Research progress on mechanism of Chinese material medica in preventing and treating insulin resistance and type 2 diabetes mellitus

Insulin resistance(IR)is a significant feature and one of the basic links in the pathogenesis of type 2 diabetes mellitus(T2DM).Chinese material medica(CMM)has promoted the development of traditional Chinese medicine due to its definite clinical efficacy in the treatment of IR and T2DM.However,owing to the fact that the mechanism of CMM is characterized by“multiple components and multiple targets”,which has not been effectively interpreted,result in the scientificity of clinical efficacy with CMM is controversial.Therefore,this article summarized the mechanisms of CMM and its main active components in improving IR and preventing and treating T2DM,whose aim is to provide valuable reference for the research mechanism on the treatment of IR and T2DM.

Deformation mechanism of roadways in deep soft rock at Hegang Xing’an Coal Mine

Engineering geomechanics characteristics of roadways in deep soft rock at Hegang Xing'an Coal Mine were studied and the nature of clay minerals of roadway surrounding rock was analyzed. This paper is to solve the technical problems of high stress and the difficulty in supporting the coal mine, and provide a rule for the support design. Results show that mechanical deformation mechanisms of deep soft rock roadway at Xing'an Coal Mine is of ⅠABⅡABCⅢABCD type, consisting of molecular water absorption (the ⅠAB -type), the tectonic stress type + gravity deformation type + hydraulic type (the ⅡABC -type), and the ⅢABCD -type with fault, weak intercalation and bedding formation. According to the compound mechanical deformation mechanisms, the corresponding mechanical control measures and conversion technologies were proposed, and these technologies have been successfully applied in roadway supporting practice in deep soft rock at Xing'an Coal Mine with good effect. Xing'an Coal Mine has the deepest burial depth in China, with its overburden ranging from Mesozoic Jurassic coal-forming to now. The results of the research can be used as guidance in the design of roadway support in soft rock.

Global test of seismic static stress triggering model

Seismic static stress triggering model is tested using Harvard centroid moment tensor (CMT) solution catalogue of 1976~2000 and concept of earthquake doublet. Result shows that seismic static stress triggering effect does exist in the view of global earthquakes, but the effect is very weak. Dividing the earthquakes into thrust focal mechanism, normal focal mechanism, strike-slip focal mechanism, we find that non-strike-slip focal mechanism earthquakes have significant triggering effect, whereas, the triggering effect in strike-slip focal mechanism earthquakes is not obvious. Divided the subsequent events delay time of earthquake doublet into 5 classes of t1, t<1, t10, t<10, 1t10 (t is in unit of d), then seismic static stress triggering effect does not change with delay time in short time period after earthquakes. The research on seismic static stress triggering in different regions of the world indicates that triggering effect is significant in subduction belts. Seismic static stress triggering model is tested by using earthquake doublets in China and its adjacent region. The result indicates that seismic static stress triggering effect cannot be observed easily in China and its adjacent region due to the seismic focal mechanism type (most of the earthquakes are strike-slip earthquakes).

Structural Design and Control Strategy Analysis of Micro/Nano Transmission Platform

A fully flexure micro/nano transmission platform(MNTP)which has five degrees of freedom is designed on the basis of bridge type amplification mechanism.According to the kinematic theory and the elastic beam theory,the theoretical output displacement equation of the platform is derived,and then piezoelectric actuator(PZT)is calibrated.Meanwhile,a full closed-loop control strategy of the platform is established using the feedforward proportional-integral-derivative(PID)compound control algorithm based on the Preisach model.Moreover,the total transfer function of the micro positioning system is derived,and the calculation method of output signal is acquired.Finally,the theoretical output displacement is verified by finite element analysis(FEA)and positioning experiments.

Effect of martensitic transformation on nano/ultrafine-grained structure in 304 austenitic stainless steel

304 austenitic stainless steel was cold rolled in the range of 20%-80%reductions and then annealed at 700-900°C for 60 sto obtain nano/ultrafine-grained（NG/UFG）structure.Transmission electron microscopy,electron backscatter diffraction and X-ray diffraction were used to characterize the resulting microstructures.The results showed that with the increase of cold reduction,the content of martensite was increased.The steel performed work hardening during cold-working owing to the occurrence of strain induced martensite which nucleated in single shear bands.Further rolling broke up the lath-type martensite into dislocation-cell type martensite because of the formation of slip bands.Samples annealed at 800-960°C for 60 swere of NG/UFG structure with different percentage of nanocrystalline（60-100 nm）and ultrafine（100-500 nm）grains,submicron size（500-1000 nm）grains and micron size（〉1000 nm）grains.The value of the Gibbs free energy exhibited that the reversion mechanism of the reversion process was shear controlled by the annealing temperature.For a certain annealing time during the reversion process,austenite nucleated first on dislocation-cell type martensite and the grains grew up subsequently and eventually to be micrometer/submicrometer grains,while the nucleation of austenite on lath-type martensite occurred later resulting in nanocrystalline/ultrafine grains.The existence of the NG/UFG structure led to a higher strength and toughness during tensile test.