Mechanism of the self-excited oscillation pipeline flocculator

This paper presents the research on the dynamic mechanism of flocculation based on the characteristcs of turbulent flow. The shearing force and the centrifugal force transferred by the vortex are the main forces to cause collision of flocculated grains in water and the shearing force is the primary one. Based on this mechanism, a new type of self-excited oscillation pipeline flocculator is designed.

Research on modeling and self-excited vibration mechanism in magnetic levitation-collision interface coupling system

The modeling and self-excited vibration mechanism in the magnetic levitation-collision interface coupling system are investigated.The effects of the control and interface parameters on the system's stability are analyzed.The frequency range of self-excited vibrations is investigated from the energy point of view.The phenomenon of self-excited vibrations is elaborated with the phase trajectory.The corresponding control strategies are briefly analyzed with respect to the vibration mechanism.The results show that when the levitation objects collide with the mechanical interface,the system's vibration frequency becomes larger with the decrease in the collision gap;when the vibration frequency exceeds the critical frequency,the electromagnetic system continues to provide energy to the system,and the collision interface continuously dissipates energy so that the system enters the self-excited vibration state.

Experimental and Numerical Evaluation of the Cavitation Performances of Self-Excited Oscillating Jets

Self-excited oscillating jets(SOJ)are used in several practical applications.Their performances are significantly affected by structural parameters and the target distance.In this study,a geometric model of the SOJ nozzle accounting for multiple structural parameters is introduced,then the related cavitation performances and the optimal target distance are investigated using a Large-Eddy Simulation(LES)approach.Results are also provided about an experiment,which was conducted to validate the simulation results.By analyzing the evolution of the vapor volume fraction at the nozzle outlet,a discussion is presented about the effect of the aforementioned structural parameters on the cavitation performances and the target distance.It is shown that the distribution of cavitation clouds at the outlet of the SOJ nozzle displays a non-monotonic trend(first increasing,then decreasing).Under working conditions with an inlet pressure of 4 MPa,a SOJ nozzle outlet/inlet diameter ratio(D_(1)/D_(2))of 1.2,and a chamber diameter ratio(D/L)close to 1.8,the nozzle outlet cavitation performance attains a maximum.The optimal structural parameters correspond to the optimal target distance,which is near 50 mm.The experiments have revealed that the SOJ nozzle with the above parameters displays a good cavitation erosion effect at the target distance of 50 mm,in satisfactory agreement with the numerical simulation results.

THEORY AND EXPERIMENTAL STUDY OF THE SELF-EXCITED OSCILLATION PULSED JET NOZZLE

Comparing with usual continuous jet nozzle, the self-excited oscillationpulsed jet nozzle SEOPJN) can make jet generate a higher peak of pressure and larger scouringvolume. And it can make jet increase the effective standoff distance, too. The basic theories of theSEOPJN are introduced. Some experimental results are shown. According to the results, using tricornbits assembled the SEOPJN to drill oil well, the ROP increases by 8 percent approx 77 percent, andthe rates of the footage for tricorn bit increases by 6.7 percent approx 44.0 percent.

A Further Inquiry on the Mechanism of 30-60 Day Oscillation in the Tropical Atmosphere

In a simple semi-geostropic model on the equatorial β-plane, the theoretical analysis on the 30-60 day oscillation in the tropical atmosphere is further discussed based on the wave-CISK mechanism. The convection heating can excite the CISK-Kelvm wave and CISK-Rossby wave in the tropical atmosphere and they are all the low-frequency modes which drive the activities of 30-60 day oscillation in the tropics. The most favorable conditions to excite the CISK-Kelvin wave and CISK-Rossby wave are indicated: There is convection heating but not very strong in the atmosphere and there is weaker disturbance in the lower troposphere.The influences of vertical shearing of basic flow in the troposphere on the 30-60 day oscillation in the tropics are also discussed.

The Theory and Experimental Study of the Self-Excited Oscillation Pulsed Jet Nozzle (Pipeline Pulsed Flow Generator)

In this paper, the basic theories of the Self-excited Oscillation Pulsed Jet Nozzle (SEOPJN) invented by the authors are introduced. Then, some experimental results are shown. According to the results, using tricorn bits assembled the SEOPJN to drill oil well, the rate of penetration (ROP) increases by 8% - 77%, and the rate of the footage for tricorn bit increases by 6.7% - 44%. Although the test was conducted in the water, good result was got in nature gas transportation. The volume of gas transportation could be increased by the Self-excited Oscillation Pulsed generator while the gas pressure drop could be decreased, since it significantly reduced the pressure loss during gas transportation.

Side force control on slender body by self-excited oscillation flag

Strong asymmetrical vortices appear on the leeward of slender body at high angles of attack, which has very unfavorable effect on the stability and control of the aircraft. A method is developed to control the side force of slender body at high angles of attack, and is verified in wind tunnel. A thin-film triangular self-excited oscillation flag is fixed at the tip of the slender body model whose semi-apex angle is 10°. Side force is approximately linearly proportional to roll-setting angle of self-excited oscillation flag at high angles of attack, and the slop of fitting straight line obtained by the least square method is -0.158. The linear relationship between side force and roU-setting angle provides convenience for developing side force control law of slender body at high angles of attack. Experimental data shows that the side force coefficients vary linearly with roll-setting angles when a specific plastic self-excited oscillation flag is used as the control flag. The range of side force coefficient and roll-setting angle are, respectively, -3.2 to 3.0 and -20° to 20°. The device is simple, effective, and is of great potential in engineering application.

Impact frequency variation of self-excited oscillation pulsed supercritical carbon dioxide jets

In order to obtain the impact frequency of resonant coal breaking by self-excited oscillation pulsed supercritical carbon dioxide(SC-CO_(2))jet,large eddy simulation was used to analyze the formation and development process of self-excited oscillation pulsed SC-CO_(2)jet,the variation of jet impact frequency in the nozzle and the free flow field,and the variation of jet impact frequency at different positions in the jet axis and under different cavity lengths.The test device of jet impact frequency was developed,and experiments were performed to verify the conclusions of the numerical simulations.The results show that the frequency of the self-excited oscillation pulsed SC-CO_(2)jet is different in the nozzle and the free flow field.In the nozzle,the frequency generated by the fluid disturbance is the same,and the jet frequency at the exit of the nozzle is consistent with that inside the nozzle.In the free flow field,due to the compressibility of CO_(2),the pressure,velocity and other parameters of SC-CO_(2)jets have obvious fluctuation patterns.This feature causes the impact frequency of the self-excited oscillation pulsed SC-CO_(2)jet to decrease gradually in the axis.Changing the cavity length allows the adjustment of the jet impact frequency in the free flow field by affecting the disturbance frequency of the self-excited oscillation pulsed SC-CO_(2)jet inside the nozzle.

Bursting phenomena as well as the bifurcation mechanism in a coupled BVP oscillator with periodic excitation

We explore the complicated bursting oscillations as well as the mechanism in a high-dimensional dynamical system.By introducing a periodically changed electrical power source in a coupled BVP oscillator, a fifth-order vector field with two scales in frequency domain is established when an order gap exists between the natural frequency and the exciting frequency.Upon the analysis of the generalized autonomous system, bifurcation sets are derived, which divide the parameter space into several regions associated with different types of dynamical behaviors. Two typical cases are focused on as examples,in which different types of bursting oscillations such as sub Hopf/sub Hopf burster, sub Hopf/fold-cycle burster, and doublefold/fold burster can be observed. By employing the transformed phase portraits, the bifurcation mechanism of the bursting oscillations is presented, which reveals that different bifurcations occurring at the transition between the quiescent states（QSs） and the repetitive spiking states（SPs） may result in different forms of bursting oscillations. Furthermore, because of the inertia of the movement, delay may exist between the locations of the bifurcation points on the trajectory and the bifurcation points obtained theoretically.

Analysis of the Oscillating Mechanism of an Aerial Work Platform Based on ADAMS Hydraulic-Mechanical Coupling Simulation

Rigid model of the aerial work platform and hydraulic model of the oscillating mechanism were established with ADAMS. The simulation of two parameters, cy-linder force and oil chamber pressure, was carried out. The simulation result is useful to the design of the oscillating mechanism.

Complex dynamics of an archetypal self-excited SD oscillator driven by moving belt friction

We propose an archetypal self-excited system driven by moving belt friction, which is constructed with the smooth and discontinuous （SD） oscillator proposed by the Cao et al. and the classical moving belt. The moving belt friction is modeled as the Coulomb friction to formulate the mathematical model of the proposed self-excited SD oscillator. The equilibrium states of the unperturbed system are obtained to show the complex equilibrium bifurcations. Phase portraits are depicted to present the hyperbolic structure transition, the multiple stick regions, and the friction-induced asymmetry phenomena. The numerical simulations are carried out to demonstrate the friction-induced vibration of multiple stick-slip phenomena and the stick-slip chaos in the perturbed self-excited system. The results presented here provide an opportunity for us to get insight into the mechanism of the complex friction-induced nonlinear dynamics in mechanical engineering and geography.

A Kinetic Evidence for the Nitroxyl Radicals Recycling Mechanism in the Photostabilizing Process of HALS

The photoinduced bulk polymerization of a reactive-hindered amine light stabilizers (r-HALS), 4-acryloyl-2, 2, 6,6-tetramethylpiperidinyl (ATMP), was performed at 80 C by using a DPC technique. An unique periodic exponential attenuation-type oscillating curve was found when the polymerization was carried out in air, but this phenomenon was not found in nitrogen. It is supposed that this unique kinetic performance may be attributed to nitroxyl radicals that are produced in situ from the oxidation of ATMP. ATMP polymer with narrow polydispersity (d = 1.03) can be obtained by photoinduced solution polymerization of ATMP. The signal detected in ESR may be assigned to the nitroxyl radicals in the matrix of ATMP polymer. Since this kind of recycling of nitroxyl radicals is well documented for the photostabilizing mechanism of HALS, the present results may serve as a kinetic evidence for this mechanism.

RELATIONSHIP BETWEEN THE SEASONAL TRANSITION OF EAST ASIAN MONSOON CIRCULATION AND ASIAN-PACIFIC THERMAL FIELD AND POSSIBLE MECHANISMS

The NCEP/NCAR reanalysis, CMAP rainfall and Hadley Centre sea surface temperature(SST) datasets are used to investigate the relationship between the seasonal transition of East Asian monsoon and Asian-Pacific thermal contrast, together with the possible causes. Based on the 250 h Pa air temperature over two selected key areas, the Asian-Pacific thermal difference(APTD) index is calculated. Results show that the APTD index is highly consistent with the Asian-Pacific Oscillation(APO) index defined by Zhao et al., in terms of different key areas in different seasons. Moreover, the time point of the seasonal transition of the Asian-Pacific thermal contrast can be well determined by the APTD index, indicative of seasonal variation in East Asian atmospheric circulation from winter to summer. The transition characteristic of the circulation can be summarized as follows. The continental cold high at lower tropospheric level moves eastward to the East China Sea and decreases rapidly in intensity, while the low-level northerlies turn to southerlies. At middle tropospheric level, the East Asia major trough is reduced and moves eastward. Furthermore, the subtropical high strengthens and appears near Philippines. The South Asia high shifts from the east of Philippines to the west of Indochina Peninsula, and the prevailing southerlies change into northerlies in upper troposphere. Meanwhile,both the westerly and easterly jets both jump to the north. The seasonal transition of atmospheric circulation is closely related to the thermal contrast, and the possible mechanism can be concluded as follows. Under the background of the APTD seasonal transition, the southerly wind appears firstly at lower troposphere, which triggers the ascending motion via changing vertical shear of meridional winds. The resultant latent heating accelerates the transition of heating pattern from winter to summer. The summer heating pattern can further promote the adjustment of circulation, which favors the formation and strengthening of the low-level southerly and upper-level northerly winds. As a result, the meridional circulation of the East Asian subtropical monsoon is established through a positive feedback between the circulation and thermal fields. Moreover, the time point of this seasonal transition has a significant positive correlation with the SST anomalies over the tropical central-eastern Pacific Ocean, providing a basis for the short-term climate prediction.

HARMONIC, SUBHARMONIC, SUPERHARMONIC, SIMULTANEOUS SUB/SUPER HARMONIC AND COMBINATION RESONANCES OF SELF-EXCITED TWO COUPLED SECOND ORDER SYSTEMS TO MULTI-FREQUENCY EXCITATION

Harmonic, subharmonic, superharmonic, simultaneous sub/super harmonic, and combination resonances of the additive type of self-excited two coupled-second order systems to multi-frequency excitation are investigated. The theoretical results are obtained by the multiple-scales method. The steady state amplitudes for each resonance are plotted, showing the influence of the different parameters. Analysis for each figure is given. Approximate solution corresponding to each type of resonance is determined. Stability analyses are carried out for each case.

Characteristics of Oscillation in Cavity of Helmholtz Nozzle Generating Self‑excited Pulsed Waterjet

Cavity flow oscillations in the axisymmetric cavity are critical to the operating efficiency of self-excited pulsed waterjets,which are widely employed in many practical applications.In this study,the behaviors of a turbulent flow in axisymmetric cavities causing cavity flow oscillations are investigated based on wall pressure characteristics.Experiments are performed using four Helmholtz nozzles with varying length-to-radius ratios at flow velocities of 20–80 m/s.Three orders of hydrodynamic modes in axisymmetric cavity are obtained through the spectral analysis of wall pressure.Based on the experimental results,the empirical coefficient of Rossiter’s formula is modified,and the values of the parameter phase lag and the ratio of convection velocity to free stream velocity are obtained as 0.061 and 0.511,respectively.In addition,the spectral peak with a relatively constant frequency shows that the flow-acoustic resonance is excited significantly.A modified model is introduced based on the fluidic networks to predict the lockon frequency.The results obtained can provide a basis for the structural optimization of the nozzle to improve the performance of self-excited pulsed waterjets.

Analysis and Prevention for Oscillation Failure of Capacitive Micro-accelerometers

As actuator of the force-rebalanced servo loop, the electrostatic force generator of the micro-accelerometer shows high nonlinearity while the interpole of the micro-electro-mechanical system（MEMS） sensor is far away from its balance position. The control system cannot rebalance itself with the limited bandwidth after an external long overload, because the characteristics of the force generator differ from normal case. Although for similar problems, solutions with cascading lead-lag blocks, with the anti-windup（AW） technology, or with the sliding-mode control, are widely reported, the problems such as performance loss or difficulty to synthesize a digital controller still remain. Based on existing researches, remedies are developed by analyzing the characteristic of the system not only near the balance position, but also corresponding to the whole moveable range of the interpole, and a new controller is proposed. The solution is compared with the common solutions of cascading lead-lag blocks method, AW methods, and sliding mode methods. Comparison results show that the proposed solution avoid performance loss, compared to cascading lead-lag blocks solution; the proposed solution is easily synthesized and implemented in the analog servo loop of the micro-accelerometer, compared to digital AW methods; at the same time, the proposed solution avoids suffering the chattering effect problem but just utilize it, compared to the sliding-mode control solution. Nevertheless, comparison results show the solution is lack of commonality, since the solution is only more suitable to micro electrostatic force-rebalance system. The SIMULINK models with and without the proposed solution, taking typical micro-accelerometer parameters, have been set up for simulation; corresponding experiments utilizing electrometric method are also conducted after the successful simulations. Simulation and experiment results verify that the micro-accelerometer will reliably return to normal operation after external long overload with the proposed solution. Therefore, it is expected to design the analog servo loop of high performance micro electrostatic force-rebalance system so as to ensure the rebalance after long overload without performance loss.

Horizontal Slow Oscillation of a Moored Tanker and Numerical Method of Hopf-Bifurcation

In this paper, a six-order nonlinear dynamic model with three degrees of freedom is presented for the study of the 'fishtail' motion of a Single Point Mooring System. The effect of parameter variations on the equilibrium state of the system is analyzed. In order to study the stability of the equilibrium state, the mooring-line length l is chosen as a bifurcation parameter, so that all eigenvalues of the Jacobian matrix under different parameters can be worked out, and then the Hopf-bifurcation point can be found. Finally, the Hopf-bifurcation periodic solution of the system is computed.

Superconducting membrane mechanical oscillator based on vacuum-gap capacitor

Using the diluted S1813 UV photoresist as a sacrificial layer, we successfully fabricate a superconducting suspended parallel-plate capacitor, in which the top layer of aluminum film acts as a membrane mechanical resonator. Together with a superconducting octagonal spiral inductor, this parallel-plate capacitor constitutes a superconducting microwave resonator. At m K temperature, the transmission characteristic and spectrum of the microwave resonator are measured.Sideband frequencies caused by the vibration of the membrane mechanical resonator are clearly demonstrated. By downconverting with a mixer, the dependence of fundamental frequency and its harmonics on the input microwave power are clearly demonstrated, which is consistent with the numerical simulation.

Oscillating Mechanical Stimulation of the Craniocervical Region as Physical Therapy for Chronic Migraine: A Pilot Trial

Objective: We conducted a prospective trial of oscillating mechanical stimulation (OS) of the craniocervical region as treatment for drug-refractory chronic migraine (CM). Methods: Ten patients (8 women, 2 men;mean age 47.0 ±15.1 years) were enrolled. The treatment was administered over an 8-week period to 13, 4, and 9 sites on the face and head, neck, and upper back, respectively, at 5- to 15-pound intensity. The primary outcome measure was the number of days patients suffered a migraine (hereafter “number of migraine days”), and the secondary outcome measures were the six-item Headache Impact Test (HIT-6) and Visual Analog Scale (VAS) scores for migraine pain intensity and the nine-item Patient Health Questionnaire (PHQ-9) and the seven-item Generalized Anxiety Disorder (GAD-7) scale scores. Results: Nine patients completed treatment. The number of migraine days remained unchanged, from a mean 21.7 ±11.6 days/month before treatment to 19.3 ±7.3 days/month upon completion of treatment. However, the HIT-6 scores improved from 67.0 ±8.2 to 61.4 ±7.1 (p = 0.007) after 3 weeks, 61.1 ±11.5 (p = 0.01) after 6 weeks, and 59.9 ±11.6 (p = 0.035) upon completion of treatment. Similarly, the VAS scores improved significantly from 7.3 ±1.7 to 5.7 ±3.1 (p = 0.018) at 6 weeks and 4.8 ±2.8 (p = 0.011) upon completion of treatment. The GAD-7, PHQ-9, and allodynia scale scores remained unchanged. Conclusion: Our data suggest that OS is well tolerated and may become a feasible form of treatment for drug-resistant CM.

Turn Control of a Three-Dimensional Quasi-Passive Walking Robot by Utilizing a Mechanical Oscillator

A turn control strategy is proposed in order to improve environmental adaptability of a quasi-passive walking robot by utilizing a mechanical oscillator. The target trajectory of the fmechanical oscillator is determined by online planning of its period, phase, amplitude and angle of the central axis of oscillation. The motion of the mechanical oscillator is always entrained with the rocking motion of the robot based on forced entrainment in order to stabilize the robot. The turn radius can be controlled by adjusting the inclination angle of the central axis of the mechanical oscillator movement, and the control method is numerically and experimentally examined. Results show that the robot can turn with different radius and it is possible for the robot to walk in various environments. Finally, the gait of turn is compared with that of straight walking and analyzed in terms of mechanical work and energy.