferric ion on the electrogenerative leaching of sulfide minerals are similar. Ferric ion plays an important role on limiting the electrogenerative leaching rate at a relatively low concentration of FeCl3 (about less than 0.15 mol/L). The mathematical models based on the Butler-Volmer relation were delineated, and kinetic equations with respect to ferric ions for each sulfide mineral were obtained. The kinetic equations show that when the concentration of ferric ion is relatively low, the electrogenerative leaching rates are predicted to be proportional to 6/7, 4/5, 2/3 and 2/3 order of ferric ion for nickel concentrate, chalcopyrite concentrate, sphalerite and galena respectively. As the concentration of ferric ion increase, the correlative dependence between electrogenerative leaching rate and concentration of ferric ion becomes weak. The above conclusions are in agreement with the experimental results.

APPLICATION AND INTERACTION MECHANISMS OF POLYMERIC CARBOHYDRATE IN OXIDES AND SALT-TYPE MINERALS

A systematic analysis has been carried out to investigate the fields of application and interaction mechanism of polymeric carbohydrate, i.e. polysaccharides (including starch, dextrin, cellulose and cellulosic derivatives) on various oxides and salt-type minerals in the article, interaction mechanisms of electrostatic, of hydrogen bonding, and of chemical interaction between polymeric carbohydrate and these minerals are put forward.

Experimental Study of the Melting Reaction and Genetic Mechanism of Mineral Phase Transformation in Granulite Facies Metamorphism

The high-temperature and high-pressure experiment on natural block rock indicates that dehydration-melting of hydrous biotite (Bi) and partial melting of felsic minerals in garnet-biotite-plagioclase gneiss are mainly controlled by temperature, while mineral phase transformation is not only controlled by temperature-pressure conditions but also genetically associated with hydrous mineral dehydration-melting and partial melting of felsic minerals. According to the characteristics of biotite dehydration-melting and garnet transformation reaction, three stages may be distinguished: (1) when the experimental temperature is 700℃, biotite transforms to ilmenite (Ilm) + magnetite (Mt) + H2O and garnet to magnetite (Mt); (2) when the temperature is 730-760℃, biotite is dehydrated and melted and transformed into K2O-rich melt + Ilm + Mt, and garnet, into hypersthene (Hy) + cordierite (Crd); (3) when the temperature is up to or higher than 790℃, biotite is dehydrated and melted and transformed into melt + Hy + Ilm + Mt, and garnet, into the hypersthene (Hy) + spinel (Sp) + cordierite (Crd) assemblage. The melt proportion and its evolutionary characteristics are mainly controlled by dehydration-melting of hydrous minerals and partial melting of felsic minerals besides P-T conditiops: In addition to the traditional solid 4- solid (or fluid) reaction and dehydration-melting reaction, the metamorphic reaction involving melts (reaction between unmelted minerals and melts) is one of the most important reactions in granulite facies metamorphism and its attendant remelting (or regional migmatization). This experiment may provide dependable experimental data for an in-depth study of the genetic mechanism of mineral assemblage evolution and its geological dynamic significance in granulite facies metamorphism of the studied area.

Genetic Mechanism of Mineral Inclusions in Zircons from the Khondalite Series, Southeastern Inner Mongolia

The early Precambrian khondalite series is widely distributed in theJining-Zhuozi-Fengzhen-Liangcheng area, southeastern Inner Mongolia. The khondalite series mainlyconsists of sillimanite garnet potash feldspar (or two-feldspar) gneiss and garnet biotiteplagioclase gneiss. These gneissic rocks have commonly experienced granulite-facies metamorphism. Inzircons separated from sillimanite garnet potash feldspar gneisses, many mineral inclusions,including Sil, Grt, Ky, Kfs, Qtz and Ap, have been identified by the Laser Raman spectroscopy.Generally, prograde metamorphic mineral inclusion assemblages such as Ky + Kfs + Qtz + Ap and Ky +Grt + Kfs + Qtz are preserved in the core of zircon, while peak granulite-facies metamorphicminerals including Sil + Grt + Kfs + Qtz and Sil + Gif + Kfs + Qtz + Ap are identified in the mantleand rim of the same zircon. However, in some zircons are only preserved the peak metamorphicminerals such as Sil + Grt + Kfs + Qtz and Sil + Grt + Kfs + Qtz + Ap from core to rim, and inothers are inherited the primary cores with minor mineral inclusions of Kfs + Qtz, with peakmetamorphic mineral inclusions around the inherited cores. These data indicate that the mineralassemblage evolution of sillimanite garnet potash feldspar gneisses in the study are did experiencea polymorphic transformation of kyanite to sillimanite. In garnet biotite plagioclase gneisses,secondary electron microscopic images reveal that most zircons display distinct zoning textures,which comprise cores and rims, each with distinctive inclusion assemblages. The inherited mineralinclusions, mainly consisting of Kfs + Pl + Qtz, Kfs + Qtz and Kfs + Qtz + Ap, are preserved in theprimary cores, while peak granulite-facies mineral asemblages, including Grt + Bt + Pl + Qtz + Ap,Grt + Bt + Pl + Qtz and Grt + Bt + Pl + Qtz + Rt, are identified on the rims. The occurrence of peakmetamorphic mineral inclusions in zircons indicates that these gneissic rocks, includingsillimanite garnet potash feldspar gneiss and garnet biotite plagioclase gneiss, have experiencedgranulite-facies metamorphism. Secondary electron microscopic images of zircons from the khondaliteseries display distinct zoning from core to rim, and are genetically related to the primary,prograde, and peak metamorphic mineral inclusion assemblages respectively. These images revealirregular zoning patterns and varying thickness of cores and rims. The abundance of inclusionscomplicates the conventional U-Pb age dating. Therefore, the SHRIMP micro-spot U-Pb method isessential for the protolith and metamorphic age dating of the khondalite series, southeastern InnerMongolia.

The Mechanism of the Eeffect of Mineral Admixtures on the Expansion of Aalkali-silica Reaction

On the base of the influence rule of silica fume, slag and fly ash on alkali-silica reaction under the condition of 70 ℃, the mechanism of the effect of mineral admixtures on alkali-silica reaction is studied further in the paper. The results show that the effects of mineral admixtures on alkali-silica reaction are mainly chemistry effect and surface physichemistry effect. Under suitable condition, the chemistry effect may make alkali-silica reaction to be inhibited effectively, but the physichemistry effect only make alkali-silica reaction to be delayed. The chemistry effect and the physichemistry effect of minerals admixture are relative to the content of Ca（OH）2 in system. Under the condition that there is a large quantity of Ca（OH）2, mineral admixture cannot inhibit alkali-silica reaction effectively. Only when Ca（OH）2 in the system is very less, it is possible that mineral admixture inhibits alkali-silica reaction effectively.

INTERACTION MECHANISM OF AMPHOTERIC COLLECTOR-I WITH METALLIC IONS AND MINERALS

The electronic structure and bonding nature of adsorbing bonding complexes which consist of Amphoteric Collector-I and Mg^(2+), Ca^(2+), MgPO_4^-, CaPO_^-4, CaCO_3, as well aa MgCO_3, are studied using quantum chemistry CNDO/2, It is predicted that magnesium salts are more liable to form adsorbing chelates with Amphoteric Collector-I than calcium salts, and all results coincide with that obtained in flotation.