The recovery of lithium from hard rock minerals has received increased attention given the high demand for this element. There- fore, this study optimized an innovative process, which does not require a high-temperatu...The recovery of lithium from hard rock minerals has received increased attention given the high demand for this element. There- fore, this study optimized an innovative process, which does not require a high-temperature calcination step, for lithium extraction from le- pidolite. Mechanical activation and acid digestion were suggested as crucial process parameters, and experimental design and re- sponse-surface methodology were applied to model and optimize the proposed lithium extraction process. The promoting effect of amorphi- zation and the formation of lithium sulfate hydrate on lithium extraction yield were assessed. Several factor combinations led to extraction yields that exceeded 90%, indicating that the proposed process is an effective approach for lithium recovery.展开更多
Rechargeable aqueous zinc ion batteries(AZIBs)were considered as one of the most promising candidates for large-scale energy storage due to the merits of high safety and inexpensiveness.As AZIBs cathode material,Mn O_...Rechargeable aqueous zinc ion batteries(AZIBs)were considered as one of the most promising candidates for large-scale energy storage due to the merits of high safety and inexpensiveness.As AZIBs cathode material,Mn O_(2)possesses great merits but was greatly hindered due to the sluggish diffusion kinetic of Zn^(2+) during electrochemical operations.Herein,deep Zn^(2+) ions intercalatedδ-Mn O_(2)(Zn-Mn O_(2))was achieved by the in situ electrochemical deposition route,which significantly enhanced the diffusion ability of Zn^(2+) due to the synergistic effects of Zn^(2+) pillars and structural H;O.The resultant Zn-Mn O_(2)based AZIBs delivers a record capacity of 696 m Ah/g(0.5 m Ah/cm^(2))based on the initial mass loading,which is approaching the theoretical capacity of Mn O_(2)with a two-electrons reaction.In-situ Raman studies reveal highly reversible Zn^(2+)ions insertion/extraction behaviors and here the Zn-Mn O_(2)plays the role of a container during the charge–discharge process.Further charge storage mechanism investigations point out the insertion/extraction of Zn^(2+) and H^(+) coincides,and such process is significantly facilitated results from superior interlayered configurations of Zn-Mn O_(2)The excellent electrochemical performance of Zn-Mn O_(2)achieved in this work suggests the deep ions pre-intercalation strategy may aid in the future development of advanced cathodes for AZIBs.展开更多
The work distills the main mechanisms during the lithium insertion/extraction of LiFePO_4 cathode materials. The "diffusion-controlled" and "phase-boundary controlled" mechanism are especially illu...The work distills the main mechanisms during the lithium insertion/extraction of LiFePO_4 cathode materials. The "diffusion-controlled" and "phase-boundary controlled" mechanism are especially illustrated. Meanwhile, some recent observation and analyses by in-situ or in operando on the Li-insertion/extraction of LiFePO_4 are summarized and prospected.展开更多
The organic synergists, including Octanol, ethyl acetate(EA), butyl acetate(BA), methyl isobutyl ketone(MIBK),diisobutyl ketone(DIBK), N,N-bis(2-ethylhexyl) acetamide(N523) and 8-hydroxylquiolate, were added to the TB...The organic synergists, including Octanol, ethyl acetate(EA), butyl acetate(BA), methyl isobutyl ketone(MIBK),diisobutyl ketone(DIBK), N,N-bis(2-ethylhexyl) acetamide(N523) and 8-hydroxylquiolate, were added to the TBP–FeCl_3 extraction system to extract lithium from brine. The effects of concentration of organic synergist and total organic extractant, molar ratio of Fe/Li, phase ratio, counter-current extraction and the acidity of stripping agent on lithium extraction were investigated to optimize the extraction conditions. Under the optimize conditions, the results of counter-current extraction showed the mixed extraction system was the preponderance on the lithium extraction. Especially the separation of lithium in organic phase and aqueous phase and the separation mass ratio of Mg/Li increased greatly. An extraction mechanism was proposed based on the analysis of FT-IR spectra and Raman spectra.展开更多
An inverse spinel-type metal oxide, magnesium-manganese-titanium oxide （Mg2Mn0.5Ti0.5O4）, were prepared using the coprecipitation/thermal crystallization method. The extraction/insertion reaction with this material ...An inverse spinel-type metal oxide, magnesium-manganese-titanium oxide （Mg2Mn0.5Ti0.5O4）, were prepared using the coprecipitation/thermal crystallization method. The extraction/insertion reaction with this material was investigated by X-ray, saturation capacity of exchange, pH titration, and distribution coefficient （Kd） measurement. The acid treatments of Mg2Mn0.5Ti0.5O4 caused Mg^2＋ extractions of more than 81%, whereas the dissolutions of Mn^4＋ and Ti^4＋ were less than 10%. The experimental results proved that the acid-treated sample has a capacity of exchange 56 mg·g^-1 for Li^＋ in the solution. The chemical analysis showed that the Li^＋ extraction/insertion progressed mainly by ion-exchange mechanism and surface adsorption.展开更多
基金the doctorate grant ref.9244/13-1 supplied by CAPES Foundation,Ministry of Education of Brazil
文摘The recovery of lithium from hard rock minerals has received increased attention given the high demand for this element. There- fore, this study optimized an innovative process, which does not require a high-temperature calcination step, for lithium extraction from le- pidolite. Mechanical activation and acid digestion were suggested as crucial process parameters, and experimental design and re- sponse-surface methodology were applied to model and optimize the proposed lithium extraction process. The promoting effect of amorphi- zation and the formation of lithium sulfate hydrate on lithium extraction yield were assessed. Several factor combinations led to extraction yields that exceeded 90%, indicating that the proposed process is an effective approach for lithium recovery.
基金financially supported by the National Natural Science Foundation of China(Nos.51772138,51572118,and 51601082)the Fundamental Research Funds for the Central Universities(No.lzujbky-2020-59)。
文摘Rechargeable aqueous zinc ion batteries(AZIBs)were considered as one of the most promising candidates for large-scale energy storage due to the merits of high safety and inexpensiveness.As AZIBs cathode material,Mn O_(2)possesses great merits but was greatly hindered due to the sluggish diffusion kinetic of Zn^(2+) during electrochemical operations.Herein,deep Zn^(2+) ions intercalatedδ-Mn O_(2)(Zn-Mn O_(2))was achieved by the in situ electrochemical deposition route,which significantly enhanced the diffusion ability of Zn^(2+) due to the synergistic effects of Zn^(2+) pillars and structural H;O.The resultant Zn-Mn O_(2)based AZIBs delivers a record capacity of 696 m Ah/g(0.5 m Ah/cm^(2))based on the initial mass loading,which is approaching the theoretical capacity of Mn O_(2)with a two-electrons reaction.In-situ Raman studies reveal highly reversible Zn^(2+)ions insertion/extraction behaviors and here the Zn-Mn O_(2)plays the role of a container during the charge–discharge process.Further charge storage mechanism investigations point out the insertion/extraction of Zn^(2+) and H^(+) coincides,and such process is significantly facilitated results from superior interlayered configurations of Zn-Mn O_(2)The excellent electrochemical performance of Zn-Mn O_(2)achieved in this work suggests the deep ions pre-intercalation strategy may aid in the future development of advanced cathodes for AZIBs.
基金supported by the National Natural Science Foundation of China(No.51504196)Key Research and Development Plan of Shaanxi Province(No.2017ZDXM-GY-039)
文摘The work distills the main mechanisms during the lithium insertion/extraction of LiFePO_4 cathode materials. The "diffusion-controlled" and "phase-boundary controlled" mechanism are especially illustrated. Meanwhile, some recent observation and analyses by in-situ or in operando on the Li-insertion/extraction of LiFePO_4 are summarized and prospected.
基金Supported by Natural Science Foundation of China–Qaidam Salt Lake Chemical Joint Scientific Research Funds(U1407203)
文摘The organic synergists, including Octanol, ethyl acetate(EA), butyl acetate(BA), methyl isobutyl ketone(MIBK),diisobutyl ketone(DIBK), N,N-bis(2-ethylhexyl) acetamide(N523) and 8-hydroxylquiolate, were added to the TBP–FeCl_3 extraction system to extract lithium from brine. The effects of concentration of organic synergist and total organic extractant, molar ratio of Fe/Li, phase ratio, counter-current extraction and the acidity of stripping agent on lithium extraction were investigated to optimize the extraction conditions. Under the optimize conditions, the results of counter-current extraction showed the mixed extraction system was the preponderance on the lithium extraction. Especially the separation of lithium in organic phase and aqueous phase and the separation mass ratio of Mg/Li increased greatly. An extraction mechanism was proposed based on the analysis of FT-IR spectra and Raman spectra.
文摘An inverse spinel-type metal oxide, magnesium-manganese-titanium oxide （Mg2Mn0.5Ti0.5O4）, were prepared using the coprecipitation/thermal crystallization method. The extraction/insertion reaction with this material was investigated by X-ray, saturation capacity of exchange, pH titration, and distribution coefficient （Kd） measurement. The acid treatments of Mg2Mn0.5Ti0.5O4 caused Mg^2＋ extractions of more than 81%, whereas the dissolutions of Mn^4＋ and Ti^4＋ were less than 10%. The experimental results proved that the acid-treated sample has a capacity of exchange 56 mg·g^-1 for Li^＋ in the solution. The chemical analysis showed that the Li^＋ extraction/insertion progressed mainly by ion-exchange mechanism and surface adsorption.
